aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2023-05-30hw/arm/smmuv3: Add CMDs related to stage-2Mostafa Saleh1-0/+1
CMD_TLBI_S2_IPA: As S1+S2 is not enabled, for now this can be the same as CMD_TLBI_NH_VAA. CMD_TLBI_S12_VMALL: Added new function to invalidate TLB by VMID. For stage-1 only commands, add a check to throw CERROR_ILL if used when stage-1 is not supported. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-9-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Add VMID to TLB taggingMostafa Saleh1-2/+3
Allow TLB to be tagged with VMID. If stage-1 is only supported, VMID is set to -1 and ignored from STE and CMD_TLBI_NH* cmds. Update smmu_iotlb_insert trace event to have vmid. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-8-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Parse STE config for stage-2Mostafa Saleh2-0/+4
Parse stage-2 configuration from STE and populate it in SMMUS2Cfg. Validity of field values are checked when possible. Only AA64 tables are supported and Small Translation Tables (STT) are not supported. According to SMMUv3 UM(IHI0070E) "5.2 Stream Table Entry": All fields with an S2 prefix (with the exception of S2VMID) are IGNORED when stage-2 bypasses translation (Config[1] == 0). Which means that VMID can be used(for TLB tagging) even if stage-2 is bypassed, so we parse it unconditionally when S2P exists. Otherwise it is set to -1.(only S1P) As stall is not supported, if S2S is set the translation would abort. For S2R, we reuse the same code used for stage-1 with flag record_faults. However when nested translation is supported we would need to separate stage-1 and stage-2 faults. Fix wrong shift in STE_S2HD, STE_S2HA, STE_S2S. Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230516203327.2051088-6-smostafa@google.com [PMM: fixed format string] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Refactor stage-1 PTWMostafa Saleh1-3/+13
In preparation for adding stage-2 support, rename smmu_ptw_64 to smmu_ptw_64_s1 and refactor some of the code so it can be reused in stage-2 page table walk. Remove AA64 check from PTW as decode_cd already ensures that AA64 is used, otherwise it faults with C_BAD_CD. A stage member is added to SMMUPTWEventInfo to differentiate between stage-1 and stage-2 ptw faults. Add stage argument to trace_smmu_ptw_level be consistent with other trace events. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-4-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Update translation config to hold stage-2Mostafa Saleh1-3/+19
In preparation for adding stage-2 support, add a S2 config struct(SMMUS2Cfg), composed of the following fields and embedded in the main SMMUTransCfg: -tsz: Size of IPA input region (S2T0SZ) -sl0: Start level of translation (S2SL0) -affd: AF Fault Disable (S2AFFD) -record_faults: Record fault events (S2R) -granule_sz: Granule page shift (based on S2TG) -vmid: Virtual Machine ID (S2VMID) -vttb: Address of translation table base (S2TTB) -eff_ps: Effective PA output range (based on S2PS) They will be used in the next patches in stage-2 address translation. The fields in SMMUS2Cfg, are reordered to make the shared and stage-1 fields next to each other, this reordering didn't change the struct size (104 bytes before and after). Stage-1 only fields: aa64, asid, tt, ttb, tbi, record_faults, oas. oas is stage-1 output address size. However, it is used to check input address in case stage-1 is unimplemented or bypassed according to SMMUv3 manual IHI0070.E "3.4. Address sizes" Shared fields: stage, disabled, bypassed, aborted, iotlb_*. No functional change intended. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-3-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30fsl-imx6: Add SNVS support for i.MX6 boardsVitaly Cheptsov1-0/+2
SNVS is supported on both i.MX6 and i.MX6UL and is needed to support shutdown on the board. Cc: Peter Maydell <peter.maydell@linaro.org> (odd fixer:SABRELITE / i.MX6) Cc: Jean-Christophe Dubois <jcd@tribudubois.net> (reviewer:SABRELITE / i.MX6) Cc: qemu-arm@nongnu.org (open list:SABRELITE / i.MX6) Cc: qemu-devel@nongnu.org (open list:All patches CC here) Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru> Message-id: 20230515095015.66860-1-cheptsov@ispras.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-29Merge tag 'pull-ppc-20230528' of https://gitlab.com/danielhb/qemu into stagingRichard Henderson2-2/+4
ppc patch queue for 2023-05-28: This queue includes several assorted fixes for PowerPC SPR emulation, a change in the default Pegasos2 CPU, the addition of AIL mode 3 for spapr, a PIC->CPU interrupt fix for prep and performance enhancements in fpu_helper.c. # -----BEGIN PGP SIGNATURE----- # # iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZHOFiRYcZGFuaWVsaGI0 # MTNAZ21haWwuY29tAAoJEDzZypbeAzFkVZ0BAMV+9RlHKRlldOSPMEWCWo6hmA/U # 9SMyJsZPY3OpDbE3AP9XOQR1boqyT5MJXoeOUq1OLlFm6mY7UA300kBZ7wxVCw== # =IGNT # -----END PGP SIGNATURE----- # gpg: Signature made Sun 28 May 2023 09:47:05 AM PDT # gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164 # gpg: issuer "danielhb413@gmail.com" # gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164 * tag 'pull-ppc-20230528' of https://gitlab.com/danielhb/qemu: ppc/pegasos2: Change default CPU to 7457 target/ppc: Add POWER9 DD2.2 model target/ppc: Merge COMPUTE_CLASS and COMPUTE_FPRF pnv_lpc: disable reentrancy detection for lpc-hc target/ppc: Use SMT4 small core chip type in POWER9/10 PVRs hw/ppc/prep: Fix wiring of PIC -> CPU interrupt spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall target/ppc: Alignment faults do not set DSISR in ISA v3.0 onward target/ppc: Fix width of some 32-bit SPRs target/ppc: Fix fallback to MFSS for MFFS* instructions on pre 3.0 ISAs Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-28target/ppc: Add POWER9 DD2.2 modelNicholas Piggin1-1/+1
POWER9 DD2.1 and earlier had significant limitations when running KVM, including lack of "mixed mode" MMU support (ability to run HPT and RPT mode on threads of the same core), and a translation prefetch issue which is worked around by disabling "AIL" mode for the guest. These processors are not widely available, and it's difficult to deal with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU and make it the default POWER9 CPU. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20230515160201.394587-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-28spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcallNicholas Piggin1-1/+3
The behaviour of the Address Translation Mode on Interrupt resource is not consistently supported by all CPU versions or all KVM versions: KVM HV does not support mode 2, and does not support mode 3 on POWER7 or early POWER9 processesors. KVM PR only supports mode 0. TCG supports all modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode. This leads to inconsistencies in guest behaviour and could cause problems migrating guests. This was not noticable for Linux guests for a long time because the kernel only uses modes 0 and 3, and it used to consider AIL-3 to be advisory in that it would always keep the AIL-0 vectors around, so it did not matter whether or not interrupts were delivered according to the AIL mode. Recent Linux guests depend on AIL mode 3 working as specified in order to support the SCV facility interrupt. If AIL-3 can not be provided, then H_SET_MODE must return an error to Linux so it can disable the SCV facility (failure to do so can lead to userspace being able to crash the guest kernel). Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0 is implied as the baseline, and AIL-2 is no longer supported by spapr. AIL-2 is not known to be used by any software, but support in TCG could be restored with an ail-mode-2 capability quite easily if a regression is reported. Modify the H_SET_MODE Address Translation Mode on Interrupt resource handler to check capabilities and correctly return error if not supported. KVM has a cap to advertise support for AIL-3. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230515160216.394612-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-28ui: add helpers for virtio-multitouch eventsSergio Lopez1-0/+5
Add helpers for generating Multi-touch events from the UI backends that can be sent to the guest through a virtio-multitouch device. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230526112925.38794-6-slp@redhat.com>
2023-05-28virtio-input: add a virtio-mulitouch deviceSergio Lopez1-4/+5
Add a virtio-multitouch device to the family of devices emulated by virtio-input implementing the Multi-touch protocol as descripted here: https://www.kernel.org/doc/html/latest/input/multi-touch-protocol.html?highlight=multi+touch This patch just add the device itself, without connecting it to any backends. The following patches will add a PCI-based multitouch device, some helpers in "ui" and will enable the GTK3 backend to transpose multi-touch events from the host to the guest. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230526112925.38794-4-slp@redhat.com>
2023-05-28ui: add the infrastructure to support MT eventsSergio Lopez1-0/+3
Add the required infrastructure to support generating multitouch events. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230526112925.38794-3-slp@redhat.com>
2023-05-28ui/cursor: make width/height unsigned 16-bit integerMauro Matteo Cascella1-2/+2
Although not actually exploitable at the moment, a negative width/height could make datasize wrap around and potentially lead to buffer overflow. Since there is no reason a negative width/height is ever appropriate, modify QEMUCursor struct and cursor_alloc prototype to accept uint16_t. This protects us against accidentally introducing future bugs. Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com> Reported-by: Jacek Halon <jacek.halon@gmail.com> Reported-by: Yair Mizrahi <yairh33@gmail.com> Reported-by: Elsayed El-Refa'ei <e.elrefaei99@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230523163023.608121-1-mcascell@redhat.com>
2023-05-28win32: wrap socket close() with an exception handlerMarc-André Lureau1-0/+4
Since commit abe34282 ("win32: avoid mixing SOCKET and file descriptor space"), we set HANDLE_FLAG_PROTECT_FROM_CLOSE on the socket FD, to prevent closing the HANDLE with CloseHandle. This raises an exception which under gdb is fatal, and qemu exits. Let's catch the expected error instead. Note: this appears to work, but the mingw64 macro is not well documented or tested, and it's not obvious how it is meant to be used. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230515132440.1025315-1-marcandre.lureau@redhat.com>
2023-05-25Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingRichard Henderson1-0/+3
* hot-unplug fixes for ioport * purge qatomic_mb_read/set from monitor * build system fixes * OHCI fix from gitlab * provide EPYC-Rome CPU model not susceptible to XSAVES erratum # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj # bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU # LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u # CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr # 3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D # na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A== # =A5Lp # -----END PGP SIGNATURE----- # gpg: Signature made Thu 25 May 2023 01:21:37 AM PDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: monitor: do not use mb_read/mb_set monitor: extract request dequeuing to a new function monitor: introduce qmp_dispatcher_co_wake monitor: cleanup fetching of QMP requests monitor: cleanup detection of qmp_dispatcher_co shutting down monitor: do not use mb_read/mb_set for suspend_cnt monitor: add more *_locked() functions monitor: allow calling monitor_resume under mon_lock monitor: use QEMU_LOCK_GUARD a bit more softmmu/ioport.c: make MemoryRegionPortioList owner of portio_list MemoryRegions softmmu/ioport.c: QOMify MemoryRegionPortioList softmmu/ioport.c: allocate MemoryRegionPortioList ports on the heap usb/ohci: Set pad to 0 after frame update meson: move -no-pie from linker to compiler meson: fix rule for qemu-ga installer meson.build: Fix glib -Wno-unused-function workaround target/i386: EPYC-Rome model without XSAVES Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-25monitor: add more *_locked() functionsPaolo Bonzini1-0/+3
Allow flushing and printing to the monitor while mon->mon_lock is held. This will help cleaning up the locking of mon->mux_out and mon->suspend_cnt. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-23tcg: Remove DEBUG_DISASRichard Henderson1-3/+0
This had been set since the beginning, is never undefined, and it would seem to be harmful to debugging to do so. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23tcg: Split out tcg/debug-assert.hRichard Henderson2-8/+18
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23accel/tcg: Remove cpu_atomic_{ld,st}o_*_mmuRichard Henderson1-9/+0
Atomic load/store of 128-byte quantities is now handled by cpu_{ld,st}16_mmu. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23accel/tcg: Unify cpu_{ld,st}*_{be,le}_mmuRichard Henderson1-46/+12
With the current structure of cputlb.c, there is no difference between the little-endian and big-endian entry points, aside from the assert. Unify the pairs of functions. The only use of the functions with explicit endianness was in target/sparc64, and that was only to satisfy the assert: the correct endianness is already built into memop. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23include/qemu: Move CONFIG_ATOMIC128_OPT handling to atomic128.hRichard Henderson1-0/+17
Not only the routines in ldst_atomicity.c.inc need markup, but also the ones in the headers. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23include/host: Split out atomic128-ldst.hRichard Henderson1-73/+1
Separates the aarch64-specific portion into its own file. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23include/host: Split out atomic128-cas.hRichard Henderson1-54/+1
Separates the aarch64-specific portion into its own file. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23Merge tag 'mem-2023-05-23' of https://github.com/davidhildenbrand/qemu into ↵Richard Henderson3-1/+5
staging Hi, "Host Memory Backends" and "Memory devices" queue ("mem"): - New "offset" option for memory-backend-file # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmRs0h4RHGRhdmlkQHJl # ZGhhdC5jb20ACgkQTd4Q9wD/g1r+9BAAsOtioPE3y1xBNyLhO+sbBK4w0Xf5ABRF # QXfrSPfz0IaThzg33o7eCUMrbC5UmRyeq1aeGWFNo1RevgKxeFFlcVdvUFDeJL5R # vS94ZzowpJ6lJvpgP8iOMmWY2nztWpIfE92nLKIeze5nlbnMwKn8ZlVWkqFialkT # Ro1AI/ZmyvUDJj8UXQEW+p1NWE4m59TH5atQqBG3kkU7RJTU4DKVQtKbOysEwIhr # A4y0nvgMeHLlEPUSqcERe9wOqVENdlsON6vms5AILN4/TmjSe3BHINjH9NOFveiO # wgquSt0ystPAY0MXRPXgg6XwL1AAFR9cJt/rOZiBYpqeZHAmKOsi5qUXyv2dmXhw # RaPV041g2RJZiFgH1N4v4aN0j8AYbtHSYYsP1snfULa8VfePPquY/UxyPaK28WHn # on5VV5nBScYNVtKI90Gci4jxGStnM0zG503GQ26pt85+35866zertBqsTTPIO2Mm # 7+YSkedSzmIt11GH0rqdghQte6qj1ED8lGO626s5m+qbGL9WuBXYCG9yzl5yTLsz # I27si7Fh/Y0QQHs3GEAH2tsi89tphElnZksdj4P1/uPDIDnTF7d5I+tlUiQXHNaw # rXAV76q4j0GgbBm4Cp1iMTUNxALes4aOG7oRMeFxvVWy0fqmfAvKhDVILGkUlYTr # C82GUJ5x3mc= # =izHP # -----END PGP SIGNATURE----- # gpg: Signature made Tue 23 May 2023 07:47:58 AM PDT # gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A # gpg: issuer "david@redhat.com" # gpg: Good signature from "David Hildenbrand <david@redhat.com>" [unknown] # gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [undefined] # gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A * tag 'mem-2023-05-23' of https://github.com/davidhildenbrand/qemu: hostmem-file: add offset option Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-23hostmem-file: add offset optionAlexander Graf3-1/+5
Add an option for hostmem-file to start the memory object at an offset into the target file. This is useful if multiple memory objects reside inside the same target file, such as a device node. In particular, it's useful to map guest memory directly into /dev/mem for experimentation. To make this work consistently, also fix up all places in QEMU that expect fd offsets to be 0. Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20230403221421.60877-1-graf@amazon.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-05-23igb: Strip the second VLAN tag for extended VLANAkihiko Odaki1-2/+2
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement Rx SCTP CSOAkihiko Odaki2-1/+4
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Always add VLAN tagAkihiko Odaki1-2/+2
It is possible to have another VLAN tag even if the packet is already tagged. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Use void pointersAkihiko Odaki1-2/+2
The uses of uint8_t pointers were misleading as they are never accessed as an array of octets and it even require more strict alignment to access as struct eth_header. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000x: Take CRC into consideration for size checkAkihiko Odaki1-0/+2
Section 13.7.15 Receive Length Error Count says: > Packets over 1522 bytes are oversized if LongPacketEnable is 0b > (RCTL.LPE). If LongPacketEnable (LPE) is 1b, then an incoming packet > is considered oversized if it exceeds 16384 bytes. > These lengths are based on bytes in the received packet from > <Destination Address> through <CRC>, inclusively. As QEMU processes packets without CRC, the number of bytes for CRC need to be subtracted. This change adds some size definitions to be used to derive the new size thresholds to eth.h. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Rename eth_setup_vlan_headers_exAkihiko Odaki1-8/+1
The old eth_setup_vlan_headers has no user so remove it and rename eth_setup_vlan_headers_ex. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols()Akihiko Odaki1-3/+3
igb does not properly ensure the buffer passed to net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header. Allow it to pass scattered data to net_rx_pkt_set_protocols(). Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-22Merge tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu into ↵Richard Henderson3-1/+3
staging * First batch of fixes to allow "make check" with "--without-default-devices" * Enable the "bios bits" avocado test in the gitlab-CI * Another minor fix for the redundancy DMA blocker code # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRrVhoRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbUaiRAApPVveet6WPQ7Ag1448LtqHTGiwl8x2Ba # jQ7FTKhqdTC5O+/BU7IQkvGmErPxCc8WPB7eoowwBVA/4dr8YIIBLKqO4RtP6LXs # rtUkzsPI9ExW+iJjIMVOmHsp/shlRhuf+Tmlr8OsTObecCeA4Vbxc+RlvYXfCPhM # 8tOuLO8n6LQY/62fgXSzI5WlLQSzIo3aDSmCeWa1QHkPLf6itvGkwsNBytMJLoUT # pXZnBNqlXiuyPtloLp+DMfRRkpq8AHB04+Sri7TVPxi7bJL28RMZiaAXpvHSFLz8 # JR2ApRrzBthiLMK1I6A0c2ZGCbVOAi1dhNDNqWCyx8ZBASEJj0XuT/+Qse81sKmG # zNXr57x0CzWAJ59/taBM2hjUks10rJOmxHJYxS6i1JJR7u1zTuvii7toPMmf35zX # bM7TYjKpYGa2HneHpw1eOjpTgUYZpgla/pVXZhKqoGdfmseBMlFU424MNl/xDRng # bxuam3Ku+ClOeQlzXt8aceL/gTApJfvy5FAIAK5yUOQDTs6HjJJL2AfcOzss8kXb # k6IMHgV1tnLed8B7K4iml2rzvk+RT3CPGvmaNwSAkdh8SnE5/bv1I6s4fHiXMlvC # mmfvFSoWwdhcsD5r+XOFxfke8sGrOeQIXKefp6UL3hYVV7o2NUe89BytXZCzut/Y # 6ulR25HHtmI= # =m1Px # -----END PGP SIGNATURE----- # gpg: Signature made Mon 22 May 2023 04:46:34 AM PDT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined] # gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2023-05-22' of https://gitlab.com/thuth/qemu: memory: stricter checks prior to unsetting engaged_in_io acpi/tests/avocado/bits: enable bios bits avocado tests on gitlab CI pipeline .gitlab-ci.d/buildtest.yml: Run full "make check" with --without-default-devices tests/qemu-iotests/172: Run QEMU with -vga none and -nic none tests/qtest/meson.build: Run the net filter tests only with default devices tests/qtest: Check for the availability of virtio-ccw devices before using them tests/qtest/virtio-ccw-test: Remove superfluous tests tests/qtest/cdrom-test: Fix the test to also work without optional devices tests/qtest/usb-hcd-uhci-test: Skip test if UHCI controller is not available tests/qtest/readconfig-test: Check for the availability of USB controllers hw/sparc64/sun4u: Use MachineClass->default_nic and MachineClass->no_parallel hw/i386: Ignore the default parallel port if it has not been compiled into QEMU hw/char/parallel: Move TYPE_ISA_PARALLEL to the header file hw/sh4: Use MachineClass->default_nic in the sh4 r2d machine hw/s390x: Use MachineClass->default_nic in the s390x machine hw/ppc: Use MachineClass->default_nic in the ppc machines softmmu/vl.c: Disable default NIC if it has not been compiled into the binary hw: Move the default NIC machine class setting from the x86 to the generic one softmmu/vl.c: Check for the availability of the VGA device before using it hw/i386/Kconfig: ISAPC works fine without VGA_ISA Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-22Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into stagingRichard Henderson4-10/+26
Block layer patches - qcow2 spec: Rename "zlib" compression to "deflate" - Honour graph read lock even in the main thread + prerequisite fixes - aio-posix: do not nest poll handlers (fixes infinite recursion) - Refactor QMP blockdev transactions - graph-lock: Disable locking for now - iotests/245: Check if 'compress' driver is available # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRnrxURHGt3b2xmQHJl # ZGhhdC5jb20ACgkQfwmycsiPL9aHyw/9H0xpceVb0kcC5CStOWCcq4PJHzkl/8/m # c6ABFe0fgEuN2FCiKiCKOt6+V7qaIAw0+YLgPr/LGIsbIBzdxF3Xgd2UyIH6o4dK # bSaIAaes6ZLTcYGIYEVJtHuwNgvzhjyBlW5qqwTpN0YArKS411eHyQ3wlUkCEVwK # ZNmDY/MC8jq8r1xfwpPi7CaH6k1I6HhDmyl1PdURW9hmoAKZQZMhEdA5reJrUwZ9 # EhfgbLIaK0kkLLsufJ9YIkd+b/P3mUbH30kekNMOiA0XlnhWm1Djol5pxlnNiflg # CGh6CAyhJKdXzwV567cSF11NYCsFmiY+c/l0xRIGscujwvO4iD7wFT5xk2geUAKV # yaox8JA7Le36g7lO2CRadlS24/Ekqnle6q09g2i8s2tZwB4fS286vaZz6QDPmf7W # VSQp9vuDj6ZcVjMsuo2+LzF3yA2Vqvgd9s032iBAjRDSGLAoOdQZjBJrreypJ0Oi # pVFwgK+9QNCZBsqVhwVOgElSoK/3Vbl1kqpi30Ikgc0epAn0suM1g2QQPJ2Zt/MJ # xqMlTv+48OW3vq3ebr8GXqkhvG/u0ku6I1G6ZyCrjOce89osK8QUaovERyi1eOmo # ouoZ8UJJa6VfEkkmdhq2vF6u/MP4PeZ8MW3pYQy6qEnSOPDKpLnR30Z/s/HZCZcm # H4QIbfQnzic= # =edNP # -----END PGP SIGNATURE----- # gpg: Signature made Fri 19 May 2023 10:17:09 AM PDT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] * tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (21 commits) iotests: Test commit with iothreads and ongoing I/O nbd/server: Fix drained_poll to wake coroutine in right AioContext graph-lock: Disable locking for now tested: add test for nested aio_poll() in poll handlers aio-posix: do not nest poll handlers iotests/245: Check if 'compress' driver is available graph-lock: Honour read locks even in the main thread blockjob: Adhere to rate limit even when reentered early test-bdrv-drain: Call bdrv_co_unref() in coroutine context test-bdrv-drain: Take graph lock more selectively qemu-img: Take graph lock more selectively qcow2: Unlock the graph in qcow2_do_open() where necessary block/export: Fix null pointer dereference in error path block: Call .bdrv_co_create(_opts) unlocked docs/interop/qcow2.txt: fix description about "zlib" clusters blockdev: qmp_transaction: drop extra generic layer blockdev: use state.bitmap in block-dirty-bitmap-add action blockdev: transaction: refactor handling transaction properties blockdev: qmp_transaction: refactor loop to classic for blockdev: transactions: rename some things ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-22hw/char/parallel: Move TYPE_ISA_PARALLEL to the header fileThomas Huth1-0/+2
We are going to require the macro from other files, too, so move this #define to the header file. Message-Id: <20230512124033.502654-9-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-22hw: Move the default NIC machine class setting from the x86 to the generic oneThomas Huth2-1/+1
We are going to re-use this setting for other targets, so let's move this to the main MachineClass. Message-Id: <20230512124033.502654-4-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-19Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson9-7/+35
into staging virtio,pc,pci: fixes, features, cleanups CXL volatile memory support More memslots for vhost-user on x86 and ARM. vIOMMU support for vhost-vdpa pcie-to-pci bridge can now be compiled out MADT revision bumped to 3 Fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE # ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x # +aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9 # dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm # 4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE # mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I= # =ajmR # -----END PGP SIGNATURE----- # gpg: Signature made Fri 19 May 2023 07:36:26 AM PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (40 commits) hw/i386/pc: No need for rtc_state to be an out-parameter hw/i386/pc: Create RTC controllers in south bridges hw/cxl: Introduce cxl_device_get_timestamp() utility function hw/cxl: rename mailbox return code type from ret_code to CXLRetCode hw/pci-bridge: make building pcie-to-pci bridge configurable virtio-pci: add handling of PCI ATS and Device-TLB enable/disable hw/pci-host/pam: Make init_pam() usage more readable hw/i386/pc: Initialize ram_memory variable directly hw/i386/pc_{q35,piix}: Minimize usage of get_system_memory() hw/i386/pc_{q35,piix}: Reuse MachineClass::desc as SMB product name hw/i386/pc_q35: Reuse machine parameter hw/pci-host/q35: Inline sysbus_add_io() hw/pci-host/i440fx: Inline sysbus_add_io() vhost-vdpa: Add support for vIOMMU. vhost-vdpa: Add check for full 64-bit in region delete vhost_vdpa: fix the input in trace_vhost_vdpa_listener_region_del() vhost: expose function vhost_dev_has_iommu() virtio-crypto: fix NULL pointer dereference in virtio_crypto_free_request virtio-net: not enable vq reset feature unconditionally vhost-user: Remove acpi-specific memslot limit ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-19nbd/server: Fix drained_poll to wake coroutine in right AioContextKevin Wolf1-0/+10
nbd_drained_poll() generally runs in the main thread, not whatever iothread the NBD server coroutine is meant to run in, so it can't directly reenter the coroutines to wake them up. The code seems to have the right intention, it specifies the correct AioContext when it calls qemu_aio_coroutine_enter(). However, this functions doesn't schedule the coroutine to run in that AioContext, but it assumes it is already called in the home thread of the AioContext. To fix this, add a new thread-safe qio_channel_wake_read() that can be called in the main thread to wake up the coroutine in its AioContext, and use this in nbd_drained_poll(). Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230517152834.277483-3-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-19blockjob: Adhere to rate limit even when reentered earlyKevin Wolf1-4/+10
When jobs are sleeping, for example to enforce a given rate limit, they can be reentered early, in particular in order to get paused, to update the rate limit or to get cancelled. Before this patch, they behave in this case as if they had fully completed their rate limiting delay. This means that requests are sped up beyond their limit, violating the constraints that the user gave us. Change the block jobs to sleep in a loop until the necessary delay is completed, while still allowing cancelling them immediately as well pausing (handled by the pause point in job_sleep_ns()) and updating the rate limit. This change is also motivated by iotests cases being prone to fail because drain operations pause and unpause them so often that block jobs complete earlier than they are supposed to. In particular, the next commit would fail iotests 030 without this change. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230510203601.418015-8-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-19block: Call .bdrv_co_create(_opts) unlockedKevin Wolf2-6/+6
These are functions that modify the graph, so they must be able to take a writer lock. This is impossible if they already hold the reader lock. If they need a reader lock for some of their operations, they should take it internally. Many of them go through blk_*(), which will always take the lock itself. Direct calls of bdrv_*() need to take the reader lock. Note that while locking for bdrv_co_*() calls is checked by TSA, this is not the case for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required when they are called from coroutine context like here! This effectively reverts 4ec8df0183, but adds some internal locking instead. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230510203601.418015-2-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-19hw/i386/pc: No need for rtc_state to be an out-parameterBernhard Beschow1-1/+1
Now that the RTC is created as part of the southbridges it doesn't need to be an out-parameter any longer. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230519084734.220480-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/i386/pc: Create RTC controllers in south bridgesBernhard Beschow2-0/+5
Just like in the real hardware (and in PIIX4), create the RTC controllers in the south bridges. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230519084734.220480-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: Introduce cxl_device_get_timestamp() utility functionIra Weiny1-0/+2
There are new users of this functionality coming shortly so factor it out from the GET_TIMESTAMP mailbox command handling. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230423162013.4535-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19virtio-pci: add handling of PCI ATS and Device-TLB enable/disableViktor Prutyanov1-0/+2
According to PCIe Address Translation Services specification 5.1.3., ATS Control Register has Enable bit to enable/disable ATS. Guest may enable/disable PCI ATS and, accordingly, Device-TLB for the VirtIO PCI device. So, raise/lower a flag and call a trigger function to pass this event to a device implementation. Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Message-Id: <20230512135122.70403-2-viktor@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/pci-host/pam: Make init_pam() usage more readableBernhard Beschow1-2/+3
Unlike pam_update() which takes the subject -- PAMMemoryRegion -- as first argument, init_pam() takes it as fifth (!) argument. This makes it quite hard to figure out what an init_pam() invocation actually initializes. By moving the subject to the front this should become clearer. While at it, lower the DeviceState parameter to Object, also communicating more clearly that this parameter is just the owner rather than some (heavy?) dependency. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230213162004.2797-8-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/i386/pc: Initialize ram_memory variable directlyBernhard Beschow1-1/+0
Going through pc_memory_init() seems quite complicated for a simple assignment. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230213162004.2797-7-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19vhost-vdpa: Add support for vIOMMU.Cindy Lu1-0/+11
1. The vIOMMU support will make vDPA can work in IOMMU mode. This will fix security issues while using the no-IOMMU mode. To support this feature we need to add new functions for IOMMU MR adds and deletes. Also since the SVQ does not support vIOMMU yet, add the check for IOMMU in vhost_vdpa_dev_start, if the SVQ and IOMMU enable at the same time the function will return fail. 2. Skip the iova_max check vhost_vdpa_listener_skipped_section(). While MR is IOMMU, move this check to vhost_vdpa_iommu_map_notify() Verified in vp_vdpa and vdpa_sim_net driver Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20230510054631.2951812-5-lulu@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19vhost: expose function vhost_dev_has_iommu()Cindy Lu1-0/+1
To support vIOMMU in vdpa, need to exposed the function vhost_dev_has_iommu, vdpa will use this function to check if vIOMMU enable. Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20230510054631.2951812-2-lulu@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/pci: Disable PCI_ERR_UNCOR_MASK register for machine type < 8.0Leonardo Bras1-0/+2
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK set for machine types < 8.0 will cause migration to fail if the target QEMU version is < 8.0.0 : qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0 qemu-system-x86_64: Failed to load PCIDevice:config qemu-system-x86_64: Failed to load e1000e:parent_obj qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e' qemu-system-x86_64: load of migration failed: Invalid argument The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0, with this cmdline: ./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX] In order to fix this, property x-pcie-err-unc-mask was introduced to control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by default, but is disabled if machine type <= 7.2. Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Leonardo Bras <leobras@redhat.com> Message-Id: <20230503002701.854329-1-leobras@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576 Tested-by: Fiona Ebner <f.ebner@proxmox.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)Gregory Price1-3/+8
This commit enables each CXL Type-3 device to contain one volatile memory region and one persistent region. Two new properties have been added to cxl-type3 device initialization: [volatile-memdev] and [persistent-memdev] The existing [memdev] property has been deprecated and will default the memory region to a persistent memory region (although a user may assign the region to a ram or file backed region). It cannot be used in combination with the new [persistent-memdev] property. Partitioning volatile memory from persistent memory is not yet supported. Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info. Signed-off-by: Gregory Price <gregory.price@memverge.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-01-18 11:05:23 +0000