aboutsummaryrefslogtreecommitdiff
path: root/include/qemu/log.h
AgeCommit message (Collapse)AuthorFilesLines
2016-11-01log: Add locking to large logging blocksRichard Henderson1-0/+16
Reuse the existing locking provided by stdio to keep in_asm, cpu, op, op_opt, op_ind, and out_asm as contiguous blocks. While it isn't possible to interleave e.g. in_asm or op_opt logs because of the TB lock protecting all code generation, it is possible to interleave cpu logs, or to interleave a cpu dump with an out_asm dump. For mingw32, we appear to have no viable solution for this. The locking functions are not properly exported from the system runtime library. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-08-05tcg: Lower indirect registers in a separate passRichard Henderson1-0/+1
Rather than rely on recursion during the middle of register allocation, lower indirect registers to loads and stores off the indirect base into plain temps. For an x86_64 host, with sufficient registers, this results in identical code, modulo the actual register assignments. For an i686 host, with insufficient registers, this means that temps can be (temporarily) spilled to the stack in order to satisfy an allocation. This as opposed to the possibility of not being able to spill, to allocate a register for the indirect base, in order to perform a spill. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-08-05tcg: Include liveness info in the dumpsRichard Henderson1-1/+1
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-06-20log: Fix qemu_set_log_filename() error handlingMarkus Armbruster1-1/+1
When qemu_set_log_filename() detects an invalid file name, it reports an error, closes the log file (if any), and starts logging to stderr (unless daemonized or nothing is being logged). This is wrong. Asking for an invalid log file on the command line should be fatal. Asking for one in the monitor should fail without messing up an existing logfile. Fix by converting qemu_set_log_filename() to Error. Pass it &error_fatal, except for hmp_logfile report errors. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20log: Fix qemu_set_dfilter_ranges() error reportingMarkus Armbruster1-1/+1
g_error() is not an acceptable way to report errors to the user: $ qemu-system-x86_64 -dfilter 1000+0 ** (process:17187): ERROR **: Failed to parse range in: 1000+0 Trace/breakpoint trap (core dumped) g_assert() isn't, either: $ qemu-system-x86_64 -dfilter 1000x+64 ** ERROR:/work/armbru/qemu/util/log.c:180:qemu_set_dfilter_ranges: assertion failed: (e == range_op) Aborted (core dumped) Convert qemu_set_dfilter_ranges() to Error. Rework its deeply nested control flow. Touch up the error messages. Call it with &error_fatal. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-05-19log: do not use CONFIG_USER_ONLYPaolo Bonzini1-15/+2
This decouples logging further from config-target.h Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-31log: move qemu_log_close/qemu_log_flush from header to log.cDenis V. Lunev1-17/+5
There is no particular reason to keep these functions in the header. Suggested by Paolo. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1458128212-4197-3-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-22qemu-log: dfilter-ise exec, out_asm, op and opt_opAlex Bennée1-0/+15
This ensures the code generation debug code will honour -dfilter if set. For the "exec" tracing I've added a new inline macro for efficiency's sake. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aureL32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-8-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22qemu-log: new option -dfilter to limit outputAlex Bennée1-0/+2
When debugging big programs or system emulation sometimes you want both the verbosity of cpu,exec et all but don't want to generate lots of logs for unneeded stuff. This patch adds a new option -dfilter which allows you to specify interesting address ranges in the form: -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,... Then logging code can use the new qemu_log_in_addr_range() function to decide if it will output logging information for the given range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22qemu-log: Avoid function call for disabled qemu_log_mask loggingPeter Maydell1-3/+10
Make qemu_log_mask() a macro which only calls the function to do the actual work if the logging is enabled. This avoids making a function call in possible fast paths where logging is disabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-6/+0
* Asynchronous dump-guest-memory from Peter * improved logging with -D -daemonize from Dimitris * more address_space_* optimization from Gonglei * TCG xsave/xrstor thinko fix * chardev bugfix and documentation patch # gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: target-i386: fix confusion in xcr0 bit position vs. mask chardev: Properly initialize ChardevCommon components memory: Remove unreachable return statement memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length exec: store RAMBlock pointer into memory region log: Redirect stderr to logfile if deamonized dump-guest-memory: add qmp event DUMP_COMPLETED Dump: add hmp command "info dump" Dump: add qmp command "query-dump" DumpState: adding total_size and written_size fields dump-guest-memory: add "detach" support dump-guest-memory: disable dump when in INMIGRATE state dump-guest-memory: introduce dump_process() helper function. dump-guest-memory: add dump_in_progress() helper function dump-guest-memory: using static DumpState, add DumpStatus dump-guest-memory: add "detach" flag for QMP/HMP interfaces. dump-guest-memory: cleanup: removing dump_{error|cleanup}(). scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)" qemu-options.hx: Improve documentation of chardev multiplexing mode Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23include: Clean up includesPeter Maydell1-4/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. NB: If this commit breaks compilation for your out-of-tree patchseries or fork, then you need to make sure you add #include "qemu/osdep.h" to any new .c files that you have. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-22log: Redirect stderr to logfile if deamonizedDimitris Aragiorgis1-6/+0
In case of daemonize, use the logfile passed with the -D option in order to redirect stderr to it instead of /dev/null. Also remove some unused code in log.h. Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Message-Id: <1455795518-19205-1-git-send-email-dimara@arrikto.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-03trace: convert stderr backend to logPaolo Bonzini1-0/+1
[Also update .travis.yml --enable-trace-backends=stderr --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-10-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini1-59/+0
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-17user: introduce "-d page"Paolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17qemu-log: introduce qemu_log_separatePaolo Bonzini1-0/+7
In some cases, the same message is printed both on stderr and in the log. Avoid duplicate output in the default case where stderr _is_ the log, and standardize this to stderr+log where it used to use stdio+log. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04qemu-log: remove -d ioportPaolo Bonzini1-1/+0
It was disabled at compile-time, and is now replaced by tracepoints. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19cpu-exec: Add "nochain" debug flagRichard Henderson1-0/+1
Respect it to avoid linking TBs together. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite1-2/+2
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov1-0/+1
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber1-5/+21
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber1-1/+1
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-14log.h: Supply missing includesMarkus Armbruster1-0/+3
<stdio.h> has always been missing. Rest missed in commit eeacee4. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com> Message-id: 1370610036-10577-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell1-2/+6
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-23qemu-log: Remove qemu_log_try_set_file() and its usersPeter Maydell1-8/+0
Remove the function qemu_log_try_set_file() and its users (which are all in TCG code generation functions for various targets). This function was added to abstract out code which was originally written as "if (!logfile) logfile = stderr;" in order that BUG: case code which did an unguarded "fprintf(logfile, ...)" would not crash if debug logging was not enabled. Since those direct uses of logfile have also been abstracted away into qemu_log() calls which check for a NULL logfile, there is no need for the target-* files to mess with the user's chosen logging settings. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename CPULogItem, cpu_log_items to QEMULogItem, qemu_log_itemsPeter Maydell1-3/+3
Rename the typedef CPULogItem and the public array cpu_log_items to names that better reflect the fact that the qemu_log functionality isn't restricted to TCG CPU debug logs any more. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename the public-facing cpu_set_log function to qemu_set_logPeter Maydell1-4/+8
Rename the public-facing function cpu_set_log to qemu_set_log. This requires us to rename the internal-only qemu_set_log() to do_qemu_set_log(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename cpu_str_to_log_mask to qemu_str_to_log_maskPeter Maydell1-1/+1
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since the qemu_log functionality is no longer restricted to TCG CPU debug logging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Abstract out "print usage message about valid log categories"Peter Maydell1-0/+5
Abstract out the "print a human readable list of all the valid log categories" functionality which is currently duplicated in three separate places. (We leave the monitor.c help_cmd() implementation as-is since it wants to send the message to the monitor and add its own information.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Unify {cpu_set,set_cpu}_log_filename as qemu_set_log_filenamePeter Maydell1-1/+1
The qemu_log() functionality is no longer specific to TCG CPU debug logs. Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the pointless wrapper set_cpu_log_filename(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-0/+160
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2025-02-12 11:48:23 +0000