aboutsummaryrefslogtreecommitdiff
path: root/linux-user/qemu.h
AgeCommit message (Collapse)AuthorFilesLines
2017-01-22linux-user: Support stack-grows-up in elfload.cRichard Henderson1-0/+3
HPPA is a (the) stack-grows-up target, and supporting that requires rearranging how we compute addresses while laying out the initial program stack. In addition, hppa32 requires 64-byte stack alignment so parameterize that as well. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-21linux-user: Pass si_type information to queue_signal() explicitlyPeter Maydell1-1/+2
Instead of assuming in queue_signal() that all callers are passing a siginfo structure which uses the _sifields._sigfault part of the union (and thus a si_type of QEMU_SI_FAULT), make callers pass the si_type they require in as an argument. [RV adjusted to apply] Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21linux-user: report signals being taken in strace outputPeter Maydell1-0/+10
Native strace reports when the process being traced takes a signal: --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} --- Report something similar when QEMU is doing its internal strace of the guest process and is about to deliver it a signal. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-15linux-user/qemu.h: change malloc to g_malloc, free to g_freeMd Haris Iqbal1-2/+2
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-07-26exec: Reduce CONFIG_USER_ONLY ifdeffeneryIgor Mammedov1-2/+0
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-04linux-user: Make semihosting heap/stack fields abi_ulongsPeter Maydell1-3/+3
The fields in the TaskState heap_base, heap_limit and stack_base are all guest addresses (representing the locations of the heap and stack for the guest binary), so they should be abi_ulong rather than uint32_t. (This only in practice affects ARM AArch64 since all the other semihosting implementations are 32-bit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 1466783381-29506-2-git-send-email-peter.maydell@linaro.org
2016-06-26linux-user: Don't use sigfillset() on uc->uc_sigmaskPeter Maydell1-0/+5
The kernel and libc have different ideas about what a sigset_t is -- for the kernel it is only _NSIG / 8 bytes in size (usually 8 bytes), but for libc it is much larger, 128 bytes. In most situations the difference doesn't matter, because if you pass a pointer to a libc sigset_t to the kernel it just acts on the first 8 bytes of it, but for the ucontext_t* argument to a signal handler it trips us up. The kernel allocates this ucontext_t on the stack according to its idea of the sigset_t type, but the type of the ucontext_t defined by the libc headers uses the libc type, and so do the manipulator functions like sigfillset(). This means that (1) sizeof(uc->uc_sigmask) is much larger than the actual space used on the stack (2) sigfillset(&uc->uc_sigmask) will write garbage 0xff bytes off the end of the structure, which can trash data that was on the stack before the signal handler was invoked, and may result in a crash after the handler returns To avoid this, we use a memset() of the correct size to fill the signal mask rather than using the libc function. This fixes a problem where we would crash at least some of the time on an i386 host when a signal was taken. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08linux-user: Make target_strerror() return 'const char *'Peter Maydell1-1/+1
Make target_strerror() return 'const char *' rather than just 'char *'; this will allow us to return constant strings from it for some special cases. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu>
2016-06-07linux-user: Queue synchronous signals separatelyTimothy E Baldwin1-0/+1
If a synchronous signal and an asynchronous signal arrive near simultaneously, and the signal number of the asynchronous signal is lower than that of the synchronous signal the the handler for the asynchronous would be called first, and then the handler for the synchronous signal would be called within or after the first handler with an incorrect context. This is fixed by queuing synchronous signals separately. Note that this does risk delaying a asynchronous signal until the synchronous signal handler returns rather than handling the signal on another thread, but this seems unlikely to cause problems for real guest programs and is unavoidable unless we could guarantee to roll back and reexecute whatever guest instruction caused the synchronous signal (which would be a bit odd if we've already logged its execution, for instance, and would require careful analysis of all guest CPUs to check it was possible in all cases). Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-24-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: added a comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Remove real-time signal queuingTimothy E Baldwin1-10/+1
As host signals are now blocked whenever guest signals are blocked, the queue of realtime signals is now in Linux. The QEMU queue is now redundant and can be removed. (We already did not queue non-RT signals, and none of the calls to queue_signal() except the one in host_signal_handler() pass an RT signal number.) Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: minor commit message tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Fix race between multiple signalsPeter Maydell1-2/+48
If multiple host signals are received in quick succession they would be queued in TaskState then delivered to the guest in spite of signals being supposed to be blocked by the guest signal handler's sa_mask. Fix this by decoupling the guest signal mask from the host signal mask, so we can have protected sections where all host signals are blocked. In particular we block signals from when host_signal_handler() queues a signal from the guest until process_pending_signals() has unqueued it. We also block signals while we are manipulating the guest signal mask in emulation of sigprocmask and similar syscalls. Blocking host signals also ensures the correct behaviour with respect to multiple threads and the overrun count of timer related signals. Alas blocking and queuing in qemu is still needed because of virtual processor exceptions, SIGSEGV and SIGBUS. Blocking signals inside process_pending_signals() protects against concurrency problems that would otherwise happen if host_signal_handler() ran and accessed the signal data structures while process_pending_signals() was manipulating them. Since we now track the guest signal mask separately from that of the host, the sigsuspend system calls must track the signal mask passed to them, because when we process signals as we leave the sigsuspend the guest signal mask in force is that passed to sigsuspend. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: make signal_pending a simple flag rather than a word with two flag bits; ensure we don't call block_signals() twice in sigreturn codepaths; document and assert() the guarantee that using do_sigprocmask() to get the current mask never fails; use the qemu atomics.h functions rather than raw volatile variable access; add extra commentary and documentation; block SIGSEGV/SIGBUS in block_signals() and in process_pending_signals() because they can't occur synchronously here; check the right do_sigprocmask() call for errors in ssetmask syscall; expand commit message; fixed sigsuspend() hanging] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27linux-user: Provide safe_syscall for fixing races between signals and syscallsTimothy E Baldwin1-1/+126
If a signal is delivered immediately before a blocking system call the handler will only be called after the system call returns, which may be a long time later or never. This is fixed by using a function (safe_syscall) that checks if a guest signal is pending prior to making a system call, and if so does not call the system call and returns -TARGET_ERESTARTSYS. If a signal is received between the check and the system call host_signal_handler() rewinds execution to before the check. This rewinding has the effect of closing the race window so that safe_syscall will reliably either (a) go into the host syscall with no unprocessed guest signals pending or or (b) return -TARGET_ERESTARTSYS so that the caller can deal with the signals. Implementing this requires a per-host-architecture assembly language fragment. This will also resolve the mishandling of the SA_RESTART flag where we would restart a host system call and not call the guest signal handler until the syscall finally completed -- syscall restarting now always happens at the guest syscall level so the guest signal handler will run. (The host syscall will never be restarted because if the host kernel rewinds the PC to point at the syscall insn for a restart then our host_signal_handler() will see this and arrange the guest PC rewind.) This commit contains the infrastructure for implementing safe_syscall and the assembly language fragment for x86-64, but does not change any syscalls to use it. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: * Avoid having an architecture if-ladder in configure by putting linux-user/host/$(ARCH) on the include path and including safe-syscall.inc.S from it * Avoid ifdef ladder in signal.c by creating new hostdep.h to hold host-architecture-specific things * Added copyright/license header to safe-syscall.inc.S * Rewrote commit message * Added comments to safe-syscall.inc.S * Changed calling convention of safe_syscall() to match syscall() (returns -1 and host error in errno on failure) * Added a long comment in qemu.h about how to use safe_syscall() to implement guest syscalls. ] RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts" patch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-19cpu: move exec-all.h inclusion out of cpu.hPaolo Bonzini1-0/+1
exec-all.h contains TCG-specific definitions. It is not needed outside TCG-specific files such as translate.c, exec.c or *helper.c. One generic function had snuck into include/exec/exec-all.h; move it to include/qom/cpu.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova1-1/+1
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23all: Clean up includesPeter Maydell1-3/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-28linux-user: remove MAX_ARG_PAGES limitStefan Brüns1-7/+0
Instead of creating a temporary copy for the whole environment and the arguments, directly copy everything to the target stack. For this to work, we have to change the order of stack creation and copying the arguments. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28linux-user: remove unused image_info membersStefan Brüns1-2/+0
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-09exec: make mmap_lock/mmap_unlock globally availablePaolo Bonzini1-2/+0
There is some iffy lock hierarchy going on in translate-all.c. To fix it, we need to take the mmap_lock in cpu-exec.c. Make the functions globally available. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-17linux-user: fix gcc-4.9 compiler error on __{get,put]}_userRiku Voipio1-6/+6
gcc-4.9 finds unused operand: linux-user/syscall.c: In function ‘host_to_target_stat64’: linux-user/qemu.h:301:19: error: right-hand operand of comma expression has no effect [-Werror=unused-value] ((hptr), (x)), 0) Just removing the rh operand is no good, it will error in later: linux-user/main.c: In function ‘arm_kernel_cmpxchg64_helper’: linux-user/qemu.h:330:15: error: void value not ignored as it ought to be __ret = __put_user((x), __hptr); \ Thus, remove setting __ret from __get_user and __put_user, as and set the right hand operand to (void)0 to make it clear that these return never nothing. This commit depends on the signal.c cleanup, to ensure bisectable version history. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini1-0/+1
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-17linux-user: Don't allow guest to block SIGSEGVPeter Maydell1-0/+1
Don't allow the linux-user guest to block SIGSEGV -- QEMU needs this signal to detect accesses to pages which it has marked read-only because it has cached translated code from them. We implement this by making the do_sigprocmask() wrapper suppress SIGSEGV when doing the host process signal mask manipulation; instead we store the current state of SIGSEGV in the TaskState struct. If we get a SIGSEGV for the guest when the guest has blocked the signal, we treat it as if the default SEGV handler was in place, as the kernel does for forced SIGSEGV delivery. This patch is based on an idea by Alex Barcelo, but rather than simply lying to the guest about the SIGSEGV state we track it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17signal: added a wrapper for sigprocmask functionAlex Barcelo1-0/+1
Create a wrapper for signal mask changes initiated by the guest; (this includes syscalls and also the sigreturns from signal.c) this will give us a place to put code which prevents the guest from changing the handling of signals used by QEMU itself internally. The wrapper is called from all the guest-initiated sigprocmask, but is not called from internal qemu sigprocmask calls. Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu> [PMM: Added calls to wrapper for sigprocmask uses in signal.c when setting the signal mask on entry and exit from signal handlers, since these also are guest-provided signal masks.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-01-10linux-user: Remove regs parameter of load_elf_binary and load_flt_binaryWill Newton1-4/+2
The regs parameter is not used anywhere, so remove it. Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29linux-user: create target_structs header to place ipc_perm and shmid_dsPetar Jovanovic1-0/+1
Creating target_structs header in linux-user/$arch/ and making target_ipc_perm and target_shmid_ds its first inhabitants. The struct defintions may/should be further fine-tuned by arch maintainers. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24linux-user: add support of binfmt_misc 'O' flagLaurent Vivier1-1/+1
The binfmt_misc module can calculate the credentials and security token according to the binary instead of to the interpreter if the 'C' flag is enabled. To be able to execute non-readable binaries, this flag implies 'O' flag. When 'O' flag is enabled, bintfmt_misc opens the file for reading and pass the file descriptor to the interpreter. References: linux/Documentation/binfmt_misc.txt ['O' and 'C' description] linux/fs/binfmt_misc.c linux/fs/binfmt_elf.c [ AT_EXECFD usage ] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-20*-user: Improve documentation for lock_user functionStefan Weil1-2/+2
Add a missing "function" and replace "and" by "any". BSD and Linux use the same documentation here, so fix both. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20*-user: Fix typo in comment (ulocking -> unlocking)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-10linux-user: Allow targets to specify a minimum uname releasePeter Maydell1-0/+1
For newer target architectures, glibc can be picky about the kernel version: for example, it will not run on an aarch64 system unless the kernel reports itself as at least 3.8.0. Accommodate this by enhancing the existing support for faking the kernel version so that each target can optionally specify a minimum version: if the user doesn't force a specific fake version then we will override with the minimum required version only if the real host kernel version is insufficient. Use this facility to let aarch64 report a minimum of 3.8.0. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
2013-09-10linux-user: Make sure NWFPE code is 32 bit ARM onlyPeter Maydell1-1/+3
On ARM, linux-user emulation includes NWFPE support for emulating the ancient FPA floating point coprocessor. This has long since been superseded by VFP and is only required for legacy binaries. The AArch64 linux-user target doesn't compile in NWFPE support, so make sure the relevant code is protected by suitable ifdefs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-18-git-send-email-peter.maydell@linaro.org
2013-07-22configure: Make NPTL non-optionalPeter Maydell1-10/+0
Now all linux-user targets support building with NPTL, we can make it mandatory. This is a good idea because: * NPTL is no longer new and experimental; it is completely standard * in practice, linux-user without NPTL is nearly useless for binaries built against non-ancient glibc * it allows us to delete the rather untested code for handling the non-NPTL configuration Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the bsd-user codebase alone. This makes no change for bsd-user, since our configure test for NPTL had a "#include <linux/futex.h>" which means bsd-user would never have been compiled with CONFIG_USE_NPTL defined, and it still is not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for m68kPeter Maydell1-0/+1
For m68k, per-thread data is a purely kernel construct with no CPU level support. Implement it via a field in the TaskState structure, used by cpu_set_tls() and the set_thread_area/get_thread_area syscalls. This allows us to enable compilation with NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Move includes of target-specific headers to end of qemu.hPeter Maydell1-2/+7
The target-specific headers (target_cpu.h and target_signal.h) might need to use the target-independent structure and function definitions of qemu.h; so include them only at the bottom of qemu.h, not the top. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-09linux-user: Change thread_env to CPUStateAndreas Färber1-1/+1
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell1-0/+1
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-06linux-user: Restore cast to target type in get_user()Peter Maydell1-2/+2
Commit 658f2dc97 accidentally dropped the cast to the target type of the value loaded by get_user(). The most visible effect of this would be that the sequence "uint64_t v; get_user_u32(v, addr)" would sign extend the 32 bit loaded value into v rather than zero extending as would be expected for a _u32 accessor. Put the cast back again to restore the old behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-12linux-user: Rewrite __get_user/__put_user with __builtin_choose_exprRichard Henderson1-30/+33
The previous formuation with multiple assignments to __typeof(*hptr) falls down when hptr is qualified const. E.g. with const struct S *p, p->f is also qualified const. With this formulation, there's no assignment to any local variable. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-06user: Rename qemu-types.h to qemu-user-types.hEduardo Habkost1-1/+1
The header file is specific for *-user, but I plan to introduce a more generic qemu-types.h file, so I'm renaming it. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-12linux-user: Fix siginfo handlingRichard Henderson1-0/+3
Compare signal numbers in the proper domain. Convert all of the fields for SIGIO and SIGCHLD. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-09-21linux-user: Use memcpy in get_user/put_user.Richard Henderson1-32/+15
When host and target have differing alignment rules, using a cast and direct memory operation can result in SIGBUS. Use memcpy instead, which the compiler will happily optimize when alignment is satisfied. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-14linux-user: Use init_guest_space when -R and -B are specifiedMeador Inge1-6/+0
Roll the code used to initialize the guest memory space when -R or -B is used into 'init_guest_space' and then call 'init_guest_space' from the driver. This way the reserved guest memory space can be probed for. Calling 'mmap' just once as is currently done is not guaranteed to succeed since the host address space validation might fail. Signed-off-by: Meador Inge <meadori@codesourcery.com> [PMM: Fixed minor whitespace errors.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-14linux-user: Factor out guest space probing into a functionMeador Inge1-0/+13
Signed-off-by: Meador Inge <meadori@codesourcery.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-06Userspace ARM BE8 supportPaul Brook1-0/+1
Add support for ARM BE8 userspace binaries. i.e. big-endian data and little-endian code. In principle LE8 mode is also possible, but AFAIK has never actually been implemented/used. System emulation doesn't have any useable big-endian board models, but should in principle work once you fix that. Dynamic endianness switching requires messing with data accesses, preferably with TCG cooperation, and is orthogonal to BE8 support. Signed-off-by: Paul Brook <paul@codesourcery.com> [PMM: various changes, mostly as per my suggestions in code review: * rebase * use EF_ defines rather than hardcoded constants * make bswap_code a bool for future VMSTATE macro compatibility * update comment in cpu.h about TB flags bit field usage * factor out load-code-and-swap into arm_ld*_code functions and get_user_code* macros * fix stray trailing space at end of line * added braces in disas.c to satisfy checkpatch ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-04-06linux-user: resolve reserved_va vma downwardsPeter Maydell1-0/+1
After consulting with Paul Brook, we concluded that it's best to search the VMA space downwards, so that we don't even get the chance to conflict with the brk range. This patch resolves a bunch of allocation conflicts when using -R. Signed-off-by: Alexander Graf <agraf@suse.de> [minor changes to get it to apply -- PMM] Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber1-7/+7
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-02linux-user: save auxv lengthAlexander Graf1-0/+1
We create our own AUXV segment on stack and save a pointer to it. However we don't save the length of it, so any code that wants to do anything useful with it later on has to walk it again. Instead, let's remember the length of our AUXV segment. This simplifies later uses by a lot. (edited by Riku to apply to qemu HEAD) Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2012-02-02linux-user: stack_base is now mandatory on all targetsRiku Voipio1-1/+1
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-09-09linux-user: Implement new ARM 64 bit cmpxchg kernel helperDr. David Alan Gilbert1-0/+6
linux-user: Implement new ARM 64 bit cmpxchg kernel helper Linux 3.1 will have a new kernel-page helper for ARM implementing 64 bit cmpxchg. Implement this helper in QEMU linux-user mode: * Provide kernel helper emulation for 64bit cmpxchg * Allow guest to object to guest offset to ensure it can map a page * Populate page with kernel helper version Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
2011-06-21linux-user: Bump do_syscall() up to 8 syscall argumentsPeter Maydell1-1/+2
On 32 bit MIPS a few syscalls have 7 arguments, and so to call them via NR_syscall the guest needs to be able to pass 8 arguments to do_syscall(). Raise the number of arguments do_syscall() takes accordingly. This fixes some gcc 4.6 compiler warnings about arg7 and arg8 variables being set and never used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>