aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)AuthorFilesLines
2017-06-13hw/intc/arm_gicv3_its: Implement state save/restoreEric Auger1-0/+8
We need to handle both registers and ITS tables. While register handling is standard, ITS table handling is more challenging since the kernel API is devised so that the tables are flushed into guest RAM and not in vmstate buffers. Flushing the ITS tables on device pre_save() is too late since the guest RAM is already saved at this point. Table flushing needs to happen when we are sure the vcpus are stopped and before the last dirty page saving. The right point is RUN_STATE_FINISH_MIGRATE but sometimes the VM gets stopped before migration launch so let's simply flush the tables each time the VM gets stopped. For regular ITS registers we just can use vmstate pre_save() and post_load() callbacks. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1497023553-18411-3-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13hw/arm/exynos: Move DRAM initialization next boardsKrzysztof Kozlowski1-4/+1
Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization from exynos4210.c to exynos4_boards.c because DRAM is board specific, not SoC. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170609' ↵Peter Maydell2-23/+25
into staging ppc patch queue 2017-06-09 This batch contains more patches to rework the pseries machine hotplug infrastructure, plus an assorted batch of bugfixes. It contains a start on fixes to restore migration from older machine types on older versions which was broken by some xics changes. There are still a few missing pieces here, though. # gpg: Signature made Fri 09 Jun 2017 06:26:03 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.10-20170609: Revert "spapr: fix memory hot-unplugging" xics: drop ICPStateClass::cpu_setup() handler xics: setup cpu at realize time xics: pass appropriate types to realize() handlers. xics: introduce macros for ICP/ICS link properties hw/cpu: core.c can be compiled as common object hw/ppc/spapr: Adjust firmware name for PCI bridges xics: add reset() handler to ICPStateClass pnv_core: drop reference on ICPState object during CPU realization spapr: Rework DRC name handling spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers spapr: Change DRC attach & detach methods to functions spapr: Clean up handling of DR-indicator spapr: Clean up RTAS set-indicator spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state() spapr: Clean up DR entity sense handling pseries: Correct panic behaviour for pseries machine type spapr: fix memory leak in spapr_memory_pre_plug() target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok() target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+4
pc, pci, vhost: fixes Some fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 08 Jun 2017 20:04:24 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: hw/pcie: fix the generic pcie root port to support migration nvdimm acpi: fix region format interface code vhost-user-bridge: fix iov_restore_front() warning Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170608' into ↵Peter Maydell1-0/+1
staging s390x: misc fixes bunch of fixes - reject MIDA accesses for CCWs - cpumodel fixes - cross-build fix for bios - migration improvements # gpg: Signature made Thu 08 Jun 2017 14:10:29 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20170608: s390x/cpumodel: improve defintion search without an IBC s390x/cpumodel: take care of the cpuid format bit for KVM pc-bios/s390-ccw: use STRIP variable in Makefile s390x/css: fence off MIDA s390x/css: catch section mismatch on load Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-09Revert "spapr: fix memory hot-unplugging"Laurent Vivier1-1/+0
This reverts commit fe6824d12642b005c69123ecf8631f9b13553f8b. Conflicts hw/ppc/spapr_drc.c, because get_index() has been renamed spapr_get_index(). This didn't fix the problem. Once the hotplug has been started some memory is allocated and some structures are allocated. We don't free it when we ignore the unplug, and we can't because they can be in use by the kernel. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-09xics: drop ICPStateClass::cpu_setup() handlerGreg Kurz1-1/+0
The cpu_setup() handler is only implemented by xics_kvm, where it really does a typical "realize" job. Moreover, the realize() handler is called shortly after cpu_setup(), on the same path. This patch converts xics_kvm to implement realize() instead of cpu_setup(). Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-09xics: setup cpu at realize timeGreg Kurz1-2/+1
Until recently, spapr used to allocate ICPState objects for the lifetime of the machine. They would only be associated to vCPUs in xics_cpu_setup() when plugging a CPU core. Now that ICPState objects have the same lifecycle as vCPUs, it is possible to associate them during realization. This patch hence open-codes xics_cpu_setup() in icp_realize(). The vCPU is passed as a property. Note that vCPU now needs to be realized first for the IRQs to be allocated. It also needs to resetted before ICPState realization in order to synchronize with KVM. Since ICPState objects are freed when unrealized, xics_cpu_destroy() isn't needed anymore and can be safely dropped. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-09xics: pass appropriate types to realize() handlers.Greg Kurz1-4/+4
It makes more sense to pass an IPCState * to handlers of ICPStateClass instead of a DeviceState *, if only to benefit from compile time type checking. The same goes with ICSStateClass. While here, we also change the declaration of ICPStateClass in xics.h for consistency. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-09xics: introduce macros for ICP/ICS link propertiesGreg Kurz1-0/+4
These properties are part of the XICS API. They deserve to appear explicitely in the XICS header file. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-08hw/pcie: fix the generic pcie root port to support migrationMarcel Apfelbaum1-0/+4
Add msix state to pcie-root-ports's vmstate in order to support migration. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-08xics: add reset() handler to ICPStateClassGreg Kurz1-0/+1
Taking into account that qemu_set_irq() returns immediatly if its first argument is NULL, icp_kvm_reset() largely duplicates icp_reset(). This patch introduces a reset() handler, so that the common logic can be implemented in icp_reset() only. While there we can also drop icp_kvm_realize() and icp_kvm_unrealize(). This causes icp-kvm to be realized in icp_realize(), which sets icp->xics, but it has no impact. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-08spapr: Rework DRC name handlingDavid Gibson1-2/+1
DRC objects have a get_name method which returns the DRC name generated when the DRC is created. Replace that with a fixed spapr_drc_name() function which generates the name on the fly from other information. This means: * We get rid of a method with only one implementation, and only local callers * We don't have to carry the name string around for the lifetime of the DRC * We use information added to the class structure to generate the name in standard format, so we don't need an explicit switch on drc type any more We also eliminate the 'name' property; it's basically useless since the only information in it can easily be deduced from other things. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-08spapr: Change DRC attach & detach methods to functionsDavid Gibson1-3/+4
DRC objects have attach & detach methods, but there's only one implementation. Although there are some differences in its behaviour for different DRC types, the overall structure is the same, so while we might want different method implementations for some parts, we're unlikely to want them for the top-level functions. So, replace them with direct function calls. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-08spapr: Clean up handling of DR-indicatorDavid Gibson1-8/+8
There are 3 types of "indicator" associated with hotplug in the PAPR spec the "allocation state", "isolation state" and "DR-indicator". The first two are intimately tied to the various state transitions associated with hotplug. The DR-indicator, however, is different and simpler. It's basically just a guest controlled variable which can be used by the guest to flag state or problems associated with a device. The idea is that the hypervisor can use it to present information back on management consoles (on some machines with PowerVM it may even control physical LEDs on the machine case associated with the relevant device). For that reason, there's only ever likely to be a single update implementation so the set_indicator_state method isn't useful. Replace it with a direct function call. While we're there, make some small associated cleanups: * PAPR doesn't use the term "indicator state", just "DR-indicator" and the allocation state and isolation state are also considered "indicators". Rename things to be less confusing * Fold set_indicator_state() and rtas_set_indicator_state() into a single rtas_set_dr_indicator() function. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-08spapr: Clean up DR entity sense handlingDavid Gibson1-2/+2
DRC classes have an entity_sense method to determine (in a specific PAPR sense) the presence or absence of a device plugged into a DRC. However, we only have one implementation of the method, which explicitly tests for different DRC types. This changes it to instead have different method implementations for the two cases: "logical" and "physical" DRCs. While we're at it, the entity sense method always returns RTAS_OUT_SUCCESS, and the interesting value is returned via pass-by-reference. Simplify this to directly return the value we care about Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06qtest: add rtc periodic timer testXiao Guangrong1-0/+20
It tests the accuracy of rtc periodic timer which is recently improved & fixed by commit 7ffcb539a3 ("mc146818rtc: precisely count the clock for periodic timer", 2017-05-19). Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Message-Id: <20170527025301.23499-1-xiaoguangrong@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-06Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170606' ↵Peter Maydell2-26/+57
into staging ppc patch queue 2017-06-06 Accumulated patches for ppc targets and the pseries machine type. The big thing in this batch is a start on a substantial cleanup of the pseries hotplug mechanisms, which were pretty confusing. For now these shouldn't cause substantial behavioural changes, but I am hoping these lead to clearer code and eventually to fixes for the bugs we have in hotplug handling, particularly when hotplug and migration are combined. The remaining patches are mostly bugfixes. # gpg: Signature made Tue 06 Jun 2017 03:48:50 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.10-20170606: spapr: Remove some non-useful properties on DRC objects spapr: Eliminate spapr_drc_get_type_str() spapr: Move configure-connector state into DRC spapr: Clean up spapr_dr_connector_by_*() spapr: Introduce DRC subclasses spapr/drc: don't migrate DRC of cold-plugged CPUs and LMBs spapr: Allow boot from vhost-*-scsi backends ppc/pnv: check the return value of fdt_setprop() spapr_nvram: Check return value from blk_getlength() target/ppc: Fixup set_spr error in h_register_process_table target-ppc: Fix openpic timer read register offset spapr: Make DRC get_index and get_type methods into plain functions spapr: Abolish DRC set_configured method spapr: Abolish DRC get_fdt method spapr: Move DRC RTAS calls into spapr_drc.c migration: Mark CPU states dirty before incoming migration/loadvm migration: remove register_savevm() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-06Merge remote-tracking branch ↵Peter Maydell1-21/+21
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue, 2017-06-05 # gpg: Signature made Mon 05 Jun 2017 19:58:01 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: scripts: Test script to look for -device crashes qemu.py: Add QEMUMachine.exitcode() method qemu.py: Don't set _popen=None on error/shutdown spapr: cleanup spapr_fixup_cpu_numa_dt() usage numa: move numa_node from CPUState into target specific classes numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result numa: make sure that all cpus have has_node_id set if numa is enabled numa: move default mapping init to machine numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr pc: Use "min-[x]level" on compat_props Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-06s390x/css: fence off MIDACornelia Huck1-0/+1
MIDA (modified indirect data addressing) is an optional facility, and we (currently) don't support it. Let's post an operand exception if the guest tries to set it in the orb and a channel program check if it is set in a ccw, as specified in the Principles of Operation. Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-06spapr: Eliminate spapr_drc_get_type_str()David Gibson1-0/+1
This function was used in generating the device tree. However, now that we have different QOM types for different DRC types we can easily store the information we need in the class structure and avoid this specialized lookup function. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06spapr: Move configure-connector state into DRCDavid Gibson2-14/+7
Currently the sPAPRMachineState contains a list of sPAPRConfigureConnector structures which store intermediate state for the ibm,configure-connector RTAS call. This was an attempt to separate this state from the core of the DRC state. However the configure connector process is intimately tied to the DRC model, so there's really no point trying to have two levels of interface here. Moving the configure-connector state into its corresponding DRC allows removal of a number of helpers for maintaining the anciliary list. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06spapr: Clean up spapr_dr_connector_by_*()David Gibson1-3/+2
* Change names to something less ludicrously verbose * Now that we have QOM subclasses for the different DRC types, use a QOM typename instead of a PAPR type value parameter The latter allows removal of the get_type_shift() helper. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06spapr: Introduce DRC subclassesDavid Gibson1-3/+44
Currently we only have a single QOM type for all DRCs, but lots of places where we switch behaviour based on the DRC's PAPR defined type. This is a poor use of our existing type system. So, instead create QOM subclasses for each PAPR defined DRC type. We also introduce intermediate subclasses for physical and logical DRCs, a division which will be useful later on. Instead of being stored in the DRC object itself, the PAPR type is now stored in the class structure. There are still many places where we switch directly on the PAPR type value, but this at least provides the basis to start to remove those. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06spapr: Make DRC get_index and get_type methods into plain functionsDavid Gibson1-2/+3
These two methods only have one implementation, and the spec they're implementing means any other implementation is unlikely, verging on impossible. So replace them with simple functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
2017-06-06spapr: Abolish DRC set_configured methodDavid Gibson1-3/+0
DRConnectorClass has a set_configured method, however: * There is only one implementation, and only ever likely to be one * There's exactly one caller, and that's (now) local * The implementation is very straightforward So abolish the method entirely, and just open-code what we need. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
2017-06-06spapr: Abolish DRC get_fdt methodDavid Gibson1-1/+0
The DRConnectorClass includes a get_fdt method. However * There's only one implementation, and there's only likely to ever be one * Both callers are local to spapr_drc * Each caller only uses one half of the actual implementation So abolish get_fdt() entirely, and just open-code what we need. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
2017-06-05pc: Use "min-[x]level" on compat_propsEduardo Habkost1-21/+21
Since the automatic cpuid-level code was introduced in commit c39c0edf9bb3b968ba95484465a50c7b19f4aa3a ("target-i386: Automatically set level/xlevel/xlevel2 when needed"), the CPU model tables just define the default CPUID level code (set using "min-level"). Setting "[x]level" forces CPUID level to a specific value and disable the automatic-level logic. But the PC compat code was not updated and the existing "[x]level" compat properties broke compatibility for people using features that triggered the auto-level code. To keep previous behavior, we should set "min-[x]level" instead of "[x]level" on compat_props. This was not a problem for most cases, because old machine-types don't have full-cpuid-auto-level enabled. The only common use case it broke was the CPUID[7] auto-level code, that was already enabled since the first CPUID[7] feature was introduced (in QEMU 1.4.0). This causes the regression reported at: https://bugzilla.redhat.com/show_bug.cgi?id=1454641 Change the PC compat code to use "min-[x]level" instead of "[x]level" on compat_props, and add new test cases to ensure we don't break this again. Reported-by: "Guo, Zhiyi" <zhguo@redhat.com> Fixes: c39c0edf9bb ("target-i386: Automatically set level/xlevel/xlevel2 when needed") Cc: qemu-stable@nongnu.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-06-05Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell1-0/+1
staging trivial patches for 2017-06-05 # gpg: Signature made Mon 05 Jun 2017 15:23:46 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (21 commits) hw/core: nmi.c can be compiled as common-obj nowadays dump: fix memory_mapping_filter leak ide-test: check return of fwrite help: Add newline to end of thread option help text qemu-ga: remove useless allocation scsi/lsi53c895a: Remove unused lsi_mem_*() return value qapi: Fix some QMP documentation regressions hw/mips: add missing include register: display register prefix (name) since it is available hw/sparc: use ARRAY_SIZE() macro hw/xtensa: sim: use g_string/g_new target/arm: add data cache invalidation cp15 instruction to cortex-r5 block: Correct documentation for BLOCK_WRITE_THRESHOLD trivial: Remove unneeded ifndef in memory.h altera_timer: fix incorrect memset configure: Detect native NetBSD curses(3) tests/libqtest: Print error instead of aborting when env variable is missing docs/qdev-device-use.txt: update section Default Devices docs qemu-doc: Avoid ide-drive, it's deprecated qemu-doc: Add hyperlinks to further license information ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-05Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into ↵Peter Maydell6-7/+7
staging # gpg: Signature made Fri 02 Jun 2017 20:12:48 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/chrfe-pull-request: char: move char devices to chardev/ char: make chr_fe_deinit() optionaly delete backend char: rename functions that are not part of fe char: move CharBackend handling in char-fe unit char: generalize qemu_chr_write_all() be-hci: use backend functions chardev: serial & parallel declaration to own headers chardev: move headers to include/chardev Remove/replace sysemu/char.h inclusion char-win: close file handle except with console char-win: rename hcom->file char-win: rename win_chr_init/poll win_chr_serial_init/poll char-win: remove WinChardev.len char-win: simplify win_chr_read() char: cast ARRAY_SIZE() as signed to silent warning on empty array Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-04hw/mips: add missing includePhilippe Mathieu-Daudé1-0/+1
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-02vhost: rework IOTLB messagingMaxime Coquelin1-8/+15
This patch reworks IOTLB messaging to prepare for vhost-user device IOTLB support. IOTLB messages handling is extracted from vhost-kernel backend, so that only the messages transport remains backend specifics. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-02vhost: propagate errors in vhost_device_iotlb_miss()Maxime Coquelin1-1/+1
Some backends might want to know when things went wrong. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-02char: move CharBackend handling in char-fe unitMarc-André Lureau6-6/+6
Move all the frontend struct and methods to a seperate unit. This avoids accidentally mixing backend and frontend calls, and helps with readabilty. Make qemu_chr_replay() a macro shared by both char and char-fe. Export qemu_chr_write(), and use a macro for qemu_chr_write_all() (nb: yes, CharBackend is for char frontend :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau6-7/+7
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-01migration: Split qemu-file.hJuan Quintela1-1/+1
Split the file into public and internal interfaces. I have to rename the external one because we can't have two include files with the same name in the same directory. Build system gets confused. The only exported functions are the ones that handle basic types. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-01migration: Remove unneeded includes of migration/vmstate.hJuan Quintela3-3/+0
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-30Merge remote-tracking branch 'mst/tags/for_upstream' into stagingStefan Hajnoczi4-0/+11
pci, virtio, vhost: fixes A bunch of fixes all over the place. Most notably this fixes the new MTU feature when using vhost. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 29 May 2017 01:10:24 AM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: acpi-test: update expected files pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry vhost-user: pass message as a pointer to process_message_reply() virtio_net: Bypass backends for MTU feature negotiation intel_iommu: turn off pt before 2.9 intel_iommu: support passthrough (PT) intel_iommu: allow dev-iotlb context entry conditionally intel_iommu: use IOMMU_ACCESS_FLAG() intel_iommu: provide vtd_ce_get_type() intel_iommu: renaming context entry helpers x86-iommu: use DeviceClass properties memory: remove the last param in memory_region_iommu_replay() memory: tune last param of iommu_ops.translate() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-30Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170525' into stagingStefan Hajnoczi4-10/+16
ppc patch queue 2017-05-25 Assorted accumulated patches. These are nearly all bugfixes at one level or another - some for longstanding problems, others for some regressions caused by more recent cleanups. This includes preliminary patches towards fixing migration for Radix Page Table guests under POWER9 and also fixing some migration regressions due to the re-organization of the interrupt controller code. Not all the pieces are there yet, so those still won't quite work, but the preliminary changes make sense on their own. # gpg: Signature made Thu 25 May 2017 04:50:00 AM BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * dgibson/tags/ppc-for-2.10-20170525: xics: add unrealize handler hw/ppc/spapr.c: recover pending LMB unplug info in spapr_lmb_release hw/ppc: migrating the DRC state of hotplugged devices hw/ppc: removing drc->detach_cb and drc->detach_cb_opaque hw/ppc/spapr.c: adding pending_dimm_unplugs to sPAPRMachineState spapr: add pre_plug function for memory pseries: Restore support for total vcpus not a multiple of threads-per-core for old machine types pseries: Split CAS PVR negotiation out into a separate function spapr: fix error reporting in xics_system_init() spapr_cpu_core: drop reference on ICP object during CPU realization hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntry spapr: ensure core_slot isn't NULL in spapr_core_unplug() xics_kvm: cache already enabled vCPU ids spapr: Consolidate HPT freeing code into a routine spapr-cpu-core: release ICP object when realization fails spapr: sanitize error handling in spapr_ics_create() ppc/xics: simplify prototype of xics_spapr_init() target/ppc: reset reservation in do_rfi() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-25virtio_net: Bypass backends for MTU feature negotiationMaxime Coquelin3-0/+6
This patch adds a new internal "x-mtu-bypass-backend" property to bypass backends for MTU feature negotiation. When this property is set, the MTU feature is negotiated as soon as supported by the guest and a MTU value is set via the host_mtu parameter. In case the backend advertises the feature (e.g. DPDK's vhost-user backend), the feature negotiation is propagated down to the backend. When this property is not set, the backend has to support the MTU feature for its negotiation to succeed. For compatibility purpose, this property is disabled for machine types v2.9 and older. Cc: Aaron Conole <aconole@redhat.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-25intel_iommu: turn off pt before 2.9Peter Xu1-0/+4
This is for compatibility. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2017-05-25intel_iommu: support passthrough (PT)Peter Xu1-0/+1
Hardware support for VT-d device passthrough. Although current Linux can live with iommu=pt even without this, but this is faster than when using software passthrough. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Liu, Yi L <yi.l.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2017-05-25hw/ppc: removing drc->detach_cb and drc->detach_cb_opaqueDaniel Henrique Barboza3-7/+8
The pointer drc->detach_cb is being used as a way of informing the detach() function inside spapr_drc.c which cb to execute. This information can also be retrieved simply by checking drc->type and choosing the right callback based on it. In this context, detach_cb is redundant information that must be managed. After the previous spapr_lmb_release change, no detach_cb_opaques are being used by any of the three callbacks functions. This is yet another information that is now unused and, on top of that, can't be migrated either. This patch makes the following changes: - removal of detach_cb_opaque. the 'opaque' argument was removed from the callbacks and from the detach() function of sPAPRConnectorClass. The attribute detach_cb_opaque of sPAPRConnector was removed. - removal of detach_cb from the detach() call. The function pointer detach_cb of sPAPRConnector was removed. detach() now uses a switch(drc->type) to execute the apropriate callback. To achieve this, spapr_core_release, spapr_lmb_release and spapr_phb_remove_pci_device_cb callbacks were made public to be visible inside detach(). Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-25hw/ppc/spapr.c: adding pending_dimm_unplugs to sPAPRMachineStateDavid Gibson1-0/+6
The LMB DRC release callback, spapr_lmb_release(), uses an opaque parameter, a sPAPRDIMMState struct that stores the current LMBs that are allocated to a DIMM (nr_lmbs). After each call to this callback, the nr_lmbs is decremented by one and, when it reaches zero, the callback proceeds with the qdev calls to hot unplug the LMB. Using drc->detach_cb_opaque is problematic because it can't be migrated in the future DRC migration work. This patch makes the following changes to eliminate the usage of this opaque callback inside spapr_lmb_release: - sPAPRDIMMState was moved from spapr.c and added to spapr.h. A new attribute called 'addr' was added to it. This is used as an unique identifier to associate a sPAPRDIMMState to a PCDIMM element. - sPAPRMachineState now hosts a new QTAILQ called 'pending_dimm_unplugs'. This queue of sPAPRDIMMState elements will store the DIMM state of DIMMs that are currently going under an unplug process. - spapr_lmb_release() will now retrieve the nr_lmbs value by getting the correspondent sPAPRDIMMState. A helper function called spapr_dimm_get_address was created to fetch the address of a PCDIMM device inside spapr_lmb_release. When nr_lmbs reaches zero and the callback proceeds with the qdev hot unplug calls, the sPAPRDIMMState struct is removed from spapr->pending_dimm_unplugs. After these changes, the opaque argument for spapr_lmb_release is now unused and is passed as NULL inside spapr_del_lmbs. This and the other opaque arguments can now be safely removed from the code. As an additional cleanup made by this patch, the spapr_del_lmbs function was merged with spapr_memory_unplug_request. The former was being called only by the latter and both were small enough to fit one single function. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> [dwg: Minor stylistic cleanups] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-24Merge remote-tracking branch 'cohuck/tags/s390x-20170523' into stagingStefan Hajnoczi5-25/+84
s390x updates: - support for vfio-ccw to passthrough channel devices - allow ccw bios to boot from scsi generic devices - bugfix for initial reset # gpg: Signature made Tue 23 May 2017 12:02:24 PM BST # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * cohuck/tags/s390x-20170523: (21 commits) s390/kvm: do not reset riccb on initial cpu reset MAINTAINERS: Add vfio-ccw maintainer vfio/ccw: update sense data if a unit check is pending s390x/css: ccw translation infrastructure s390x/css: introduce and realize ccw-request callback vfio/ccw: get irqs info and set the eventfd fd vfio/ccw: get io region info vfio/ccw: vfio based subchannel passthrough driver s390x/css: device support for s390-ccw passthrough s390x/css: realize css_create_sch s390x/css: realize css_sch_build_schib s390x/css: add s390-squash-mcss machine option linux-headers: update pc-bios/s390-ccw.img: rebuild image pc-bios/s390-ccw: Build a reasonable max_sectors limit pc-bios/s390-ccw: Get Block Limits VPD device data pc-bios/s390-ccw: Get list of supported VPD pages pc-bios/s390-ccw: Refactor scsi_inquiry function pc-bios/s390-ccw: Break up virtio-scsi read into multiples pc-bios/s390-ccw: Move SCSI block factor to outer read ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-24hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntryDaniel Henrique Barboza1-1/+0
Currenty we do not have any RTAS event that is reported by the event-scan interface. The existing events, RTAS_LOG_TYPE_EPOW and RTAS_LOG_TYPE_HOTPLUG, are being reported by the check-exception interface and, as such, marked as 'exception=true'. Commit 79853e18d9, 'spapr_events: event-scan RTAS interface', added the event_scan interface because the guest kernel requires it to initialize other required interfaces. It is acting since then as a stub because no events that would be reported by it were added since then. However, the existence of the 'exception' boolean adds an unnecessary load in the future migration of the pending_events, sPAPREventLogEntry QTAILQ that hosts the pending RTAS events. To make the code cleaner and ease the future migration changes, this patch makes the following changes: - remove the 'exception' boolean that filter these events. There is nothing to filter since all events are reported by check-exception; - functions rtas_event_log_queue, rtas_event_log_dequeue and rtas_event_log_contains don't receive the 'exception' boolean as parameter; - event_scan function was simplified. It was calling 'rtas_event_log_dequeue(mask, false)' that was always returning 'NULL' because we have no events that are created with exception=false, thus in the end it would execute a jump to 'out_no_events' all the time. The function now assumes that this will always be the case and all the remaining logic were deleted. In the future, when or if we add new RTAS events that should be reported with the event_scan interface, we can refer to the changes made in this patch to add the event_scan logic back. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-24xics_kvm: cache already enabled vCPU idsGreg Kurz1-1/+0
Since commit a45863bda90d ("xics_kvm: Don't enable KVM_CAP_IRQ_XICS if already enabled"), we were able to re-hotplug a vCPU that had been hot- unplugged ealier, thanks to a boolean flag in ICPState that we set when enabling KVM_CAP_IRQ_XICS. This could work because the lifecycle of all ICPState objects was the same as the machine. Commit 5bc8d26de20c ("spapr: allocate the ICPState object from under sPAPRCPUCore") broke this assumption and now we always pass a freshly allocated ICPState object (ie, with the flag unset) to icp_kvm_cpu_setup(). This cause re-hotplug to fail with: Unable to connect CPU8 to kernel XICS: Device or resource busy Let's fix this by caching all the vCPU ids for which KVM_CAP_IRQ_XICS was enabled. This also drops the now useless boolean flag from ICPState. Reported-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Tested-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-24spapr: Consolidate HPT freeing code into a routineBharata B Rao1-0/+1
Consolidate the code that frees HPT into a separate routine spapr_free_hpt() as the same chunk of code is called from two places. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-24ppc/xics: simplify prototype of xics_spapr_init()Greg Kurz1-1/+1
This function only does hypercall and RTAS-call registration, and thus never returns an error. This patch adapt the prototype to reflect that. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-19Merge remote-tracking branch 'kraxel/tags/pull-audio-20170519-1' into stagingStefan Hajnoczi1-0/+3
audio: move & rename soundhw init code. # gpg: Signature made Fri 19 May 2017 12:22:51 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-audio-20170519-1: audio: Rename hw/audio/audio.h to hw/audio/soundhw.h audio: Rename audio_init() to soundhw_init() audio: Move arch_init audio code to hw/audio/soundhw.c Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-08-15 17:47:16 +0000