aboutsummaryrefslogtreecommitdiff
path: root/linux-user/m68k/cpu_loop.c
AgeCommit message (Collapse)AuthorFilesLines
2022-06-28target/m68k: Make semihosting system onlyRichard Henderson1-5/+0
While we had a call to do_m68k_semihosting in linux-user, it wasn't actually reachable. We don't include DISAS_INSN(halt) as an instruction unless system mode. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-02target/m68k: Implement TRAPccRichard Henderson1-0/+1
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/754 Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220602013401.303699-11-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-02target/m68k: Fix address argument for EXCP_TRACERichard Henderson1-0/+3
According to the M68040 Users Manual, section 8.4.3, Six word stack frame (format 2), Trace (and others) is supposed to record the next insn in PC and the address of the trapping instruction in ADDRESS. Create gen_raise_exception_format2 to record the trapping pc in env->mmu.ar. Update m68k_interrupt_all to pass the value to do_stack_frame. Update cpu_loop to handle EXCP_TRACE. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220602013401.303699-9-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-02target/m68k: Fix pc, c flag, and address argument for EXCP_DIV0Richard Henderson1-1/+1
According to the M68040 Users Manual, section 8.4.3, Six word stack frame (format 2), Zero Div (and others) is supposed to record the next insn in PC and the address of the trapping instruction in ADDRESS. While the N, Z and V flags are documented to be undefine on DIV0, the C flag is documented as always cleared. Update helper_div* to take the instruction length as an argument and use raise_exception_format2. Hoist the reset of the C flag above the division by zero check. Update m68k_interrupt_all to pass mmu.ar to do_stack_frame. Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the kernel does in trap_c(). Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220602013401.303699-8-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-02target/m68k: Fix address argument for EXCP_CHKRichard Henderson1-1/+1
According to the M68040 Users Manual, section 8.4.3, Six word stack frame (format 2), CHK, CHK2 (and others) are supposed to record the next insn in PC and the address of the trapping instruction in ADDRESS. Create a raise_exception_format2 function to centralize recording of the trapping pc in mmu.ar, plus advancing to the next insn. Update m68k_interrupt_all to pass mmu.ar to do_stack_frame. Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the kernel does in trap_c(). Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220602013401.303699-7-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-02linux-user/m68k: Handle EXCP_TRAP1 through EXCP_TRAP15Richard Henderson1-0/+4
These are raised by guest instructions, and should not fall through into the default abort case. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220602013401.303699-5-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-02target/m68k: Raise the TRAPn exception with the correct pcRichard Henderson1-1/+0
Rather than adjust the PC in all of the consumers, raise the exception with the correct PC in the first place. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220602013401.303699-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-11linux-user/m68k: Use force_sig_faultRichard Henderson1-20/+4
Use the new function instead of setting up a target_siginfo_t and calling queue_signal. Fill in the missing PC for SIGTRAP. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-12-19linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURNRichard Henderson1-1/+1
This value is fully internal to qemu, and so is not a TARGET define. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYSRichard Henderson1-1/+1
This value is fully internal to qemu, and so is not a TARGET define. We use this as an extra marker for both host and target errno. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02target/m68k: Make m68k_cpu_tlb_fill sysemu onlyRichard Henderson1-10/+0
The fallback code in cpu_loop_exit_sigsegv is sufficient for m68k linux-user. Remove the code from cpu_loop that handled EXCP_ACCESS. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell1-0/+1
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split signal-related prototypes into signal-common.hPeter Maydell1-0/+1
Split the signal related prototypes into the existing header file signal-common.h, and include it in those places that now require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-26linux-user/m68k: remove simulator syscall interfaceLaurent Vivier1-16/+1
This interface has been introduced in 2005 with the coldfire implementation (e6e5906b6e ColdFire target.) and looks like to do what the linux-user interface already does with the TRAP exception rather than the ILLEGAL exception. This interface has not been maintained since that. The semi-hosting interface is not removed so coldfire kernel with semi-hosting is always supported. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20190524162049.806-1-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-0/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10target/m68k: Use env_cpuRichard Henderson1-1/+1
Cleanup in the boilerplate that each target must define. The combination CPU(m68k_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Acked-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson1-1/+1
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-11-12linux-user: Don't call gdb_handlesig() before queue_signal()Peter Maydell1-12/+4
The CPU main-loop routines for linux-user generally call gdb_handlesig() when they're about to queue a SIGTRAP signal. This is wrong, because queue_signal() will cause us to pend a signal, and process_pending_signals() will then call gdb_handlesig() itself. So the effect is that we notify gdb of the SIGTRAP, and then if gdb says "OK, continue with signal X" we will incorrectly notify gdb of the signal X as well. We don't do this double-notify for anything else, only SIGTRAP. Remove this unnecessary and incorrect code from all the targets except for nios2 (whose main loop is doing something different and broken, and will be handled in a separate patch). This bug only manifests if the user responds to the reported SIGTRAP using "signal SIGFOO" rather than "continue"; since the latter is the overwhelmingly common thing to do after a breakpoint most people won't have hit this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-11-01target/m68k: use EXCP_ILLEGAL instead of EXCP_UNSUPPORTEDLaurent Vivier1-1/+0
Coldfire defines an "Unsupported instruction" exception if execution of a valid instruction is attempted but the required hardware is not present in the processor. We use it with instructions that are in fact undefined or illegal, and the exception expected in this case by the kernel is the illegal exception, so this patch fixes that. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181030165554.5761-1-laurent@vivier.eu>
2018-04-30linux-user: move m68k cpu loop to m68k directoryLaurent Vivier1-0/+144
No code change, only move code from main.c to m68k/cpu_loop.c. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-14-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier1-0/+26
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
generated by cgit v1.1 at 2025-01-05 01:16:52 +0000