aboutsummaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-1/+1
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-19vhost: enable vhost without without MSI-XPankaj Gupta1-2/+0
We use vhostforce to enable vhost even if Guests don't have MSI-X support and we fall back to QEMU virtio-net. This gives a very small performance gain, but the disadvantage is that guest now controls which virtio code is running (qemu or vhost) so our attack surface is doubled. This patch will enable vhost unconditionally whenever it's requested. For compatibility, enable vhost when vhostforce is set, as well. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-17tap: add VNET_LE/VNET_BE operationsGreg Kurz1-0/+6
The linux tap and macvtap backends can be told to parse vnet headers according to little or big endian. This is done through the TUNSETVNETLE and TUNSETVNETBE ioctls. This patch brings all the plumbing for QEMU to use these APIs. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost: 64 bit featuresCornelia Huck1-2/+2
Make sure that all vhost interfaces use 64 bit features, as the virtio core does, and make sure to use ULL everywhere possible to be on the safe side. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-11net: add MAC address string printerScott Feldman1-0/+1
We can use this in virtio-net code as well as new Rocker driver code, so up-level this. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-26virtio-net,tap: use standard-headersMichael S. Tsirkin1-23/+1
Drop duplicated code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2015-02-18hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster2-2/+2
Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster2-4/+4
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-10-15net: remove bootindex property from qdev to qomGonglei1-2/+1
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-27net: move queue number into NICPeersJiri Pirko1-1/+1
It indicates the number of elements in ncs field and makes sense to have int inside NICPeers. Also in parse_netdev we do not need to access container and work with NICPeers only. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-19Add new vhost-user netdev backendNikolay Nikolaev1-0/+17
Add a new QEMU netdev backend that is intended to invoke vhost_net with the vhost-user backend. It uses an Unix socket chardev to establish a communication with the 'slave' (client and server mode supported). At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon disconnection it will set link_down accordingly and notify virtio-net; the virtio-net interface will go down. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost-backend and VhostBackendTypeNikolay Nikolaev1-0/+2
Use vhost_set_backend_type to initialise a proper vhost_ops structure. In vhost_net_init and vhost_net_start_one call conditionally TAP related initialisation depending on the vhost backend type. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost_net_init will use VhostNetOptions to get all its argumentsNikolay Nikolaev1-1/+7
vhost_dev_init will replace devfd and devpath with a single opaque argument. This is initialised with a file descriptor. When TAP is used (through vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and pass the fd. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Refactor virtio-net to use generic get_vhost_netNikolay Nikolaev1-0/+1
This decouples virtio-net from the TAP netdev backend and allows support for other backends to be implemented. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-11net: Export valid host network devices listHani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-25net: remove implicit peer from offload APIStefan Hajnoczi1-7/+7
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap device). The API was defined to implicitly use nc->peer, saving the caller the trouble. This wasn't ideal because: 1. There are callers who have the peer but not the NIC. Currently they are forced to bypass the API and access peer->info->... directly. 2. The rest of the net.h API uses nc, not nc->peer, so it is inconsistent. This patch pushes nc->peer back up to callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: make tap offloading callbacks staticVincenzo Maffione1-6/+0
Since TAP offloadings are manipulated through a new API, it's not necessary to export them in include/net/tap.h anymore. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: extend NetClientInfo for offloadingVincenzo Maffione1-0/+19
Some new callbacks have been added to generalize the operations done by virtio-net and vmxnet3 frontends to manipulate TAP offloadings. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: change vnet-hdr TAP prototypesVincenzo Maffione1-2/+2
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used to return int, even though they only return true/false values. This patch changes the prototypes to return bool. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-15net: declare struct iovec in checksum.h to fix compiler warningMichael Tokarev1-0/+1
The checksum calculation header exports a function that refers to struct iov defined in iov.h. Without including the former, build fails like this: In file included from hw/net/fsl_etsec/rings.c:24:0: include/net/checksum.h:51:31: error: ‘struct iovec’ declared inside parameter list [-Werror] include/net/checksum.h:51:31: error: its scope is only this definition or declaration, which is probably not what you want [-Werror] Mention struct iovec there. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-08net: disallow to specify multicast MAC addressDmitry Krivenok1-3/+3
[Assigning a multicast MAC address to a NIC leads to confusing behavior. Reject multicast MAC addresses so users are alerted to their error straight away. The "net/eth.h" in6_addr rename prevents a name collision with <netinet/in.h> on Linux. -- Stefan] Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06net: Rename send_queue to incoming_queueJan Kiszka1-1/+1
Each networking client has a queue for packets that could not yet be delivered to that client. Calling this queue "send_queue" is highly confusing as it has nothing to to with packets send from this client but to it. Avoid this confusing by renaming it to "incoming_queue". Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15net: add support of mac-programming over macvtap in QEMU sideAmos Kong1-0/+3
Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-0/+23
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-25net: increase buffer size to accommodate Jumbo frame pktsScott Feldman1-0/+5
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty of room for the ethernet and virtio_net headers. Originally, ran into this limitation when using -netdev UDP sockets to connect VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net NIC model). Test is simple: ping -M do -s 8500 <target>. This test will attempt to ping with unfragmented packet of given size. Without patch, size is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt size up to 9000 (again, minus protocol hdrs). v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply to vde and socket netdevs. v1: increase buf size to 12K just for -netdev UDP sockets Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Common definitions for VMWARE devicesDmitry Fleytman1-0/+347
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25net: iovec checksum calculatorDmitry Fleytman1-0/+12
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Checksum-related utility functionsDmitry Fleytman1-1/+13
net_checksum_add_cont() checksum calculation for scattered data with odd chunk sizes net_raw_checksum() checksum calculation for a buffer Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27net: reduce the unnecessary memory allocation of multiqueueJason Wang1-1/+1
Edivaldo reports a problem that the array of NetClientState in NICState is too large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not used. Instead of static arrays, solving this issue by allocating the queues on demand for both the NetClientState array in NICState and VirtIONetQueue array in VirtIONet. Tested by myself, with single virtio-net-pci device. The memory allocation is almost the same as when multiqueue is not merged. Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01tap: multiqueue supportJason Wang1-1/+0
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF for a signle device many times to create multiple file descriptors as independent queues. User could also enable/disabe a specific queue through TUNSETQUEUE. The patch adds the generic infrastructure to create multiqueue taps. To achieve this a new parameter "queues" were introduced to specify how many queues were expected to be created for tap by qemu itself. Alternatively, management could also pass multiple pre-created tap file descriptors separated with ':' through a new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file descriptors could also be passed in this way. Each TAPState were still associated to a tap fd, which mean multiple TAPStates were created when user needs multiqueue taps. Since each TAPState contains one NetClientState, with the multiqueue nic support, an N peers of NetClientState were built up. A new parameter, mq_required were introduce in tap_open() to create multiqueue tap fds. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: introduce a helper to get the name of an interfaceJason Wang1-0/+1
This patch introduces a helper tap_get_ifname() to get the device name of tap device. This is needed when ifname is unspecified in the command line and qemu were asked to create tap device by itself. In this situation, the name were allocated by kernel, so if multiqueue is asked, we need to fetch its name after creating the first queue. Only linux has this support since it's the only platform that supports multiqueue tap. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: support enabling or disabling a queueJason Wang1-0/+2
This patch introduce a new bit - enabled in TAPState which tracks whether a specific queue/fd is enabled. The tap/fd is enabled during initialization and could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform specific helpers to do the real work. Polling of a tap fd can only done when the tap was enabled. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: multiqueue supportJason Wang1-4/+14
This patch adds basic multiqueue support for qemu. The idea is simple, an array of NetClientStates were introduced in NICState, parse_netdev() were extended to find and match all NetClientStates belongs to the backend and place their pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates that belongs to a nic and NICStates belongs to the netdev. And a queue_index were introduced in NetClientState to track its index. After this, each peers of a NICState were abstracted as a queue. After this change, all NetClientState that belongs to the same backend/nic has the same id. When use want to change the link status, all NetClientStates that belongs to the same backend/nic will be also changed. When user want to delete a device or netdev, all NetClientStates that belongs to the same backend/nic will be deleted also. Changing or deleting an specific queue is not allowed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce NetClientState destructorJason Wang1-0/+2
To allow allocating an array of NetClientState and free it once, this patch introduces destructor of NetClientState. Which could do type specific free, which could be used by multiqueue to free the array once. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_find_net_clients_except()Jason Wang1-0/+2
In multiqueue, all NetClientState that belongs to the same netdev or nic has the same id. So this patches introduces an helper qemu_find_net_clients_except() which finds all NetClientState with the same id. This will be used by multiqueue networking. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: intorduce qemu_del_nic()Jason Wang1-0/+1
To support multiqueue nic, this patch separate the nic destructor from qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween NiCState and NetClientState were not 1:1 in multiqueue. The following patches would refactor this function to support multiqueue nic. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_nic()Jason Wang1-0/+2
To support multiqueue, this patch introduces a helper qemu_get_nic() to get NICState from a NetClientState. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_queue()Jason Wang1-0/+1
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: tap: using bool instead of bitfieldJason Wang1-2/+2
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-17HMP: add QDict to info callback handlerWenchao Xia2-2/+2
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini2-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini2-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini5-0/+376
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-24 01:17:57 +0000