aboutsummaryrefslogtreecommitdiff
path: root/linux-user/mips
AgeCommit message (Collapse)AuthorFilesLines
2018-11-12linux-user: Don't call gdb_handlesig() before queue_signal()Peter Maydell1-12/+4
The CPU main-loop routines for linux-user generally call gdb_handlesig() when they're about to queue a SIGTRAP signal. This is wrong, because queue_signal() will cause us to pend a signal, and process_pending_signals() will then call gdb_handlesig() itself. So the effect is that we notify gdb of the SIGTRAP, and then if gdb says "OK, continue with signal X" we will incorrectly notify gdb of the signal X as well. We don't do this double-notify for anything else, only SIGTRAP. Remove this unnecessary and incorrect code from all the targets except for nios2 (whose main loop is doing something different and broken, and will be handled in a separate patch). This bug only manifests if the user responds to the reported SIGTRAP using "signal SIGFOO" rather than "continue"; since the latter is the overwhelmingly common thing to do after a breakpoint most people won't have hit this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-29linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementationsStefan Markovic1-0/+2
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-10-29linux-user: Determine the desired FPU mode from MIPS.abiflagsStefan Markovic1-0/+75
Floating-point mode is calculated from MIPS.abiflags FP ABI value (based on kernel implementation). Illegal combinations are rejected. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-10-24linux-user/mips: Recognize the R5900 CPU modelFredrik Noring1-0/+3
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU. The R5900 FPU hardware is noncompliant and it is therefore emulated in software by the Linux kernel. QEMU emulates a compliant FPU accordingly. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18linux-user: Add MIPS-specific prctl() optionsStefan Markovic1-0/+4
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and TARGET_PR_SET_FP_MODE. These values are essentially copied from linux kernel header include/uapi/linux/prctl.h. This is done in a way consistent with a similar case of aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and TARGET_PR_SVE_GET_VL. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-08-24elf: Don't check FCR31_NAN2008 bit for nanoMIPSAleksandar Markovic1-0/+3
nanoMIPS is always NaN2008 compliant, and rules for checking FCR31's NAN2008 bit are obsoleted. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-24target/mips: Implement emulation of nanoMIPS LLWP/SCWP pairAleksandar Rikalo1-5/+20
Implement support for nanoMIPS LLWP/SCWP instructions. Beside adding core functionality of these instructions, this patch adds support for availability control via configuration bit XNP. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-08-16linux-user: Update MIPS syscall numbers up to kernel 4.18 headersAleksandar Markovic1-0/+9
Synchronize content of linux-user/mips/syscall_nr.h and linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers. This adds 9 new syscall numbers, the last being NR_io_pgetevents. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
2018-06-04linux-user: move mips signal definitions to mips/target_signal.hLaurent Vivier1-0/+50
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-12-laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier3-8/+4
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-06-04linux-user: move mips/mips64 fcntl definitions to mips/target_fcntl.hLaurent Vivier1-0/+27
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-6-laurent@vivier.eu>
2018-06-04linux-user: move generic fcntl definitions to generic/fcntl.hLaurent Vivier1-0/+11
add a per target target_fcntl.h and include the generic one from them No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
2018-05-25linux-user: define TARGET_SO_REUSEPORTLaurent Vivier1-3/+0
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180519092956.15134-9-laurent@vivier.eu>
2018-05-25linux-user: update ARCH_HAS_SOCKET_TYPES useLaurent Vivier1-3/+6
to be like in the kernel and rename it TARGET_ARCH_HAS_SOCKET_TYPES Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180519092956.15134-7-laurent@vivier.eu>
2018-05-25linux-user: move mips socket.h definitions to mips/sockbits.hLaurent Vivier1-0/+110
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180519092956.15134-2-laurent@vivier.eu>
2018-05-03linux-user: introduce target_sigsp() and target_save_altstack()Laurent Vivier1-13/+2
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411192347.30228-1-laurent@vivier.eu>
2018-04-30linux-user: move mips/mips64 cpu loop to mips directoryLaurent Vivier1-0/+723
No code change, only move code from main.c to mips/cpu_loop.c. Include mips/cpu_loop.c in mips64/cpu_loop.c to avoid to duplicate code. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180411185651.21351-8-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier1-0/+26
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
2018-04-30linux-user: define TARGET_ARCH_HAS_SETUP_FRAMELaurent Vivier1-6/+2
Instead of calling setup_frame() conditionally to a list of known targets, define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function and call it only if the macro is defined. Move declarations of setup_frame() and setup_rt_frame() to linux-user/signal-common.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
2018-04-30linux-user: move mips/mips64 signal.c parts to mips directoryLaurent Vivier2-1/+390
No code change, only move code from signal.c to mips/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). mips64/signal.c includes mips/signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-19-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier1-0/+18
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
2018-02-25linux-user: MIPS set cpu to r6 CPU if binary is R6YunQiang Su1-0/+3
So here we need to detect the version of binaries and set cpu_model for it. Signed-off-by: YunQiang Su <syq@debian.org> [lv: original patch modified to move code into cpu_get_model()] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier1-0/+14
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2018-02-18linux-user: Implement ioctl cmd TIOCGPTPEERAndreas Schwab1-0/+1
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmbmhdosb9.fsf_-_@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-01-22linux-user: Handle ERFKILL and EHWPOISONRichard Henderson1-0/+5
With definitions for generic, alpha and mips taken from 4.9-rc2. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-21linux-user: Fix fadvise64() syscall support for Mips32Aleksandar Markovic1-1/+1
By looking at the file arch/mips/kernel/scall32-o32.S in Linux kernel, it can be deduced that, for Mips32 platform, syscall corresponding to number _NR_fadvise64 as defined in kernel file arch/mips/include/uapi/asm/unistd.h translates to kernel function sys_fadvise64_64, and that argument layout for this system call is as follows: 0 32 0 32 +----------------+----------------+ (arg1) | fd | __pad | (arg2) +----------------+----------------+ (arg3) | buffer | (arg4) +----------------+----------------+ (arg5) | len | (arg6) +----------------+----------------+ (arg7) | advise | not used | (arg8) +----------------+----------------+ The same argument layout can be deduced from glibc code, and relevant commit messages in linux kernel and glibc. The fix is to change TARGET_NR_fadvise64 to TARGET_NR_fadvise64_64 in Mips32 syscall numbers table. Array mips_syscall_args[] in linux-user/main.c also already have "fadvise64_64" (and not "fadvise64") in corresponding place for the syscall number in question, so no change for linux-user/main.c. This patch also fixes the failure LTP test posix_fadvise03, if executed on Qemu-emulated Mips32 platform (user mode). Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com> Signed-off-by: Miroslav Tisma <miroslav.tisma@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21linux-user: Update ioctls definitions for Mips32Aleksandar Markovic1-0/+12
Update linux-user/mips/termbits.h with ioctl definitions from kernel file arch/mips/include/uapi/asm/ioctls.h. Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-23linux-user: Add missing TARGET_EDQUOT error code for MipsAleksandar Markovic1-0/+2
EDQUOT is defined for Mips platform in Linux kernel in such a way that it has different value than on most other platforms. However, correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover, TARGET_EDQUOT is missing from the table for conversion of error codes from host to target. This patch fixes these problems. Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(), open(), rename(), request_key(), setxattr(), symlink(), and write() will not be able to return the right error code in some scenarios on Mips platform. (Some of these syscalls are not yet supported in Qemu, but once they are supported, they will need correct EDQUOT handling.) Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23linux-user: Fix structure target_semid64_ds definition for MipsAleksandar Markovic1-0/+16
This patch corrects target_semid64_ds structure definition for Mips. See, for example definition of semid64_ds for Mips in Linux kernel: arch/mips/include/uapi/asm/sembuf.h#L13. This patch will also fix certain semaphore-related LTP tests for Mips, if they are executed in Qemu user mode for any Mips platform. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Acked-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-21linux-user: Use correct target SHMLBA in shmat()Peter Maydell1-0/+7
The shmat() handling needs to do target-specific handling of the attach address for shmat(): * if the SHM_RND flag is passed, the address is rounded down to a SHMLBA boundary * if SHM_RND is not passed, then the call is failed EINVAL if the address is not a multiple of SHMLBA Since SHMLBA is target-specific, we need to do this checking and rounding in QEMU and can't leave it up to the host syscall. Allow targets to define TARGET_FORCE_SHMLBA and provide a target_shmlba() function if appropriate, and update do_shmat() to honour them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-12linux-user: Clean up target_structs.h header guardsMarkus Armbruster1-2/+2
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster1-3/+3
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_cpu.h header guardsMarkus Armbruster1-2/+2
These headers all use TARGET_CPU_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_CPU_H for linux-user/$target/target_cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster1-3/+3
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-27linux-user: Support for restarting system calls for MIPS targetsTimothy E Baldwin1-0/+1
Update the MIPS main loop code: * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn (We already handle TARGET_QEMU_ESIGRETURN.) Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-7-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27linux-user: Renumber TARGET_QEMU_ESIGRETURN, make it not arch-specificTimothy E Baldwin1-4/+0
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN only on the MIPS and PPC targets; move this to errno_defs.h so it is available for all architectures, and renumber it to 513. We pick 513 because this is safe from future use as a system call return value: Linux uses it as ERESTART_NOINTR internally and never allows that errno to escape to userspace. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova1-0/+4
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11Add missing syscall nrs. according to more recent Linux kernelsJohan Ouwerkerk1-0/+12
This change covers arm, aarch64, mips. Others to follow? The change was prompted by QEMU warning about a syscall 384 (get_random()) with Debian armhf binaries (ARMv7). Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta1-0/+2
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2Tom Musta1-0/+1
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was 2048 previously. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-18target-mips: implement UserLocal RegisterPetar Jovanovic1-1/+1
From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-03-10linux-user: set minimum kernel version to 2.6.32Riku Voipio1-0/+1
Popular glibc based distributions[1] require minimum 2.6.32 as kernel version. For some targets 2.6.18 would be enough, but dropping so low would mean some suboptimal system calls could get used. Set the minimum kernel advertized to 2.6.32 for all architectures but aarch64 to ensure working qemu linux-user in case host kernel is older. [1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078 Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-18linux-user: sync syscall numbers upto 3.13Riku Voipio1-0/+6
All others updated except unicore, which doesn't look right to begin with. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29linux-user: create target_structs header to place ipc_perm and shmid_dsPetar Jovanovic1-0/+48
Creating target_structs header in linux-user/$arch/ and making target_ipc_perm and target_shmid_ds its first inhabitants. The struct defintions may/should be further fine-tuned by arch maintainers. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell1-0/+2
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell1-0/+36
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2011-07-11linux-user: Add syscall numbers from kernel 2.6.39.2Peter Maydell1-0/+13
Add syscall numbers for new syscall numbers; this brings us into line with Linux 2.6.39.2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2010-12-03linux-user: fix mips and ppc to use UID16Martin Mohring1-19/+19
Signed-off-by: Martin Mohring <martin.mohring@5edatasoft.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-1/+1
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-1/+1
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
generated by cgit v1.1 at 2024-12-29 11:43:56 +0000