aboutsummaryrefslogtreecommitdiff
path: root/io
AgeCommit message (Collapse)AuthorFilesLines
2021-06-08sockets: Support multipath TCPDr. David Alan Gilbert1-0/+4
Multipath TCP allows combining multiple interfaces/routes into a single socket, with very little work for the user/admin. It's enabled by 'mptcp' on most socket addresses: ./qemu-system-x86_64 -nographic -incoming tcp:0:4444,mptcp Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210421112834.107651-6-dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08io/net-listener: Call the notifier during finalizeDr. David Alan Gilbert1-0/+3
Call the notifier during finalize; it's currently only called if we change it, which is not the intent. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210421112834.107651-3-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08channel-socket: Only set CLOEXEC if we have space for fdsDr. David Alan Gilbert1-4/+4
MSG_CMSG_CLOEXEC cleans up received fd's; it's really only for Unix sockets, but currently we enable it for everything; some socket types (IP_MPTCP) don't like this. Only enable it when we're giving the recvmsg room to receive fd's anyway. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210421112834.107651-2-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-02-12io: error_prepend() in qio_channel_readv_full_all() causes segfaultJagannathan Raman1-2/+1
Using error_prepend() in qio_channel_readv_full_all() causes a segfault as errp is not set when ret is 0. This results in the failure of iotest 83. Replacing with error_setg() fixes the problem. Additionally, removes a full stop at the end of error message Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Fixes: bebab91ebdfc591f8793a9a17370df1bfbe8b2ca (io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers) Message-Id: <be476bcdb99e820fec0fa09fe8f04c9dd3e62473.1613128220.git.jag.raman@oracle.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-10io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpersElena Ufimtseva1-20/+81
Adds qio_channel_readv_full_all_eof() and qio_channel_readv_full_all() to read both data and FDs. Refactors existing code to use these helpers. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: b059c4cc0fb741e794d644c144cc21372cad877d.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10io: add qio_channel_writev_full_all helperElena Ufimtseva1-1/+14
Adds qio_channel_writev_full_all() to transmit both data and FDs. Refactors existing code to use this helper. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 480fbf1fe4152495d60596c9b665124549b426a5.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-13Merge remote-tracking branch 'remotes/armbru/tags/pull-yank-2021-01-13' into ↵Peter Maydell1-2/+4
staging Yank patches patches for 2021-01-13 # gpg: Signature made Wed 13 Jan 2021 09:25:46 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-yank-2021-01-13: tests/test-char.c: Wait for the chardev to connect in char_socket_client_dupid_test io: Document qmp oob suitability of qio_channel_shutdown and io_shutdown io/channel-tls.c: make qio_channel_tls_shutdown thread-safe migration: Add yank feature chardev/char-socket.c: Add yank feature block/nbd.c: Add yank feature Introduce yank feature Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-13io/channel-tls.c: make qio_channel_tls_shutdown thread-safeLukas Straub1-2/+4
Make qio_channel_tls_shutdown thread-safe by using atomics when accessing tioc->shutdown. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <5bd8733f583f3558b32250fd0eb576b7aa756485.1609167865.git.lukasstraub2@web.de> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-12meson: Propagate gnutls dependencyRoman Bolshakov1-1/+1
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but GNUTLS_CFLAGS, that describe include path, are not propagated transitively to all users of crypto and build fails if GnuTLS headers reside in non-standard directory (which is a case for homebrew on Apple Silicon). Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-29io: Don't use '#' flag of printf formatAlexChen1-1/+1
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: AlexChen <alex.chen@huawei.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-29io: Fix Lesser GPL version numberChetan Pant11-11/+11
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-12io: Move the creation of the library to the main meson.buildPhilippe Mathieu-Daudé1-10/+0
Be consistent creating all the libraries in the main meson.build file. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201006125602.2311423-7-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPEEduardo Habkost2-2/+0
The requirement to specify the parent class type makes the macro harder to use and easy to misuse (silent bugs can be introduced if the wrong struct type is specified). Simplify the macro by just not declaring any class struct, allowing us to remove the class_size field from the TypeInfo variables for those types. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200916182519.415636-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16util: rename qemu_open() to qemu_open_old()Daniel P. Berrangé1-1/+1
We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-08-21meson: convert io directory to MesonMarc-André Lureau2-12/+25
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-0/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10io/task: Move 'qom/object.h' header to sourcePhilippe Mathieu-Daudé1-0/+1
We need "qom/object.h" to call object_ref()/object_unref(), and to test the TYPE_DUMMY. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200504115656.6045-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-29io: Fix qio_channel_socket_close() error handlingMarkus Armbruster1-2/+3
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. qio_channel_socket_close() passes @errp first to socket_listen_cleanup(), and then, if closesocket() fails, to error_setg_errno(). If socket_listen_cleanup() failed, this will trip the assertion in error_setv(). Fix by ignoring a second error. Fixes: 73564c407caedf992a1c688b5fea776a8b56ba2a Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200422130719.28225-11-armbru@redhat.com>
2020-02-07io/channel-websock: treat 'binary' and no sub-protocol as the sameYu-Chen Lin1-12/+24
noVNC doesn't use 'binary' protocol by default after commit c912230309806aacbae4295faf7ad6406da97617. It will cause qemu return 400 when handshaking. To overcome this problem and remain compatibility of older noVNC client. We treat 'binary' and no sub-protocol as the same so that we can support different version of noVNC client. Tested on noVNC before c912230 and after c912230. Buglink: https://bugs.launchpad.net/qemu/+bug/1849644 Signed-off-by: Yu-Chen Lin <npes87184@gmail.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-03socket: Add num connections to qio_net_listener_open_sync()Juan Quintela1-1/+2
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-09-03socket: Add num connections to qio_channel_socket_async()Juan Quintela2-8/+24
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-09-03socket: Add num connections to qio_channel_socket_sync()Juan Quintela3-5/+6
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-09-03socket: Add backlog parameter to socket_listenJuan Quintela1-1/+1
Current parameter was always one. We continue with that value for now in all callers. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> --- Moved trace to socket_listen
2019-08-21main-loop: Fix GSource leak in qio_task_thread_worker()Alberto Garcia1-0/+1
After g_source_attach() the GMainContext holds a reference to the GSource, so the caller does not need to keep it. qio_task_thread_worker() is not releasing its reference so the GSource is being leaked since a17536c594bfed94d05667b419f747b692f5fc7f. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <1565625509-404969-2-git-send-email-andrey.shinkevich@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster9-0/+9
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-6/+6
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-20io: fix handling of EOF / error conditions in websock GSourceDaniel P. Berrangé1-1/+7
We were never reporting the G_IO_HUP event when an end of file was hit on the websocket channel. We also didn't report G_IO_ERR when we hit a fatal error processing the websocket protocol. The latter in particular meant that the chardev code would not notice when an eof/error was encountered on the websocket channel, unless the guest OS happened to trigger a write operation. This meant that once the first client had quit, the chardev would never listen to accept a new client. Fixes launchpad bug 1816819 Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-25io: Remove redundant read/write_coroutine assignmentsKevin Wolf1-6/+6
qio_channel_yield() now updates ioc->read_write/coroutine and calls qio_channel_set_aio_fd_handlers(), so the code in the handlers has become redundant and can be removed. This does not make a difference in intermediate states because aio_co_wake() really enters the coroutine immediately here: These handlers are never run in coroutine context, and we're in the right AioContext because qio_channel_attach_aio_context() asserts that the handlers are inactive. To make these conditions more obvious, assert the right AioContext. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25io: Make qio_channel_yield() interruptibleKevin Wolf1-0/+10
Similar to how qemu_co_sleep_ns() allows preemption from an external coroutine entry, allow reentering qio_channel_yield() early. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-12io: add qio_task_wait_thread to join with a background threadDaniel P. Berrangé2-4/+39
Add the ability for a caller to wait for completion of the background thread to synchronously dispatch its result, without needing to wait for the main loop to run the idle callback. This method needs very careful usage to avoid a dangerous race condition with the free'ing of the task. The completion callback is normally invoked from an idle callback registered with the main loop context. The qio_task_wait_thread method must only be called if the completion callback has not yet run. The only safe way to achieve this is to run the qio_task_wait_thread method from the thread that executes the main loop. It is generally a bad idea to use this method since it will block execution of the main loop, however, the design of the character devices and its usage from vhostuser already requires blocking execution. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190211182442.8542-3-berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-12io: store reference to thread information in the QIOTask structDaniel P. Berrangé1-30/+34
Currently the struct QIOTaskThreadData is only needed by the worker thread, but a subsequent patch will need to access it from another context. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190211182442.8542-2-berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-01-24io: ensure UNIX client doesn't unlink server socketDaniel P. Berrangé1-15/+4
The qio_channel_socket_close method for was mistakenly unlinking the UNIX server socket, even if the channel was a client connection. This was not noticed with chardevs, since they never call close, but with the VNC server, this caused the VNC server socket to be deleted after the first client quit. The qio_channel_socket_close method also needlessly reimplemented the logic that already exists in socket_listen_cleanup(). Just call that method directly, for listen sockets only. This fixes a regression introduced in QEMU 3.0.0 with commit d66f78e1eaa832f73c771d9df1b606fe75d52a50 Author: Pavel Balaev <mail@void.so> Date: Mon May 21 19:17:35 2018 +0300 Delete AF_UNIX socket after close Fixes launchpad #1795100 Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-11-19io: return 0 for EOF in TLS session read after shutdownDaniel P. Berrangé1-0/+5
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the underlying OS read() function. It will consider this an error and return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0 return value. It expects apps to arrange for clean termination at the protocol level and not rely on seeing EOF from a read call to detect shutdown. This is to harden apps against a malicious 3rd party causing termination of the sockets layer. This is unhelpful for the QEMU NBD code which does have a clean protocol level shutdown, but still relies on seeing 0 from the I/O channel read in the coroutine handling incoming replies. The upshot is that when using a plain NBD connection shutdown is silent, but when using TLS, the client spams the console with Cannot read from TLS channel: Broken pipe The NBD connection has, however, called qio_channel_shutdown() at this point to indicate that it is done with I/O. This gives the opportunity to optimize the code such that when the channel has been shutdown in the read direction, the error code GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return instead of an error. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20181119134228.11031-1-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-11-01websock: fix handshake leakMarc-André Lureau1-0/+1
Missed in f69a8bde293. Thanks Valgrind: ==955== 217 bytes in 1 blocks are definitely lost in loss record 275 of 321 ==955== at 0x483A965: realloc (vg_replace_malloc.c:785) ==955== by 0x50B6839: __vasprintf_chk (in /usr/lib64/libc-2.28.so) ==955== by 0x49AA05C: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.5800.1) ==955== by 0x4983440: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.5800.1) ==955== by 0x126048: qio_channel_websock_handshake_send_res (channel-websock.c:162) ==955== by 0x1266E6: qio_channel_websock_handshake_send_res_ok (channel-websock.c:362) ==955== by 0x126D3E: qio_channel_websock_handshake_process (channel-websock.c:468) ==955== by 0x126EF2: qio_channel_websock_handshake_read (channel-websock.c:511) ==955== by 0x12715B: qio_channel_websock_handshake_io (channel-websock.c:571) ==955== by 0x125027: qio_channel_fd_source_dispatch (channel-watch.c:84) ==955== by 0x496326C: g_main_context_dispatch (in /usr/lib64/libglib-2.0.so.0.5800.1) ==955== by 0x169EC3: glib_pollfds_poll (main-loop.c:215) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-06-28Delete AF_UNIX socket after closePavel Balaev1-1/+17
Since version 2.12.0 AF_UNIX socket created for QMP exchange is not deleted on instance shutdown. This is due to the fact that function qio_channel_socket_finalize() is called after qio_channel_socket_close(). Signed-off-by: Pavel Balaev <mail@void.so> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-05-20Remove unnecessary variables for function return valueLaurent Vivier1-5/+1
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci Signed-off-by: Laurent Vivier <lvivier@redhat.com> ppc part Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-03-27error: Remove NULL checks on error_propagate() callsLaurent Vivier1-3/+1
Re-run Coccinelle patch scripts/coccinelle/error_propagate_null.cocci Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20180323143202.28879-4-lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-13sockets: move fd_is_socket() into common sockets codeDaniel P. Berrange1-13/+0
The fd_is_socket() helper method is useful in a few places, so put it in the common sockets code. Make the code more compact while moving it. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2018-03-06qio: non-default context for TLS handshakePeter Xu1-11/+34
A new parameter "context" is added to qio_channel_tls_handshake() is to allow the TLS to be run on a non-default context. Still, no functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-06qio: non-default context for async connPeter Xu1-6/+9
We have worked on qio_task_run_in_thread() already. Further, let all the qio channel APIs use that context. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-06qio: non-default context for threaded qtaskPeter Xu3-6/+26
qio_task_run_in_thread() allows main thread to run blocking operations in the background. However it has an assumption on that it's always working with the default context. This patch tries to allow the threaded QIO task framework to run with non-default gcontext. Currently no functional change so far, so the QIOTasks are still always running on main context. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-06qio: store gsources for net listenersPeter Xu1-22/+36
Originally we were storing the GSources tag IDs. That'll be not enough if we are going to support non-default gcontext for QIO code. Switch to GSources without changing anything real. Now we still always pass in NULL, which means the default gcontext. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-06qio: introduce qio_channel_add_watch_{full|source}Peter Xu1-6/+34
Firstly, introduce an internal qio_channel_add_watch_full(), which enhances qio_channel_add_watch() that context can be specified. Then add a new API wrapper qio_channel_add_watch_source() to return a GSource pointer rather than a tag ID. Note that the _source() call will keep a reference of GSource so that callers need to unref them explicitly when finished using the GSource. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-06qio: rename qio_task_thread_resultPeter Xu1-2/+2
It is strange that it was called gio_task_thread_result. Rename it to follow the naming rule of the file. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster2-0/+2
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-15io/channel-command: Do not kill the child process after closing the pipeThomas Huth1-1/+11
We are currently facing some migration failure on s390x when running certain avocado-vt tests, e.g. when running the test type_specific.io-github-autotest-qemu.migrate.with_reboot.exec.gzip_exec. This test is using 'migrate -d "exec:nc localhost 5200"' for the migration. The problem is detected at the receiving side, where the migration stream apparently ends too early. However, the cause for the problem is at the sending side: After writing the migration stream into the pipe to netcat, the source QEMU calls qio_channel_command_close() which closes the pipe and immediately (!) kills the child process afterwards (via the function qio_channel_command_abort()). So if the sending netcat did not read the final bytes from the pipe yet, or if it did not manage to send out all its buffers yet, it is killed before the whole migration stream is passed to the destination side. QEMU can not know how much time is required by the child process to send over all migration data, so we should not kill it, neither directly nor after a delay. Let's simply wait for the child process to exit gracefully instead (this was also the behaviour of pclose() that was used in "exec:" migration before the QIOChannel rework). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-02-15io: Add /dev/fdset/ support to QIOChannelFileRoss Lagerwall1-3/+3
Add /dev/fdset/ support to QIOChannelFile by calling qemu_open() instead of open() and qemu_close() instead of close(). There is a subtle semantic change since qemu_open() automatically sets O_CLOEXEC, but this doesn't affect any of the users of the function. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2018-02-15io: Don't call close multiple times in QIOChannelFileRoss Lagerwall1-0/+1
If the file descriptor underlying QIOChannelFile is closed in the io_close() method, don't close it again in the finalize() method since the file descriptor number may have been reused in the meantime. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>