aboutsummaryrefslogtreecommitdiff
path: root/linux-user
AgeCommit message (Collapse)AuthorFilesLines
2014-11-11linux-user: Do not subtract offset from end addressTom Musta1-1/+1
When computing the upper address of a program segment, do not subtract the offset from the virtual address; instead compute the sum of the virtual address and the memory size. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-03elf: take phdr offset into account when calculating the program load addressJonas Maebe1-1/+1
The first program header does not necessarily start at offset 0. This change corresponds to what the Linux kernel does in load_elf_binary(). Signed-off-by: Jonas Maebe <jonas.maebe@elis.ugent.be> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-03linux-user: Fix fault address truncation AArch64Riku Voipio1-3/+1
On AArch64 the si_addr field of siginfo_t is truncated to 32 bits because the fault address passes through an uint32_t variable. Follow Peters suggestion and drop the uint32_t variable since its only used once in the Aarch64 loop. Reported-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-03linux-user: Let user specify random seedMagnus Reftel2-1/+19
This patch introduces the -seed command line option and the QEMU_RAND_SEED environment variable for setting the random seed, which is used for the AT_RANDOM ELF aux entry. Signed-off-by: Magnus Reftel <reftel@spotify.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06translate-all.c: memory walker initial address miscalculationMikhail Ilyin1-9/+9
The initial base address is miscalculated in walk_memory_regions(). It has to be shifted TARGET_PAGE_BITS more. Holder variables are extended to target_ulong size otherwise they don't fit for MIPS N32 (a 32-bit ABI with a 64-bit address space) and qemu won't compile. The issue led to incorrect debug output of memory maps and a mis-formed coredumped file. Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: don't include timerfd if not neededRiku Voipio1-1/+3
Without this, builds on older systems fail with: qemu/linux-user/syscall.c:61:25: warning: sys/timerfd.h: No such file or directory v2: fix the usual case where CONFIG_TIMERFD is enabled.. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: Simplify timerid checks on g_posix_timers rangeAlexander Graf1-13/+17
We check whether the passed in timer id is negative on all calls that involve g_posix_timers. However, these checks are bogus. First off we limit the timer_id to 16 bits which is not what Linux does. Then we check whether it's negative which it can't be because we masked it. We can safely remove the masking. For the negativity check we can just treat the timerid as unsigned and only check for upper boundaries. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: Convert blkpg to use a special subop handlerAlexander Graf3-2/+56
The blkpg ioctl can take different payloads depending on the opcode in its payload structure. Create a new special ioctl handler that can only deal with partition style ones for now. This patch fixes running parted for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: Enable epoll_pwait syscall for ARMPeter Maydell1-1/+1
We have support for the epoll_pwait syscall, but it wasn't enabled for ARM guests because we hadn't defined the syscall number; correct this deficiency. Reported-by: Dave Flogeras <dflogeras2@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-09-12exec.c: Relax restrictions on watchpoint length and alignmentPeter Maydell1-2/+1
The current implementation of watchpoints requires that they have a power of 2 length which is not greater than TARGET_PAGE_SIZE and that their address is a multiple of their length. Watchpoints on ARM don't fit these restrictions, so change the implementation so they can be relaxed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-09-08linux-user: Handle PPC64 ELFv2 Function PointersTom Musta1-10/+30
Function pointers in the 64-bit ELFv2 PowerPC ABI are actual (internal) entry point addresses. However, when invoking a function via a function pointer, GPR 12 must also be set to this address so that the TOC may be handled properly. Add this support to the invocation of a signal handler. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Implement do_setcontext for PPC64Tom Musta1-5/+5
Eliminate the stub for the do_setcontext() function for TARGET_PPC64. The implementation re-uses the existing TARGET_PPC32 code with the only change being the computation of the address of the register save area. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Properly Dereference PPC64 ELFv1 Signal Handler PointerTom Musta1-0/+29
Properly dereference 64-bit PPC ELF V1 ABIT function pointers to signal handlers. On this platform, function pointers are pointers to structures and the first 64 bits of such a structure contains the function's entry point. The second 64 bits contains the TOC pointer, which must be placed into GPR 2. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Enable Signal Handlers on PPC64Tom Musta1-48/+73
Enable the 64-bit PowerPC signal handling code that was previously disabled via #ifdefs. Specifically: - Move the target_mcontext (register save area) structure and append it to the 64-bit target_sigcontext structure. This provides the space on the stack for saving and restoring context. - Define the target_rt_sigframe for 64-bit. - Adjust the setup_frame and setup_rt_frame routines to properly select the target_mcontext area and trampoline within the stack frame; tthis is different for 32-bit and 64-bit implementations. - Adjust the do_setcontext stub for 64-bit so that it compiles without warnings. The 64-bit signal handling code is still not functional after this change; but the 32-bit code is. Subsequent changes will address specific issues with the 64-bit code. Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: fix build on 32bit hosts, ppc64abi32] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Split PPC Trampoline Encoding from Register SaveTom Musta1-6/+12
Split the encoding of the PowerPC sigreturn trampoline from the saving of register state onto the signal handler stack. This will make it easier in subsequent patches to deal with variations in the stack frame layouts between 32 and 64 bit PowerPC. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Fix Stack Pointer Bug in PPC setup_rt_frameTom Musta1-1/+1
The code that sets the stack frame back pointer is incorrect for the setup_rt_frame() code; qemu will abort (SIGSEGV) in some environments. The setup_frame code was fixed in commit beb526b12134a6b6744125deec5a7fe24a8f92e3 but the setup_rt_frame code was not. Make the setup_rt_frame code consistent with the setup_frame code. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-08-24linux-user: fix file descriptor leakszhanghailiang1-0/+1
Handle variable "fd_orig" going out of scope leaks the handle. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-22linux-user: check return value of malloc()zhanghailiang1-0/+4
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Acked-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: writev Partial WritesTom Musta1-2/+14
Although not technically not required by POSIX, the writev system call will typically write out its buffers individually. That is, if the first buffer is written successfully, but the second buffer pointer is invalid, then the first chuck will be written and its size is returned. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta18-1/+50
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: clock_nanosleep errno Handling on PPCTom Musta1-0/+8
The clock_nanosleep syscall is unusual in that it returns positive numbers in error handling situations, versus returning -1 and setting errno, or returning a negative errno value. On POWER, the kernel will set the SO bit of CR0 to indicate failure in a syscall. QEMU has generic handling to do this for syscalls with standard return values. Add special case code for clock_nanosleep to handle CR0 properly. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2Tom Musta18-1/+34
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was 2048 previously. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Move get_ppc64_abiTom Musta2-9/+10
The get_ppc64_abi is used to determine the ELF ABI (i.e. V1 or V2). This routine is currently implemented in the linux-user/elfload.c file but is useful in other scenarios. Move the routine to a more generally available location (linux-user/ppc/target_cpu.h). Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Detect fault in sched_rr_get_intervalTom Musta1-1/+1
Properly detect a fault when attempting to store into an invalid struct timespec pointer. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Handle NULL sched_param argument to sched_*Tom Musta1-0/+10
The sched_getparam, sched_setparam and sched_setscheduler system calls take a pointer argument to a sched_param structure. When this pointer is null, errno should be set to EINVAL. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Detect Negative Message Sizes in msgsnd System CallTom Musta1-1/+5
The msgsnd system call takes an argument that describes the message size (msgsz) and is of type size_t. The system call should set errno to EINVAL in the event that a negative message size is passed. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Conditionally Pass Attribute Pointer to mq_open()Tom Musta1-3/+7
The mq_open system call takes an optional struct mq_attr pointer argument in the fourth position. This pointer is used when O_CREAT is specified in the flags (second) argument. It may be NULL, in which case the queue is created with implementation defined attributes. Change the code to properly handle the case when NULL is passed in the arg4 position. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Make ipc syscall's third argument an abi_longTom Musta1-4/+4
For those target ABIs that use the ipc system call (e.g. POWER), the third argument is used in the shmat path as a pointer. It therefore must be declared as an abi_long (versus int) so that the address bits are not lost in truncation. In fact, all arguments to do_ipc should be declared as abit_long. In fact, it makes more sense for all of the arguments to be declaried as abi_long (except call). Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Properly Handle semun Structure In Cross-Endian SituationsTom Musta1-2/+11
The semun union used in the semctl system call contains both an int (val) and pointers. In cross-endian situations on 64 bit targets, the value passed to semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val field in the correct location. In order to rectify this, the other half of the union must be accessed. This is achieved in code by performing a byte swap on the entire 8 byte union, followed by a 4-byte swap of the first half. Also, eliminate an extraneous (dead) line of code that sets target_su.val in the IPC_SET/IPC_GET case. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Dereference Pointer Argument to ipc/semctl Sys CallTom Musta1-2/+8
When the ipc system call is used to wrap a semctl system call, the ptr argument to ipc needs to be dereferenced prior to passing it to the semctl handler. This is because the fourth argument to semctl is a union and not a pointer to a union. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: PPC64 semid_ds Doesnt Include _unused1 and _unused2Tom Musta1-0/+4
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2 elements of the semid_ds structure from <sys/sem.h>. So eliminate these from the target_semid_ds structure. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: add setns and unshareRiku Voipio2-0/+14
Add support for the setns and unshare syscalls, trivially passed through to the host. Based on patches by Paul Burton, added configure check. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: support ioprio_{get, set} syscallsPaul Burton1-0/+18
Add support for the ioprio_get & ioprio_set syscalls, allowing their use by target programs. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: support timerfd_{create, gettime, settime} syscallsRiku Voipio2-0/+54
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime syscalls, allowing use of timerfds by target programs. v2: By Riku - added configure check for timerfd and ifdefs for benefit of old distributions like RHEL5. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: fix readlink handling with magic exe symlinkMike Frysinger1-2/+13
The current code always returns the length of the path when it should be returning the number of bytes it wrote to the output string. Further, readlink is not supposed to append a NUL byte, but the current snprintf logic will always do just that. Even further, if you pass in a length of 0, you're suppoesd to get back an error (EINVAL), but the current logic just returns 0. Further still, if there was an error reading the symlink, we should not go ahead and try to read the target buffer as it is garbage. Simple test for the first two issues: $ cat test.c int main() { char buf[50]; size_t len; for (len = 0; len < 10; ++len) { memset(buf, '!', sizeof(buf)); ssize_t ret = readlink("/proc/self/exe", buf, len); buf[20] = '\0'; printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret); } return 0; } Now compare the output of the native: $ gcc test.c -o /tmp/x $ /tmp/x $ strace /tmp/x With what qemu does: $ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static $ qemu-arm /tmp/x $ qemu-arm -strace /tmp/x Signed-off-by: Mike Frysinger <vapier@chromium.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Fix conversion of sigevent argument to timer_createPeter Maydell1-8/+30
There were a number of bugs in the conversion of the sigevent argument to timer_create from target to host format: * signal number not converted from target to host * thread ID not copied across * sigev_value not copied across * we never unlocked the struct when we were done Between them, these problems meant that SIGEV_THREAD_ID timers (and the glibc-implemented SIGEV_THREAD timers which depend on them) didn't work. Fix these problems and clean up the code a little by pulling the struct conversion out into its own function, in line with how we convert various other structs. This allows the test program in bug LP:1042388 to run. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Fix syscall instruction usermode emulation on X86_64Jincheng Miao1-1/+0
Currently syscall instruction is buggy on user mode X86_64, the EIP is updated after do_syscall(), that is too late for clone(). Because clone() will create a thread at the env->EIP (the address of syscall insn), and then child thread enters do_syscall() again, that is not expected. Sometimes it is tragic. User mode syscall insn emulation is not used MSR, so the action should be same to INT 0x80. INT 0x80 will update EIP in do_interrupt(), ditto for syscall() for consistency. Signed-off-by: Jincheng Miao <jmiao@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: redirect openat callsRiku Voipio1-14/+9
While Mikhail fixed /proc/self/maps, it was noticed openat calls are not redirected currently. Some archs don't have open at all, so openat needs to be redirected. Fix this by consolidating open/openat code to do_openat - open is implemented using openat(AT_FDCWD, ... ), which according to open(2) man page is identical. Since all targets now have openat, remove the ifdef around sys_openat and openat: case in do_syscall. Cc: Mikhail Ilin <m.ilin@samsung.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: /proc/self/maps contentMikhail Ilyin1-15/+10
Build /proc/self/maps doing a match against guest memory translation table. Output only that map records which are valid for guest memory layout. Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15linux-user: use TARGET_SA_ONSTACK in get_sigframeRiku Voipio1-3/+4
As reported by Laurent, which should use TARGET_SA_ONSTACK on arm, microblaze and openrisc targets like we do on all others. Practical matter is minimal as for almost all archs SA_ONSTACK is 0x08000000: http://lxr.free-electrons.com/ident?i=SA_ONSTACK Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15alloca one extra byte socketsJoakim Tjernlund1-3/+3
target_to_host_sockaddr() may increase the lenth with 1 byte for AF_UNIX sockets so allocate 1 extra byte. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15linux-user: handle AF_PACKET sockaddrs in target_to_host_sockaddrJoakim Tjernlund2-0/+17
Implement conversion of the AF_PACKET sockaddr subtype in target_to_host_sockaddr. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15qemu-user: Impl. setsockopt(SO_BINDTODEVICE)Joakim Tjernlund1-0/+19
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15SIOCGIFINDEX: fix typoJoakim Tjernlund1-1/+1
Wrong type was used in ioctl definition. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-08target-ppc: Change default cpu for ppc64le-linux-userRichard Henderson1-4/+4
The default, 970fx, doesn't support MSR_LE. So even though we set LE in ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a user-selected cpu model doesn't support LE. Signed-off-by: Richard Henderson <rth@twiddle.net> [agraf: switch to POWER7 as default for BE and LE] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-29Merge remote-tracking branch 'remotes/riku/linux-user-for-upstream' into stagingPeter Maydell5-27/+207
* remotes/riku/linux-user-for-upstream: linux-user: support the SIOCGIFINDEX ioctl linux-user: support the KDSIGACCEPT ioctl linux-user: allow NULL tv argument for settimeofday linux-user: respect timezone for settimeofday linux-user: fix struct target_epoll_event layout for MIPS linux-user: support strace of epoll_create1 linux-user: allow NULL arguments to mount linux-user: support SO_PASSSEC setsockopt option linux-user: support SO_{SND, RCV}BUFFORCE setsockopt options linux-user: support SO_ACCEPTCONN getsockopt option linux-user: translate the result of getsockopt SO_TYPE linux-user: added fake open() for /proc/self/cmdline Add support for MAP_NORESERVE mmap flag. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-29linux-user: support the SIOCGIFINDEX ioctlPaul Burton2-0/+2
Add a definition of the SIOCGIFINDEX ioctl, allowing its use by target programs. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29linux-user: support the KDSIGACCEPT ioctlPaul Burton3-0/+9
Add a definition of the KDSIGACCEPT ioctl & allow its use by target programs. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29linux-user: allow NULL tv argument for settimeofdayPaul Burton1-4/+8
The tv argument to the settimeofday syscall is allowed to be NULL, if the program only wishes to provide the timezone. QEMU previously returned -EFAULT when tv was NULL. Instead, execute the syscall & provide NULL to the kernel as the target program expected. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29linux-user: respect timezone for settimeofdayPaul Burton2-1/+33
The settimeofday syscall accepts a tz argument indicating the desired timezone to the kernel. QEMU previously ignored any argument provided by the target program & always passed NULL to the kernel. Instead, translate the argument & pass along the data userland provided. Although this argument is described by the settimeofday man page as obsolete, it is used by systemd as of version 213. Signed-off-by: Paul Burton <paul@archlinuxmips.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.1 at 2024-12-23 01:14:16 +0000