aboutsummaryrefslogtreecommitdiff
path: root/linux-user/hexagon
AgeCommit message (Collapse)AuthorFilesLines
2023-01-05linux-user/hexagon: fix signal context save & restoreMukilan Thiyagarajan1-6/+11
This patch fixes the issue originally reported in this thread: https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html The root cause of the issue is a bug in the hexagon specific logic for saving & restoring context during signal delivery. The CPU state has two different representations for the predicate registers. The current logic saves & restores only the aliased HEX_REG_P3_O register, which is part of env->gpr[] field in the CPU state, but not the individual byte-level predicate registers (pO, p1, p2, p3) backed by env->pred[]. Since all predicated instructions refer only to the indiviual registers, switching to and back from a signal handler can clobber these registers if the signal handler writes to them causing the normal application code to behave unpredictably when context is restored. In the reported issue with the 'signals' test, since the updated hexagon toolchain had built musl with -O2, the functions called from non_trivial_free were inlined. This meant that the code emitted reused predicate P0 computed in the entry translation block of the function non_trivial_free in one of the child TB as part of an assertion. Since P0 is clobbered by the signal handler in the signals test, the assertion in non_trivial_free fails incorectly. Since musl for hexagon implements the 'abort' function by deliberately writing to memory via null pointer, this causes the test to fail with segmentation fault. This patch modifies the signal context save & restore logic to include the individual p0, p1, p2, p3 and excludes the 32b p3_0 register since its value is derived from the former registers. It also adds a new test case that reliabily reproduces the issue for all four predicate registers. Buglink: https://github.com/quic/toolchain_for_hexagon/issues/6 Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20221229092006.10709-2-quic_mthiyaga@quicinc.com>
2022-09-27linux-user: Provide MADV_* definitionsIlya Leoshkevich1-0/+1
Provide MADV_* definitions using target_mman.h header, similar to what kernel does. Most architectures use the same values, with the exception of alpha and hppa. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-05-11Clean up decorations and whitespace around header guardsMarkus Armbruster1-1/+1
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220506134911.2856099-5-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.hSerge Belyshev1-0/+1
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11linux-user: Move target_struct.h generic definitions to generic/Richard Henderson1-54/+1
Most targets share the same generic ipc structure definitions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220107042600.149852-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Split out do_prctl and subroutinesRichard Henderson1-0/+1
Since the prctl constants are supposed to be generic, supply any that are not provided by the host. Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE, PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL, PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do not support these options rather than pass them on to the host. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Move target_signal.h generic definitions to generic/signal.hSong Gao1-11/+0
No code change Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-2-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-12-19linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURNRichard Henderson2-2/+2
This value is fully internal to qemu, and so is not a TARGET define. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYSRichard Henderson1-1/+1
This value is fully internal to qemu, and so is not a TARGET define. We use this as an extra marker for both host and target errno. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-15target/hexagon/cpu.h: don't include qemu-common.hPeter Maydell1-0/+1
The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org
2021-11-02target/hexagon: Remove hexagon_cpu_tlb_fillRichard Henderson1-23/+1
The fallback code in cpu_loop_exit_sigsegv is sufficient for hexagon linux-user. Remove the code from cpu_loop that raises SIGSEGV. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-01linux-user/hexagon: Implement setup_sigtrampRichard Henderson2-2/+19
Continue to initialize the words on the stack, as documented. However, use the off-stack trampoline. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210929130553.121567-9-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell2-0/+2
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split signal-related prototypes into signal-common.hPeter Maydell1-0/+1
Split the signal related prototypes into the existing header file signal-common.h, and include it in those places that now require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13linux-user: update syscall_nr.h to Linux v5.13Laurent Vivier1-1/+11
Automatically generated using scripts/gensyscalls.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20210708215756.268805-2-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Extract target errno to 'target_errno_defs.h'Philippe Mathieu-Daudé1-0/+7
We want to access the target errno indepently of the rest of the linux-user code. Move the header containing the generic errno definitions ('errno_defs.h') to 'generic/target_errno_defs.h', create a new 'target_errno_defs.h' in each target which itself includes 'generic/target_errno_defs.h'. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user: Pass CPUArchState to target_restore_altstackRichard Henderson1-1/+1
In most cases we were already passing get_sp_from_cpustate directly to the function. In other cases, we were passing a local variable which already contained the same value. In the rest of the cases, we were passing the stack pointer out of env directly. Reviewed by: Warner Losh <imp@bsdimp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user: Use target_restore_altstack in all sigreturnRichard Henderson1-5/+1
Note that target_restore_altstack uses the host memory pointer that we have already verified, so TARGET_EFAULT is not a possible return value. Note that using -EFAULT was a bug. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-01Hexagon (target/hexagon) use env_archcpu and env_cpuTaylor Simpson1-1/+1
Remove hexagon_env_get_cpu and replace with env_archcpu Replace CPU(hexagon_env_get_cpu(env)) with env_cpu(env) Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1617930474-31979-5-git-send-email-tsimpson@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-18Hexagon (linux-user/hexagon) Linux user emulationTaylor Simpson11-0/+960
Implementation of Linux user emulation for Hexagon Some common files modified in addition to new files in linux-user/hexagon Acked-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1612763186-18161-31-git-send-email-tsimpson@quicinc.com> [rth: Fix termbits.h on review by Laurent] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2025-02-15 12:12:23 +0000