aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-10-22disas/nios2: Simplify endianess conversionPhilippe Mathieu-Daudé1-2/+1
Since commit 12b6e9b27d4 ("disas: Clean up CPUDebug initialization") the disassemble_info->bfd_endian enum is set for all targets in target_disas(). We can directly call print_insn_nios2() and simplify. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210807110939.95853-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-22Merge remote-tracking branch 'remotes/vivier-m68k/tags/q800-pull-request' ↵Richard Henderson1-0/+1
into staging Pull request Q800 20211022 GLUE updates for A/UX mode # gpg: Signature made Fri 22 Oct 2021 12:16:29 AM PDT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] * remotes/vivier-m68k/tags/q800-pull-request: q800: drop 8-bit graphic_depth check for Apple 21 inch display q800: add NMI handler q800: wire up remaining IRQs in classic mode q800: route SONIC on-board Ethernet IRQ via nubus IRQ 9 in classic mode q800: wire up auxmode GPIO to GLUE mac_via: add GPIO for A/UX mode q800: use GLUE IRQ numbers instead of IRQ level for GLUE IRQs q800: move VIA1 IRQ from level 1 to level 6 mac_via: update comment for VIA1B_vMystery bit Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-21Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211021' into stagingRichard Henderson5-43/+50
Introduce cpu topology support Generate DBG2 table Switch to ssize_t for elf loader return type Fixed sbsa cpu type error message typo Only initialize required submodules for edk2 Dont create device-tree node for empty NUMA node # gpg: Signature made Thu 21 Oct 2021 08:22:32 AM PDT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate] * remotes/rth/tags/pull-arm-20211021: tests/data/acpi/virt: Update the empty expected file for PPTT hw/arm/virt-acpi-build: Generate PPTT table tests/data/acpi/virt: Add an empty expected file for PPTT hw/acpi/aml-build: Add PPTT table hw/acpi/aml-build: Add Processor hierarchy node structure hw/arm/virt: Add cpu-map to device tree device_tree: Add qemu_fdt_add_path hw/arm/virt: Only describe cpu topology since virt-6.2 bios-tables-test: Generate reference table for virt/DBG2 hw/arm/virt_acpi_build: Generate DBG2 table tests/acpi: Add void table for virt/DBG2 bios-tables-test hw/elf_ops.h: switch to ssize_t for elf loader return type hw/arm/sbsa-ref: Fixed cpu type error message typo. roms/edk2: Only initialize required submodules roms/edk2: Only init brotli submodule to build BaseTools hw/arm/virt: Don't create device-tree node for empty NUMA node tests/acpi: Generate reference blob for IORT rev E.b hw/arm/virt-acpi-build: IORT upgrade up to revision E.b tests/acpi: Get prepared for IORT E.b revision upgrade Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-21hw/acpi/aml-build: Add PPTT tableAndrew Jones1-0/+3
Add the Processor Properties Topology Table (PPTT) used to describe CPU topology information to ACPI guests. Note, a DT-boot Linux guest with a non-flat CPU topology will see socket and core IDs being sequential integers starting from zero, which is different from ACPI-boot Linux guest, e.g. with -smp 4,sockets=2,cores=2,threads=1 a DT boot produces: cpu: 0 package_id: 0 core_id: 0 cpu: 1 package_id: 0 core_id: 1 cpu: 2 package_id: 1 core_id: 0 cpu: 3 package_id: 1 core_id: 1 an ACPI boot produces: cpu: 0 package_id: 36 core_id: 0 cpu: 1 package_id: 36 core_id: 1 cpu: 2 package_id: 96 core_id: 2 cpu: 3 package_id: 96 core_id: 3 This is due to several reasons: 1) DT cpu nodes do not have an equivalent field to what the PPTT ACPI Processor ID must be, i.e. something equal to the MADT CPU UID or equal to the UID of an ACPI processor container. In both ACPI cases those are platform dependant IDs assigned by the vendor. 2) While QEMU is the vendor for a guest, if the topology specifies SMT (> 1 thread), then, with ACPI, it is impossible to assign a core-id the same value as a package-id, thus it is not possible to have package-id=0 and core-id=0. This is because package and core containers must be in the same ACPI namespace and therefore must have unique UIDs. 3) ACPI processor containers are not mandatorily required for PPTT tables to be used and, due to the limitations of which IDs are selected described above in (2), they are not helpful for QEMU, so we don't build them with this patch. In the absence of them, Linux assigns its own unique IDs. The maintainers have chosen not to use counters from zero, but rather ACPI table offsets, which explains why the numbers are so much larger than with DT. 4) When there is no SMT (threads=1) the core IDs for ACPI boot guests match the logical CPU IDs, because these IDs must be equal to the MADT CPU UID (as no processor containers are present), and QEMU uses the logical CPU ID for these MADT IDs. So in summary, with QEMU as the vendor for the guests, we simply use sequential integers starting from zero for the non-leaf nodes but with ID-valid flag unset, so that guest will ignore them and use table offsets as unique container IDs. And we use logical CPU IDs for the leaf nodes with the ID-valid flag set, which will be consistent with MADT. Currently the implementation of PPTT generation complies with ACPI specification 5.2.29 (Revision 6.3). The 6.3 spec can be found at: https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf Reviewed-by: Eric Auger <eric.auger@redhat.com> Co-developed-by: Yanan Wang <wangyanan55@huawei.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20211020142125.7516-6-wangyanan55@huawei.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-20device_tree: Add qemu_fdt_add_pathYanan Wang1-0/+1
qemu_fdt_add_path() works like qemu_fdt_add_subnode(), except it also adds all missing subnodes from the given path. We'll use it in a coming patch where we will add cpu-map to the device tree. And we also tweak an error message of qemu_fdt_add_subnode(). Co-developed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andrew Jones <drjones@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211020142125.7516-3-wangyanan55@huawei.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-20hw/arm/virt: Only describe cpu topology since virt-6.2Yanan Wang1-1/+3
On existing older machine types, without cpu topology described in ACPI or DT, the guest will populate one by default. With the topology described, it will read the information and set up its topology as instructed, but that may not be the same as what was getting used by default. It's possible that an user application has a dependency on the default topology and if the default one gets changed it will probably behave differently. Based on above consideration we'd better only describe topology information to the guest on 6.2 and later machine types. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <20211020142125.7516-2-wangyanan55@huawei.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-21spapr/xive: Add source status helpersCédric Le Goater1-0/+24
and use them to set and test the ASSERTED bit of LSI sources. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211004212141.432954-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-20hw/elf_ops.h: switch to ssize_t for elf loader return typeLuc Michel2-42/+43
Until now, int was used as the return type for all the ELF loader related functions. The returned value is the sum of all loaded program headers "MemSize" fields. Because of the overflow check in elf_ops.h, trying to load an ELF bigger than INT_MAX will fail. Switch to ssize_t to remove this limitation. Signed-off-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20211014194325.19917-1-lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-20mac_via: add GPIO for A/UX modeMark Cave-Ayland1-0/+1
Add a new auxmode GPIO that is updated when port B bit 6 is changed indicating whether the hardware is configured for A/UX mode. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20211020134131.4392-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-20virtio-net: vhost control virtqueue supportJason Wang1-0/+1
This patch implements the control virtqueue support for vhost. This requires virtio-net to figure out the datapath queue pairs and control virtqueue via is_datapath and pass the number of those two types of virtqueues to vhost_net_start()/vhost_net_stop(). Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-10-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vhost: record the last virtqueue index for the virtio deviceJason Wang1-0/+2
This patch introduces a new field in the vhost_dev structure to record the last virtqueue index for the virtio device. This will be useful for the vhost backends with 1:N model to start or stop the device after all the vhost_dev structures were started or stopped. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-9-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20virtio-net: use "queue_pairs" instead of "queues" when possibleJason Wang1-2/+2
Most of the time, "queues" really means queue pairs. So this patch switch to use "queue_pairs" to avoid confusion. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-8-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vhost-net: control virtqueue supportJason Wang1-2/+4
We assume there's no cvq in the past, this is not true when we need control virtqueue support for vhost-user backends. So this patch implements the control virtqueue support for vhost-net. As datapath, the control virtqueue is also required to be coupled with the NetClientState. The vhost_net_start/stop() are tweaked to accept the number of datapath queue pairs plus the the number of control virtqueue for us to start and stop the vhost device. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-7-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20net: introduce control clientJason Wang1-0/+5
This patch introduces a boolean for the device has control queue which can accepts control command via network queue. The first user would be the control virtqueue support for vhost. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-6-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vhost-vdpa: classify one time requestJason Wang1-0/+1
Vhost-vdpa uses one device multiqueue queue (pairs) model. So we need to classify the one time request (e.g SET_OWNER) and make sure those request were only called once per device. This is used for multiqueue support. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-3-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vhost-user-rng: Add vhost-user-rng implementationMathieu Poirier1-0/+33
Introduce a random number generator (RNG) backend that communicates with a vhost-user server to retrieve entropy. That way other VMM that comply with the vhost user protocl can use the same vhost-user daemon without having to write yet another RNG driver. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Message-Id: <20211012205904.4106769-2-mathieu.poirier@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20virtio-iommu: Drop base_name and change generic_nameEric Auger1-1/+1
Drop base_name and turn generic_name into "virtio-iommu-pci". This is more in line with other modern-only devices. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20211013191755.767468-3-eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vdpa: Check for iova range at mappings changesEugenio Pérez1-0/+2
Check vdpa device range before updating memory regions so we don't add any outside of it, and report the invalid change if any. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20211014141236.923287-4-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-10-18vt82c686: Add a method to VIA_ISA to raise ISA interruptsBALATON Zoltan1-0/+4
Other functions in the VT82xx chips need to raise ISA interrupts. Keep a reference to them in the device state and add via_isa_set_irq() to allow setting their state. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <778c04dc2c8affac060b8edf9e8d7dab3c3e04eb.1634259980.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-10-15Revert "cpu: Move cpu_common_props to hw/core/cpu.c"Richard Henderson1-0/+1
This reverts commit 1b36e4f5a5de585210ea95f2257839c2312be28f. Despite a comment saying why cpu_common_props cannot be placed in a file that is compiled once, it was moved anyway. Revert that. Since then, Property is not defined in hw/core/cpu.h, so it is now easier to declare a function to install the properties rather than the Property array itself. Cc: Eduardo Habkost <ehabkost@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-15block-backend: update blk_co_pwrite() and blk_co_pread() wrappersVladimir Sementsov-Ogievskiy1-2/+6
Make bytes argument int64_t to be consistent with modern block-layer. Callers should be OK with it as type becomes wider. What is inside functions? - Conversion from int64_t to size_t. Still, we can't have a buffer larger than SIZE_MAX, therefore bytes should not be larger than SIZE_MAX as well. Add an assertion. - Passing to blk_co_pwritev() / blk_co_preadv() which already has int64_t bytes argument. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211007175243.642516-2-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: spelling fix] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: fix blk_co_flush prototype to mention coroutine_fnVladimir Sementsov-Ogievskiy1-1/+1
We already have this marker for the blk_co_flush function declaration in block/block-backend.c. Add it in the header too. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211007175243.642516-1-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: wording tweak] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: convert blk_aio_ functions to int64_t bytes paramterVladimir Sementsov-Ogievskiy1-2/+2
1. Convert bytes in BlkAioEmAIOCB: aio->bytes is only passed to already int64_t interfaces, and set in blk_aio_prwv, which is updated here. 2. For all updated functions the parameter type becomes wider so callers are safe. 3. In blk_aio_prwv we only store bytes to BlkAioEmAIOCB, which is updated here. 4. Other updated functions are wrappers on blk_aio_prwv. Note that blk_aio_preadv and blk_aio_pwritev become safer: before this commit, it's theoretically possible to pass qiov with size exceeding INT_MAX, which than converted to int argument of blk_aio_prwv. Now it's converted to int64_t which is a lot better. Still add assertions. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211006131718.214235-11-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: tweak assertion and grammar] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: convert blk_co_copy_range to int64_t bytesVladimir Sementsov-Ogievskiy1-1/+1
Function is updated so that parameter type becomes wider, so all callers should be OK with it. Look at blk_co_copy_range() itself: bytes is passed only to blk_check_byte_request() and bdrv_co_copy_range(), which already have int64_t bytes parameter, so we are OK. Note that requests exceeding INT_MAX are still restricted by blk_check_byte_request(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211006131718.214235-10-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: convert blk_foo wrappers to use int64_t bytes parameterVladimir Sementsov-Ogievskiy1-3/+3
Convert blk_pdiscard, blk_pwrite_compressed, blk_pwrite_zeroes. These are just wrappers for functions with int64_t argument, so allow passing int64_t as well. Parameter type becomes wider so all callers should be OK with it. Note that requests exceeding INT_MAX are still restricted by blk_check_byte_request(). Note also that we don't (and are not going to) convert blk_pwrite and blk_pread: these functions return number of bytes on success, so to update them, we should change return type to int64_t as well, which will lead to investigating and updating all callers which is too much. So, blk_pread and blk_pwrite remain unchanged. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211006131718.214235-9-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: convert blk_co_pdiscard to int64_t bytesVladimir Sementsov-Ogievskiy1-1/+2
We updated blk_do_pdiscard() and its wrapper blk_co_pdiscard(). Both functions are updated so that the parameter type becomes wider, so all callers should be OK with it. Look at blk_do_pdiscard(): bytes is passed only to blk_check_byte_request() and bdrv_co_pdiscard(), which already have int64_t bytes parameter, so we are OK. Note that requests exceeding INT_MAX are still restricted by blk_check_byte_request(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211006131718.214235-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: convert blk_co_pwritev_part to int64_t bytesVladimir Sementsov-Ogievskiy1-3/+3
We convert blk_do_pwritev_part() and some wrappers: blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes(). All functions are converted so that the parameter type becomes wider, so all callers should be OK with it. Look at blk_do_pwritev_part() body: bytes is passed to: - trace_blk_co_pwritev (we update it here) - blk_check_byte_request, throttle_group_co_io_limits_intercept, bdrv_co_pwritev_part - all already have int64_t argument. Note that requests exceeding INT_MAX are still restricted by blk_check_byte_request(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211006131718.214235-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15block-backend: make blk_co_preadv() 64bitVladimir Sementsov-Ogievskiy1-1/+1
For both updated functions, the type of bytes becomes wider, so all callers should be OK with it. blk_co_preadv() only passes its arguments to blk_do_preadv(). blk_do_preadv() passes bytes to: - trace_blk_co_preadv, which is updated too - blk_check_byte_request, throttle_group_co_io_limits_intercept, bdrv_co_preadv, which are already int64_t. Note that requests exceeding INT_MAX are still restricted by blk_check_byte_request(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211006131718.214235-3-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-10-15qdev: Base object creation on QDict rather than QemuOptsKevin Wolf3-6/+11
QDicts are both what QMP natively uses and what the keyval parser produces. Going through QemuOpts isn't useful for either one, so switch the main device creation function to QDicts. By sharing more code with the -object/object-add code path, we can even reduce the code size a bit. This commit doesn't remove the detour through QemuOpts from any code path yet, but it allows the following commits to do so. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-15-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15virtio-net: Store failover primary opts pointer locallyKevin Wolf1-0/+1
Instead of accessing the global QemuOptsList, which really belong to the command line parser and shouldn't be accessed from devices, store a pointer to the QemuOpts in a new VirtIONet field. This is not the final state, but just an intermediate step to get rid of QemuOpts in devices. It will later be replaced with an options QDict. Before this patch, two "primary" devices could be hidden for the same standby device, but only one of them would actually be enabled and the other one would be kept hidden forever, so this doesn't make sense. After this patch, configuring a second primary device is an error. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-13-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15qdev: Add Error parameter to hide_device() callbacksKevin Wolf1-2/+6
hide_device() is used for virtio-net failover, where the standby virtio device delays creation of the primary device. It only makes sense to have a single primary device for each standby device. Adding a second one should result in an error instead of hiding it and never using it afterwards. Prepare for this by adding an Error parameter to the hide_device() callback where virtio-net is informed about adding a primary device. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-12-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15softmmu/qdev-monitor: add error handling in qdev_set_idDamien Hedde1-1/+24
qdev_set_id() is mostly used when the user adds a device (using -device cli option or device_add qmp command). This commit adds an error parameter to handle the case where the given id is already taken. Also document the function and add a return value in order to be able to capture success/failure: the function now returns the id in case of success, or NULL in case of failure. The commit modifies the 2 calling places (qdev-monitor and xen-legacy-backend) to add the error object parameter. Note that the id is, right now, guaranteed to be unique because all ids came from the "device" QemuOptsList where the id is used as key. This addition is a preparation for a future commit which will relax the uniqueness. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-10-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15qdev: Make DeviceState.id independent of QemuOptsKevin Wolf2-2/+2
DeviceState.id is a pointer to a string that is stored in the QemuOpts object DeviceState.opts and freed together with it. We want to create devices without going through QemuOpts in the future, so make this a separately allocated string. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211008133442.141332-9-kwolf@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15net: Introduce NetClientInfo.check_peer_type()Kevin Wolf1-0/+2
Some network backends (vhost-user and vhost-vdpa) work only with specific devices. At startup, they second guess what the command line option handling will do and error out if they think a non-virtio device will attach to them. This second guessing is not only ugly, it can lead to wrong error messages ('-device floppy,netdev=foo' should complain about an unknown property, not about the wrong kind of network device being attached) and completely ignores hotplugging. Add a callback where backends can check compatibility with a device when it actually tries to attach, even on hotplug. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-2-kwolf@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-13Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211013' into stagingRichard Henderson3-319/+245
Use MO_128 for 16-byte atomic memory operations. Add cpu_ld/st_mmu memory primitives. Move helper_ld/st memory helpers out of tcg.h. Canonicalize alignment flags in MemOp. # gpg: Signature made Wed 13 Oct 2021 10:48:45 AM PDT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate] * remotes/rth/tags/pull-tcg-20211013: tcg: Canonicalize alignment flags in MemOp tcg: Move helper_*_mmu decls to tcg/tcg-ldst.h target/arm: Use cpu_*_mmu instead of helper_*_mmu target/sparc: Use cpu_*_mmu instead of helper_*_mmu target/s390x: Use cpu_*_mmu instead of helper_*_mmu target/mips: Use 8-byte memory ops for msa load/store target/mips: Use cpu_*_data_ra for msa load/store accel/tcg: Move cpu_atomic decls to exec/cpu_ldst.h accel/tcg: Add cpu_{ld,st}*_mmu interfaces target/hexagon: Implement cpu_mmu_index target/s390x: Use MO_128 for 16 byte atomics target/ppc: Use MO_128 for 16 byte atomics target/i386: Use MO_128 for 16 byte atomics target/arm: Use MO_128 for 16 byte atomics memory: Log access direction for invalid accesses Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-13tcg: Move helper_*_mmu decls to tcg/tcg-ldst.hRichard Henderson2-71/+74
These functions have been replaced by cpu_*_mmu as the most proper interface to use from target code. Hide these declarations from code that should not use them. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-13accel/tcg: Move cpu_atomic decls to exec/cpu_ldst.hRichard Henderson2-87/+87
The previous placement in tcg/tcg.h was not logical. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-13accel/tcg: Add cpu_{ld,st}*_mmu interfacesRichard Henderson1-161/+84
These functions are much closer to the softmmu helper functions, in that they take the complete MemOpIdx, and from that they may enforce required alignment. The previous cpu_ldst.h functions did not have alignment info, and so did not enforce it. Retain this by adding MO_UNALN to the MemOp that we create in calling the new functions. Note that we are not yet enforcing alignment for user-only, but we now have the information with which to do so. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-13hw/i386/sgx: Move qmp_query_sgx() and hmp_info_sgx() to hw/i386/sgx.cPhilippe Mathieu-Daudé1-11/+0
Move qmp_query_sgx() and hmp_info_sgx() from target/i386/monitor.c to hw/i386/sgx.c, removing the sgx_get_info() indirection and the "hw/i386/sgx.h" header. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211007175612.496366-5-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-13hw/i386/sgx: Move qmp_query_sgx_capabilities() to hw/i386/sgx.cPhilippe Mathieu-Daudé1-1/+0
Move qmp_query_sgx_capabilities() from target/i386/monitor.c to hw/i386/sgx.c, removing the sgx_get_capabilities() indirection. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211007175612.496366-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-13hw/i386/sgx: Have sgx_epc_get_section() return a booleanPhilippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211007175612.496366-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-13monitor: Reduce hmp_info_sev() declarationPhilippe Mathieu-Daudé2-1/+1
While being conditionally used for TARGET_I386 in hmp-commands-info.hx, hmp_info_sev() is declared for all targets. Reduce its declaration to target including "monitor/hmp-target.h". This is a minor cleanup. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211007161716.453984-23-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-13target/i386/sev: Declare system-specific functions in 'sev.h'Philippe Mathieu-Daudé1-28/+0
"sysemu/sev.h" is only used from x86-specific files. Let's move it to include/hw/i386, and merge it with target/i386/sev.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211007161716.453984-16-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-12Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-121021-2' ↵Richard Henderson1-6/+0
into staging Some testing and plugin updates: - don't override the test compiler when specified - split some multiarch tests by guest OS - add riscv64 docker image and cross-compile tests - drop release tarball test from Travis - skip check-patch on master repo - fix passing of TEST_TARGETS to cirrus - fix missing symbols in plugins - ensure s390x insn start ops precede plugin instrumentation - refactor plugin instruction boundary detection - update github repo lockdown - add a debian-native test image for multi-arch builds # gpg: Signature made Tue 12 Oct 2021 02:35:00 AM PDT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] * remotes/stsquad/tags/pull-for-6.2-121021-2: tests/docker: add a debian-native image and make available .github: move repo lockdown to the v2 configuration accel/tcg: re-factor plugin_inject_cb so we can assert insn_idx is valid target/s390x: move tcg_gen_insn_start to s390x_tr_insn_start plugins/: Add missing functions to symbol list gitlab: fix passing of TEST_TARGETS env to cirrus gitlab: skip the check-patch job on the upstream repo travis.yml: Remove the "Release tarball" job gitlab: Add cross-riscv64-system, cross-riscv64-user tests/docker: promote debian-riscv64-cross to a full image tests/tcg: move some multiarch files and make conditional tests/tcg/sha1: remove endian include configure: don't override the selected host test compiler if defined Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-12accel/tcg: re-factor plugin_inject_cb so we can assert insn_idx is validAlex Bennée1-6/+0
Coverity doesn't know enough about how we have arranged our plugin TCG ops to know we will always have incremented insn_idx before injecting the callback. Let us assert it for the benefit of Coverity and protect ourselves from accidentally breaking the assumption and triggering harder to grok errors deeper in the code if we attempt a negative indexed array lookup. However to get to this point we re-factor the code and remove the second hand instruction boundary detection in favour of scanning the full set of ops and using the existing INDEX_op_insn_start to cleanly detect when the instruction has started. As we no longer need the plugin specific list of ops we delete that. My initial benchmarks shows no discernible impact of dropping the plugin specific ops list. Fixes: Coverity 1459509 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210917162332.3511179-12-alex.bennee@linaro.org>
2021-10-12hw/arm: Integrate ADC model into Aspeed SoCAndrew Jeffery1-0/+2
Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211005052604.1674891-3-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12hw/adc: Add basic Aspeed ADC modelAndrew Jeffery1-0/+55
This model implements enough behaviour to do basic functionality tests such as device initialisation and read out of dummy sample values. The sample value generation strategy is similar to the STM ADC already in the tree. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> [clg : support for multiple engines (AST2600) ] Signed-off-by: Cédric Le Goater <clg@kaod.org> [pdel : refactored engine register struct fields to regs[] array field] [pdel : added guest-error checking for upper-8 channel regs in AST2600] [pdel : allow 16-bit reads of the channel data registers] Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211005052604.1674891-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12hw: aspeed_gpio: Fix GPIO array indexingPeter Delevoryas1-3/+2
The gpio array is declared as a dense array: qemu_irq gpios[ASPEED_GPIO_NR_PINS]; (AST2500 has 228, AST2400 has 216, AST2600 has 208) However, this array is used like a matrix of GPIO sets (e.g. gpio[NR_SETS][NR_PINS_PER_SET] = gpio[8][32]) size_t offset = set * GPIOS_PER_SET + gpio; qemu_set_irq(s->gpios[offset], !!(new & mask)); This can result in an out-of-bounds access to "s->gpios" because the gpio sets do _not_ have the same length. Some of the groups (e.g. GPIOAB) only have 4 pins. 228 != 8 * 32 == 256. To fix this, I converted the gpio array from dense to sparse, to that match both the hardware layout and this existing indexing code. Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211008033501.934729-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12aspeed/i2c: QOMify AspeedI2CBusCédric Le Goater1-2/+6
Introduce an AspeedI2CBus SysBusDevice model and attach the associated memory region and IRQ to the newly instantiated objects. Before this change, the I2C bus IRQs were all attached to the SysBusDevice model of the I2C controller. Adapt the AST2600 SoC realize routine to take into account this change. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12aspeed/smc: Remove unused attribute 'irqline'Cédric Le Goater1-1/+0
Signed-off-by: Cédric Le Goater <clg@kaod.org>
generated by cgit v1.1 at 2024-12-28 21:25:22 +0000