aboutsummaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2013-04-15Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-2/+2
* bonzini/hw-dirs: exec: remove useless declarations from memory-internal.h memory: move core typedefs to qemu/typedefs.h include: avoid useless includes of exec/ headers sysemu: avoid proliferation of include/ subdirectories tpm: reorganize headers and split hardware part configure: fix TPM logic acpi.h: make it self contained acpi: move declarations from pc.h to acpi.h hw: Add lost ARM core again Fix failure to create q35 machine Add linux-headers to QEMU_INCLUDES arm: fix location of some include files Conflicts: configure aliguori: trivial conflict in configure output Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15tpm: reorganize headers and split hardware partPaolo Bonzini1-1/+1
The TPM subsystem does not have a full front-end/back-end separation. The sole available backend, tpm_passthrough, depends on the data structures of the sole available frontend, tpm_tis. However, we can at least try to split the user interface (tpm.c) from the implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h, which is shared between tpm_tis.c and tpm_passthrough.c; instead it moves more stuff to tpm_backend.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-12Revert "New QMP command query-cpu-max and HMP command cpu_max"Michal Novotny1-7/+0
This reverts commit 4d700430a20b3d53b7b15bc5f6666f7e570e3f2c as asked by Luiz. The patch has been obsoleted by extending MachineInfo structure by cpu-max field. Signed-off-by: Michal Novotny <minovotn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-4/+4
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-05hmp: human-monitor-command: stop using the Memory chardev driverLuiz Capitulino1-9/+8
The Memory chardev driver was added because, as the Monitor's output buffer was static, we needed a way to accumulate the output of an HMP commmand when ran by human-monitor-command. However, the Monitor's output buffer is now dynamic, so it's possible for the human-monitor-command to use it instead of the Memory chardev driver. This commit does that change, but there are two important observations about it: 1. We need a way to signal to the Monitor that it shouldn't call chardev functions when flushing its output. This is done by adding a new flag to the Monitor object called skip_flush (which is set to true by qmp_human_monitor_command()) 2. The current code has buffered semantics: QMP clients will only see a command's output if it flushes its output with a new-line character. This commit changes this to unbuffered, which means that QMP clients will see a command's output whenever the command prints anything. I don't think this will matter in practice though, as I believe all HMP commands print the new-line character anyway. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-05Monitor: Make output buffer dynamicLuiz Capitulino1-17/+28
Commit f628926bb423fa8a7e0b114511400ea9df38b76a changed monitor_flush() to retry on qemu_chr_fe_write() errors. However, the Monitor's output buffer can keep growing while the retry is not issued and this can cause the buffer to overflow. To reproduce this issue, just start qemu and type on the Monitor: (qemu) ? This will cause an assertion to trig. To fix this problem this commit makes the Monitor buffer dynamic, which means that it can grow as much as needed. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-28trace: [monitor] Use new event control interfaceLluís Vilanova1-2/+11
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-26Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori1-0/+1
virtio,pci,qom Work by Alex to support VGA assignment, pci and virtio fixes by Stefan, Jason and myself, and a new qmp event for hotplug support by myself. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Alex Williamson (13) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: (23 commits) pcie: Add endpoint capability initialization wrapper roms: switch oldnoconfig to olddefconfig pcie: Mangle types to match topology pci: Create and use API to determine root buses pci: Create pci_bus_is_express helper pci: Q35, Root Ports, and Switches create PCI Express buses pci: Allow PCI bus creation interfaces to specify the type of bus pci: Move PCI and PCIE type defines pci: Create and register a new PCI Express TypeInfo exec: assert that RAMBlock size is non-zero pci: refuse empty ROM files pci_bridge: Remove duplicate IRQ swizzle function pci_bridge: Use a default map_irq function pci: Fix INTx routing notifier recursion pci_bridge: drop formatting from source pci_bridge: factor out common code pci: Teach PCI Bridges about VGA routing pci: Add PCI VGA helpers virtio-pci: guest notifier mask without non-irqfd virtio-net: remove layout assumptions for mq ctrl ...
2013-03-25New QMP command query-cpu-max and HMP command cpu_maxMichal Novotny1-0/+7
These commands return the maximum number of CPUs supported by the currently running emulator instance, as defined in its QEMUMachine struct. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-22Merge branch 'ppc-for-upstream' of git://github.com/agraf/qemuAurelien Jarno1-4/+0
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (58 commits) target-ppc: Use NARROW_MODE macro for tlbie target-ppc: Use NARROW_MODE macro for addresses target-ppc: Use NARROW_MODE macro for comparisons target-ppc: Use NARROW_MODE macro for branches target-ppc: Fix add and subf carry generation in narrow mode target-ppc: Use QOM method dispatch for MMU fault handling target-ppc: Move ppc tlb_fill implementation into mmu_helper.c target-ppc: Split user only code out of mmu_helper.c mmu-hash64: Implement Virtual Page Class Key Protection mmu-hash*: Merge translate and fault handling functions mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path for get_phys_page_debug() mmu-hash*: Correctly mask RPN from hash PTE mmu-hash*: Clean up real address calculation mmu-hash*: Clean up PTE flags update mmu-hash64: Factor SLB N bit into permissions bits mmu-hash*: Clean up permission checking mmu-hash32: Remove nx from context structure mmu-hash*: Don't update PTE flags when permission is denied mmu-hash32: Don't look up page tables on BAT permission error mmu-hash32: Cleanup BAT lookup ...
2013-03-22target-ppc: Remove vestigial PowerPC 620 supportDavid Gibson1-4/+0
The PowerPC 620 was the very first 64-bit PowerPC implementation, but hardly anyone ever actually used the chips. qemu notionally supports the 620, but since we don't actually have code to implement the segment table, the support is broken (quite likely in other ways too). This patch, therefore, removes all remaining pieces of 620 support, to stop it cluttering up the platforms we actually care about. This includes removing support for the ASR register, used only on segment table based machines. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22Fix typos and misspellingsPeter Maydell1-4/+4
Fix various typos and misspellings. The bulk of these were found with codespell. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-19fix monitorGerd Hoffmann1-2/+21
chardev flow control broke monitor, fix it by adding watch support. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-17qdev: DEVICE_DELETED eventMichael S. Tsirkin1-0/+1
libvirt has a long-standing bug: when removing the device, it can request removal but does not know when the removal completes. Add an event so we can fix this in a robust way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-14Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori1-8/+5
# By Andreas Färber (16) and Igor Mammedov (1) # Via Andreas Färber * afaerber/qom-cpu: target-lm32: Update VMStateDescription to LM32CPU target-arm: Override do_interrupt for ARMv7-M profile cpu: Replace do_interrupt() by CPUClass::do_interrupt method cpu: Pass CPUState to cpu_interrupt() exec: Pass CPUState to cpu_reset_interrupt() cpu: Move halted and interrupt_request fields to CPUState target-cris/helper.c: Update Coding Style target-i386: Update VMStateDescription to X86CPU cpu: Introduce cpu_class_set_vmsd() cpu: Register VMStateDescription through CPUState stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY vmstate: Make vmstate_register() static inline target-sh4: Move PVR/PRR/CVR into SuperHCPUClass target-sh4: Introduce SuperHCPU subclasses cpus: Replace open-coded CPU loop in qmp_memsave() with qemu_get_cpu() monitor: Use qemu_get_cpu() in monitor_set_cpu() cpu: Fix qemu_get_cpu() to return NULL if CPU not found
2013-03-12Support for TPM command line optionsStefan Berger1-0/+8
This patch adds support for TPM command line options. The command line options supported here are ./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id> -device tpm-tis,tpmdev=<id>,id=<other id> and ./qemu-... -tpmdev help where the latter works similar to -soundhw help and shows a list of available TPM backends (for example 'passthrough'). Using the type parameter, the backend is chosen, i.e., 'passthrough' for the passthrough driver. The interpretation of the other parameters along with determining whether enough parameters were provided is pushed into the backend driver, which needs to implement the interface function 'create' and return a TPMDriverOpts structure if the VM can be started or 'NULL' if not enough or bad parameters were provided. Monitor support for 'info tpm' has been added. It for example prints the following: (qemu) info tpm TPM devices: tpm0: model=tpm-tis \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12monitor: Use qemu_get_cpu() in monitor_set_cpu()Andreas Färber1-8/+5
No functional change, just a reduction of CPU loops. The mon_cpu field is left untouched for now since changing that requires a number of larger prerequisites, including cpu_synchronize_state() and mon_get_cpu(). Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini1-1/+1
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-23Replace all setjmp()/longjmp() with sigsetjmp()/siglongjmp()Peter Maydell1-3/+3
The setjmp() function doesn't specify whether signal masks are saved and restored; on Linux they are not, but on BSD (including MacOSX) they are. We want to have consistent behaviour across platforms, so we should always use "don't save/restore signal mask" (this is also generally going to be faster). This also works around a bug in MacOSX where the signal-restoration on longjmp() affects the signal mask for a completely different thread, not just the mask for the thread which did the longjmp. The most visible effect of this was that ctrl-C was ignored on MacOSX because the CPU thread did a longjmp which resulted in its signal mask being applied to every thread, so that all threads had SIGINT and SIGTERM blocked. The POSIX-sanctioned portable way to do a jump without affecting signal masks is to siglongjmp() to a sigjmp_buf which was created by calling sigsetjmp() with a zero savemask parameter, so change all uses of setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0) to save the signal mask; however the following siglongjmp() must not restore the signal mask, so the pair can be effectively considered as "sigjmp/longjmp which don't touch the mask".] For Windows we provide a trivial sigsetjmp/siglongjmp in terms of setjmp/longjmp -- this is OK because no user will ever pass a non-zero savemask. The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c are left untouched because these are self-contained singlethreaded test programs intended to be run under QEMU's Linux emulation, so they have neither the portability nor the multithreading issues to deal with. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename CPULogItem, cpu_log_items to QEMULogItem, qemu_log_itemsPeter Maydell1-2/+2
Rename the typedef CPULogItem and the public array cpu_log_items to names that better reflect the fact that the qemu_log functionality isn't restricted to TCG CPU debug logs any more. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename the public-facing cpu_set_log function to qemu_set_logPeter Maydell1-1/+1
Rename the public-facing function cpu_set_log to qemu_set_log. This requires us to rename the internal-only qemu_set_log() to do_qemu_set_log(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename cpu_str_to_log_mask to qemu_str_to_log_maskPeter Maydell1-1/+1
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since the qemu_log functionality is no longer restricted to TCG CPU debug logging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Unify {cpu_set,set_cpu}_log_filename as qemu_set_log_filenamePeter Maydell1-1/+1
The qemu_log() functionality is no longer specific to TCG CPU debug logs. Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the pointless wrapper set_cpu_log_filename(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-17HMP: add sub command table to infoWenchao Xia1-21/+1
Now info command takes a table of sub info commands, and changed do_info() to do_info_help() to do help funtion only. Note that now "info <unknown-topic>" returns error instead of list of info topics. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17HMP: move define of mon_cmdsWenchao Xia1-6/+6
Because mon_cmds may use info_cmds, so adjust the declare sequence of them. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17HMP: add infrastructure for sub commandWenchao Xia1-10/+39
This patch make parsing of hmp command aware of that it may have sub command. Also discard simple encapsulation function monitor_find_command(). For case "@command ", space after @command is filtered out. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17HMP: delete info handlerWenchao Xia1-46/+45
Now cmd and info handler have same format, so delete info handler. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17HMP: add QDict to info callback handlerWenchao Xia1-16/+16
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-15cpu: Move cpu_index field to CPUStateAndreas Färber1-5/+10
Note that target-alpha accesses this field from TCG, now using a negative offset. Therefore the field is placed last in CPUState. Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change. Move common parts of mips cpu_state_reset() to mips_cpu_reset(). Acked-by: Richard Henderson <rth@twiddle.net> (for alpha) [AF: Rebased onto ppc CPU subclasses and openpic changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-15cpu: Move numa_node field to CPUStateAndreas Färber1-1/+3
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-14Merge remote-tracking branch 'bonzini/stub' into stagingAnthony Liguori1-0/+22
* bonzini/stub: (27 commits) build: improve quiet output for .stp rules build: fold trace-obj-y into libqemuutil.a build: some simplifications for "trace/Makefile.objs" build: remove coroutine-obj-y build: move version-obj-y to the generic LINK rule build: move base QAPI files to libqemuutil.a build: move QAPI definitions for QEMU out of qapi-obj-y build: consolidate multiple variables into universal-obj-y build: move qobject files to qobject/ and libqemuutil.a build: move libqemuutil.a components to util/ build: move files away from tools-obj-y, common-obj-y, user-obj-y build: move util-obj-y to libqemuutil.a build: rename oslib-obj-y to util-obj-y libcacard: list oslib-obj-y file explicitly libcacard: link vscclient to dynamic library libcacard: rewrite Makefile in non-recursive style libcacard: add list of exported symbols libcacard: use per-target variable definitions libcacard: prepare to use -y trick in the Makefile libcacard: require libtool to build it ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-12qemu-option: move standard option definitions out of qemu-config.cPaolo Bonzini1-0/+22
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-10monitor: assert monitor_puts()'s loop invariantMarkus Armbruster1-0/+1
Chiefly to hush up Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-12-19softmmu: move remaining include files to include/ subdirectoriesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-4/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-4/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-8/+8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19ui: move files to ui/ and include/ui/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin1-1/+1
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-10-31target-i386: Pass X86CPU to cpu_x86_inject_mce()Andreas Färber1-2/+4
Needed for changing run_on_cpu() argument to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-24block: introduce BLOCK_JOB_READY eventPaolo Bonzini1-0/+1
Even for jobs that need to be manually completed, management may want to take care itself of the completion, not requiring the user to issue a command to terminate the job. In this case we want to avoid that they poll us continuously, waiting for completion to become available. Thus, add a new event that signals the phase switch and the availability of the block-job-complete command. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24monitor: Prevent removing fd from set during initCorey Bryant1-2/+3
If an fd is added to an fd set via the command line, and it is not referenced by another command line option (ie. -drive), then clean it up after QEMU initialization is complete. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24monitor: Enable adding an inherited fd to an fd setCorey Bryant1-72/+85
qmp_add_fd() gets an fd that was received over a socket with SCM_RIGHTS and adds it to an fd set. This patch adds support that will enable adding an fd that was inherited on the command line to an fd set. Note: All of the code added to monitor_fdset_add_fd(), with the exception of the error path for non-valid fdset-id, is code motion from qmp_add_fd(). Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24monitor: Allow add-fd to any specified fd setCorey Bryant1-17/+37
The first call to add an fd to an fd set was previously not allowed to choose the fd set ID. The ID was generated as the first available and ensuing calls could add more fds by specifying the fd set ID. This change allows users to choose the fd set ID on the first call. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-12-27 09:40:29 +0000