aboutsummaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-01qapi: rename input buttonsGerd Hoffmann1-1/+1
All lowercase, use-dash instead of CamelCase. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-04all: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-01-13error: Use error_report_err() instead of monitor_printf()Markus Armbruster1-4/+2
Both error_report_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_report_err() reports to stderr. Most changed functions are HMP command handlers. These should only run within an HMP monitor. The one exception is bdrv_password_cb(), which should also only run within an HMP monitor. Four command handlers prefix the error message with the command name: balloon, migrate_set_capability, migrate_set_parameter, migrate. Pointless, drop. Unlike monitor_printf(), error_report_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00). Example: (qemu) device_add ivshmem,id=666 Parameter 'id' expects an identifier Identifiers consist of letters, digits, '-', '.', '_', starting with a letter. Try "help device_add" for more information The "Identifiers consist of..." line is new with this patch. Coccinelle semantic patch: @@ expression M, E; @@ - monitor_printf(M, "%s\n", error_get_pretty(E)); - error_free(E); + error_report_err(E); @r1@ expression M, E; format F; position p; @@ - monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p - error_free(E); + error_report_err(E); @script:python@ p << r1.p; @@ print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
2015-12-17qapi: Change munging of CamelCase enum valuesEric Blake1-1/+1
When munging enum values, the fact that we were passing the entire prefix + value through camel_to_upper() meant that enum values spelled with CamelCase could be turned into CAMEL_CASE. However, this provides a potential collision (both OneTwo and One-Two would munge into ONE_TWO) for enum types, when the same two names are valid side-by-side as QAPI member names. By changing the generation of enum constants to always be prefix + '_' + c_name(value, False).upper(), and ensuring that there are no case collisions (in the next patches), we no longer have to worry about names that would be distinct as QAPI members but collide as variant tag names, without having to think about what munging the heuristics in camel_to_upper() will actually perform on an enum value. Making the change will affect enums that did not follow coding conventions, using 'CamelCase' rather than desired 'lower-case'. Thankfully, there are only two culprits: InputButton and ErrorClass. We already tweaked ErrorClass to make it an alias of QapiErrorClass, where only the alias needs changing rather than the whole tree. So the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part of this commit may later need reverting if we rename the enum constants from 'WheelUp' to 'wheel-up' as part of moving x-input-send-event to a stable interface; but at least we have documentation bread crumbs in place to remind us (commit 513e7cd), and it matches the fact that SDL constants are also spelled SDL_BUTTON_WHEELUP. Suggested by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17qapi: Add alias for ErrorClassEric Blake1-1/+1
The qapi enum ErrorClass is unusual that it uses 'CamelCase' names, contrary to our documented convention of preferring 'lower-case'. However, this enum is entrenched in the API; we cannot change what strings QMP outputs. Meanwhile, we want to simplify how c_enum_const() is used to generate enum constants, by moving away from the heuristics of camel_to_upper() to a more straightforward c_name(N).upper() - but doing so will rename all of the ErrorClass constants and cause churn to all client files, where the new names are aesthetically less pleasing (ERROR_CLASS_DEVICENOTFOUND looks like we can't make up our minds on whether to break between words). So as always in computer science, solve the problem by some more indirection: rename the qapi type to QapiErrorClass, and add a new enum ErrorClass in error.h whose members are aliases of the qapi type, but with the spelling expected elsewhere in the tree. Then, when c_enum_const() changes the munging, we only have to adjust the one alias spot. Suggested by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-26-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake1-7/+7
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-26qjson: store tokens in a GQueuePaolo Bonzini1-1/+1
Even though we still have the "streamer" concept, the tokens can now be deleted as they are read. While doing so convert from QList to GQueue, since the next step will make tokens not a QObject and we will have to do the conversion anyway. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26monitor: Plug memory leak on QMP errorMarkus Armbruster1-0/+1
Leak introduced in commit 8a4f501..710aec9, v2.4.0. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1446117309-15322-1-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-11-12monitor/target-ppc: Define target_get_monitor_defAlexey Kardashevskiy1-1/+9
At the moment get_monitor_def() returns only registers from statically defined monitor_defs array. However there is a lot of BOOK3S SPRs which are not in the list and cannot be printed from the monitor. This adds a new target platform hook - target_get_monitor_def(). The hook is called if a register was not found in the static array returned by the target_monitor_defs() hook. The hook is only defined for POWERPC, it returns registered SPRs and fails on unregistered ones providing the user with information on what is actually supported on the running CPU. The register value is saved as uint64_t as it is the biggest supported register size; target_ulong cannot be used because of the stub - it is in a "common" code and cannot include "cpu.h", etc; this is also why the hook prototype is redefined in the stub instead of being included from some header. This replaces static descriptors for GPRs, FPRs, SRs with a helper which looks for a value in a corresponding array in the CPUPPCState. The immediate effect is that all 32 SRs can be printed now (instead of 16); later this can be reused for VSX or TM registers. This replaces callbacks for MSR and XER with static descriptors in monitor_defs as they are stored in CPUPPCState. While we are here, this adds "cr" as a synonym of "ccr". Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-09monitor: add missed aio_context_acquire into vm_completion callDenis V. Lunev1-3/+8
Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Luiz Capitulino <lcapitulino@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-30monitor: Throttle event VSERPORT_CHANGE separately by "id"Markus Armbruster1-4/+23
VSERPORT_CHANGE is emitted when the guest opens or closes a virtio-serial port. The event's member "id" identifies the port. When several events arrive quickly, throttling drops all but the last of them. Because of that, a QMP client must assume that *any* port may have changed state when it receives a VSERPORT_CHANGE event and throttling may have happened. Make the event more useful by throttling it for each port separately. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1444921716-9511-7-git-send-email-armbru@redhat.com>
2015-10-30monitor: Turn monitor_qapi_event_state[] into a hash tableMarkus Armbruster1-16/+37
In preparation of finer grained throttling. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1444921716-9511-6-git-send-email-armbru@redhat.com>
2015-10-29monitor: Split MonitorQAPIEventConf off MonitorQAPIEventStateMarkus Armbruster1-41/+37
In preparation of turning monitor_qapi_event_state[] into a hash table for finer grained throttling. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1444921716-9511-5-git-send-email-armbru@redhat.com>
2015-10-29monitor: Switch from timer_new() to timer_new_ns()Markus Armbruster1-4/+3
We don't actually care for the scale, so we can just as well use the simpler interface. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444921716-9511-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-10-29monitor: Simplify event throttlingMarkus Armbruster1-33/+30
The event throttling state machine is hard to understand. I'm not sure it's entirely correct. Rewrite it in a more straightforward manner: State 1: No event sent recently (less than evconf->rate ns ago) Invariant: evstate->timer is not pending, evstate->qdict is null On event: send event, arm timer, goto state 2 State 2: Event sent recently, no additional event being delayed Invariant: evstate->timer is pending, evstate->qdict is null On event: store it in evstate->qdict, goto state 3 On timer: goto state 1 State 3: Event sent recently, additional event being delayed Invariant: evstate->timer is pending, evstate->qdict is non-null On event: store it in evstate->qdict, goto state 3 On timer: send evstate->qdict, clear evstate->qdict, arm timer, goto state 2 Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444921716-9511-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-10-29monitor: Reduce casting of QAPI event QDictMarkus Armbruster1-19/+19
Make the variables holding the event QDict instead of QObject. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1444921716-9511-2-git-send-email-armbru@redhat.com>
2015-10-23block: Prepare for NULL BDSMax Reitz1-0/+4
blk_bs() will not necessarily return a non-NULL value any more (unless blk_is_available() is true or it can be assumed to otherwise, e.g. because it is called immediately after a successful blk_new_with_bs() or blk_new_open()). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-25monitor: make monitor_fprintf and mon_get_cpu externally visiblePavel Butsykin1-3/+2
monitor_fprintf and mon_get_cpu will be used in the target-specific monitor, so it is advisable to make it external. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25utils: rename strtosz to use qemu prefixMarc-André Lureau1-1/+1
Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-21qapi: New QMP command query-qmp-schema for QMP introspectionMarkus Armbruster1-0/+16
qapi/introspect.json defines the introspection schema. It's designed for QMP introspection, but should do for similar uses, such as QGA. The introspection schema does not reflect all the rules and restrictions that apply to QAPI schemata. A valid QAPI schema has an introspection value conforming to the introspection schema, but the converse is not true. Introspection lowers away a number of schema details, and makes implicit things explicit: * The built-in types are declared with their JSON type. All integer types are mapped to 'int', because how many bits we use internally is an implementation detail. It could be pressed into external interface service as very approximate range information, but that's a bad idea. If we need range information, we better do it properly. * Implicit type definitions are made explicit, and given auto-generated names: - Array types, named by appending "List" to the name of their element type, like in generated C. - The enumeration types implicitly defined by simple union types, named by appending "Kind" to the name of their simple union type, like in generated C. - Types that don't occur in generated C. Their names start with ':' so they don't clash with the user's names. * All type references are by name. * The struct and union types are generalized into an object type. * Base types are flattened. * Commands take a single argument and return a single result. Dictionary argument or list result is an implicit type definition. The empty object type is used when a command takes no arguments or produces no results. The argument is always of object type, but the introspection schema doesn't reflect that. The 'gen': false directive is omitted as implementation detail. The 'success-response' directive is omitted as well for now, even though it's not an implementation detail, because it's not used by QMP. * Events carry a single data value. Implicit type definition and empty object type use, just like for commands. The value is of object type, but the introspection schema doesn't reflect that. * Types not used by commands or events are omitted. Indirect use counts as use. * Optional members have a default, which can only be null right now Instead of a mandatory "optional" flag, we have an optional default. No default means mandatory, default null means optional without default value. Non-null is available for optional with default (possible future extension). * Clients should *not* look up types by name, because type names are not ABI. Look up the command or event you're interested in, then follow the references. TODO Should we hide the type names to eliminate the temptation? New generator scripts/qapi-introspect.py computes an introspection value for its input, and generates a C variable holding it. It can generate awfully long lines. Marked TODO. A new test-qmp-input-visitor test case feeds its result for both tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a QmpInputVisitor to verify it actually conforms to the schema. New QMP command query-qmp-schema takes its return value from that variable. Its reply is some 85KiBytes for me right now. If this turns out to be too much, we have a couple of options: * We can use shorter names in the JSON. Not the QMP style. * Optionally return the sub-schema for commands and events given as arguments. Right now qmp_query_schema() sends the string literal computed by qmp-introspect.py. To compute sub-schema at run time, we'd have to duplicate parts of qapi-introspect.py in C. Unattractive. * Let clients cache the output of query-qmp-schema. It changes only on QEMU upgrades, i.e. rarely. Provide a command query-qmp-schema-hash. Clients can have a cache indexed by hash, and re-query the schema only when they don't have it cached. Even simpler: put the hash in the QMP greeting. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-21qapi: Rename qmp_marshal_input_FOO() to qmp_marshal_FOO()Markus Armbruster1-1/+1
These functions marshal both input and output. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1442401589-24189-17-git-send-email-armbru@redhat.com>
2015-09-16monitor: uninclude cpu_ldstPeter Crosthwaite1-1/+0
This header is non-needed anymore and wont work in multi-arch where this service is not provided to core code. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <4e96622ab5320603829b6f94b8c4e94d573d34fc.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16monitor: remove target-specific code from monitor.cPavel Butsykin1-852/+8
Move target-specific code out of /monitor.c to /target-*/monitor.c, this will avoid code cluttering and using random ifdeffery. The solution is quite simple, but solves the issue of the separation of target-specific code from monitor. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16hmp-commands-info: move info_cmds content out of monitor.cPavel Butsykin1-387/+2
For moving target- and device-specific code from monitor.c, to beginning we move info_cmds content to hmp-commands-info.hx Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang1-0/+7
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-03Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+20
into staging # gpg: Signature made Thu 03 Sep 2015 15:46:52 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/tracing-pull-request: trace-events: Add hmp completion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-03trace-events: Add hmp completionDr. David Alan Gilbert1-0/+20
Add completion for the trace event names in the hmp trace-event command. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-03s390x: Info skeys sub-commandJason J. Herne1-0/+9
Provide an info skeys hmp sub-command to allow the end user to dump a storage key for a given address. This is useful for guest operating system developers. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03s390x: Dump-skeys hmp supportJason J. Herne1-0/+4
Add dump-skeys command to the human monitor. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03s390x: Dump storage keys qmp commandJason J. Herne1-0/+7
Provide a dump-skeys qmp command to allow the end user to dump storage keys. This is useful for debugging problems with guest storage key support within Qemu and for guest operating system developers. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-08-19osdep.h: Remove qemu_printfPeter Maydell1-2/+2
qemu_printf is an ancient remnant which has been a simple #define to printf for over a decade, and is used in only a few places. Expand it out in those places and remove the #define. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Finally unused, clean upMarkus Armbruster1-13/+0
Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-18/+6
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-33/+33
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster1-1/+1
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite1-1/+1
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Split mon_get_cpu fn to remove ENV_GET_CPUPeter Crosthwaite1-36/+29
The monitor currently has one helper, mon_get_cpu() which will return an env pointer. The target specific users of this API want an env, but all the target agnostic users really just want the cpu pointer. These users then need to use the target-specifically defined ENV_GET_CPU to navigate back up to the CPU from the ENV. Split the API for the two uses cases to remove all need for ENV_GET_CPU. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Fix failure path for "S" argumentBandan Das1-1/+1
Since the "S" argument type is only used with the "?" flag, the bug can't bite. Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Point to "help" command on syntax errorBandan Das1-0/+2
When a command fails due to incorrect syntax or input, suggest using the "help" command to get more information about the command. This is only applicable for HMP. Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: cleanup parsing of cmd name and cmd argumentsBandan Das1-40/+56
There's too much going on in monitor_parse_command(). Split up the arguments parsing bits into a separate function monitor_parse_arguments(). Let the original function check for command validity and sub-commands if any and return data (*cmd) that the newly introduced function can process and return a QDict. Also, pass a pointer to the cmdline to track current parser location. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: remove debug printsBandan Das1-19/+1
The preferred solution is to use tracepoints and there is good chance of bitrot with the debug prints not being enabled at compile time. Remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' inside qdictEric Blake1-1/+1
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake1-5/+5
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-15audio: remove LOG_TO_MONITOR along with default_monKővágó, Zoltán1-4/+0
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log to the monitor before it's being initialized), and also nothing else in qemu logs to the monitor. This log to monitor feature was the last thing that used the default_mon variable, so I removed it too (as using it can cause problems). Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman1-0/+28
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-08monitor: Fix QMP ABI breakage around "id"Markus Armbruster1-0/+2
Commit 65207c5 accidentally dropped a line of code we need along with a comment that became wrong then. This made QMP reject "id": {"execute": "system_reset", "id": "1"} {"error": {"class": "GenericError", "desc": "QMP input object member 'id' is unexpected"}} Put the lost line right back, so QMP again accepts and returns "id", as promised by the ABI: {"execute": "system_reset", "id": "1"} {"return": {}, "id": "1"} Reported-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1433753070-12632-2-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02monitor: Change return type of monitor_cur_is_qmp() to boolMarkus Armbruster1-2/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Rename monitor_ctrl_mode() to monitor_is_qmp()Markus Armbruster1-6/+8
... and change return type to bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Turn int command_mode into bool in_command_modeMarkus Armbruster1-11/+12
While there, inline the pointless qmp_cmd_mode() wrapper. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.1 at 2024-12-27 11:28:30 +0000