aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)AuthorFilesLines
2018-02-14migration: pass MigrationState to migrate_init()Peter Xu3-7/+7
Let the callers take the object, then pass it to migrate_init(). Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180208103132.28452-12-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14migration: allow send_rq to failPeter Xu2-8/+29
We will not allow failures to happen when sending data from destination to source via the return path. However it is possible that there can be errors along the way. This patch allows the migrate_send_rp_message() to return error when it happens, and further extended it to migrate_send_rp_req_pages(). Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180208103132.28452-9-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14migration: provide postcopy_fault_thread_notify()Peter Xu2-15/+22
A general helper to notify the fault thread. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180208103132.28452-4-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14migration: reuse mis->userfault_quit_fdPeter Xu2-11/+24
It was only used for quitting the page fault thread before. Let it be something more useful - now we can use it to notify a "wake" for the page fault thread (for any reason), and it only means "quit" if the fault_thread_quit is set. Since we changed what it does, renaming it to userfault_event_fd. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180208103132.28452-3-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14migration: better error handling with QEMUFilePeter Xu3-6/+60
If the postcopy down due to some reason, we can always see this on dst: qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000 However in most cases that's not the real issue. The problem is that qemu_get_be16() has no way to show whether the returned data is valid or not, and we are _always_ assuming it is valid. That's possibly not wise. The best approach to solve this would be: refactoring QEMUFile interface to allow the APIs to return error if there is. However it needs quite a bit of work and testing. For now, let's explicitly check the validity first before using the data in all places for qemu_get_*(). This patch tries to fix most of the cases I can see. Only if we are with this, can we make sure we are processing the valid data, and also can we make sure we can capture the channel down events correctly. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180208103132.28452-2-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14migration: Fix early failure cleanupDr. David Alan Gilbert1-5/+7
Avoid crash in cleanup after a very early migration failure (possibly due to my 688a3dcba980bf01344a 'Route errors down ...') Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180212160340.15333-2-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-02-14migration/xen: Check return value of qemu_fcloseRoss Lagerwall1-2/+1
QEMUFile uses buffered IO so when writing small amounts (such as the Xen device state file), the actual write call and any errors that may occur only happen as part of qemu_fclose(). Therefore, report IO errors when saving the device state under Xen by checking the return value of qemu_fclose(). Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Message-Id: <20180206163039.23661-1-ross.lagerwall@citrix.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09qdict qlist: Make most helper macros functionsMarkus Armbruster1-0/+1
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h and qnum.h in the headers, but not qbool.h and qstring.h. Works, because we include those wherever the macros get used. Open-coding these helpers is of dubious value. Turn them into functions and drop the includes from the headers. This cleanup makes the number of objects depending on qapi/qmp/qnum.h from 4551 (out of 4743) to 46 in my "build everything" tree. For qapi/qmp/qnull.h, the number drops from 4552 to 21. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-10-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster7-2/+6
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster1-1/+0
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-02-06migration: incoming postcopy advise sanity checksGreg Kurz1-3/+18
If postcopy-ram was set on the source but not on the destination, migration doesn't occur, the destination prints an error and boots the guest: qemu-system-ppc64: Expected vmdescription section, but got 0 We end up with two running instances. This behaviour was introduced in 2.11 by commit 58110f0acb1a "migration: split common postcopy out of ram postcopy" to prepare ground for the upcoming dirty bitmap postcopy support. It adds a new case where the source may send an empty postcopy advise because dirty bitmap doesn't need to check page sizes like RAM postcopy does. If the source has enabled postcopy-ram, then it sends an advise with the page size values. If the destination hasn't enabled postcopy-ram, then loadvm_postcopy_handle_advise() leaves the page size values on the stream and returns. This confuses qemu_loadvm_state() later on and causes the destination to start execution. As discussed several times, postcopy-ram should be enabled both sides to be functional. This patch changes the destination to perform some extra checks on the advise length to ensure this is the case. Otherwise an error is returned and migration is aborted. Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <151791621042.19120.3103118434734245776.stgit@bahia> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration: Don't leak IO channelsRoss Lagerwall1-0/+2
Since qemu_fopen_channel_{in,out}put take references on the underlying IO channels, make sure to release our references to them. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Message-Id: <20171101142526.1006-2-ross.lagerwall@citrix.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration: Recover block devices if failure in device stateDr. David Alan Gilbert1-1/+2
In e91d895 I added the new pause-before-switchover mechanism to allow migration completion to be delayed; this changes the last state prior to completion to MIGRATE_STATUS_DEVICE rather than MIGRATE_STATUS_ACTIVE. Fix the failure path in migration_completion to recover the block devices if it fails in MIGRATE_STATUS_DEVICE, not just the MIGRATE_STATUS_ACTIVE that it previously had. This corresponds to rh bz: https://bugzilla.redhat.com/show_bug.cgi?id=1538494 whose symptom is an occasional source crash on a failed migration. Fixes: e91d8951d59d483f085f Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration: Drop current address parameter from save_zero_page()Juan Quintela1-6/+5
It already has RAMBlock and offset, it can calculate it itself. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration: use s->threshold_size inside migration_update_countersWei Wang1-3/+2
Fixes: b15df1ae50 ("migration: cleanup stats update into function") The threshold size is changed to be recorded in s->threshold_size. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration/savevm.c: set MAX_VM_CMD_PACKAGED_SIZE to 1ul << 32Daniel Henrique Barboza1-1/+1
MAX_VM_CMD_PACKAGED_SIZE is a constant used in qemu_savevm_send_packaged and loadvm_handle_cmd_packaged to determine whether a package is too big to be sent or received. qemu_savevm_send_packaged is called inside postcopy_start (migration/migration.c) to send the MigrationState in a single blob to the destination, using the MIG_CMD_PACKAGED subcommand, which will read it up using loadvm_handle_cmd_packaged. If the blob is larger than MAX_VM_CMD_PACKAGED_SIZE, an error is thrown and the postcopy migration is aborted. Both MAX_VM_CMD_PACKAGED_SIZE and MIG_CMD_PACKAGED were introduced by commit 11cf1d984b ("MIG_CMD_PACKAGED: Send a packaged chunk ..."). The constant has its original value of 1ul << 24 (16MB). The current MAX_VM_CMD_PACKAGED_SIZE value is not enough to support postcopy migration of bigger pseries guests. The blob size for a postcopy migration of a pseries guest with the following setup: qemu-system-ppc64 --nographic -vga none -machine pseries,accel=kvm -m 64G \ -smp 1,maxcpus=32 -device virtio-blk-pci,drive=rootdisk \ -drive file=f27.qcow2,if=none,cache=none,format=qcow2,id=rootdisk \ -netdev user,id=u1 -net nic,netdev=u1 Goes around 12MB. Bumping the RAM to 128G makes the blob sizes goes to 20MB. With 256G the blob goes to 37MB - more than twice the current maximum size. At this moment the pseries machine can handle guests with up to 1TB of RAM, making this postcopy blob goes to 128MB of size approximately. Following the discussions made in [1], there is a need to understand what devices are aggressively consuming the blob in that manner and see if that can be mitigated. Until then, we can set MAX_VM_CMD_PACKAGED_SIZE to the maximum value allowed. Since the size is a 32 bit int variable, we can set it as 1ul << 32, giving a maximum blob size of 4G that is enough to support postcopy migration of 32TB RAM guests given the above constraints. [1] https://lists.nongnu.org/archive/html/qemu-devel/2018-01/msg06313.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration: Route errors down through migration_channel_connectDr. David Alan Gilbert7-25/+23
Route async errors (especially from sockets) down through migration_channel_connect and on to migrate_fd_connect where they can be cleaned up. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06migration: Allow migrate_fd_connect to take an Error *Dr. David Alan Gilbert4-4/+9
Allow whatever is performing the connection to pass migrate_fd_connect an error to indicate there was a problem during connection, an allow us to clean up. The caller must free the error. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-23Merge remote-tracking branch 'remotes/huth/tags/pull-request-2018-01-22' ↵Peter Maydell1-2/+2
into staging Pull request for various patches that have been reviewed and laying on the mailing list for a while, but apparently no maintainer feels really responsible for picking up. # gpg: Signature made Mon 22 Jan 2018 11:10:16 GMT # gpg: using RSA key 0x2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" # gpg: aka "Thomas Huth <thuth@redhat.com>" # gpg: aka "Thomas Huth <huth@tuxfamily.org>" # gpg: aka "Thomas Huth <th.huth@posteo.de>" # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth/tags/pull-request-2018-01-22: hw/isa: Replace fprintf(stderr, "*\n" with error_report() hw/ipmi: Replace fprintf(stderr, "*\n" with error_report() hw/bt: Replace fprintf(stderr, "*\n" with error_report() Fixes after renaming __FUNCTION__ to __func__ Replace all occurances of __FUNCTION__ with __func__ tests/cpu-plug-test: Test CPU hot-plugging on s390x tests/cpu-plug-test: Check CPU hot-plugging on ppc64, too tests/cpu-plug-test: Check the CPU hot-plugging with device_add, too tests: Rename pc-cpu-test.c to cpu-plug-test.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-23migration: Revert postcopy-blocktime commit setPeter Maydell4-322/+6
This reverts commits ca6011c migration: add postcopy total blocktime into query-migrate 5f32dc8 migration: add blocktime calculation into migration-test 2f7dae9 migration: postcopy_blocktime documentation 3be98be migration: calculate vCPU blocktime on dst side 01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState 31bf06a migration: introduce postcopy-blocktime capability as they don't build on ppc32 due to trying to do atomic accesses on types that are larger than the host pointer type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis1-2/+2
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* QemuMutex tracing improvements (Alex) * ram_addr_t optimization (David) * SCSI fixes (Fam, Stefan, me) * do {} while (0) fixes (Eric) * KVM fix for PMU (Jan) * memory leak fixes from ASAN (Marc-André) * migration fix for HPET, icount, loadvm (Maria, Pavel) * hflags fixes (me, Tao) * block/iscsi uninitialized variable (Peter L.) * full support for GMainContexts in character devices (Peter Xu) * more boot-serial-test (Thomas) * Memory leak fix (Zhecheng) # gpg: Signature made Tue 16 Jan 2018 14:15:45 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (51 commits) scripts/analyse-locks-simpletrace.py: script to analyse lock times util/qemu-thread-*: add qemu_lock, locked and unlock trace events cpu: flush TB cache when loading VMState block/iscsi: fix initialization of iTask in iscsi_co_get_block_status find_ram_offset: Align ram_addr_t allocation on long boundaries find_ram_offset: Add comments and tracing cpu_physical_memory_sync_dirty_bitmap: Another alignment fix checkpatch: Enforce proper do/while (0) style maint: Fix macros with broken 'do/while(0); ' usage tests: Avoid 'do/while(false); ' in vhost-user-bridge chardev: Clean up previous patch indentation chardev: Use goto/label instead of do/break/while(0) mips: Tweak location of ';' in macros net: Drop unusual use of do { } while (0); irq: fix memory leak cpus: unify qemu_*_wait_io_event icount: fixed saving/restoring of icount warp timers scripts/qemu-gdb/timers.py: new helper to dump timer state scripts/qemu-gdb: add simple tcg lock status helper target-i386: update hflags on Hypervisor.framework ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16maint: Fix macros with broken 'do/while(0); ' usageEric Blake1-1/+1
The point of writing a macro embedded in a 'do { ... } while (0)' loop (particularly if the macro has multiple statements or would otherwise end with an 'if' statement) is so that the macro can be used as a drop-in statement with the caller supplying the trailing ';'. Although our coding style frowns on brace-less 'if': if (cond) statement; else something else; that is the classic case where failure to use do/while(0) wrapping would cause the 'else' to pair with any embedded 'if' in the macro rather than the intended outer 'if'. But conversely, if the macro includes an embedded ';', then the same brace-less coding style would now have two statements, making the 'else' a syntax error rather than pairing with the outer 'if'. Thus, even though our coding style with required braces is not impacted, ending a macro with ';' makes our code harder to port to projects that use brace-less styles. The change should have no semantic impact. I was not able to fully compile-test all of the changes (as some of them are examples of the ugly bit-rotting debug print statements that are completely elided by default, and I didn't want to recompile with the necessary -D witnesses - cleaning those up is left as a bite-sized task for another day); I did, however, audit that for all files touched, all callers of the changed macros DID supply a trailing ';' at the callsite, and did not appear to be used as part of a brace-less conditional. Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\ Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20171201232433.25193-7-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-15migration: remove notify in fd_errorPeter Xu1-1/+0
It is already called in migrate_fd_cleanup. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: remove some block_cleanup_parameters()Peter Xu1-2/+0
Keep the one in migrate_fd_cleanup() would be enough. Removing the other two. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: put the finish part into a new functionPeter Xu1-45/+49
This patch only moved the last part of migration_thread() into a new function migration_iteration_finish() to make it much shorter. With previous works to remove some local variables, now it's fairly easy to do that. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: major cleanup for migrate iterationsPeter Xu1-35/+55
The major work for migration iterations are to move RAM/block/... data via qemu_savevm_state_iterate(). Generalize those part into a single function. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: cleanup stats update into functionPeter Xu2-36/+61
We have quite a few lines in migration_thread() that calculates some statistics for the migration interations. Isolate it into a single function to improve readability. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: use switch at the end of migrationPeter Xu1-17/+27
It converts the old if clauses into switch, explicitly mentions the possible migration states. The old nested "if"s are not clear on what we do on different states. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: introduce migrate_calculate_completePeter Xu1-11/+20
Generalize the calculation part when migration complete into a function to simplify migration_thread(). Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: introduce downtime_startPeter Xu2-8/+6
Introduce MigrationState.downtime_start to replace the local variable "start_time" in migration_thread to avoid passing things around. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: move vm_old_running into global statePeter Xu2-10/+13
Firstly, it was passed around. Let's just move it into MigrationState just like many other variables as state of migration, renaming it to vm_was_running. One thing to mention is that for postcopy, we actually don't need this knowledge at all since postcopy can't resume a VM even if it fails (we can see that from the old code too: when we try to resume we also check against "entered_postcopy" variable). So further we do this: - in postcopy_start(), we don't update vm_old_running since useless - in migration_thread(), we don't need to check entered_postcopy when resume, since it's only used for precopy. Comment this out too for that variable definition. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: split use of MigrationState.total_timePeter Xu2-3/+7
It was used either to: 1. store initial timestamp of migration start, and 2. store total time used by last migration Let's provide two parameters for each of them. Mix use of the two is slightly misleading. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: remove "enable_colo" varPeter Xu1-2/+1
It's only used once, clean it up a bit. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: qemu_savevm_state_cleanup() in cleanupPeter Xu1-8/+2
Moving existing callers all into migrate_fd_cleanup(). It simplifies migration_thread() a bit. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: assert colo instead of checkPeter Xu1-1/+9
When reaching here if we are still "active" it means we must be in colo state. After a quick discussion offlist, we decided to use the safer error_report(). Finally I want to use "switch" here rather than lots of complicated if clauses. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: finalize current_migration objectVladimir Sementsov-Ogievskiy1-0/+5
current_migration has .instance_finalize callback, but it is not called, because nobody unrefs current_migration. Fix that. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: Guard ram_bytes_remaining against early callDr. David Alan Gilbert1-1/+2
Calling ram_bytes_remaining during the early part of setup is unsafe because the ram_state isn't yet initialised. This can happen in the sequence: migrate migrate_cancel info migrate if the migrate sticks trying to connect (e.g. to an unresponsive destination due to the connect timeout). Here 'info migrate' sees a state of CANCELLING and so assumes the migrate has partially happened. partial fix for: RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1525899 Reported-by: Xianxian Wang <xianwang@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: add postcopy total blocktime into query-migrateAlexey Perevalov4-4/+99
Postcopy total blocktime is available on destination side only. But query-migrate was possible only for source. This patch adds ability to call query-migrate on destination. To be able to see postcopy blocktime, need to request postcopy-blocktime capability. The query-migrate command will show following sample result: {"return": "postcopy-vcpu-blocktime": [115, 100], "status": "completed", "postcopy-blocktime": 100 }} postcopy_vcpu_blocktime contains list, where the first item is the first vCPU in QEMU. This patch has a drawback, it combines states of incoming and outgoing migration. Ongoing migration state will overwrite incoming state. Looks like better to separate query-migrate for incoming and outgoing migration or add parameter to indicate type of migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: calculate vCPU blocktime on dst sideAlexey Perevalov2-2/+146
This patch provides blocktime calculation per vCPU, as a summary and as a overlapped value for all vCPUs. This approach was suggested by Peter Xu, as an improvements of previous approch where QEMU kept tree with faulted page address and cpus bitmask in it. Now QEMU is keeping array with faulted page address as value and vCPU as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps list for blocktime per vCPU (could be traced with page_fault_addr) Blocktime will not calculated if postcopy_blocktime field of MigrationIncomingState wasn't initialized. Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: add postcopy blocktime ctx into MigrationIncomingStateAlexey Perevalov2-0/+67
This patch adds request to kernel space for UFFD_FEATURE_THREAD_ID, in case this feature is provided by kernel. PostcopyBlocktimeContext is encapsulated inside postcopy-ram.c, due to it being a postcopy-only feature. Also it defines PostcopyBlocktimeContext's instance live time. Information from PostcopyBlocktimeContext instance will be provided much after postcopy migration end, instance of PostcopyBlocktimeContext will live till QEMU exit, but part of it (vcpu_addr, page_fault_vcpu_time) used only during calculation, will be released when postcopy ended or failed. To enable postcopy blocktime calculation on destination, need to request proper compatibility (Patch for documentation will be at the tail of the patch set). As an example following command enable that capability, assume QEMU was started with -chardev socket,id=charmonitor,path=/var/lib/migrate-vm-monitor.sock option to control it [root@host]#printf "{\"execute\" : \"qmp_capabilities\"}\r\n \ {\"execute\": \"migrate-set-capabilities\" , \"arguments\": { \"capabilities\": [ { \"capability\": \"postcopy-blocktime\", \"state\": true } ] } }" | nc -U /var/lib/migrate-vm-monitor.sock Or just with HMP (qemu) migrate_set_capability postcopy-blocktime on Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: introduce postcopy-blocktime capabilityAlexey Perevalov2-0/+10
Right now it could be used on destination side to enable vCPU blocktime calculation for postcopy live migration. vCPU blocktime - it's time since vCPU thread was put into interruptible sleep, till memory page was copied and thread awake. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: free addr in the same function that we created itJuan Quintela1-2/+2
Otherwise, we can't use it after calling socket_start_incoming_migration Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-01-15migration: print features as on offJuan Quintela1-4/+9
Once there, do one thing for line Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-01-15migration: Use proper types in jsonJuan Quintela1-29/+20
We use int for everything (int64_t), and then we check that value is between 0 and 255. Change it to the valid types. This change only happens for HMP. QMP always use bytes and similar. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-12-18Remove empty statementsLadi Prosek1-1/+1
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c I have trivially grepped the tree for ';;' in C files. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-11-22migration/ram.c: do not set 'postcopy_running' in POSTCOPY_INCOMING_ENDDaniel Henrique Barboza1-2/+14
When migrating a VM with 'migrate_set_capability postcopy-ram on' a postcopy_state is set during the process, ending up with the state POSTCOPY_INCOMING_END when the migration is over. This postcopy_state is taken into account inside ram_load to check how it will load the memory pages. This same ram_load is called when in a loadvm command. Inside ram_load, the logic to see if we're at postcopy_running state is: postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING postcopy_state_get() returns this enum type: typedef enum { POSTCOPY_INCOMING_NONE = 0, POSTCOPY_INCOMING_ADVISE, POSTCOPY_INCOMING_DISCARD, POSTCOPY_INCOMING_LISTENING, POSTCOPY_INCOMING_RUNNING, POSTCOPY_INCOMING_END } PostcopyState; In the case where ram_load is executed and postcopy_state is POSTCOPY_INCOMING_END, postcopy_running will be set to 'true' and ram_load will behave like a postcopy is in progress. This scenario isn't achievable in a migration but it is reproducible when executing savevm/loadvm after migrating with 'postcopy-ram on', causing loadvm to fail with Error -22: Source: (qemu) migrate_set_capability postcopy-ram on (qemu) migrate tcp:127.0.0.1:4444 Dest: (qemu) migrate_set_capability postcopy-ram on (qemu) ubuntu1704-intel login: Ubuntu 17.04 ubuntu1704-intel ttyS0 ubuntu1704-intel login: (qemu) (qemu) savevm test1 (qemu) loadvm test1 Unknown combination of migration flags: 0x4 (postcopy mode) error while loading state for instance 0x0 of device 'ram' Error -22 while loading VM state (qemu) This patch fixes this problem by changing the existing logic for postcopy_advised and postcopy_running in ram_load, making them 'false' if we're at POSTCOPY_INCOMING_END state. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> CC: Juan Quintela <quintela@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-11-21migration, xen: Fix block image lock issue on live migrationAnthony PERARD1-1/+22
When doing a live migration of a Xen guest with libxl, the images for block devices are locked by the original QEMU process, and this prevent the QEMU at the destination to take the lock and the migration fail. >From QEMU point of view, once the RAM of a domain is migrated, there is two QMP commands, "stop" then "xen-save-devices-state", at which point a new QEMU is spawned at the destination. Release locks in "xen-save-devices-state" so the destination can takes them, if it's a live migration. This patch add the "live" parameter to "xen-save-devices-state" which default to true so older version of libxenlight can work with newer version of QEMU. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-11-21block: Add errp to bdrv_all_goto_snapshot()Kevin Wolf1-3/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
generated by cgit v1.1 at 2024-12-26 22:01:54 +0000