aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-11-05piix4: Rename PIIX4 object to piix4-isaHervé Poussineau1-0/+2
Other piix4 parts are already named piix4-ide and piix4-usb-uhci. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20171216090228.28505-15-hpoussin@reactos.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Esteban Bosse <estebanbosse@gmail.com> [PMD: rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05Revert "irq: introduce qemu_irq_proxy()"Philippe Mathieu-Daudé1-5/+0
This function isn't used anymore. This reverts commit 22ec3283efba9ba0792790da786d6776d83f2a92. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Esteban Bosse <estebanbosse@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2019-11-05piix4: Add an i8259 Interrupt Controller as specified in datasheetHervé Poussineau1-1/+0
Add ISA irqs as piix4 gpio in, and CPU interrupt request as piix4 gpio out. Remove i8259 instanciated in malta board, to not have it twice. We can also remove the now unused piix4_init() function. Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20171216090228.28505-8-hpoussin@reactos.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> [PMD: rebased, updated includes, use ISA_NUM_IRQS in for loop] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-01target/arm/cpu64: max cpu: Introduce sve<N> propertiesAndrew Jones1-0/+1
Introduce cpu properties to give fine control over SVE vector lengths. We introduce a property for each valid length up to the current maximum supported, which is 2048-bits. The properties are named, e.g. sve128, sve256, sve384, sve512, ..., where the number is the number of bits. See the updates to docs/arm-cpu-features.rst for a description of the semantics and for example uses. Note, as sve-max-vq is still present and we'd like to be able to support qmp_query_cpu_model_expansion with guests launched with e.g. -cpu max,sve-max-vq=8 on their command lines, then we do allow sve-max-vq and sve<N> properties to be provided at the same time, but this is not recommended, and is why sve-max-vq is not mentioned in the document. If sve-max-vq is provided then it enables all lengths smaller than and including the max and disables all lengths larger. It also has the side-effect that no larger lengths may be enabled and that the max itself cannot be disabled. Smaller non-power-of-two lengths may, however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a guest the vector lengths 128, 256, and 512 bits. This patch has been co-authored with Richard Henderson, who reworked the target/arm/cpu64.c changes in order to push all the validation and auto-enabling/disabling steps into the finalizer, resulting in a nice LOC reduction. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Beata Michalska <beata.michalska@linaro.org> Message-id: 20191031142734.8590-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-31bootdevice: FW_CFG interface for LCHS valuesSam Eiderman1-0/+1
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS. Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometries directly we are able to support such "exotic" disks. We serialize this information in a similar way to the "bootorder" interface. The new fw_cfg entry is "bios-geometry". Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31scsi: Propagate unrealize() callback to scsi-hdSam Eiderman1-0/+1
We will need to add LCHS removal logic to scsi-hd's unrealize() in the next commit. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31bootdevice: Add interface to gather LCHSSam Eiderman1-0/+3
Add an interface to provide direct logical CHS values for boot devices. We will use this interface in the next commits. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31block: Support providing LCHS from userSam Eiderman1-1/+5
Add logical geometry variables to BlockConf. A user can now supply "lcyls", "lheads" & "lsecs" for any HD device that supports CHS ("cyls", "heads", "secs"). These devices include: * ide-hd * scsi-hd * virtio-blk-pci In future commits we will use the provided LCHS and pass it to the BIOS through fw_cfg to be supplied using INT13 routines. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31block: Refactor macros - fix tabbingSam Eiderman1-8/+8
Fixing tabbing in block related macros. Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-30Merge remote-tracking branch ↵Peter Maydell18-37/+1004
'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging TCG Plugins initial implementation - use --enable-plugins @ configure - low impact introspection (-plugin empty.so to measure overhead) - plugins cannot alter guest state - example plugins included in source tree (tests/plugins) - -d plugin to enable plugin output in logs - check-tcg runs extra tests when plugins enabled - documentation in docs/devel/plugins.rst # gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits) travis.yml: enable linux-gcc-debug-tcg cache MAINTAINERS: add me for the TCG plugins code scripts/checkpatch.pl: don't complain about (foo, /* empty */) .travis.yml: add --enable-plugins tests include/exec: wrap cpu_ldst.h in CONFIG_TCG accel/stubs: reduce headers from tcg-stub tests/plugin: add hotpages to analyse memory access patterns tests/plugin: add instruction execution breakdown tests/plugin: add a hotblocks plugin tests/tcg: enable plugin testing tests/tcg: drop test-i386-fprem from TESTS when not SLOW tests/tcg: move "virtual" tests to EXTRA_TESTS tests/tcg: set QEMU_OPTS for all cris runs tests/tcg/Makefile.target: fix path to config-host.mak tests/plugin: add sample plugins linux-user: support -plugin option vl: support -plugin option plugin: add qemu_plugin_outs helper plugin: add qemu_plugin_insn_disas helper plugin: expand the plugin_init function to include an info block ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29net/virtio: add failover supportJens Freimann2-0/+13
This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29migration: add new migration state wait-unplugJens Freimann1-0/+2
This patch adds a new migration state called wait-unplug. It is entered after the SETUP state if failover devices are present. It will transition into ACTIVE once all devices were succesfully unplugged from the guest. So if a guest doesn't respond or takes long to honor the unplug request the user will see the migration state 'wait-unplug'. In the migration thread we query failover devices if they're are still pending the guest unplug. When all are unplugged the migration continues. If one device won't unplug migration will stay in wait_unplug state. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191029114905.6856-9-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29migration: allow unplug during migration for failover devicesJens Freimann1-0/+1
In "b06424de62 migration: Disable hotplug/unplug during migration" we added a check to disable unplug for all devices until we have figured out what works. For failover primary devices qdev_unplug() is called from the migration handler, i.e. during migration. This patch adds a flag to DeviceState which is set to false for all devices and makes an exception for PCI devices that are also primary devices in a failover pair. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-8-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29pci: mark devices partially unpluggedJens Freimann1-0/+1
Only the guest unplug request was triggered. This is needed for the failover feature. In case of a failed migration we need to plug the device back to the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-4-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29pci: add option for net failoverJens Freimann1-0/+3
This patch adds a failover_pair_id property to PCIDev which is used to link the primary device in a failover pair (the PCI dev) to a standby (a virtio-net-pci) device. It only supports ethernet devices. Also currently it only supports PCIe devices. The requirement for PCIe is because it doesn't support other hotplug controllers at the moment. The failover functionality can be added to other hotplug controllers like ACPI, SHCP,... later on. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-3-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29qdev/qbus: add hidden device supportJens Freimann1-0/+29
This adds support for hiding a device to the qbus and qdev APIs. The first user of this will be the virtio-net failover feature but the API introduced with this patch could be used to implement other features as well, for example hiding pci devices when a pci bus is powered off. qdev_device_add() is modified to check for a failover_pair_id argument in the option string. A DeviceListener callback should_be_hidden() is added. It can be used by a standby device to inform qdev that this device should not be added now. The standby device handler can store the device options to plug the device in at a later point in time. One reason for hiding the device is that we don't want to expose both devices to the guest kernel until the respective virtio feature bit VIRTIO_NET_F_STANDBY was negotiated and we know that the devices will be handled correctly by the guest. More information on the kernel feature this is using: https://www.kernel.org/doc/html/latest/networking/net_failover.html An example where the primary device is a vfio-pci device and the standby device is a virtio-net device: A device is hidden when it has an "failover_pair_id" option, e.g. -device virtio-net-pci,...,failover=on,... -device vfio-pci,...,failover_pair_id=net1,... Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-2-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell3-0/+9
staging # gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: COLO-compare: Fix incorrect `if` logic virtio-net: prevent offloads reset on migration virtio: new post_load hook net: add tulip (dec21143) driver Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' ↵Peter Maydell6-0/+363
into staging Add Macintosh Quadra 800 machine in hw/m68k # gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-branch-pull-request: BootLinuxConsoleTest: Test the Quadra 800 hw/m68k: define Macintosh Quadra 800 hw/m68k: add a dummy SWIM floppy controller hw/m68k: add Nubus macfb video card hw/m68k: add Nubus support hw/m68k: implement ADB bus support for via hw/m68k: add VIA support dp8393x: manage big endian bus esp: add pseudo-DMA as used by Macintosh esp: move get_cmd() post-DMA code to get_cmd_cb() esp: move handle_ti_cmd() cleanup code to esp_do_dma(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20191028' into stagingPeter Maydell3-12/+31
Improvements for TARGET_PAGE_BITS_VARY Fix for TCI ld16u_i64. Fix for segv on icount execute from i/o memory. Two misc cleanups. # gpg: Signature made Mon 28 Oct 2019 14:55:08 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20191028: translate-all: Remove tb_alloc translate-all: fix uninitialized tb->orig_tb cputlb: Fix tlb_vaddr_to_host exec: Cache TARGET_PAGE_MASK for TARGET_PAGE_BITS_VARY exec: Promote TARGET_PAGE_MASK to target_long exec: Restrict TARGET_PAGE_BITS_VARY assert to CONFIG_DEBUG_TCG exec: Use const alias for TARGET_PAGE_BITS_VARY configure: Detect compiler support for __attribute__((alias)) exec: Split out variable page size support to exec-vary.c cpu: use ROUND_UP() to define xxx_PAGE_ALIGN cputlb: ensure _cmmu helper functions follow the naming standard tci: Add implementation for INDEX_op_ld16u_i64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29virtio-net: prevent offloads reset on migrationMikhail Sennikovsky1-0/+2
Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-29virtio: new post_load hookMichael S. Tsirkin1-0/+6
Post load hook in virtio vmsd is called early while device is processed, and when VirtIODevice core isn't fully initialized. Most device specific code isn't ready to deal with a device in such state, and behaves weirdly. Add a new post_load hook in a device class instead. Devices should use this unless they specifically want to verify the migration stream as it's processed, e.g. for bounds checking. Cc: qemu-stable@nongnu.org Suggested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-29net: add tulip (dec21143) driverSven Schnelle1-0/+1
This adds the basic functionality to emulate a Tulip NIC. Implemented are: - RX and TX functionality - Perfect Frame Filtering - Big/Little Endian descriptor support - 93C46 EEPROM support - LXT970 PHY Not implemented, mostly because i had no OS using these functions: - Imperfect frame filtering - General Purpose Timer - Transmit automatic polling - Boot ROM support - SIA interface - Big/Little Endian data buffer conversion Successfully tested with the following Operating Systems: - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers - HPPA Linux - Windows XP - HP-UX Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191022155413.4619-1-svens@stackframe.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-28Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf2' ↵Peter Maydell3-11/+19
into staging RISC-V Patches for the 4.2 Soft Freeze, Part 2 This patch set contains a handful of small fixes for RISC-V targets that I'd like to target for the 4.2 soft freeze. They include: * A fix to allow the debugger to access the state of all privilege modes, as opposed to just the currently executing one. * A pair of cleanups to implement cpu_do_transaction_failed. * Fixes to the device tree. * The addition of various memory regions to make the sifive_u machine more closely match the HiFive Unleashed board. * Fixes to our GDB interface to allow CSRs to be accessed. * A fix to a memory leak pointed out by coverity. * A fix that prevents PMP checks from firing incorrectly. This passes "make chcek" and boots Open Embedded for me. # gpg: Signature made Mon 28 Oct 2019 15:47:52 GMT # gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41 # gpg: issuer "palmer@dabbelt.com" # gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41 * remotes/palmer/tags/riscv-for-master-4.2-sf2: target/riscv: PMP violation due to wrong size parameter riscv/boot: Fix possible memory leak target/riscv: Make the priv register writable by GDB target/riscv: Expose "priv" register for GDB for reads target/riscv: Tell gdbstub the correct number of CSRs riscv/virt: Jump to pflash if specified riscv/virt: Add the PFlash CFI01 device riscv/virt: Manually define the machine riscv/sifive_u: Add the start-in-flash property riscv/sifive_u: Manually define the machine riscv/sifive_u: Add QSPI memory region riscv/sifive_u: Add L2-LIM cache memory linux-user/riscv: Propagate fault address riscv: sifive_u: Add ethernet0 to the aliases node riscv: hw: Drop "clock-frequency" property of cpu nodes RISC-V: Implement cpu_do_transaction_failed RISC-V: Handle bus errors in the page table walker riscv: Skip checking CSR privilege level in debugger mode Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28hw/m68k: add a dummy SWIM floppy controllerLaurent Vivier1-0/+76
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of the 680x0 Macintosh. This patch introduces only the basic support: it allows to switch from IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux driver happy. It cannot read any floppy image. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191026164546.30020-10-laurent@vivier.eu>
2019-10-28hw/m68k: add Nubus macfb video cardLaurent Vivier1-0/+64
This patch adds support for a graphic framebuffer device. This device can be added as a sysbus device or as a NuBus device. It is accessed as a framebuffer but the color palette can be set. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
2019-10-28hw/m68k: add Nubus supportLaurent Vivier2-0/+93
This patch adds basic support for the NuBus bus. This is used by 680x0 Macintosh. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20191026164546.30020-8-laurent@vivier.eu>
2019-10-28hw/m68k: implement ADB bus support for viaLaurent Vivier1-0/+7
VIA needs to be able to poll the ADB interface and to read/write data from/to the bus. This patch adds functions allowing that. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20191026164546.30020-7-laurent@vivier.eu>
2019-10-28hw/m68k: add VIA supportLaurent Vivier1-0/+108
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used to interface the keyboard, Mouse, and real-time clock. It also provides control line for the floppy disk driver, video interface, sound circuitry and serial interface. This implementation is based on the MOS6522 object. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
2019-10-28esp: add pseudo-DMA as used by MacintoshLaurent Vivier1-0/+15
There is no DMA in Quadra 800, so the CPU reads/writes the data from the PDMA register (offset 0x100, ESP_PDMA in hw/m68k/q800.c) and copies them to/from the memory. There is a nice assembly loop in the kernel to do that, see linux/drivers/scsi/mac_esp.c:MAC_ESP_PDMA_LOOP(). The start of the transfer is triggered by the DREQ interrupt (see linux mac_esp_send_pdma_cmd()), the CPU polls on the IRQ flag to start the transfer after a SCSI command has been sent (in Quadra 800 it goes through the VIA2, the via2-irq line and the vIFR register) The Macintosh hardware includes hardware handshaking to prevent the CPU from reading invalid data or writing data faster than the peripheral device can accept it. This is the "blind mode", and from the doc: "Approximate maximum SCSI transfer rates within a blocks are 1.4 MB per second for blind transfers in the Macintosh II" Some references can be found in: Apple Macintosh Family Hardware Reference, ISBN 0-201-19255-1 Guide to the Macintosh Family Hardware, ISBN-0-201-52405-8 Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20191026164546.30020-4-laurent@vivier.eu>
2019-10-28include/exec: wrap cpu_ldst.h in CONFIG_TCGAlex Bennée1-0/+2
This gets around a build problem with --disable-tcg. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin: add qemu_plugin_outs helperAlex Bennée2-0/+7
Having the plugins grab stdout and spew stuff there is a bit ugly and certainly makes the tests look ugly. Provide a hook back into QEMU which can be redirected as needed. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
2019-10-28plugin: add qemu_plugin_insn_disas helperAlex Bennée2-0/+11
Give the plugins access to the QEMU dissasembler so they don't have to re-invent the wheel. We generate a warning when there are spare bytes in the decode buffer. This is usually due to the front end loading in more bytes than decoded. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin: expand the plugin_init function to include an info blockAlex Bennée1-2/+24
This provides a limited amount of info to plugins about the guest system that will allow them to make some additional decisions on setup. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-10-28translator: add translator_ld{ub,sw,uw,l,q}Emilio G. Cota2-1/+72
We don't bother with replicating the fast path (tlb_hit) of the old cpu_ldst helpers as it has no measurable effect on performance. This probably indicates we should consider flattening the whole set of helpers but that is out of scope for this change. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: directly plumb into softmmu/user helpers] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28cputlb: ensure _cmmu helper functions follow the naming standardAlex Bennée1-2/+2
We document this in docs/devel/load-stores.rst so lets follow it. The 32 bit and 64 bit access functions have historically not included the sign so we leave those as is. We also introduce some signed helpers which are used for loading immediate values in the translator. Fixes: 282dffc8 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin-gen: add plugin_insn_appendEmilio G. Cota1-0/+14
By adding it to plugin-gen's header file, we can export is as an inline, since tcg.h is included in the header (we need tcg_ctx). Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: use g_byte_array] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28*-user: plugin syscallsEmilio G. Cota1-0/+40
To avoid too much duplication add a wrapper that the existing trace and the new plugin calls can live in. We could move the -strace code here as well but that is left for a future series as the code is subtly different between the bsd and linux. Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [AJB: wrap in syscall-trace.h, expand commit msg] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-10-28plugins: implement helpers for resolving hwaddrAlex Bennée2-0/+48
We need to keep a local per-cpu copy of the data as other threads may be running. Currently we can provide insight as to if the access was IO or not and give the offset into a given device (usually the main RAMBlock). We store enough information to get details such as the MemoryRegion which might be useful in later expansions to the API. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28tcg: let plugins instrument virtual memory accessesEmilio G. Cota3-27/+34
To capture all memory accesses we need hook into all the various helper functions that are involved in memory operations as well as the injected inline helper calls. A later commit will allow us to resolve the actual guest HW addresses by replaying the lookup. Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: drop haddr handling, just deal in vaddr] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin-gen: add module for TCG-related codeEmilio G. Cota4-0/+60
We first inject empty instrumentation from translator_loop. After translation, we go through the plugins to see what they want to register for, filling in the empty instrumentation. If if turns out that some instrumentation remains unused, we remove it. This approach supports the following features: - Inlining TCG code for simple operations. Note that we do not export TCG ops to plugins. Instead, we give them a C API to insert inlined ops. So far we only support adding an immediate to a u64, e.g. to count events. - "Direct" callbacks. These are callbacks that do not go via a helper. Instead, the helper is defined at run-time, so that the plugin code is directly called from TCG. This makes direct callbacks as efficient as possible; they are therefore used for very frequent events, e.g. memory callbacks. - Passing the host address to memory callbacks. Most of this is implemented in a later patch though. - Instrumentation of memory accesses performed from helpers. See the corresponding comment, as well as a later patch. Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: add alloc_tcg_plugin_context, use glib, rm hwaddr] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28cputlb: introduce get_page_addr_code_hostpEmilio G. Cota1-0/+38
This will be used by plugins to get the host address of instructions. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28cputlb: document get_page_addr_codeEmilio G. Cota1-3/+21
Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28queue: add QTAILQ_REMOVE_SEVERALEmilio G. Cota1-0/+10
This is faster than removing elements one by one. Will gain a user soon. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin: add implementation of the apiAlex Bennée1-3/+0
[AJB: split from the core code commit] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin: add core codeEmilio G. Cota2-0/+261
Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: moved directory and merged various fixes] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28plugin: add user-facing APIEmilio G. Cota1-0/+351
Add the API first to ease review. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28cpu: introduce cpu_in_exclusive_context()Emilio G. Cota1-0/+13
Suggested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: moved inside start/end_exclusive fns + cleanup] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28trace: add mmu_index to mem_infoAlex Bennée2-12/+9
We are going to re-use mem_info later for plugins and will need to track the mmu_idx for softmmu code. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-10-28riscv/virt: Add the PFlash CFI01 deviceAlistair Francis1-0/+3
Add the CFI01 PFlash to the RISC-V virt board. This is the same PFlash from the ARM Virt board and the implementation is based on the ARM Virt board. This allows users to specify flash files from the command line. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/virt: Manually define the machineAlistair Francis1-1/+6
Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to use the machine object to create RISCVVirtState. This is required to add children and aliases to the machine. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.1 at 2025-01-08 15:59:31 +0000