aboutsummaryrefslogtreecommitdiff
path: root/linux-user
AgeCommit message (Collapse)AuthorFilesLines
2013-06-12linux-user: Drop direct use of openat etc syscallsPeter Maydell1-194/+24
The linux-user syscall emulation layer currently supports the openat family of syscalls via two mechanisms: simply calling the corresponding libc functions, and making direct syscalls. Since glibc has supported these functions since at least glibc 2.5, there's no real need to retain the (essentially untested) direct syscall fallback code, so simply delete it. This allows us to remove some ifdeffery that was attempting to disable provision of some of the syscalls if the host didn't seem to support them, which in some cases was actually wrong (eg where there are several flavours of the syscall and we only need one of them, not necessarily the exact one the guest has, as with the fstatat* calls). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Message-id: 1370126121-22975-2-git-send-email-peter.maydell@linaro.org
2013-06-12linux-user: Allow getdents to be provided by getdents64Peter Maydell1-1/+60
Newer architectures may only implement the getdents64 syscall, not getdents. Provide an implementation of getdents in terms of getdents64 so that we can run getdents-using targets on a getdents64-only host. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Message-id: 1370344377-27445-1-git-send-email-peter.maydell@linaro.org Message-id: 1370193044-24535-1-git-send-email-peter.maydell@linaro.org
2013-06-01linux-user: Fix typo in commentLei Li1-1/+1
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-22Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-2/+2
# By Christophe Lyon (1) and others # Via Michael Tokarev * mjt/trivial-patches: target-moxie: replace target_phys_addr_t with hwaddr Rename hexdump to avoid FreeBSD libutil conflict remove some double-includes translate: remove redundantly included qemu/timer.h Remove twice include of qemu-common.h fix /proc/self/maps output Message-id: 51977B44.1000302@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-20linux-user: Save the correct resume address for MIPS signal handlingKwok Cheung Yeung1-1/+2
The current ISA mode needs to be saved in bit 0 of the resume address. If the current instruction happens to be in a branch delay slot, then the address of the preceding jump instruction should be stored instead. exception_resume_pc already does both of these tasks, so it is made available and reused. MIPS_HFLAG_BMASK in hflags is cleared, otherwise QEMU may treat the first instruction of the signal handler as a delay slot instruction. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-20linux-user: Fix MIPS ISA transitions during signal handlingKwok Cheung Yeung1-0/+13
Processors supporting the MIPS16 or microMIPS ISAs set bit 0 in target addresses to indicate that the target is written using a compressed ISA. During signal handling, when jumping to or returning from a signal handler, bit 0 of the destination PC is inspected and MIPS_HFLAG_M16 in hflags cleared or set accordingly. Bit 0 of the PC is then cleared. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-18fix /proc/self/maps outputChristophe Lyon1-2/+2
Add a space at end of line when there is no filename to print, to conform to linux kernel format (see show_map_vma() in fs/proc/task_mmu.c). Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-02target-i386: Replace cpuid_*features fields with a feature word arrayEduardo Habkost2-3/+3
This replaces the feature-bit fields on both X86CPU and x86_def_t structs with an array. With this, we will be able to simplify code that simply does the same operation on all feature words (e.g. kvm_check_features_against_host(), filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit property lookup/registration, and the proposed "feature-words" property) The following field replacements were made on X86CPU and x86_def_t: (cpuid_)features -> features[FEAT_1_EDX] (cpuid_)ext_features -> features[FEAT_1_ECX] (cpuid_)ext2_features -> features[FEAT_8000_0001_EDX] (cpuid_)ext3_features -> features[FEAT_8000_0001_ECX] (cpuid_)ext4_features -> features[FEAT_C000_0001_EDX] (cpuid_)kvm_features -> features[FEAT_KVM] (cpuid_)svm_features -> features[FEAT_SVM] (cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-26linux-user: fix compile error due to stray colon at end of #ifdef linePeter Maydell1-1/+1
Remove a stray colon from the end of a #ifdef line. Some versions of gcc complain about this: linux-user/syscall.c: In function ‘do_syscall’: linux-user/syscall.c:7606:28: error: extra tokens at end of #ifdef directive [-Werror] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19linux-user: fix setgroups/getgroups for non-UID16 archsAndreas Schwab1-3/+3
Don't assume target_id is a short. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19linux-user: fix undefined shift in copy_to_user_fdsetAndreas Schwab1-1/+1
If TARGET_ABI_BITS is bigger than 32 we shift by more than the size of int. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19linux-user: change do_semop to return target errno when unsuccessfulPetar Jovanovic1-2/+2
do_semop() is called from two places, and one of these fails to convert return error to target errno when semop fails. This patch changes the function to always return target errno in case of an unsuccessful call. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-18elfload: use abi_llong/ullong instead of target_llong/ullongPaolo Bonzini1-2/+2
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_int/uint instead of target_int/uintPaolo Bonzini1-7/+7
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_short/ushort instead of target_short/ushortPaolo Bonzini1-3/+3
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use tswapreg consistently in elf_core_copy_regsPaolo Bonzini1-57/+57
Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: fix size of registers for N32Paolo Bonzini1-7/+14
Registers are 64-bit in size for the MIPS n32 ABI. Define target_elf_greg_t accordingly, and use the correct function to do endian swaps. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: fix size of ABI-dependent fields in core dumpsPaolo Bonzini1-9/+9
Some fields in core dumps are 32-bit in 32-or-64 environments (ppc64abi32, sparc32plus). Use abi_long/ulong for those. Also, the fields of target_elf_siginfo are ints. Use tswap32 to convert them. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-12linux-user: pass correct host flags to eventfd2 callPetar Jovanovic1-1/+10
This change makes conversion of TARGET_O_NONBLOCK and TARGET_O_CLOEXEC flags to host flags before calling eventfd for TARGET_NR_eventfd2. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-05linux-user: Don't omit comma for strace of rt_sigaction()Peter Maydell1-1/+1
Pass the 'last' parameter of print_signal() through to print_raw_param(); this fixes a problem where we weren't printing the comma separator for strace of rt_sigaction() when the signal was an unnamed (ie realtime) one: 6856 rt_sigaction(230xf6fff870,0xf6fff8fc) = 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-11linux-user/syscall.c: Don't warn about unimplemented get_robust_listPeter Maydell1-1/+14
The nature of the kernel ABI for the get_robust_list and set_robust_list syscalls means we cannot implement them in QEMU. Make get_robust_list silently return ENOSYS rather than using the default "print message and then fail ENOSYS" code path, in the same way we already do for set_robust_list, and add a comment documenting why we do this. This silences warnings which were being produced for emulating even trivial programs like 'ls' in x86-64-on-x86-64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Implement accept4Peter Maydell1-8/+31
Implement the accept4 syscall (which is identical to accept but has an additional flags argument). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Implement sendfile and sendfile64Peter Maydell1-0/+53
Implement the sendfile and sendfile64 syscalls. This implementation passes all the LTP test cases for these syscalls. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: make bogus negative iovec lengths fail EINVALPeter Maydell1-1/+1
If the guest passes us a bogus negative length for an iovec, fail EINVAL rather than proceeding blindly forward. This fixes some of the error cases tests for readv and writev in the LTP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Fix layout of usage table to account for option textPeter Maydell1-8/+16
The linux-user usage message attempts to line up the columns in its table by calculating the maximum width of any item in them. However for the 'Argument' column it was only accounting for the length of the option switch (eg "-d"), not the additional example text (eg "item[,...]"). This currently has no adverse effects because the widest item in the column happens to be the argumentless "-singlestep" option, but improving the "-d" option help to read "-d item[,...]" exceeds that limit. Fix this by correctly calculating maxarglen as the width of the first column text including a possible option argument, and adjusting its uses to match. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Add more sparc syscall numbersDillon Amburgey1-0/+2
Signed-off-by: Dillon Amburgey <dillona@dillona.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Support setgroups syscall with no groupsDillon Amburgey1-10/+12
Signed-off-by: Dillon Amburgey <dillona@dillona.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: fix futex strace of FUTEX_CLOCK_REALTIMEJohn Rigby1-0/+6
Handle same as existing FUTEX_PRIVATE_FLAG. Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user/syscall.c: handle FUTEX_WAIT_BITSET in do_futexJohn Rigby1-1/+2
Upstream libc has recently changed to start using FUTEX_WAIT_BITSET instead of FUTEX_WAIT and this is causing do_futex to return -TARGET_ENOSYS. Pass bitset in val3 to sys_futex which will be ignored by kernel for the FUTEX_WAIT case. Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: improve print_fcntl()Laurent Vivier1-18/+79
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11linux-user: Add Alpha socket constantsDillon Amburgey1-0/+69
Without these, some networking programs will not work Signed-off-by: Dillon Amburgey <dillona@dillona.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-05mipsn32-linux-user: Configure the architecture properlyRichard Henderson6-1121/+626
N32 is a 64-bit cpu with a 32-bit address space. We have existing cpp defines for this situation, but weren't using them. This does mean that the linux-user/mipsn32 directory must be merged with the linux-user/mips64 directory, and differences must be resolved via ifdefs. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Fix n32 and n64 syscallsRichard Henderson1-7/+18
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Save and restore fpu and dsp from sigcontextRichard Henderson1-115/+42
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Share o32 code for n32 and n64 signalsRichard Henderson1-1/+29
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Delete n32 and n64 signal stubsRichard Henderson1-58/+0
Deleting these first makes the next patch much easier to read. This doesn't cause any sort of compilation failure because we have not yet enabled n32/n64 compilation. This is dead code. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-04target-mips: Translate breaks and traps into the appropriate signalMeador Inge1-1/+75
GCC and GAS are capable of generating traps or breaks to check for division by zero. Additionally, GAS is capable of generating traps or breaks to check for overflow on certain division and multiplication operations. The Linux kernel translates these traps and breaks into signals. This patch implements the corresponding feature in QEMU. Signed-off-by: Meador Inge <meadori@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell1-11/+5
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-16cpu: Move running field to CPUStateAndreas Färber1-15/+22
Pass CPUState to cpu_exec_{start,end}() functions. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16cpu: Move host_tid field to CPUStateAndreas Färber1-1/+3
Change gdbstub's cpu_index() argument to CPUState now that CPUArchState is no longer used. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16qemu-log: Rename the public-facing cpu_set_log function to qemu_set_logPeter Maydell1-1/+1
Rename the public-facing function cpu_set_log to qemu_set_log. This requires us to rename the internal-only qemu_set_log() to do_qemu_set_log(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename cpu_str_to_log_mask to qemu_str_to_log_maskPeter Maydell1-1/+1
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since the qemu_log functionality is no longer restricted to TCG CPU debug logging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Abstract out "print usage message about valid log categories"Peter Maydell1-5/+1
Abstract out the "print a human readable list of all the valid log categories" functionality which is currently duplicated in three separate places. (We leave the monitor.c help_cmd() implementation as-is since it wants to send the message to the monitor and add its own information.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Unify {cpu_set,set_cpu}_log_filename as qemu_set_log_filenamePeter Maydell1-2/+2
The qemu_log() functionality is no longer specific to TCG CPU debug logs. Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the pointless wrapper set_cpu_log_filename(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16TCG: Move translation block variables to new context inside tcg_ctx: tb_ctxEvgeny Voevodin1-3/+3
It's worth to clean-up translation blocks variables and move them into one context as was suggested by Swirl. Also if we use this context directly inside tcg_ctx, then it speeds up code generation a bit. Signed-off-by: Evgeny Voevodin <evgenyvoevodin@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-06Merge branch 'for-linux-user' of ↵Anthony Liguori2-13/+37
https://git.gitorious.org/qemu-m68k/qemu-m68k into staging * 'for-linux-user' of https://git.gitorious.org/qemu-m68k/qemu-m68k: linux-user: correct reboot() linux-user: correct setsockopt() linux-user: correct print_timeval() swap tv_sec and tv_usec linux-user: correct msgrcv() Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06linux-user: Restore cast to target type in get_user()Peter Maydell1-2/+2
Commit 658f2dc97 accidentally dropped the cast to the target type of the value loaded by get_user(). The most visible effect of this would be that the sequence "uint64_t v; get_user_u32(v, addr)" would sign extend the 32 bit loaded value into v rather than zero extending as would be expected for a _u32 accessor. Put the cast back again to restore the old behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01cpu: do not use object_deletePaolo Bonzini1-1/+1
CPUs are never added to the composition tree, so delete is achieved simply by removing the last references to them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01linux-user: bsd-user: Don't reset X86CPU twiceAndreas Färber1-1/+1
Since commit 65dee38052597b6285eb208125369f01b29ba6c1 (target-i386: move cpu_reset and reset callback to cpu.c) the x86 CPU is reset through cpu_init() but was still reset immediately after in linux-user and bsd-user. Clean this up. Similarly in linux-user/syscall.c it is also reset after cpu_copy(). But that's a bug of its own, fixing which poses a semantic change. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2013-01-30linux-user: correct reboot()Laurent Vivier1-4/+12
According to man reboot(2), the 4th argument is only used with LINUX_REBOOT_CMD_RESTART2. In other cases, trying to convert the value can generate EFAULT. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-12-29 09:34:02 +0000