aboutsummaryrefslogtreecommitdiff
path: root/job.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-12job: Fix off-by-one assert checks for JobSTT and JobVerbTableLiam Merwick1-2/+2
In the assert checking the array dereference of JobVerbTable[verb] in job_apply_verb() the check of the index, verb, allows an overrun because an index equal to the array size is permitted. Similarly, in the assert check of JobSTT[s0][s1] with index s1 in job_state_transition(), an off-by-one overrun is not flagged either. This is not a run-time issue as there are no callers actually passing in the max value. Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com> Reviewed-by: Darren Kenny <Darren.Kenny@oracle.com> Reviewed-by: Mark Kanda <Mark.Kanda@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1541453919-25973-2-git-send-email-Liam.Merwick@oracle.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25block: Use a single global AioWaitKevin Wolf1-2/+1
When draining a block node, we recurse to its parent and for subtree drains also to its children. A single AIO_WAIT_WHILE() is then used to wait for bdrv_drain_poll() to become true, which depends on all of the nodes we recursed to. However, if the respective child or parent becomes quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent is checked, while AIO_WAIT_WHILE() depends on the AioWait of the original node. Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE(). This may mean that the draining thread gets a few more unnecessary wakeups because an unrelated operation got completed, but we already wake it up when something _could_ have changed rather than only if it has certainly changed. Apart from that, drain is a slow path anyway. In theory it would be possible to use wakeups more selectively and still correctly, but the gains are likely not worth the additional complexity. In fact, this patch is a nice simplification for some places in the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25job: Avoid deadlocks in job_completed_txn_abort()Kevin Wolf1-5/+11
Amongst others, job_finalize_single() calls the .prepare/.commit/.abort callbacks of the individual job driver. Recently, their use was adapted for all block jobs so that they involve code calling AIO_WAIT_WHILE() now. Such code must be called under the AioContext lock for the respective job, but without holding any other AioContext lock. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25blockjob: Lie better in child_job_drained_poll()Kevin Wolf1-1/+10
Block jobs claim in .drained_poll() that they are in a quiescent state as soon as job->deferred_to_main_loop is true. This is obviously wrong, they still have a completion BH to run. We only get away with this because commit 91af091f923 added an unconditional aio_poll(false) to the drain functions, but this is bypassing the regular drain mechanisms. However, just removing this and telling that the job is still active doesn't work either: The completion callbacks themselves call drain functions (directly, or indirectly with bdrv_reopen), so they would deadlock then. As a better lie, tell that the job is active as long as the BH is pending, but falsely call it quiescent from the point in the BH when the completion callback is called. At this point, nested drain calls won't deadlock because they ignore the job, and outer drains will wait for the job to really reach a quiescent state because the callback is already running. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25job: Use AIO_WAIT_WHILE() in job_finish_sync()Kevin Wolf1-8/+6
job_finish_sync() needs to release the AioContext lock of the job before calling aio_poll(). Otherwise, callbacks called by aio_poll() would possibly take the lock a second time and run into a deadlock with a nested AIO_WAIT_WHILE() call. Also, job_drain() without aio_poll() isn't necessarily enough to make progress on a job, it could depend on bottom halves to be executed. Combine both open-coded while loops into a single AIO_WAIT_WHILE() call that solves both of these problems. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25blockjob: Wake up BDS when job becomes idleKevin Wolf1-0/+7
In the context of draining a BDS, the .drained_poll callback of block jobs is called. If this returns true (i.e. there is still some activity pending), the drain operation may call aio_poll() with blocking=true to wait for completion. As soon as the pending activity is completed and the job finally arrives in a quiescent state (i.e. its coroutine either yields with busy=false or terminates), the block job must notify the aio_poll() loop to wake up, otherwise we get a deadlock if both are running in different threads. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25job: Fix missing locking due to mismergeKevin Wolf1-0/+4
job_completed() had a problem with double locking that was recently fixed independently by two different commits: "job: Fix nested aio_poll() hanging in job_txn_apply" "jobs: add exit shim" One fix removed the first aio_context_acquire(), the other fix removed the other one. Now we have a bug again and the code is run without any locking. Add it back in one of the places. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-09-25job: Fix nested aio_poll() hanging in job_txn_applyFam Zheng1-13/+5
All callers have acquired ctx already. Doing that again results in aio_poll() hang. This fixes the problem that a BDRV_POLL_WHILE() in the callback cannot make progress because ctx is recursively locked, for example, when drive-backup finishes. There are two callers of job_finalize(): fam@lemon:~/work/qemu [master]$ git grep -w -A1 '^\s*job_finalize' blockdev.c: job_finalize(&job->job, errp); blockdev.c- aio_context_release(aio_context); -- job-qmp.c: job_finalize(job, errp); job-qmp.c- aio_context_release(aio_context); -- tests/test-blockjob.c: job_finalize(&job->job, &error_abort); tests/test-blockjob.c- assert(job->job.status == JOB_STATUS_CONCLUDED); Ignoring the test, it's easy to see both callers to job_finalize (and job_do_finalize) have acquired the context. Cc: qemu-stable@nongnu.org Reported-by: Gu Nini <ngu@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-09-25jobs: remove .exit callbackJohn Snow1-43/+34
Now that all of the jobs use the component finalization callbacks, there's no use for the heavy-hammer .exit callback anymore. job_exit becomes a glorified type shim so that we can call job_completed from aio_bh_schedule_oneshot. Move these three functions down into job.c to eliminate a forward reference. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180906130225.5118-12-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-24Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-08-31-v2' ↵Peter Maydell1-48/+25
into staging Block patches: - (Block) job exit refactoring, part 1 (removing job_defer_to_main_loop()) - test-bdrv-drain leak fix # gpg: Signature made Fri 31 Aug 2018 15:30:33 BST # gpg: using RSA key F407DB0061D5CF40 # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/xanclic/tags/pull-block-2018-08-31-v2: jobs: remove job_defer_to_main_loop jobs: remove ret argument to job_completed; privatize it block/backup: make function variables consistently named jobs: utilize job_exit shim block/mirror: utilize job_exit shim block/commit: utilize job_exit shim jobs: add exit shim jobs: canonize Error object jobs: change start callback to run callback tests: fix bdrv-drain leak Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-31jobs: remove job_defer_to_main_loopJohn Snow1-38/+2
Now that the job infrastructure is handling the job_completed call for all implemented jobs, we can remove the interface that allowed jobs to schedule their own completion. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180830015734.19765-10-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-08-31jobs: remove ret argument to job_completed; privatize itJohn Snow1-5/+6
Jobs are now expected to return their retcode on the stack, from the .run callback, so we can remove that argument. job_cancel does not need to set -ECANCELED because job_completed will update the return code itself if the job was canceled. While we're here, make job_completed static to job.c and remove it from job.h; move the documentation of return code to the .run() callback and to the job->ret property, accordingly. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20180830015734.19765-9-jsnow@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-08-31jobs: add exit shimJohn Snow1-0/+18
All jobs do the same thing when they leave their running loop: - Store the return code in a structure - wait to receive this structure in the main thread - signal job completion via job_completed Few jobs do anything beyond exactly this. Consolidate this exit logic for a net reduction in SLOC. More seriously, when we utilize job_defer_to_main_loop_bh to call a function that calls job_completed, job_finalize_single will run in a context where it has recursively taken the aio_context lock, which can cause hangs if it puts down a reference that causes a flush. You can observe this in practice by looking at mirror_exit's careful placement of job_completed and bdrv_unref calls. If we centralize job exiting, we can signal job completion from outside of the aio_context, which should allow for job cleanup code to run with only one lock, which makes cleanup callbacks less tricky to write. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180830015734.19765-4-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-08-31jobs: canonize Error objectJohn Snow1-12/+6
Jobs presently use both an Error object in the case of the create job, and char strings in the case of generic errors elsewhere. Unify the two paths as just j->err, and remove the extra argument from job_completed. The integer error code for job_completed is kept for now, to be removed shortly in a separate patch. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20180830015734.19765-3-jsnow@redhat.com [mreitz: Dropped a superfluous g_strdup()] Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-08-31jobs: change start callback to run callbackJohn Snow1-3/+3
Presently we codify the entry point for a job as the "start" callback, but a more apt name would be "run" to clarify the idea that when this function returns we consider the job to have "finished," except for any cleanup which occurs in separate callbacks later. As part of this clarification, change the signature to include an error object and a return code. The error ptr is not yet used, and the return code while captured, will be overwritten by actions in the job_completed function. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180830015734.19765-2-jsnow@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu1-1/+1
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-21block: for jobs, do not clear user_paused until after the resumeJeff Cody1-1/+1
The function job_cancel_async() will always cause an assert for blockjob user resume. We set job->user_paused to false, and then call job->driver->user_resume(). In the case of blockjobs, this is the block_job_user_resume() function. In that function, we assert that job.user_paused is set to true. Unfortunately, right before calling this function, it has explicitly been set to false. The fix is pretty simple: set job->user_paused to false only after the job user_resume() function has been called. Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: bb183b77d8f2dd6bd67b8da559a90ac1e74b2052.1534868459.git.jcody@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-06-18job: Add job_progress_increase_remaining()Max Reitz1-0/+5
Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20180613181823.13618-12-mreitz@redhat.com Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-30job: Add error message for failing jobsKevin Wolf1-2/+14
So far we relied on job->ret and strerror() to produce an error message for failed jobs. Not surprisingly, this tends to result in completely useless messages. This adds a Job.error field that can contain an error string for a failing job, and a parameter to job_completed() that sets the field. As a default, if NULL is passed, we continue to use strerror(job->ret). All existing callers are changed to pass NULL. They can be improved in separate patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-05-23job: Add query-jobs QMP commandKevin Wolf1-1/+1
This adds a minimal query-jobs implementation that shouldn't pose many design questions. It can later be extended to expose more information, and especially job-specific information. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23job: Add JOB_STATUS_CHANGE QMP eventKevin Wolf1-0/+10
This adds a QMP event that is emitted whenever a job transitions from one status to another. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-05-23job: Move progress fields to JobKevin Wolf1-0/+10
BlockJob has fields .offset and .len, which are actually misnomers today because they are no longer tied to block device sizes, but just progress counters. As such they make a lot of sense in generic Jobs. This patch moves the fields to Job and renames them to .progress_current and .progress_total to describe their function better. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_transition_to_ready()Kevin Wolf1-3/+13
The transition to the READY state was still performed in the BlockJob layer, in the same function that sent the BLOCK_JOB_READY QMP event. This patch brings the state transition to the Job layer and implements the QMP event using a notifier called from the Job layer, like we already do for other events related to state transitions. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_is_ready()Kevin Wolf1-0/+22
Instead of having a 'bool ready' in BlockJob, add a function that derives its value from the job status. At the same time, this fixes the behaviour to match what the QAPI documentation promises for query-block-job: 'true if the job may be completed'. When the ready flag was introduced in commit ef6dbf1e46e, the flag never had to be reset to match the description because after being ready, the jobs would immediately complete and disappear. Job transactions and manual job finalisation were introduced only later. With these changes, jobs may stay around even after having completed (and they are not ready to be completed a second time), however their patches forgot to reset the ready flag. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_dismiss()Kevin Wolf1-1/+14
This moves block_job_dismiss() to the Job layer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_yield()Kevin Wolf1-2/+18
This moves block_job_yield() to the Job layer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move completion and cancellation to JobKevin Wolf1-8/+76
This moves the top-level job completion and cancellation functions from BlockJob to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23job: Move transactions to JobKevin Wolf1-8/+226
This moves the logic that implements job transactions from BlockJob to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move job_finish_sync() to JobKevin Wolf1-0/+28
block_job_finish_sync() doesn't contain anything block job specific any more, so it can be moved to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move .complete callback to JobKevin Wolf1-0/+16
This moves the .complete callback that tells a READY job to complete from BlockJobDriver to JobDriver. The wrapper function job_complete() doesn't require anything block job specific any more and can be moved to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_drain()Kevin Wolf1-0/+11
block_job_drain() contains a blk_drain() call which cannot be moved to Job, so add a new JobDriver callback JobDriver.drain which has a common implementation for all BlockJobs. In addition to this we keep the existing BlockJobDriver.drain callback that is called by the common drain implementation for all block jobs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move single job finalisation to JobKevin Wolf1-2/+98
This moves the finalisation of a single job from BlockJob to Job. Some part of this code depends on job transactions, and job transactions call this code, we introduce some temporary calls from Job functions to BlockJob ones. This will be fixed once transactions move to Job, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Add job_event_*()Kevin Wolf1-0/+19
Go through the Job layer in order to send QMP events. For the moment, these functions only call a notifier in the BlockJob layer that sends the existing commands. This uses notifiers rather than JobDriver callbacks because internal users of jobs won't receive QMP events, but might still be interested in getting notified for the events. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move BlockJobCreateFlags to JobKevin Wolf1-1/+10
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL checks to job_create() and the auto_{finalize,dismiss} fields from BlockJob to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Replace BlockJob.completed with job_is_completed()Kevin Wolf1-0/+22
Since we introduced an explicit status to block job, BlockJob.completed is redundant because it can be derived from the status. Remove the field from BlockJob and add a function to derive it from the status at the Job level. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Move pause/resume functions to JobKevin Wolf1-0/+59
While we already moved the state related to job pausing to Job, the functions to do were still BlockJob only. This commit moves them over to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Add job_sleep_ns()Kevin Wolf1-0/+32
There is nothing block layer specific about block_job_sleep_ns(), so move the function to Job. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23job: Move coroutine and related code to JobKevin Wolf1-0/+137
This commit moves some core functions for dealing with the job coroutine from BlockJob to Job. This includes primarily entering the coroutine (both for the first and reentering) and yielding explicitly and at pause points. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Move defer_to_main_loop to JobKevin Wolf1-0/+32
Move the defer_to_main_loop functionality from BlockJob to Job. The code can be simplified because we can use job->aio_context in job_defer_to_main_loop_bh() now, instead of having to access the BlockDriverState. Probably taking the data->aio_context lock in addition was already unnecessary in the old code because we didn't actually make use of anything protected by the old AioContext except getting the new AioContext, in case it changed between scheduling the BH and running it. But it's certainly unnecessary now that the BDS isn't accessed at all any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Add Job.aio_contextKevin Wolf1-1/+3
When block jobs need an AioContext, they just take it from their main block node. Generic jobs don't have a main block node, so we need to assign them an AioContext explicitly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Move cancelled to JobKevin Wolf1-0/+5
We cannot yet move the whole logic around job cancelling to Job because it depends on quite a few other things that are still only in BlockJob, but we can move the cancelled field at least. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Add reference countingKevin Wolf1-4/+18
This moves reference counting from BlockJob to Job. In order to keep calling the BlockJob cleanup code when the job is deleted via job_unref(), introduce a new JobDriver.free callback. Every block job must use block_job_free() for this callback, this is asserted in block_job_create(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Move state transitions to JobKevin Wolf1-0/+56
This moves BlockJob.status and the closely related functions (block_)job_state_transition() and (block_)job_apply_verb to Job. The two QAPI enums are renamed to JobStatus and JobVerb. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-05-23job: Maintain a list of all jobsKevin Wolf1-0/+31
This moves the job list from BlockJob to Job. Now we can check for duplicate IDs in job_create(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Add job_delete()Kevin Wolf1-0/+6
This moves freeing the Job object and its fields from block_job_unref() to job_delete(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Add JobDriver.job_typeKevin Wolf1-0/+10
This moves the job_type field from BlockJobDriver to JobDriver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23job: Create Job, JobDriver and job_create()Kevin Wolf1-0/+48
This is the first step towards creating an infrastructure for generic background jobs that aren't tied to a block device. For now, Job only stores its ID and JobDriver, the rest stays in BlockJob. The following patches will move over more parts of BlockJob to Job if they are meaningful outside the context of a block job. BlockJob.driver is now redundant, but this patch leaves it around to avoid unnecessary churn. The next patches will get rid of almost all of its uses anyway so that it can be removed later with much less churn. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
generated by cgit v1.1 at 2024-12-26 15:02:33 +0000