aboutsummaryrefslogtreecommitdiff
path: root/kvm-all.c
AgeCommit message (Collapse)AuthorFilesLines
2015-02-10kvm: g_malloc() can't fail, bury dead error handlingMarkus Armbruster1-4/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-01-12kvm: extend kvm_irqchip_add_msi_route to work on s390Frank Blaschka1-0/+7
on s390 MSI-X irqs are presented as thin or adapter interrupts for this we have to reorganize the routing entry to contain valid information for the adapter interrupt code on s390. To minimize impact on existing code we introduce an architecture function to fixup the routing entry. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-15coverity/s390x: avoid false positive in kvm_irqchip_add_adapter_routeChristian Borntraeger1-1/+1
Paolo Bonzini reported that Coverity reports an uninitialized pad value. Let's use a designated initializer for kvm_irq_routing_entry to avoid this false positive. This is similar to kvm_irqchip_add_msi_route and other users of kvm_irq_routing_entry. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15valgrind: avoid false positives in KVM_GET_DIRTY_LOG ioctlChristian Borntraeger1-1/+1
struct kvm_dirty_log contains padding fields that trigger false positives in valgrind. Let's use a designated initializer to avoid false positives from valgrind/memcheck. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15KVM_CAP_IRQFD and KVM_CAP_IRQFD_RESAMPLE checksEric Auger1-0/+7
Compute kvm_irqfds_allowed by checking the KVM_CAP_IRQFD extension. Remove direct settings in architecture specific files. Add a new kvm_resamplefds_allowed variable, initialized by checking the KVM_CAP_IRQFD_RESAMPLE extension. Add a corresponding kvm_resamplefds_enabled() function. A special notice for s390 where KVM_CAP_IRQFD was not immediatly advirtised when irqfd capability was introduced in the kernel. KVM_CAP_IRQ_ROUTING was advertised instead. This was fixed in "KVM: s390: announce irqfd capability", ebc3226202d5956a5963185222982d435378b899 whereas irqfd support was brought in 84223598778ba08041f4297fda485df83414d57e, "KVM: s390: irq routing for adapter interrupts". Both commits first appear in 3.15 so there should not be any kernel version impacted by this QEMU modification. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-23pc: kvm: check if KVM has free memory slots to avoid abort()Igor Mammedov1-1/+17
When more memory devices are used than available KVM memory slots, QEMU crashes with: kvm_alloc_slot: no free slot available Aborted (core dumped) Fix this by checking that KVM has a free slot before attempting to map memory in guest address space. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-20kvm: Fix memory slot page alignment logicAlexander Graf1-2/+4
Memory slots have to be page aligned to get entered into KVM. There is existing logic that tries to ensure that we pad memory slots that are not page aligned to the biggest region that would still fit in the alignment requirements. Unfortunately, that logic is broken. It tries to calculate the start offset based on the region size. Fix up the logic to do the thing it was intended to do and document it properly in the comment above it. With this patch applied, I can successfully run an e500 guest with more than 3GB RAM (at which point RAM starts overlapping subpage memory regions). Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de>
2014-10-10kvm fix compilation with GCC 4.3.4Paolo Bonzini1-2/+2
As usual, SLES11's GCC complained about double typedefs: /home/cohuck/git/qemu/kvm-all.c:110: error: redefinition of typedef ‘KVMState’ /home/cohuck/git/qemu/include/sysemu/kvm.h:161: error: previous declaration of ‘KVMState’ was here Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-09kvm: Make KVMState be the TYPE_KVM_ACCEL instance structEduardo Habkost1-4/+9
Now that we create an accel object before calling machine_init, we can simply use the accel object to save all KVMState data, instead of allocationg KVMState manually. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09accel: Pass MachineState object to accel init functionsEduardo Habkost1-1/+2
Most of the machine options and machine state information is in the MachineState object, not on the MachineClass. This will allow init functions to use the MachineState object directly instead of qemu_get_machine_opts() or the current_machine global. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04accel: Rename 'init' method to 'init_machine'Eduardo Habkost1-1/+1
Today, all accelerator init functions affect some global state: * tcg_init() calls tcg_exec_init() and affects globals such as tcg_tcx, page size globals, and possibly others; * kvm_init() changes the kvm_state global, cpu_interrupt_handler, and possibly others; * xen_init() changes the xen_xc global, and registers a change state handler. With the new accelerator QOM classes, initialization may now be split in two steps: * instance_init() will do basic initialization that doesn't affect any global state and don't need MachineState or MachineClass data. This will allow probing code to safely create multiple accelerator objects on the fly just for reporting host/accelerator capabilities, for example. * accel_init_machine()/init_machine() will save the accelerator object in MachineState, and do initialization steps which still affect global state, machine state, or that need data from MachineClass or MachineState. To clarify the difference between those two steps, rename init() to init_machine(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-04accel: Move KVM accel registration to kvm-all.cEduardo Habkost1-1/+25
Note that this has an user-visible side-effect: instead of reporting "KVM is not supported for this target", QEMU binaries not supporting KVM will report "kvm accelerator does not exist". As kvm_availble() always return 1 when CONFIG_KVM is enabled, we don't need to set AccelClass.available anymore. kvm_enabled() is not being completely removed yet only because qmp_query_kvm() still uses it. This also allows us to make kvm_init() static. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-26kvm/valgrind: don't mark memory as initializedChristian Borntraeger1-7/+0
since commit 7dda5dc82a77 ("migration: initialize RAM to zero") the guest memory is defined zero. No need to call valgrind on guest memory. This reverts commit 62fe83318d2f ("qemu: Use valgrind annotations to mark kvm guest memory as defined") thus speeding up kvm start if <includedir>/valgrind/valgrind.h is available. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16Introduce cpu_clean_all_dirtyMarcelo Tosatti1-0/+5
Introduce cpu_clean_all_dirty, to force subsequent cpu_synchronize_all_states to read in-kernel register state. Cc: qemu-stable@nongnu.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-12Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+2
- Memory: improve error reporting and avoid crashes on hotplug - Build: fixing block/iscsi.so and ranlib warnings on Mac OS X - Migration fixes for x86 - The odd KVM patch. # gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: (21 commits) gdbstub: init mon_chr through qemu_chr_alloc pckbd: adding new fields to vmstate mc146818rtc: add missed field to vmstate piix: do not set irq while loading vmstate serial: fixing vmstate for save/restore parallel: adding vmstate for save/restore fdc: adding vmstate for save/restore cpu: init vmstate for ticks and clock offset apic_common: vapic_paddr synchronization fix vl: use QLIST_FOREACH_SAFE to visit change state handlers exec: add parameter errp to gethugepagesize exec: report error when memory < hpagesize hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big memory: add parameter errp to memory_region_init_rom_device memory: add parameter errp to memory_region_init_ram exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr rules.mak: Fix DSO build by pulling in archive symbols util: Don't link host-utils.o if it's empty util: Move general qemu_getauxval to util/getauxval.c trace: Only link generated-tracers.o with "simple" backend ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-09kvm: do not abort if KVM_RUN failsPaolo Bonzini1-1/+2
Just go to the internal error runstate. This lets you use the "x", "dump-guest-memory" or "info register" commands. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-08KVM: Add helper to run KVM_CHECK_EXTENSION on vm fdAlexander Graf1-0/+13
We now can call KVM_CHECK_EXTENSION on the kvm fd or on the vm fd, whereas the vm version is more accurate when it comes to PPC KVM. Add a helper to make the vm version available that falls back to the non-vm variant if the vm one is not available yet to stay compatible. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-08-20kvm: run cpu state synchronization on target vcpu threadDavid Hildenbrand1-2/+16
As already done for kvm_cpu_synchronize_state(), let's trigger kvm_arch_put_registers() via run_on_cpu() for kvm_cpu_synchronize_post_reset() and kvm_cpu_synchronize_post_init(). This way, we make sure that the register synchronizing ioctls are called from the proper vcpu thread; this avoids calls to synchronize_rcu() in the kernel. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-22kvm-all: Use 'tmpcpu' instead of 'cpu' in sub-looping to avoid 'cpu' be NULLChen Gang1-2/+3
If kvm_arch_remove_sw_breakpoint() in CPU_FOREACH() always be fail, it will let 'cpu' NULL. And the next kvm_arch_remove_sw_breakpoint() in QTAILQ_FOREACH_SAFE() will get NULL parameter for 'cpu'. And kvm_arch_remove_sw_breakpoint() can assumes 'cpu' must never be NULL, so need define additional temporary variable for 'cpu' to avoid the case. Cc: qemu-stable@nongnu.org Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-20Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-2/+11
* remotes/kvm/uq/master: hw/mips: malta: Don't boot from flash with KVM T&E MAINTAINERS: Add entry for MIPS KVM target-mips: Enable KVM support in build system hw/mips: malta: Add KVM support hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset() target-mips: kvm: Add main KVM support for MIPS kvm: Allow arch to set sigmask length target-mips: get_physical_address: Add KVM awareness target-mips: get_physical_address: Add defines for segment bases hw/mips: Add API to convert KVM guest KSEG0 <-> GPA hw/mips/cputimer: Don't start periodic timer in KVM mode target-mips: Reset CPU timer consistently KVM: Fix GSI number space limit Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+4
pc,pci,virtio,hotplug fixes, enhancements numa work by Hu Tao and others memory hotplug by Igor vhost-user by Nikolay, Antonios and others guest virtio announcements by Jason qtest fixes by Sergey qdev hotplug fixes by Paolo misc other fixes mostly by myself Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (109 commits) numa: use RAM_ADDR_FMT with ram_addr_t qapi/string-output-visitor: fix bugs tests: simplify code qapi: fix input visitor bugs acpi: rephrase comment qmp: add ACPI_DEVICE_OST event handling qmp: add query-acpi-ospm-status command acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices acpi: introduce TYPE_ACPI_DEVICE_IF interface qmp: add query-memory-devices command numa: handle mmaped memory allocation failure correctly pc: acpi: do not hardcode preprocessor qmp: clean out whitespace qdev: recursively unrealize devices when unrealizing bus qdev: reorganize error reporting in bus_set_realized qapi: fix build on glib < 2.28 qapi: make string output visitor parse int list qapi: make string input visitor parse int list tests: fix memory leak in test of string input visitor hmp: add info memdev ... Conflicts: include/hw/i386/pc.h [PMM: fixed minor conflict in pc.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19kvm: Handle exit reason KVM_EXIT_SYSTEM_EVENTPranavkumar Sawargaonkar1-0/+16
In-kernel PSCI v0.2 emulation of KVM ARM/ARM64 forwards SYSTEM_OFF and SYSTEM_RESET function calls to QEMU using KVM_EXIT_SYSTEM_EVENT exit reason. This patch updates kvm_cpu_exec() to handle KVM_SYSTEM_EVENT_SHUTDOWN and KVM_SYSTEM_EVENT_RESET system-level events from QEMU-side. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-4-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19Add kvm_eventfds_enabled functionNikolay Nikolaev1-0/+4
Add a function to check if the eventfd capability is present in KVM in the host kernel. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18kvm: Allow arch to set sigmask lengthJames Hogan1-1/+10
MIPS/Linux is unusual in having 128 signals rather than just 64 like most other architectures. This means its sigmask is 16 bytes instead of 8, so allow arches to override the sigmask->len value passed to the KVM_SET_SIGNAL_MASK ioctl in kvm_set_signal_mask() by calling kvm_set_sigmask_len() from kvm_arch_init(). Otherwise default to 8 bytes. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18KVM: Fix GSI number space limitAlexander Graf1-1/+1
KVM tells us the number of GSIs it can handle inside the kernel. That value is basically KVM_MAX_IRQ_ROUTES. However when we try to set the GSI mapping table, it checks for r = -EINVAL; if (routing.nr >= KVM_MAX_IRQ_ROUTES) goto out; erroring out even when we're only using all of the GSIs. To make sure we never hit that limit, let's reduce the number of GSIs we get from KVM by one. Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-1/+3
* remotes/kvm/uq/master: kvm: Fix eax for cpuid leaf 0x40000000 kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation kvm: Enable -cpu option to hide KVM kvm: Ensure negative return value on kvm_init() error handling path target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflags target-i386: get CPL from SS.DPL target-i386: rework CPL checks during task switch, preparing for next patch target-i386: fix segment flags for SMM and VM86 mode target-i386: Fix vm86 mode regression introduced in fd460606fd6f. kvm_stat: allow choosing between tracepoints and old stats kvmclock: Ensure time in migration never goes backward Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-30kvm: Ensure negative return value on kvm_init() error handling pathEduardo Habkost1-1/+3
We need to ensure ret < 0 when going through the error path, or QEMU may try to run the half-initialized VM and crash. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-20s390x/virtio-ccw: wire up irq routing and irqfdsCornelia Huck1-1/+37
Make use of the new s390 adapter irq routing support to enable real in-kernel irqfds for virtio-ccw with adapter interrupts. Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward compatibility. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-13kvm: reset state from the CPU's reset methodPaolo Bonzini1-11/+0
Now that we have a CPU object with a reset method, it is better to keep the KVM reset close to the CPU reset. Using qemu_register_reset as we do now keeps them far apart. With this patch, PPC no longer calls the kvm_arch_ function, so it can get removed there. Other arches call it from their CPU reset handler, and the function gets an ARMCPU/X86CPU/S390CPU. Note that ARM- and s390-specific functions are called kvm_arm_* and kvm_s390_*, while x86-specific functions are called kvm_arch_*. That follows the convention used by the different architectures. Changing that is the topic of a separate patch. Reviewed-by: Gleb Natapov <gnatapov@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13kvm: make one_reg helpers available for everyoneCornelia Huck1-0/+28
s390x introduced helper functions for getting/setting one_regs with commit 860643bc. However, nothing about these is s390-specific. Alexey Kardashevskiy had already posted a general version, so let's merge the two patches and massage the code a bit. CC: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05machine: Replace QEMUMachine by MachineClass in accelerator configurationMarcel Apfelbaum1-3/+3
This minimizes QEMUMachine usage, as part of machine QOM-ification. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-04-14Revert "fix return check for KVM_GET_DIRTY_LOG ioctl"Michael Tokarev1-1/+1
This reverts commit b533f658a98325d0e47b36113bd9f5bcc046fdae. The original code was wrong, because effectively it ignored errors from kernel, because kernel does not return -1 on error case but returns -errno, and does not return -EPERM for this particular ioctl. But in some cases kernel actually returned unsuccessful result, namely, when the dirty bitmap in requested slot does not exist it returns -ENOENT. With new code this condition becomes an error when it shouldn't be. Revert that patch instead of fixing it properly this late in the release process. I disagree with this approach, but let's make things move _somewhere_, instead of arguing endlessly whch of the 2 proposed fixes is better. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 1397477644-902-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-27fix return check for KVM_GET_DIRTY_LOG ioctlMario Smarduch1-1/+1
Fix return condition check from kvm_vm_ioctl(s, KVM_GET_DIRTY_LOG, &d) to handle internal failures or no support for memory slot dirty bitmap. Otherwise the ioctl succeeds and continues with migration. Addresses BUG# 1294227 Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-11Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-2/+1
* remotes/kvm/uq/master: target-i386: bugfix of Intel MPX file_ram_alloc: unify mem-path,mem-prealloc error handling kvm-all: exit in case max vcpus exceeded Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-05kvm: Add a new machine option kvm-typeAneesh Kumar K.V1-3/+14
Targets like ppc64 support different types of KVM, one which use hypervisor mode and the other which doesn't. Add a new machine option kvm-type that helps in selecting the respective ones We also add a new QEMUMachine callback get_vm_type that helps in mapping the string representation of kvm type specified. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [agraf: spelling fixes, use error_report(), use qemumachine.h] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-02-27kvm-all: exit in case max vcpus exceededMarcelo Tosatti1-2/+1
Rather than fall back to TCG (so the user has to discover whats happening, in case of no access to qemu stdout/stderr). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-27Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-1/+1
* remotes/kvm/uq/master: KVM: Use return value for error print Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26kvm: Common device control API functionsChristoffer Dall1-0/+39
Introduces two simple functions: int kvm_device_ioctl(int fd, int type, ...); int kvm_create_device(KVMState *s, uint64_t type, bool test); These functions wrap the basic ioctl-based interactions with KVM in a way similar to other KVM ioctl wrappers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26kvm: Introduce kvm_arch_irqchip_createChristoffer Dall1-2/+9
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation for architecture-specific use of the device control API to create IRQ chips. Following patches will implement the ARM irqchip create method to prefer the device control API over the older KVM_CREATE_IRQCHIP API. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-21KVM: Use return value for error printAlexander Graf1-1/+1
Commit 94ccff13 introduced a more verbose failure message and retry operations on KVM VM creation. However, it ended up using a variable for its failure message that hasn't been initialized yet. Fix it to use the value it meant to set. Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-06Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-4/+3
* remotes/kvm/uq/master: target-i386: Move KVM default-vendor hack to instance_init target-i386: Don't change x86_def_t struct on cpu_x86_register() target-i386: Eliminate CONFIG_KVM #ifdefs kvm: add support for hyper-v timers kvm: make hyperv vapic assist page migratable kvm: make hyperv hypercall and guest os id MSRs migratable. kvm: make availability of Hyper-V enlightenments dependent on KVM_CAP_HYPERV KVM: fix coexistence of KVM and Hyper-V leaves kvm: print suberror on all internal errors target-i386: kvm_check_features_against_host(): Kill feature word array target-i386: kvm_cpu_fill_host(): Fill feature words in a loop target-i386: kvm_cpu_fill_host(): Set all feature words at end of function target-i386: kvm_cpu_fill_host(): No need to check xlevel2 target-i386: kvm_cpu_fill_host(): No need to check CPU vendor target-i386: kvm_cpu_fill_host(): No need to check level target-i386: kvm_cpu_fill_host(): Kill unused code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-03kvm: print suberror on all internal errorsRadim Krčmář1-4/+3
KVM introduced internal error exit reason and suberror at the same time, and later extended it with internal error data. QEMU does not report suberror on hosts between these two events because we check for the extension. (half a year in 2009, but it is misleading) Fix by removing KVM_CAP_INTERNAL_ERROR_DATA condition on printf. (partially improved by bb44e0d12df70 and ba4047cf848a3 in the past) Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-01Merge remote-tracking branch ↵Peter Maydell1-0/+1
'remotes/awilliam/tags/vfio-pci-for-qemu-20140128.0' into staging vfio-pci updates include: - Destroy MemoryRegions on device teardown - Print warnings around PCI option ROM failures - Skip bogus mappings from 64bit BAR sizing - Act on DMA mapping failures - Fix alignment to avoid MSI-X table mapping - Fix debug macro typo # gpg: Signature made Tue 28 Jan 2014 15:27:47 GMT using RSA key ID 3BB08B22 # gpg: Can't check signature: public key not found * remotes/awilliam/tags/vfio-pci-for-qemu-20140128.0: vfio: correct debug macro typo vfio: fix mapping of MSIX bar kvm: initialize qemu_host_page_size vfio-pci: Fail initfn on DMA mapping errors vfio: Filter out bogus mappings vfio: Do not reattempt a failed rom read vfio: warn if host device rom can't be read vfio: Destroy memory regions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-24Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori1-4/+10
* qemu-kvm/uq/master: kvm: always update the MPX model specific register KVM: fix addr type for KVM_IOEVENTFD KVM: Retry KVM_CREATE_VM on EINTR mempath prefault: fix off-by-one error kvm: x86: Separately write feature control MSR on reset roms: Flush icache when writing roms to guest memory target-i386: clear guest TSC on reset target-i386: do not special case TSC writeback target-i386: Intel MPX Conflicts: exec.c aliguori: fix trivial merge conflict in exec.c Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-17kvm: initialize qemu_host_page_sizeAlexey Kardashevskiy1-0/+1
There is a HOST_PAGE_ALIGN macro which makes sense for KVM accelerator but it uses qemu_host_page_size/qemu_host_page_mask which initialized for TCG only. This moves qemu_host_page_size/qemu_host_page_mask initialization from TCG's page_init() and adds a call for it from kvm_init(). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-01-15KVM: fix addr type for KVM_IOEVENTFDAlexey Kardashevskiy1-1/+1
The @addr here is a guest physical address and can easily be bigger than 4G. This changes uint32_t to hwaddr. Cc: qemu-stable@nongnu.org Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15KVM: Retry KVM_CREATE_VM on EINTRthomas knych1-3/+9
Upstreaming this change from Android (https://android-review.googlesource.com/54211). On heavily loaded machines with many VM instances we see KVM_CREATE_VM failing with EINTR on this path: kvm_dev_ioctl_create_vm -> kvm_create_vm -> kvm_init_mmu_notifier -> mmu_notifier_register -> do_mmu_notifier_register -> mm_take_all_locks which checks if any signals have been raised while it was attaining locks and returns EINTR. Retrying the system call greatly improves reliability. Cc: qemu-stable@nongnu.org Signed-off-by: thomas knych <thomaswk@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-13memory: move bitmap synchronization to its own functionJuan Quintela1-25/+2
We want to have all the functions that handle directly the dirty bitmap near. We will change it later. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2014-01-13kvm: refactor start address calculationJuan Quintela1-4/+4
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2014-01-13kvm: use directly cpu_physical_memory_* api for tracking dirty pagesJuan Quintela1-2/+5
Performance is important in this function, and we want to optimize even further. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
generated by cgit v1.1 at 2024-12-26 04:04:00 +0000