aboutsummaryrefslogtreecommitdiff
path: root/linux-user/microblaze
AgeCommit message (Collapse)AuthorFilesLines
2020-10-26linux-user: update syscall.tbl to Linux 5.9-rc7Laurent Vivier1-1/+3
Updated running scripts/update-syscalltbl.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200930003033.554124-4-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-14linux-user/microblaze: Remove non-rt signal framesRichard Henderson2-96/+2
The microblaze kernel does not support these, and uses only rt style signal frames. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-10-14linux-user/microblaze: Implement rt signal framesRichard Henderson1-9/+82
Allows microblaze to pass tests/tcg/multiarch/linux-test.c. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-01target/microblaze: Convert brk and brki to decodetreeRichard Henderson1-1/+1
Split these out of the normal branch instructions, as they require special handling. Perform the entire operation inline, instead of raising EXCP_BREAK to do the work in mb_cpu_do_interrupt. This fixes a bug in that brki rd, imm, for imm != 0x18 is not supposed to set MSR_BIP. This fixes a bug in that imm == 0 is the reset vector and 0x18 is the debug vector, and neither should raise a tcg exception in system mode. Introduce EXCP_SYSCALL for microblaze-linux-user. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-01target/microblaze: Fix width of ESRRichard Henderson1-1/+1
The exception status register is only 32-bits wide. Do not use a 64-bit type to represent it. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-01target/microblaze: Split out FSR from env->sregsRichard Henderson1-2/+2
Continue eliminating the sregs array in favor of individual members. Does not correct the width of FSR, yet. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-01target/microblaze: Split out ESR from env->sregsRichard Henderson1-3/+3
Continue eliminating the sregs array in favor of individual members. Does not correct the width of ESR, yet. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-01target/microblaze: Split out PC from env->sregsRichard Henderson2-10/+10
Begin eliminating the sregs array in favor of individual members. Does not correct the width of pc, yet. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-08-27linux-user: Add generic 'termbits.h' for some archsFilip Bozuta1-219/+1
This patch introduces a generic 'termbits.h' file for following archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2', 'openrisc', 'riscv', 's390x', 'x86_64'. Since all of these archs have the same termios flag values and same ioctl_tty numbers, there is no need for a separate 'termbits.h' file for each one of them. For that reason one generic 'termbits.h' file was added for all of them and an '#include' directive was added for this generic file in every arch 'termbits.h' file. Also, some of the flag values that were missing were added in this generic file so that it matches the generic 'termibts.h' and 'ioctls.h' files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add strace support for printing arguments of syscalls used to ↵Filip Bozuta1-2/+3
lock and unlock memory This patch implements strace argument printing functionality for following syscalls: * mlock, munlock, mlockall, munlockall - lock and unlock memory int mlock(const void *addr, size_t len) int munlock(const void *addr, size_t len) int mlockall(int flags) int munlockall(void) man page: https://man7.org/linux/man-pages/man2/mlock.2.html Implementation notes: Syscall mlockall() takes an argument that is composed of predefined values which represent flags that determine the type of locking operation that is to be performed. For that reason, a printing function "print_mlockall" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print the "flags" argument. These flags are stated inside an array "mlockall_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_TARGET()" that crates aproppriate target flag values based on those defined in files '/target_syscall.h'. These target flag values were changed from "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT" was added in this patch. This value was also added in "syscall.c" in function "target_to_host_mlockall_arg()". Because this flag value was added in kernel version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and in "strace.c") as to support older kernel versions. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Syscall mlock2() is not implemented in "syscall.c" and thus it's argument printing is not implemented in this patch. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: linux-userMarc-André Lureau2-5/+5
The most interesting or most complicated part here is the syscall_nr.h generators. In order to keep the generation logic all in meson.build, I am adding to config_target the name of the .tbl file, and making the generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl. For architectures where the input file is not named syscall_nr.tbl, syscall_nr.h has to be a source file; it's just a forwarder for x86 (i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-20linux-user: update syscall.tbl from linux 0bf999f9c5e7Laurent Vivier1-0/+2
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20200310103403.3284090-20-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-20linux-user, microblaze: add syscall table generation supportLaurent Vivier4-442/+480
Copy syscall.tbl and syscallhdr.sh from linux/arch/microblaze/kernel/syscalls v5.5 Update syscallhdr.sh to generate QEMU syscall_nr.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20200310103403.3284090-8-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-17linux-user: microblaze: Update syscall numbers to kernel 5.5 levelAleksandar Markovic1-0/+45
Update microblaze syscall numbers based on Linux kernel v5.5. CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1581596954-2305-5-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user: Introduce cpu_clone_regs_parentRichard Henderson1-0/+4
We will need a target-specific hook for adjusting registers in the parent during clone. Add an empty inline function for each target, and invoke it from the proper places. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user: Rename cpu_clone_regs to cpu_clone_regs_childRichard Henderson1-1/+2
We will need a target-specific hook for adjusting registers in the parent during clone. To avoid confusion, rename the one we have to make it clear it affects the child. At the same time, pass in the flags from the clone syscall. We will need them for correct behaviour for Sparc. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-12Supply missing header guardsMarkus Armbruster2-0/+10
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-0/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10target/microblaze: Use env_cpu, env_archcpuRichard Henderson1-1/+1
Cleanup in the boilerplate that each target must define. Replace mb_env_get_cpu with env_archcpu. The combination CPU(mb_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Move cpu_mmu_index below the include of "exec/cpu-all.h", so that the definition of env_archcpu is available. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster1-2/+2
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2018-11-12linux-user: Don't call gdb_handlesig() before queue_signal()Peter Maydell1-12/+4
The CPU main-loop routines for linux-user generally call gdb_handlesig() when they're about to queue a SIGTRAP signal. This is wrong, because queue_signal() will cause us to pend a signal, and process_pending_signals() will then call gdb_handlesig() itself. So the effect is that we notify gdb of the SIGTRAP, and then if gdb says "OK, continue with signal X" we will incorrectly notify gdb of the signal X as well. We don't do this double-notify for anything else, only SIGTRAP. Remove this unnecessary and incorrect code from all the targets except for nios2 (whose main loop is doing something different and broken, and will be handled in a separate patch). This bug only manifests if the user responds to the reported SIGTRAP using "signal SIGFOO" rather than "continue"; since the latter is the overwhelmingly common thing to do after a breakpoint most people won't have hit this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Report error message on stderr, rather than stdoutPhilippe Mathieu-Daudé1-3/+3
Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/(\s+)printf\s*\(("Unhandled.*)\);/\1fprintf(stderr, \2);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180706155127.7483-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Do not report "syscall not implemented" by defaultPhilippe Mathieu-Daudé1-2/+2
This can still be reported using the "-d unimp" command line option. Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180706155127.7483-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-06-11linux-user/microblaze: Fix typo in accept4 syscallRichard Henderson1-1/+1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180607184844.30126-4-richard.henderson@linaro.org> [lv: replace tabs by spaces] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-06-04linux-user: move generic signal definitions to generic/signal.hLaurent Vivier1-0/+2
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-10-laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier3-8/+4
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-06-04linux-user: move generic fcntl definitions to generic/fcntl.hLaurent Vivier1-0/+11
add a per target target_fcntl.h and include the generic one from them No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
2018-05-29target-microblaze: Make special registers 64-bitEdgar E. Iglesias1-2/+2
Extend special registers to 64-bits. This is in preparation for MFSE/MTSE, moves to and from extended special registers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-05-25linux-user: move socket.h generic definitions to generic/sockbits.hLaurent Vivier1-0/+1
and include the file from architectures without specific definitions Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
2018-05-03linux-user: introduce target_sigsp() and target_save_altstack()Laurent Vivier1-3/+1
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411192347.30228-1-laurent@vivier.eu>
2018-04-30linux-user: move microblaze cpu loop to microblaze directoryLaurent Vivier1-0/+150
No code change, only move code from main.c to microblaze/cpu_loop.c. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180411185651.21351-13-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier1-0/+26
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
2018-04-30linux-user: define TARGET_ARCH_HAS_SETUP_FRAMELaurent Vivier1-5/+1
Instead of calling setup_frame() conditionally to a list of known targets, define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function and call it only if the macro is defined. Move declarations of setup_frame() and setup_rt_frame() to linux-user/signal-common.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
2018-04-30linux-user: move microblaze signal.c parts to microblaze directoryLaurent Vivier2-1/+235
No code change, only move code from signal.c to microblaze/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-6-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier1-0/+18
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
2018-04-10linux-user: fix microblaze get_sp_from_cpustate()Laurent Vivier1-1/+1
get_sigframe() uses regs[1] and this is actual SP. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180409115212.875-1-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier1-0/+14
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2018-02-18linux-user: Implement ioctl cmd TIOCGPTPEERAndreas Schwab1-0/+1
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmbmhdosb9.fsf_-_@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-09-22linux-user: fix TARGET_NR_selectLaurent Vivier1-0/+2
TARGET_NR_select can have three different implementations: 1- to always return -ENOSYS microblaze, ppc, ppc64 -> TARGET_WANT_NI_OLD_SELECT 2- to take parameters from a structure pointed by arg1 (kernel sys_old_select) i386, arm, m68k -> TARGET_WANT_OLD_SYS_SELECT 3- to take parameters from arg[1-5] (kernel sys_select) x86_64, alpha, s390x, cris, sparc, sparc64 Some (new) architectures don't define NR_select, 4- but only NR__newselect with sys_select: mips, mips64, sh 5- don't define NR__newselect, and use pselect6 syscall: aarch64, openrisc, tilegx, unicore32 Reported-by: Timothy Pearson <tpearson@raptorengineering.com> Reported-by: Allan Wirth <awirth@akamai.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-12linux-user: Clean up target_structs.h header guardsMarkus Armbruster1-2/+2
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster1-3/+3
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_cpu.h header guardsMarkus Armbruster1-2/+2
These headers all use TARGET_CPU_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_CPU_H for linux-user/$target/target_cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster1-2/+2
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-27linux-user: Support for restarting system calls for Microblaze targetsTimothy E Baldwin1-0/+1
Update the Microblaze main loop and sigreturn code: * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn * set all guest CPU state within signal.c code on sigreturn * handle TARGET_QEMU_ESIGRETURN in the main loop as the indication that the main loop should not touch any guest CPU state Note that this in passing fixes a bug where we were corrupting the guest r[3] on sigreturn with the guest's r[10] because do_sigreturn() was returning env->regs[10] but the register for syscall return values is env->regs[3]. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define; drop whitespace changes] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23linux-user: sync syscall numbers with kernelRiku Voipio1-0/+8
Sync syscall numbers to match the linux v4.5-rc1 kernel. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova1-0/+0
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta1-0/+2
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2Tom Musta1-0/+1
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was 2048 previously. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-10linux-user: set minimum kernel version to 2.6.32Riku Voipio1-1/+1
Popular glibc based distributions[1] require minimum 2.6.32 as kernel version. For some targets 2.6.18 would be enough, but dropping so low would mean some suboptimal system calls could get used. Set the minimum kernel advertized to 2.6.32 for all architectures but aarch64 to ensure working qemu linux-user in case host kernel is older. [1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078 Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-18linux-user: sync syscall numbers upto 3.13Riku Voipio1-1/+6
All others updated except unicore, which doesn't look right to begin with. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.1 at 2025-01-02 16:54:08 +0000