aboutsummaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2016-06-17vhost-net: save & restore vring enable stateMarc-André Lureau1-0/+1
A driver may change the vring enable state at run time but vhost-user backend may not be present (a contrived example is when the backend is disconnected and the device is reconfigured after driver rebinding) Restore the vring state when the vhost-user backend is started, so it can process the ring. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17vhost-net: save & restore vhost-user acked featuresMarc-André Lureau2-0/+4
The initial vhost-user connection sets the features to be negotiated with the driver. Renegotiation isn't possible without device reset. To handle reconnection of vhost-user backend, ensure the same set of features are provided, and reuse already acked features. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-02net_pkt: Extend packet abstraction as required by e1000e functionalityDmitry Fleytman2-44/+110
This patch extends the TX/RX packet abstractions with features that will be used by the e1000e device implementation. Changes are: 1. Support iovec lists for RX buffers 2. Deeper RX packets parsing 3. Loopback option for TX packets 4. Extended VLAN headers handling 5. RSS processing for RX packets Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02rtl8139: Move more TCP definitions to common headerDmitry Fleytman1-0/+8
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: Add macros for MAC address tracingDmitry Fleytman1-0/+5
These macros will be used by future commits introducing e1000e device emulation and by vmxnet3 tracing code. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02net: Introduce Toeplitz hash calculatorDmitry Fleytman1-0/+45
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01net/net: Add SocketReadState for reuse codesZhang Chen1-0/+13
This function is from net/socket.c, move it to net.c and net.h. Add SocketReadState to make others reuse net_fill_rstate(). suggestion from jason. v4: - move 'rs->finalize = finalize' to rs_init() v3: - remove SocketReadState init callback - put finalize callback to net_fill_rstate() v2: - rename ReadState to SocketReadState - add SocketReadState init and finalize callback v1: - init patch Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01net: vl: Move default_net to vl.cEduardo Habkost1-1/+0
All handling of defaults (default_* variables) is inside vl.c, move default_net there too, so we can more easily refactor that code later. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-22Use scripts/clean-includes to drop redundant qemu/typedefs.hMarkus Armbruster1-1/+0
Re-run scripts/clean-includes to apply the previous commit's corrections and updates. Besides redundant qemu/typedefs.h, this only finds a redundant config-host.h include in ui/egl-helpers.c. No idea how that escaped the previous runs. Some manual whitespace trimming around dropped includes squashed in. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-08filter: Add 'status' property for filter objectzhanghailiang1-0/+4
With this property, users can control if this filter is 'on' or 'off'. The default behavior for filter is 'on'. For some types of filters, they may need to react to status changing, So here, we introduced status changing callback/notifier for filter class. We will skip the disabled ('off') filter when delivering packets in net layer. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-23include: Clean up includesPeter Maydell2-3/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. NB: If this commit breaks compilation for your out-of-tree patchseries or fork, then you need to make sure you add #include "qemu/osdep.h" to any new .c files that you have. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-04net/filter: Fix the output information for command 'info network'zhanghailiang1-1/+0
The properties of netfilter object could be changed by 'qom-set' command, but the output of 'info network' command is not updated, because it got the old information through nf->info_str, it will not be updated while we change the value of netfilter's property. Here we split a helper function that could collect the output information for filter, and also remove the useless member 'info_str' from struct NetFilterState. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04net: always walk through filters in reverse if traffic is egressLi Zhijian1-1/+1
Previously, if we attach more than one filters for a single netdev, both ingress and egress traffic will go through net filters in same order like: ingress: netdev ->filter1 ->filter2 ->...filter[n] ->emulated device egress: emulated device ->filter1 ->filter2 ->...filter[n] ->netdev. This is against the natural feeling and will complicate filters configuration since in some scenes, we hope filters handle the egress traffic in a reverse order. For example, in colo-proxy (will be implemented later), we have a redirector filter and a colo-rewriter filter, we need the filter behave like: ingress(->)/egress(<-): chardev<->redirector<->colo-rewriter<->emulated device Since both buffer filter and dump do not require strict order of filters, this patch switches to always let egress traffic walk through net filters in reverse to simplify the possible filters configuration in the future. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11ether/slirp: Avoid redefinition of the same constantsDr. David Alan Gilbert1-1/+3
eth.h and slirp.h both define ETH_ALEN and ETH_P_IP rtl8139.c and eth.h both define ETH_HLEN Move the related constant (ETH_P_ARP) from slirp.h to eth.h, and remove the duplicates; make slirp.h include eth.h Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-22vhost user: add rarp sending after live migration for legacy guestThibaut Collet1-0/+1
A new vhost user message is added to allow QEMU to ask to vhost user backend to broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE capability. This new message is sent only if the backend supports the new VHOST_USER_PROTOCOL_F_RARP protocol feature. The payload of this new message is the MAC address of the guest (not known by the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid to create a new payload message type. This new message has no equivalent ioctl so a new callback is added in the userOps structure to send the request. Upon reception of this new message the vhost user backend must generate and broadcast a fake RARP request to notify the migration is terminated. Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> [Rebased and fixed checkpatch errors - Marc-André] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-12net/queue: export qemu_net_queue_append_iovYang Hongyang1-0/+7
This will be used by buffer filter implementation later to queue packets. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: print filter info associate with the netdevYang Hongyang1-0/+1
When execute "info network", print filter info also. add a info_str member to NetFilterState, store specific filters info. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: add an API to pass the packet to next filterYang Hongyang1-0/+7
add an API qemu_netfilter_pass_to_next() to pass the packet to next filter. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net/queue: introduce NetQueueDeliverFuncYang Hongyang1-1/+12
net/queue.c has logic to send/queue/flush packets but a qemu_deliver_packet_iov() call is hardcoded. Abstract this func so that we can use our own deliver function in netfilter. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net: merge qemu_deliver_packet and qemu_deliver_packet_iovYang Hongyang1-5/+0
qemu_deliver_packet_iov already have the compat delivery, we can drop qemu_deliver_packet. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: hook packets before net queue sendYang Hongyang1-0/+8
Capture packets that will be sent. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12init/cleanup of netfilter objectYang Hongyang2-0/+62
Add a netfilter object based on QOM. A netfilter is attached to a netdev, captures all network packets that pass through the netdev. When we delete the netdev, we also delete the netfilter object attached to it, because if the netdev is removed, the filter which attached to it is useless. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-09-24vhost-user: add a new message to disable/enable a specific virt queue.Changchun Ouyang1-0/+2
Add a new message, VHOST_USER_SET_VRING_ENABLE, to enable or disable a specific virt queue, which is similar to attach/detach queue for tap device. virtio driver on guest doesn't have to use max virt queue pair, it could enable any number of virt queue ranging from 1 to max virt queue pair. Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost-user: add VHOST_USER_GET_QUEUE_NUM messageYuanhan Liu1-0/+1
This is for querying how many queues the backend supports if it has mq support(when VHOST_USER_PROTOCOL_F_MQ flag is set from the quried protocol features). vhost_net_get_max_queues() is the interface to export that value, and to tell if the backend supports # of queues user requested, which is done in the following patch. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-1/+1
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-19vhost: enable vhost without without MSI-XPankaj Gupta1-2/+0
We use vhostforce to enable vhost even if Guests don't have MSI-X support and we fall back to QEMU virtio-net. This gives a very small performance gain, but the disadvantage is that guest now controls which virtio code is running (qemu or vhost) so our attack surface is doubled. This patch will enable vhost unconditionally whenever it's requested. For compatibility, enable vhost when vhostforce is set, as well. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-17tap: add VNET_LE/VNET_BE operationsGreg Kurz1-0/+6
The linux tap and macvtap backends can be told to parse vnet headers according to little or big endian. This is done through the TUNSETVNETLE and TUNSETVNETBE ioctls. This patch brings all the plumbing for QEMU to use these APIs. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost: 64 bit featuresCornelia Huck1-2/+2
Make sure that all vhost interfaces use 64 bit features, as the virtio core does, and make sure to use ULL everywhere possible to be on the safe side. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-11net: add MAC address string printerScott Feldman1-0/+1
We can use this in virtio-net code as well as new Rocker driver code, so up-level this. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-26virtio-net,tap: use standard-headersMichael S. Tsirkin1-23/+1
Drop duplicated code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2015-02-18hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster2-2/+2
Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster2-4/+4
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-10-15net: remove bootindex property from qdev to qomGonglei1-2/+1
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-27net: move queue number into NICPeersJiri Pirko1-1/+1
It indicates the number of elements in ncs field and makes sense to have int inside NICPeers. Also in parse_netdev we do not need to access container and work with NICPeers only. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-19Add new vhost-user netdev backendNikolay Nikolaev1-0/+17
Add a new QEMU netdev backend that is intended to invoke vhost_net with the vhost-user backend. It uses an Unix socket chardev to establish a communication with the 'slave' (client and server mode supported). At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon disconnection it will set link_down accordingly and notify virtio-net; the virtio-net interface will go down. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost-backend and VhostBackendTypeNikolay Nikolaev1-0/+2
Use vhost_set_backend_type to initialise a proper vhost_ops structure. In vhost_net_init and vhost_net_start_one call conditionally TAP related initialisation depending on the vhost backend type. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost_net_init will use VhostNetOptions to get all its argumentsNikolay Nikolaev1-1/+7
vhost_dev_init will replace devfd and devpath with a single opaque argument. This is initialised with a file descriptor. When TAP is used (through vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and pass the fd. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Refactor virtio-net to use generic get_vhost_netNikolay Nikolaev1-0/+1
This decouples virtio-net from the TAP netdev backend and allows support for other backends to be implemented. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-11net: Export valid host network devices listHani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-25net: remove implicit peer from offload APIStefan Hajnoczi1-7/+7
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap device). The API was defined to implicitly use nc->peer, saving the caller the trouble. This wasn't ideal because: 1. There are callers who have the peer but not the NIC. Currently they are forced to bypass the API and access peer->info->... directly. 2. The rest of the net.h API uses nc, not nc->peer, so it is inconsistent. This patch pushes nc->peer back up to callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: make tap offloading callbacks staticVincenzo Maffione1-6/+0
Since TAP offloadings are manipulated through a new API, it's not necessary to export them in include/net/tap.h anymore. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: extend NetClientInfo for offloadingVincenzo Maffione1-0/+19
Some new callbacks have been added to generalize the operations done by virtio-net and vmxnet3 frontends to manipulate TAP offloadings. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: change vnet-hdr TAP prototypesVincenzo Maffione1-2/+2
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used to return int, even though they only return true/false values. This patch changes the prototypes to return bool. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-15net: declare struct iovec in checksum.h to fix compiler warningMichael Tokarev1-0/+1
The checksum calculation header exports a function that refers to struct iov defined in iov.h. Without including the former, build fails like this: In file included from hw/net/fsl_etsec/rings.c:24:0: include/net/checksum.h:51:31: error: ‘struct iovec’ declared inside parameter list [-Werror] include/net/checksum.h:51:31: error: its scope is only this definition or declaration, which is probably not what you want [-Werror] Mention struct iovec there. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-08net: disallow to specify multicast MAC addressDmitry Krivenok1-3/+3
[Assigning a multicast MAC address to a NIC leads to confusing behavior. Reject multicast MAC addresses so users are alerted to their error straight away. The "net/eth.h" in6_addr rename prevents a name collision with <netinet/in.h> on Linux. -- Stefan] Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06net: Rename send_queue to incoming_queueJan Kiszka1-1/+1
Each networking client has a queue for packets that could not yet be delivered to that client. Calling this queue "send_queue" is highly confusing as it has nothing to to with packets send from this client but to it. Avoid this confusing by renaming it to "incoming_queue". Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15net: add support of mac-programming over macvtap in QEMU sideAmos Kong1-0/+3
Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-0/+23
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-25net: increase buffer size to accommodate Jumbo frame pktsScott Feldman1-0/+5
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty of room for the ethernet and virtio_net headers. Originally, ran into this limitation when using -netdev UDP sockets to connect VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net NIC model). Test is simple: ping -M do -s 8500 <target>. This test will attempt to ping with unfragmented packet of given size. Without patch, size is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt size up to 9000 (again, minus protocol hdrs). v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply to vde and socket netdevs. v1: increase buf size to 12K just for -netdev UDP sockets Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Common definitions for VMWARE devicesDmitry Fleytman1-0/+347
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-12-27 18:26:21 +0000