aboutsummaryrefslogtreecommitdiff
path: root/migration/block.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-02migration: Define BLK_MIG_BLOCK_SIZE as unsigned long longPeter Maydell1-1/+1
When we use BLK_MIG_BLOCK_SIZE in expressions like block_mig_state.submitted * BLK_MIG_BLOCK_SIZE, this multiplication is done as 32 bits, because both operands are 32 bits. Coverity complains about possible overflows because we then accumulate that into a 64 bit variable. Define BLK_MIG_BLOCK_SIZE as unsigned long long using the ULL suffix. The only two current uses of it with this problem are both in block_save_pending(), so we could just cast to uint64_t there, but using the ULL suffix is simpler and ensures that we don't accidentally introduce new variants of the same issue in future. Resolves: Coverity CID 1487136, 1487175 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220721115207.729615-3-peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-12block: Change blk_{pread,pwrite}() param orderAlberto Faria1-3/+3
Swap 'buf' and 'bytes' around for consistency with blk_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes, flags; @@ - blk_pread(blk, offset, buf, bytes, flags) + blk_pread(blk, offset, bytes, buf, flags) @@ expression blk, offset, buf, bytes, flags; @@ - blk_pwrite(blk, offset, buf, bytes, flags) + blk_pwrite(blk, offset, bytes, buf, flags) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-4-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add a 'flags' param to blk_pread()Alberto Faria1-2/+2
For consistency with other I/O functions, and in preparation to implement it using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes; @@ - blk_pread(blk, offset, buf, bytes) + blk_pread(blk, offset, buf, bytes, 0) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-3-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-06-22migration: rename qemu_ftell to qemu_file_total_transferredDaniel P. Berrangé1-5/+5
The name 'ftell' gives the misleading impression that the QEMUFile objects are seekable. This is not the case, as in general we just have an opaque stream. The users of this method are only interested in the total bytes processed. This switches to a new name that reflects the intended usage. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Wrapped long line
2022-03-04block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and ↵Emanuele Giuseppe Esposito1-1/+1
test_sync_op_invalidate_cache Following the bdrv_activate renaming, change also the name of the respective callers. bdrv_invalidate_cache_all -> bdrv_activate_all blk_invalidate_cache -> blk_activate test_sync_op_invalidate_cache -> test_sync_op_activate No functional change intended. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220209105452.1694545-5-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-26migration: using trace_ to replace DPRINTFBihong Yu1-18/+18
Signed-off-by: Bihong Yu <yubihong@huawei.com> Message-Id: <1603179176-5360-1-git-send-email-yubihong@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Don't use '#' flag of printf formatBihong Yu1-1/+1
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1603163448-27122-3-git-send-email-yubihong@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-10-26migration: Do not use C99 // commentsBihong Yu1-1/+1
Signed-off-by: Bihong Yu <yubihong@huawei.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1603163448-27122-2-git-send-email-yubihong@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28migration/block: rename BLOCK_SIZE macroStefan Hajnoczi1-19/+20
Both <linux/fs.h> and <sys/mount.h> define BLOCK_SIZE macros. Avoiding using that name in block/migration.c. I noticed this when including <liburing.h> (Linux io_uring) from "block/aio.h" and compilation failed. Although patches adding that include haven't been sent yet, it makes sense to rename the macro now in case someone else stumbles on it in the meantime. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-10-17block/dirty-bitmap: add bs linkVladimir Sementsov-Ogievskiy1-2/+2
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState parameter from bitmap APIs where possible. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com [Rebased on top of block-copy. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2019-09-16block: Remove unused masksNir Soffer1-1/+1
Replace confusing usage: ~BDRV_SECTOR_MASK With more clear: (BDRV_SECTOR_SIZE - 1) Remove BDRV_SECTOR_MASK and the unused BDRV_BLOCK_OFFSET_MASK which was it's last user. Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-id: 20190827185913.27427-3-nsoffer@redhat.com Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-12migration: register_savevm_live doesn't need devDr. David Alan Gilbert1-1/+1
Commit 78dd48df3 removed the last caller of register_savevm_live for an instantiable device (rather than a single system wide device); so trim out the parameter. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190822115433.12070-1-dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-08-16block/dirty-bitmap: add bdrv_dirty_bitmap_getJohn Snow1-3/+2
Add a public interface for get. While we're at it, rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked". (There are more functions to rename to the bdrv_dirty_bitmap_VERB form, but they will wait until the conclusion of this series.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20190709232550.10724-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-04block: Add BlockBackend.ctxKevin Wolf1-1/+2
This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-22migration/block: use qemu_iovec_init_bufVladimir Sementsov-Ogievskiy1-7/+3
Use new qemu_iovec_init_buf() instead of qemu_iovec_init_external( ... , 1), which simplifies the code. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190218140926.333779-14-vsementsov@virtuozzo.com Message-Id: <20190218140926.333779-14-vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini1-2/+2
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-23migration/block: compare only read blocks against the rate limiterPeter Lieven1-2/+1
only read_done blocks are in the queued to be flushed to the migration stream. submitted blocks are still in flight. Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1520507908-16743-6-git-send-email-pl@kamp.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-23migration/block: limit the number of parallel I/O requestsPeter Lieven1-0/+2
the current implementation submits up to 512 I/O requests in parallel which is much to high especially for a background task. This patch adds a maximum limit of 16 I/O requests that can be submitted in parallel to avoid monopolizing the I/O device. Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1520507908-16743-5-git-send-email-pl@kamp.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-13migration: introduce postcopy-only pendingVladimir Sementsov-Ogievskiy1-3/+4
There would be savevm states (dirty-bitmap) which can migrate only in postcopy stage. The corresponding pending is introduced here. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
2018-03-09migration/block: rename MAX_INFLIGHT_IO to MAX_IO_BUFFERSPeter Lieven1-4/+3
this actually limits (as the original commit mesage suggests) the number of I/O buffers that can be allocated and not the number of parallel (inflight) I/O requests. Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1520507908-16743-4-git-send-email-pl@kamp.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-09migration/block: reset dirty bitmap before read in bulk phasePeter Lieven1-3/+2
Reset the dirty bitmap before reading to make sure we don't miss any new data. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1520507908-16743-3-git-send-email-pl@kamp.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis1-2/+2
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-12-18Remove empty statementsLadi Prosek1-1/+1
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c I have trivially grepped the tree for ';;' in C files. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-11-17block: Make bdrv_next() keep strong referencesMax Reitz1-0/+1
On one hand, it is a good idea for bdrv_next() to return a strong reference because ideally nearly every pointer should be refcounted. This fixes intermittent failure of iotest 194. On the other, it is absolutely necessary for bdrv_next() itself to keep a strong reference to both the BB (in its first phase) and the BDS (at least in the second phase) because when called the next time, it will dereference those objects to get a link to the next one. Therefore, it needs these objects to stay around until then. Just storing the pointer to the next in the iterator is not really viable because that pointer might become invalid as well. Both arguments taken together means we should probably just invoke bdrv_ref() and blk_ref() in bdrv_next(). This means we have to assert that bdrv_next() is always called from the main loop, but that was probably necessary already before this patch and judging from the callers, it also looks to actually be the case. Keeping these strong references means however that callers need to give them up if they decide to abort the iteration early. They can do so through the new bdrv_next_cleanup() function. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20171110172545.32609-1-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-10-06dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytesEric Blake1-2/+5
Some of the callers were already scaling bytes to sectors; others can be easily converted to pass byte offsets, all in our shift towards a consistent byte interface everywhere. Making the change will also make it easier to write the hold-out callers to use byte rather than sectors for their iterations; it also makes it easier for a future dirty-bitmap patch to offload scaling over to the internal hbitmap. Although all callers happen to pass sector-aligned values, make the internal scaling robust to any sub-sector requests. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-06dirty-bitmap: Change bdrv_get_dirty_locked() to take bytesEric Blake1-1/+2
Half the callers were already scaling bytes to sectors; the other half can eventually be simplified to use byte iteration. Both callers were already using the result as a bool, so make that explicit. Making the change also makes it easier for a future dirty-bitmap patch to offload scaling over to the internal hbitmap. Remember, asking whether a byte is dirty is effectively asking whether the entire granularity containing the byte is dirty, since we only track dirtiness by granularity. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-06dirty-bitmap: Change bdrv_get_dirty_count() to report bytesEric Blake1-1/+1
Thanks to recent cleanups, all callers were scaling a return value of sectors into bytes; do the scaling internally instead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-27migration: disable auto-converge during bulk block migrationPeter Lieven1-0/+5
auto-converge and block migration currently do not play well together. During block migration the auto-converge logic detects that ram migration makes no progress and thus throttles down the vm until it nearly stalls completely. Avoid this by disabling the throttling logic during the bulk phase of the block migration. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename cleanup() to save_cleanup()Juan Quintela1-1/+1
We need a cleanup for loads, so we rename here to be consistent. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Rename htab_cleanup to htap_save_cleanup as dave suggestion Message-Id: <20170628095228.4661-3-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename save_live_setup() to save_setup()Juan Quintela1-1/+1
We are going to use it now for more than save live regions. Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170628095228.4661-2-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10block: Make bdrv_is_allocated() byte-basedEric Blake1-6/+10
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-16block: protect modification of dirty bitmaps with a mutexPaolo Bonzini1-4/+6
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170605123908.18777-17-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16migration/block: reset dirty bitmap before readingPaolo Bonzini1-1/+2
Any data that is returned by read may be stale already, the bitmap has to be cleared before issuing the read. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170605123908.18777-16-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16block: introduce dirty_bitmap_mutexPaolo Bonzini1-6/+0
It protects only the list of dirty bitmaps; in the next patch we will also protect their content. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170605123908.18777-15-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-14migration: Remove unneeded includesJuan Quintela1-6/+0
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: Move migration.h to migration/Juan Quintela1-1/+1
Nothing uses it outside of migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Split registration functions from vmstate.hJuan Quintela1-0/+1
They are indpendent, and nowadays almost every device register things with qdev->vmsd. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-09migration/block: Clean up BBs in block_save_complete()Kevin Wolf1-5/+17
We need to release any block migrations BlockBackends on the source before successfully completing the migration because otherwise inactivating the images will fail (inactivation only tolerates device BBs). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2017-06-01migration: Move include/migration/block.h into migration/Juan Quintela1-1/+2
All functions were internal, except blk_mig_init() that is exported in misc.h now. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-01migration: Split qemu-file.hJuan Quintela1-1/+1
Split the file into public and internal interfaces. I have to rename the external one because we can't have two include files with the same name in the same directory. Build system gets confused. The only exported functions are the ones that handle basic types. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-18migration: Remove vmstate.h from migration.hJuan Quintela1-0/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- Minor rearrangements due to rebase
2017-05-18migration: Remove qemu-file.h from vmstate.hJuan Quintela1-0/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- minor rearangements due to the rebase
2017-05-18migration: Remove use of old MigrationParamsJuan Quintela1-15/+2
We have change in the previous patch to use migration capabilities for it. Notice that we continue using the old command line flags from migrate command from the time being. Remove the set_params method as now it is empty. For savevm, one can't do a: savevm -b/-i foo but now one can do: migrate_set_capability block on savevm foo And we can't use block migration. We could disable block capability unconditionally, but it would not be much better. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> --- - Maintain shared/enabled dependency (Xu suggestion) - Now we maintain the dependency on the setter functions - improve error messages
2017-04-21migration/block: use blk_pwrite_zeroes for each zero clusterLidong Chen1-2/+33
BLOCK_SIZE is (1 << 20), qcow2 cluster size is 65536 by default, this may cause the qcow2 file size to be bigger after migration. This patch checks each cluster, using blk_pwrite_zeroes for each zero cluster. [Initialize cluster_size to BLOCK_SIZE to prevent a gcc uninitialized variable compiler warning. In reality we always initialize cluster_size in a conditional but gcc doesn't know that. --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Lidong Chen <lidongchen@tencent.com> Message-id: 1492050868-16200-1-git-send-email-lidongchen@tencent.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-16migration/block: Avoid invoking blk_drain too frequentlyLidong Chen1-0/+3
Increase bmds->cur_dirty after submit io, so reduce the frequency involve into blk_drain, and improve the performance obviously when block migration. The performance test result of this patch: During the block dirty save phase, this patch improve guest os IOPS from 4.0K to 9.5K. and improve the migration speed from 505856 rsec/s to 855756 rsec/s. Signed-off-by: Lidong Chen <jemmy858585@gmail.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-13migration: Document handling of bdrv_is_allocated() errorsEric Blake1-0/+2
Migration is the only code left in the tree that does not react to bdrv_is_allocated() failures. But as there is no useful way to react to the failure, and we are merely skipping unallocated sectors on success, just document that our choice of handling is intended. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28migration/block: Use real permissionsKevin Wolf1-5/+17
Request BLK_PERM_CONSISTENT_READ for the source of block migration, and handle potential permission errors as good as we can in this place (which is not very good, but it matches the other failure cases). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add error parameter to blk_insert_bs()Kevin Wolf1-1/+1
Now that blk_insert_bs() requests the BlockBackend permissions for the node it attaches to, it can fail. Instead of aborting, pass the errors to the callers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28block: Add permissions to blk_new()Kevin Wolf1-1/+2
We want every user to be specific about the permissions it needs, so we'll pass the initial permissions as parameters to blk_new(). A user only needs to call blk_set_perm() if it wants to change the permissions after the fact. The permissions are stored in the BlockBackend and applied whenever a BlockDriverState should be attached in blk_insert_bs(). This does not include actually choosing the right set of permissions everywhere yet. Instead, the usual FIXME comment is added to each place and will be addressed in individual patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
generated by cgit v1.1 at 2024-12-23 15:17:01 +0000