aboutsummaryrefslogtreecommitdiff
path: root/libcacard
AgeCommit message (Collapse)AuthorFilesLines
2012-02-09make: Remove duplicate use of GLIB_CFLAGSStefan Weil1-2/+0
Makefile, Makefile.hw, Makefile.target and libcacard/Makefile added GLIB_CFLAGS to QEMU_CFLAGS. Makefile.objs does this, too, and is included by all other Makefiles, so GLIB_CFLAGS were added twice (reported by malc). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: malc <av1474@comtv.ru>
2011-12-02fix spelling in libcacard sub directoryDong Xu Wang4-5/+5
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-25libcacard: Fix wrong assertion (reported by cppcheck)Stefan Weil1-1/+1
assert("...") will never do anything. This assertion handles a case which should never occur, so it must be assert(!"..."). Cc: Alon Levy <alevy@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2011-10-25libcacard/vscclient: fix error paths for socket creationAlon Levy1-2/+7
Signed-off-by: Alon Levy <alevy@redhat.com>
2011-10-25libcacard/cac: fix typo in cac_delete_pki_applet_privateAlon Levy1-1/+2
Signed-off-by: Alon Levy <alevy@redhat.com>
2011-09-21Silence make if nothing is to do for libcacardJan Kiszka1-0/+2
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-02libcacard: use INSTALL_DATA for dataBrad Smith1-1/+1
Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-29Fix spelling in comments and debug messages (recieve -> receive)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-27Fix build on OpenBSD with BSD userland emu and smartcard NSS enabledBrad1-2/+2
The first issue is the hard coded POSIX Real Time extensions library in the libcacard/Makefile. From looking at the code it doesn't seem this is necessary anyway. Robert Relyea seems to think it most likely isn't necessary. The second issue was the missing exclusion of the BSD userland binary builds from the addition of this Makefile target for the smartcard NSS code which breaks the builds if smartcard NSS support is enabled. pastebin clip of the build failure.. http://pastebin.com/raw.php?i=BLCKd3s6 Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-22Improvements to libtool support.Brad1-5/+5
Improvements to the libtool support in QEMU. Replace hard coded libtool in the infrastructure with $(LIBTOOL) and allow overriding the libtool binary used via the configure script. Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22build: list libraries after objects, for proper linkageDiego Elio Pettenò1-2/+2
Without this change, when using -Wl,--as-needed with GNU linker, the libraries would be discarded. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-21Remove remenants of qemu_mallocAnthony Liguori1-1/+1
This covers the various check commands Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori7-66/+66
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Make glib mandatory and fixup utils appropriatelyAnthony Liguori1-1/+3
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-02libcacard: use INSTALL_DATA for dataAlon Levy1-3/+2
Signed-off-by: Alon Levy <alevy@redhat.com>
2011-07-26libcacard: add pc file, install it + includesAlon Levy2-3/+37
Additionally: + add --includedir configure parameters + make install-libcacard install vscclient as well
2011-07-22libcacard: replace copy_string with strndupChristophe Fergeau1-17/+6
copy_string reimplements strndup, this commit removes it and replaces all copy_string uses with strndup. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2011-07-22libcacard: introduce NEXT_TOKEN macroChristophe Fergeau1-47/+24
vcard_emul_options now has repetitive code to read the current token and advance to the next. After the previous changes, this repetitive code can be moved in a NEXT_TOKEN macro to avoid having this code duplicated. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2011-07-22libcacard: fix soft=... parsing in vcard_emul_optionsChristophe Fergeau1-17/+28
The previous parser had copy and paste errors when computing vname_length and type_params_length, "name" was used instead of respectively vname and type_params. This led to length that could be bigger than the input string, and to access out of the array bounds when trying to copy these strings. valgrind rightfully complained about this. It also didn't handle empty fields correctly, Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2011-07-22libcacard: s/strip(args++)/strip(args+1)Christophe Fergeau1-2/+2
vcard_emul_options used args = strip(args++) a few times, which was not returning the expected result since the rest of the code expected args to be increased by at least 1, which is not the case if *args is not a blank space when this function is called. Replace these calls by "strip(args+1)" which will do what we expect. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2011-07-22libcacard: don't leak vcard_emul_alloc_arrays memChristophe Fergeau1-1/+10
vcard_emul_mirror_card and vcard_emul_init use vcard_emul_alloc_arrays to allocate memory for temporary arrays which will contain elements that in the end will be used one by one in cac_card_init. The arrays themselves are never stored anywhere, they are only used as temporary containers. Hence the memory that was allocated for these arrays should be freed after use or they will be leaked.
2011-07-22libcacard/vcard_emul_nss: support cards lying about CKM_RSA_X_509 supportRobert Relyea1-6/+127
Some tokens claim to do CKM_RSA_X_509, but then choke when they try to do the actual operations. Try to detect those cases and treat them as if the token didn't claim support for X_509. Signed-off-by: Robert Relyea <rrelyea@redhat.com>
2011-06-14libcacard: add libcacard.la targetAlon Levy1-4/+28
No flag to configure is required. Instead, added a libcacard.la target that is not built by default, only when requested explicitly via: mkdir build cd build ../configure make libcacard.la make install-libcacard Uses libtool to do actual linking of object files and shared library, and installing. Tested only under linux, but supposed to work on other systems as well. If libtool isn't found you get a message complaining about that, only at build time (since it is not a default target I did not add a message at configure time). New build artifacts: .libs subdirectories (at <buildroot> and <buildroot>/libcacard) *.lo files (at same locations as the respective o files) Added %.lo : %.c rule that uses libtool. Updated clean rule to clean up those artifacts. Added specific rule to call dtrace with libtool wrapper (note that because of a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag isn't actually passed on. still current dtrace+libtool produced object links fine). If libtool is missing any of the following targets will complain and exit 1: any subdir: *.lo root and libcacard: libcacard.la, libcacard-instsall Tested to link and load with all tracing backends.
2011-05-08libcacard: add correct subdirectory dependenciesPaolo Bonzini1-8/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-trivial@nongnu.org Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-08Fix typos in comments (existance -> existence)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-08Fix typo in comment (consistant -> consistent)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-17libcacard: fix opposite usage of isspaceAlon Levy1-2/+2
Signed-off-by: Alon Levy <alevy@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01libcacard: add vscclientRobert Relyea2-1/+658
client to talk to ccid-card-passthru and use smartcard on client to perform actual operations. v23->v24 changes: (Jes Sorensen review 2) * use qemu_socket instead of socket * use fprintf(stderr,..) for errors * remove unneccessary includes since using qemu_common.h
2011-04-01libcacard: initial commitRobert Relyea20-0/+4012
libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2011-04-01introduce libcacard/vscard_common.hAlon Levy1-0/+178
--- Signed-off-by: Alon Levy <alevy@redhat.com> v20->v21 changes: (Jes Sorensen review) * license set to 2+ * long comment fixes, remove empty line at eof. * add reference to COPYING v19->v20 changes: * checkpatch.pl v15->v16 changes: Protocol change: * VSCMsgInit capabilities and magic * removed ReaderResponse, will use Error instead with code==VSC_SUCCESS. * adaded Flush and FlushComplete, remove Reconnect. * define VSCARD_MAGIC * added error code VSC_SUCCESS. Fixes: * update VSCMsgInit comment * fix message type enum * remove underscore from wrapping define * update copyright * updated comments. * Header comment updated * remove C++ style comment * fix comment for VSCMsgError * give names to enums in typedefs
generated by cgit v1.1 at 2024-12-26 13:46:28 +0000