aboutsummaryrefslogtreecommitdiff
path: root/migration.c
AgeCommit message (Collapse)AuthorFilesLines
2011-07-23notifier: Pass data argument to callbackJan Kiszka1-6/+6
This allows to pass additional information to the notifier callback which is useful if sender and receiver do not share any other distinct data structure. Will be used first for the clock reset notifier. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-14Improve vm_stop reason declarationsJan Kiszka1-1/+1
Define and use dedicated constants for vm_stop reasons, they actually have nothing to do with the EXCP_* defines used so far. At this chance, specify more detailed reasons so that VM state change handlers can evaluate them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-24add migration state change notifiersGerd Hoffmann1-0/+28
This patch adds functions to register and unregister notifiers for migration state changes and a function to query the migration state. The notifier is called on every state change. Once after establishing a new migration object (which is in active state then) and once when the state changes from active to completed, canceled or error. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-17savevm: Fix no_migrateAlex Williamson1-0/+4
The no_migrate save state flag is currently only checked in the last phase of migration. This means that we potentially waste a lot of time and bandwidth with the live state handlers before we ever check the no_migrate flags. The error message printed when we catch a non-migratable device doesn't get printed for a detached migration. And, no_migrate does nothing to prevent an incoming migration to a target that includes a non-migratable device. This attempts to fix all of these. One notable difference in behavior is that an outgoing migration now checks for non-migratable devices before ever connecting to the target system. This means the target will remain listening rather than exit from failure. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09migration/savevm: no need to flush requestsMichael S. Tsirkin1-2/+0
There's no need to flush requests after vmstop as vmstop does it for us automatically now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-02migration: allow rate > 4gMichael S. Tsirkin1-2/+4
I'd like to disable bandwidth limit or make it very high, Use int64_t all over to make values >= 4g work. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2010-11-03Switch migrate_set_speed() to take an 'o' argument rather than a float.Jes Sorensen1-2/+2
Clarify default value of MB in migration speed argument in monitor, if no suffix is specified. This differ from previous default of bytes, but is consistent with the rest of the places where we accept a size argument. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19set proper migration status on ->write error (v5)Marcelo Tosatti1-1/+7
If ->write fails, declare migration status as MIG_STATE_ERROR. Also, in buffered_file.c, ->close the object in case of an error. Fixes "migrate -d "exec:dd of=file", where dd fails to open file. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-30migration: Accept 'cont' only after successful incoming migrationAmit Shah1-0/+2
When a 'cont' is issued on a VM that's just waiting for an incoming migration, the VM reboots and boots into the guest, possibly corrupting its storage since it could be shared with another VM running elsewhere. Ensure that a VM started with '-incoming' is only run when an incoming migration successfully completes. A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont' failed due to no incoming migration has been attempted yet. Reported-by: Laine Stump <laine@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-01Monitor: handle optional '-' arg as a boolLuiz Capitulino1-9/+7
Historically, user monitor arguments beginning with '-' (eg. '-f') were passed as integers down to handlers. I've maintained this behavior in the new monitor because we didn't have a boolean type at the very beginning of QMP. Today we have it and this behavior is causing trouble to QMP's argument checker. This commit fixes the problem by doing the following changes: 1. User Monitor Before: the optional arg was represented as a QInt, we'd pass 1 down to handlers if the user specified the argument or 0 otherwise This commit: the optional arg is represented as a QBool, we pass true down to handlers if the user specified the argument, otherwise _nothing_ is passed 2. QMP Before: the client was required to pass the arg as QBool, but we'd convert it to QInt internally. If the argument wasn't passed, we'd pass 0 down This commit: still require a QBool, but doesn't do any conversion and doesn't pass any default value 3. Convert existing handlers (do_eject()/do_migrate()) to the new way Before: Both handlers would expect a QInt value, either 0 or 1 This commit: Change the handlers to accept a QBool, they handle the following cases: A) true is passed: the option is enabled B) false is passed: the option is disabled C) nothing is passed: option not specified, use default behavior Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-06-22Factorize common migration incoming codeJuan Quintela1-0/+13
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22Exit if incoming migration failsJuan Quintela1-6/+10
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-14migration: use qemu_free() instead of free().Yoshiaki Tamura1-1/+1
Although there is no difference, other migration related code use qemu_free(), and it should be better to be consistent. Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-03migration: respect exit status with exec:Anthony Liguori1-3/+14
This patch makes sure that if the exec: process exits with a non-zero return status, we treat the migration as failed. This fixes https://bugs.launchpad.net/qemu/+bug/391879 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-01Monitor: Drop QMP documentation from codeLuiz Capitulino1-38/+0
Previous commit added QMP documentation to the qemu-monitor.hx file, it's is a copy of this information. While it's good to keep it near code, maintaining two copies of the same information is too hard and has little benefit as we don't expect client writers to consult the code to find how to use a QMP command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_migrate() to cmd_new_ret()Luiz Capitulino1-12/+17
While there I'm also dropping a unneeded else clause (the last one in the function). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert simple handlers to cmd_new_ret()Luiz Capitulino1-4/+10
The following handlers always succeed and hence can be converted to cmd_new_ret() in the same commit. - do_stop() - do_quit() - do_system_reset() - do_system_powerdown() - do_migrate_cancel() - do_qmp_capabilities() - do_migrate_set_speed() - do_migrate_set_downtime() Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Monitor: remove unneeded checksLuiz Capitulino1-3/+0
It's not needed to check the return of qobject_from_jsonf() anymore, as an assert() has been added there. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-07Do not use dprintfmalc1-13/+13
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2010-02-03monitor: convert do_migrate_set_downtime() to QObjectMarkus Armbruster1-1/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Use argument type 'T' for migrate_set_downtimeMarkus Armbruster1-13/+2
Before, it used type 's', which strips quotes and interprets escapes, and is quite inappropriate for QMP. Negative arguments are no flushed to zero. Before, they were cast to uint32_t, which wrecked the sign. Ridiculously large arguments including infinities are now rejected. Before, they were interpreted as zero. Same for NaN. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: convert do_migrate_set_speed() to QObjectMarkus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Use argument type 'b' for migrate_set_speedMarkus Armbruster1-15/+3
Before, it used type 's', which strips quotes and interprets escapes, and is quite inappropriate for QMP. Negative arguments are no flushed to zero. Before, they were cast to uint32_t, which wrecked the sign. Ridiculously large arguments including infinities are now rejected. Before, they were interpreted as zero. Same for NaN. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-19Revert "monitor: Convert do_migrate_set_speed() to QObject"Anthony Liguori1-1/+1
This reverts commit 3a4921047d514c336531c304bec362c4d138ebcc. From Luiz: do_migrate_set_speed() accepts a suffix for the 'value' argument and this is not good for QMP. We will have to add a new argument type to handle that and this will have to wait for 0.13. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12migration: Convert do_info_migrate() to QObjectLuiz Capitulino1-15/+102
Return a QDict, which may contain up to more two QDicts, depending on the type of migration we're performing. IMPORTANT: as a QInt stores a int64_t integer, RAM values are going to be stored as int64_t and not as uint64_t as they are today. If this is a problem QInt will have to be changed. This commit should not change user output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Report progress also via info migrationJan Kiszka1-0/+9
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03live migration: Propagate output monitor to callback handlerJan Kiszka1-14/+16
In order to allow proper progress reporting to the monitor that initiated the migration, forward the monitor reference through the migration layer down to SaveLiveStateHandler. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03live migration: Allow cleanup after cancellation or errorJan Kiszka1-0/+1
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a live migration. This gives the involved subsystems a chance to clean up dynamically allocated resources. Namely, the block migration layer can now free its device descriptors and pending blocks. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03migration: Catch multiple start commandsJan Kiszka1-1/+7
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03migration: Fix use of file after releaseJan Kiszka1-3/+3
qemu_fclose frees the passed file structure, but do_migrate_set_speed may access it later on. Fix it by setting file NULL in migrate_fd_cleanup and checking for this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Block live migrationlirans@il.ibm.com1-7/+16
This patch introduces block migration called during live migration. Block are being copied to the destination in an async way. First the code will transfer the whole disk and then transfer all dirty blocks accumulted during the migration. Still need to improve transition from the iterative phase of migration to the end phase. For now transition will take place when all blocks transfered once, all the dirty blocks will be transfered during the end phase (guest is suspended). Changes from v4: - Global variabels moved to a global state structure allocated dynamically. - Minor coding style issues. - Poll block.c for tracking of dirty blocks instead of manage it here. Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27monitor: Convert do_migrate_cancel() to QObjectLuiz Capitulino1-1/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27monitor: Convert do_migrate_set_speed() to QObjectLuiz Capitulino1-1/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27monitor: Convert do_migrate() to QObjectLuiz Capitulino1-1/+1
Error is still directly printed, as we are only converting regular output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04monitor: Port handler_2 to use QDictLuiz Capitulino1-1/+3
This commit ports command handlers that receive two arguments to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04monitor: Port handler_1 to use QDictLuiz Capitulino1-2/+4
This commit ports command handlers that receive one argument to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04monitor: Port handler_0 to use QDictLuiz Capitulino1-1/+1
This commit ports command handlers that receive no arguments to use the new monitor's dictionary. It might seem no sense to do this, as the handlers have no arguments, but at the end of this porting work all handlers will have the same structure. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27add file descriptor migrationPaolo Bonzini1-0/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24Migration via unix sockets.Chris Lalancette1-0/+4
Implement migration via unix sockets. While you can fake this using exec and netcat, this involves forking another process and is generally not very nice. By doing this directly in qemu, we can avoid the copy through the external nc command. This is useful for implementations (such as libvirt) that want to do "secure" migration; we pipe the data on the sending side into the unix socket, libvirt picks it up, encrypts it, and transports it, and then on the remote side libvirt decrypts it, dumps it to another unix socket, and feeds it into qemu. The implementation is straightforward and looks very similar to migration-exec.c and migration-tcp.c Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10flush pending aio requestsGlauber Costa1-0/+1
When we finish migration, there may be pending async io requests in flight. If we don't flush it before stage3 starting, it might be the case that the guest loses it. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Make sure to only vm_start() a failed migration if we were running to beginAnthony Liguori1-1/+5
with. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16set migration max downtimeGlauber Costa1-0/+19
provide a monitor command to allow one to set the maximum downtime he is willing to suffer during migration, in seconds. "ms", "us", "ns" and "s" are accepted as modifiers. This parameter will be used by ram_save_live() code to determine a safe moment to enter stage 3 Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16add non-arbitrary migration stop conditionGlauber Costa1-0/+11
Currently, we're entering migration's stage 3 when a treshold of 10 pages remain to be transferred in the system. This has hurt some users. However, any proposed threshold is arbitrary by nature, and would only shift the annoyance. The proposal of this patch is to define a max_downtime variable, which represents the maximum downtime a migration user is willing to suffer. Then, based on the bandwidth of last iteration, we calculate how much data we can transfer in such a window of time. Whenever we reach that value (or lower), we know is safe to enter stage3. This has largely improved the situation for me. On localhost migrations, where one would expect things to go as quickly as me running away from the duty of writting software for windows, a kernel compile was enough to get the migration stuck. It takes 20 ~ 30 iterations now. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-13migrate_fd_close: delete associated io-handler before closing the fdUri Lublin1-0/+2
It may happen that the io-handler is still registered. That causes select() to return with EBADF, not calling handlers for other fds. The io-handler would be registered when (on the source) the whole state was written but not yet flushed. For example when using QEMUFileBuffered, (tcp-migration) there may be data left in a buffer waiting to be transferred. In such a case buffered_close() calls buffered_flush() which calls migrate_fd_put_buffer, which may, upon EAGAIN, register migrate_fd_put_notify as a handler. Signed-off-by: Uri Lublin <uril@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22allow changing the speed of a running migrationGlauber Costa1-0/+7
This patch allow us to call migrate_set_speed on running migrations. This should allow mgmt tools to increase the allocated bandwidth of a running migration if there is no progress, and they really want the migration to succeed. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22augment info migrate with page statusGlauber Costa1-0/+3
This patch augments info migrate output with status about: * ram bytes remaining * ram bytes transferred * ram bytes total This should be enough for management tools to realize whether or not there is progress in migration. We can add more information later on, if the need arrives [v2: fixes bytes_transferred type] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-20migrate.c: migrate_fd_put_buffer: Do not busyloop: stop writing if EWOULDBLOCKUri Lublin1-1/+1
The migration code is non-blocking, designed for live migration. Practically migrate_fd_put_buffer busy-loops trying to write, as on many machines EWOULDBLOCK==EAGAIN (look in include/asm-generic/errno.h). Signed-off-by: Uri Lublin <uril@redhat.com>
2009-04-05propagate error on failed completion (Glauber Costa)aliguori1-2/+8
migrate_fd_put_ready() calls qemu_savevm_state_complete(), but the later can fail. If it happens, re-start the vm and propagate the error up Based on a patch by Yaniv Kamay Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6997 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Introduce MONITOR_USE_READLINE flag (Jan Kiszka)aliguori1-2/+5
This allows to create monitor terminals that do not make use of the interactive readline back-end but rather send complete commands. The pass-through monitor interface of the gdbstub will be an example. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Decouple terminals (Jan Kiszka)aliguori1-4/+9
Currently all registered (and activate) monitor terminals work in broadcast mode: Everyone sees what someone else types on some other terminal and what the monitor reports back. This model is broken when you have a management monitor terminal that is automatically operated and some other terminal used for independent guest inspection. Such additional terminals can be multiplexed device channels or a gdb frontend connected to QEMU's stub. Therefore, this patch decouples the buffers and states of all monitor terminals, allowing the user to operate them independently. It finally starts to use the 'mon' parameter that was introduced earlier with the API rework. It also defines the default monitor: the first instantance that has the MONITOR_IS_DEFAULT flag set, and that is the monitor created via the "-monitor" command line switch (or "vc" if none is given). As the patch requires to rework the monitor suspension interface, it also takes the freedom to make it "truely" suspending (so far suspending meant suppressing the prompt, but inputs were still processed). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.1 at 2024-12-28 12:41:27 +0000