aboutsummaryrefslogtreecommitdiff
path: root/include/hw/virtio
AgeCommit message (Collapse)AuthorFilesLines
2023-12-26vdpa: use dev_shared in vdpa_iommuEugenio Pérez1-1/+1
The memory listener functions can call these too. Make vdpa_iommu work with VhostVDPAShared. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-13-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: use VhostVDPAShared in vdpa_dma_map and unmapEugenio Pérez1-2/+2
The callers only have the shared information by the end of this series. Start converting this functions. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-12-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move iommu_list to vhost_vdpa_sharedEugenio Pérez1-1/+1
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the iommu_list member to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first / last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-11-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: remove msg type of vhost_vdpaEugenio Pérez1-1/+0
It is always VHOST_IOTLB_MSG_V2. We can always make it back per vhost_dev if needed. This change makes easier for vhost_vdpa_map and unmap not to depend on vhost_vdpa but only in VhostVDPAShared. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-10-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move backend_cap to vhost_vdpa_sharedEugenio Pérez1-0/+3
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the backend_cap member to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first / last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-9-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move iotlb_batch_begin_sent to vhost_vdpa_sharedEugenio Pérez1-1/+2
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the iotlb_batch_begin_sent member to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first / last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-8-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move file descriptor to vhost_vdpa_sharedEugenio Pérez1-1/+1
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the file descriptor to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first / last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-7-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move shadow_data to vhost_vdpa_sharedEugenio Pérez1-2/+3
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the shadow_data member to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first or last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-5-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move iova_range to vhost_vdpa_sharedEugenio Pérez1-1/+2
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the iova range to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first or last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-4-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: move iova tree to the shared structEugenio Pérez1-2/+2
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the iova tree to VhostVDPAShared so all vhost_vdpa can use it, rather than always in the first or last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-3-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: add VhostVDPASharedEugenio Pérez1-0/+5
It will hold properties shared among all vhost_vdpa instances associated with of the same device. For example, we just need one iova_tree or one memory listener for the entire device. Next patches will register the vhost_vdpa memory listener at the beginning of the VM migration at the destination. This enables QEMU to map the memory to the device before stopping the VM at the source, instead of doing while both source and destination are stopped, thus minimizing the downtime. However, the destination QEMU is unaware of which vhost_vdpa struct will register its memory_listener. If the source guest has CVQ enabled, it will be the one associated with the CVQ. Otherwise, it will be the first one. Save the memory operations related members in a common place rather than always in the first / last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-2-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-25vhost-scsi: Add support for a worker thread per virtqueueMike Christie1-0/+1
This adds support for vhost-scsi to be able to create a worker thread per virtqueue. Right now for vhost-net we get a worker thread per tx/rx virtqueue pair which scales nicely as we add more virtqueues and CPUs, but for scsi we get the single worker thread that's shared by all virtqueues. When trying to send IO to more than 2 virtqueues the single thread becomes a bottlneck. This patch adds a new setting, worker_per_virtqueue, which can be set to: false: Existing behavior where we get the single worker thread. true: Create a worker per IO virtqueue. Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20231204231618.21962-3-michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2023-12-25vhost: Add worker backend calloutsMike Christie1-0/+14
This adds the vhost backend callouts for the worker ioctls added in the 6.4 linux kernel commit: c1ecd8e95007 ("vhost: allow userspace to create workers") Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20231204231618.21962-2-michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-21virtio-blk: add iothread-vq-mapping parameterStefan Hajnoczi1-0/+2
Add the iothread-vq-mapping parameter to assign virtqueues to IOThreads. Store the vq:AioContext mapping in the new struct VirtIOBlockDataPlane->vq_aio_context[] field and refactor the code to use the per-vq AioContext instead of the BlockDriverState's AioContext. Reimplement --device virtio-blk-pci,iothread= and non-IOThread mode by assigning all virtqueues to the IOThread and main loop's AioContext in vq_aio_context[], respectively. The comment in struct VirtIOBlockDataPlane about EventNotifiers is stale. Remove it. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20231220134755.814917-5-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-12-21scsi: remove AioContext lockingStefan Hajnoczi1-14/+0
The AioContext lock no longer has any effect. Remove it. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-ID: <20231205182011.1976568-9-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-12-21virtio-scsi: replace AioContext lock with tmf_bh_lockStefan Hajnoczi1-1/+2
Protect the Task Management Function BH state with a lock. The TMF BH runs in the main loop thread. An IOThread might process a TMF at the same time as the TMF BH is running. Therefore tmf_bh_list and tmf_bh must be protected by a lock. Run TMF request completion in the IOThread using aio_wait_bh_oneshot(). This avoids more locking to protect the virtqueue and SCSI layer state. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231205182011.1976568-2-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-12-21virtio-blk: add lock to protect s->rqStefan Hajnoczi1-1/+2
s->rq is accessed from IO_CODE and GLOBAL_STATE_CODE. Introduce a lock to protect s->rq and eliminate reliance on the AioContext lock. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20230914140101.1065008-3-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-27hw/virtio: Add VirtioPCIDeviceTypeInfo::instance_finalize fieldPhilippe Mathieu-Daudé1-0/+1
The VirtioPCIDeviceTypeInfo structure, added in commit a4ee4c8baa ("virtio: Helper for registering virtio device types") got extended in commit 8ea90ee690 ("virtio: add class_size") with the @class_size field. Do similarly with the @instance_finalize field. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231121174051.63038-2-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-15include/hw/virtio/vhost.h: spelling fix: sateMichael Tokarev1-1/+1
Fixes: 4a00d5d7f4b6 "vhost: Add high-level state save/load functions" Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-11-07Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi3-0/+138
into staging virtio,pc,pci: features, fixes virtio sound card support vhost-user: back-end state migration cxl: line length reduction enabling fabric management vhost-vdpa: shadow virtqueue hash calculation Support shadow virtqueue RSS Support tests: CPU topology related smbios test cases Fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01 # GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83 # nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68 # D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG # BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX # 0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc= # =vEv+ # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Nov 2023 18:06:50 HKT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (63 commits) acpi/tests/avocado/bits: enable console logging from bits VM acpi/tests/avocado/bits: enforce 32-bit SMBIOS entry point hw/cxl: Add tunneled command support to mailbox for switch cci. hw/cxl: Add dummy security state get hw/cxl/type3: Cleanup multiple CXL_TYPE3() calls in read/write functions hw/cxl/mbox: Add Get Background Operation Status Command hw/cxl: Add support for device sanitation hw/cxl/mbox: Wire up interrupts for background completion hw/cxl/mbox: Add support for background operations hw/cxl: Implement Physical Ports status retrieval hw/pci-bridge/cxl_downstream: Set default link width and link speed hw/cxl/mbox: Add Physical Switch Identify command. hw/cxl/mbox: Add Information and Status / Identify command hw/cxl: Add a switch mailbox CCI function hw/pci-bridge/cxl_upstream: Move defintion of device to header. hw/cxl/mbox: Generalize the CCI command processing hw/cxl/mbox: Pull the CCI definition out of the CXLDeviceState hw/cxl/mbox: Split mailbox command payload into separate input and output hw/cxl/mbox: Pull the payload out of struct cxl_cmd and make instances constant hw/cxl: Fix a QEMU_BUILD_BUG_ON() in switch statement scope issue. ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-07vhost: Add high-level state save/load functionsHanna Czenczek1-0/+35
vhost_save_backend_state() and vhost_load_backend_state() can be used by vhost front-ends to easily save and load the back-end's state to/from the migration stream. Because we do not know the full state size ahead of time, vhost_save_backend_state() simply reads the data in 1 MB chunks, and writes each chunk consecutively into the migration stream, prefixed by its length. EOF is indicated by a 0-length chunk. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Hanna Czenczek <hreitz@redhat.com> Message-Id: <20231016134243.68248-7-hreitz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07vhost-user: Interface for migration state transferHanna Czenczek3-0/+103
Add the interface for transferring the back-end's state during migration as defined previously in vhost-user.rst. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Hanna Czenczek <hreitz@redhat.com> Message-Id: <20231016134243.68248-6-hreitz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-03virtio-iommu: Implement set_iova_ranges() callbackEric Auger1-0/+1
The implementation populates the array of per IOMMUDevice host reserved ranges. It is forbidden to have conflicting sets of host IOVA ranges to be applied onto the same IOMMU MR (implied by different host devices). In case the callback is called after the probe request has been issues by the driver, a warning is issued. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com> Tested-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-11-03virtio-iommu: Record whether a probe request has been issuedEric Auger1-0/+1
Add an IOMMUDevice 'probe_done' flag to record that the driver already issued a probe request on that device. This will be useful to double check host reserved regions aren't notified after the probe and hence are not taken into account by the driver. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com> Tested-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-11-03virtio-iommu: Introduce per IOMMUDevice reserved regionsEric Auger1-0/+1
For the time being the per device reserved regions are just a duplicate of IOMMU wide reserved regions. Subsequent patches will combine those with host reserved regions, if any. Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Yanghang Liu <yanghliu@redhat.com> Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-11-03virtio-iommu: Rename reserved_regions into prop_resv_regionsEric Auger1-2/+2
Rename VirtIOIOMMU (nb_)reserved_regions fields with the "prop_" prefix to highlight those fields are set through a property, at machine level. They are IOMMU wide. A subsequent patch will introduce per IOMMUDevice reserved regions that will include both those IOMMU wide property reserved regions plus, sometimes, host reserved regions, if the device is backed by a host device protected by a physical IOMMU. Also change nb_ prefix by nr_. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-10-23Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi4-3/+23
into staging virtio,pc,pci: features, cleanups infrastructure for vhost-vdpa shadow work piix south bridge rework reconnect for vhost-user-scsi dummy ACPI QTG DSM for cxl tests, cleanups, fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU # pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd # 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT # ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV # 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa # zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg= # =ILek # -----END PGP SIGNATURE----- # gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits) intel-iommu: Report interrupt remapping faults, fix return value MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section vhost-user: Fix protocol feature bit conflict tests/acpi: Update DSDT.cxl with QTG DSM hw/cxl: Add QTG _DSM support for ACPI0017 device tests/acpi: Allow update of DSDT.cxl hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range vhost-user: fix lost reconnect vhost-user-scsi: start vhost when guest kicks vhost-user-scsi: support reconnect to backend vhost: move and rename the conn retry times vhost-user-common: send get_inflight_fd once hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine hw/isa/piix: Implement multi-process QEMU support also for PIIX4 hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4 hw/isa/piix: Rename functions to be shared for PCI interrupt triggering hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 hw/isa/piix: Share PIIX3's base class with PIIX4 hw/isa/piix: Harmonize names of reset control memory regions ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-22vhost-user: Fix protocol feature bit conflictHanna Czenczek1-1/+2
The VHOST_USER_PROTOCOL_F_XEN_MMAP feature bit was defined in f21e95ee97d, which has been part of qemu's 8.1.0 release. However, it seems it was never added to qemu's code, but it is well possible that it is already used by different front-ends outside of qemu (i.e., Xen). VHOST_USER_PROTOCOL_F_SHARED_OBJECT in contrast was added to qemu's code in 16094766627, but never defined in the vhost-user specification. As a consequence, both bits were defined to be 17, which cannot work. Regardless of whether actual code or the specification should take precedence, F_XEN_MMAP is already part of a qemu release, while F_SHARED_OBJECT is not. Therefore, bump the latter to take number 18 instead of 17, and add this to the specification. Take the opportunity to add at least a little note on the VhostUserShared structure to the specification. This structure is referenced by the new commands introduced in 16094766627, but was not defined. Fixes: 160947666276c5b7f6bca4d746bcac2966635d79 ("vhost-user: add shared_object msg") Signed-off-by: Hanna Czenczek <hreitz@redhat.com> Message-Id: <20231016083201.23736-1-hreitz@redhat.com> Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22vhost-user: fix lost reconnectLi Feng1-1/+2
When the vhost-user is reconnecting to the backend, and if the vhost-user fails at the get_features in vhost_dev_init(), then the reconnect will fail and it will not be retriggered forever. The reason is: When the vhost-user fails at get_features, the vhost_dev_cleanup will be called immediately. vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'. The reconnect path is: vhost_user_blk_event vhost_user_async_close(.. vhost_user_blk_disconnect ..) qemu_chr_fe_set_handlers <----- clear the notifier callback schedule vhost_user_async_close_bh The vhost->vdev is null, so the vhost_user_blk_disconnect will not be called, then the event fd callback will not be reinstalled. All vhost-user devices have this issue, including vhost-user-blk/scsi. With this patch, if the vdev->vdev is null, the fd callback will still be reinstalled. Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling") Signed-off-by: Li Feng <fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20231009044735.941655-6-fengli@smartx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22vhost-user-scsi: support reconnect to backendLi Feng2-1/+7
If the backend crashes and restarts, the device is broken. This patch adds reconnect for vhost-user-scsi. This patch also improves the error messages, and reports some silent errors. Tested with spdk backend. Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20231009044735.941655-4-fengli@smartx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
2023-10-22vhost: move and rename the conn retry timesLi Feng1-0/+2
Multiple devices need this macro, move it to a common header. Signed-off-by: Li Feng <fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20231009044735.941655-3-fengli@smartx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22virtio: call ->vhost_reset_device() during resetStefan Hajnoczi1-0/+10
vhost-user-scsi has a VirtioDeviceClass->reset() function that calls ->vhost_reset_device(). The other vhost devices don't notify the vhost device upon reset. Stateful vhost devices may need to handle device reset in order to free resources or prevent stale device state from interfering after reset. Call ->vhost_device_reset() from virtio_reset() so that that vhost devices are notified of device reset. This patch affects behavior as follows: - vhost-kernel: No change in behavior since ->vhost_reset_device() is not implemented. - vhost-user: back-ends that negotiate VHOST_USER_PROTOCOL_F_RESET_DEVICE now receive a VHOST_USER_DEVICE_RESET message upon device reset. Otherwise there is no change in behavior. DPDK, SPDK, libvhost-user, and the vhost-user-backend crate do not negotiate VHOST_USER_PROTOCOL_F_RESET_DEVICE automatically. - vhost-vdpa: an extra SET_STATUS 0 call is made during device reset. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20231004014532.1228637-4-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
2023-10-19ui/input: Constify QemuInputHandler structurePhilippe Mathieu-Daudé1-1/+1
Access to QemuInputHandlerState::handler are read-only. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20231017131251.43708-1-philmd@linaro.org>
2023-10-17Merge tag 'gpu-pull-request' of https://gitlab.com/marcandre.lureau/qemu ↵Stefan Hajnoczi3-0/+59
into staging virtio-gpu rutabaga support # -----BEGIN PGP SIGNATURE----- # # iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmUtP5YcHG1hcmNhbmRy # ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5X9CD/4s1n/GZyDr9bh04V03 # otAqtq2CSyuUOviqBrqxYgraCosUD1AuX8WkDy5cCPtnKC4FxRjgVlm9s7K/yxOW # xZ78e4oVgB1F3voOq6LgtKK6BRG/BPqNzq9kuGcayCHQbSxg7zZVwa702Y18r2ZD # pjOhbZCrJTSfASL7C3e/rm7798Wk/hzSrClGR56fbRAVgQ6Lww2L97/g0nHyDsWK # DrCBrdqFtKjpLeUHmcqqS4AwdpG2SyCgqE7RehH/wOhvGTxh/JQvHbLGWK2mDC3j # Qvs8mClC5bUlyNQuUz7lZtXYpzCW6VGMWlz8bIu+ncgSt6RK1TRbdEfDJPGoS4w9 # ZCGgcTxTG/6BEO76J/VpydfTWDo1FwQCQ0Vv7EussGoRTLrFC3ZRFgDWpqCw85yi # AjPtc0C49FHBZhK0l1CoJGV4gGTDtD9jTYN0ffsd+aQesOjcsgivAWBaCOOQWUc8 # KOv9sr4kLLxcnuCnP7p/PuVRQD4eg0TmpdS8bXfnCzLSH8fCm+n76LuJEpGxEBey # 3KPJPj/1BNBgVgew+znSLD/EYM6YhdK2gF5SNrYsdR6UcFdrPED/xmdhzFBeVym/ # xbBWqicDw4HLn5YrJ4tzqXje5XUz5pmJoT5zrRMXTHiu4pjBkEXO/lOdAoFwSy8M # WNOtmSyB69uCrbyLw6xE2/YX8Q== # =5a/Z # -----END PGP SIGNATURE----- # gpg: Signature made Mon 16 Oct 2023 09:50:14 EDT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * tag 'gpu-pull-request' of https://gitlab.com/marcandre.lureau/qemu: docs/system: add basic virtio-gpu documentation gfxstream + rutabaga: enable rutabaga gfxstream + rutabaga: meson support gfxstream + rutabaga: add initial support for gfxstream gfxstream + rutabaga prep: added need defintions, fields, and options virtio-gpu: blob prep virtio-gpu: hostmem virtio-gpu: CONTEXT_INIT feature virtio: Add shared memory capability Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-16Merge tag 'pull-shadow-2023-10-12' of https://repo.or.cz/qemu/armbru into ↵Stefan Hajnoczi1-4/+4
staging -Wshadow=local patches for 2023-10-12 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmUoCNsSHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTTocP/iQ6RggqcHrBxwZZtyydvpWCFrqfuBTk # 6GQtKGm51UcQ9kmAIsoV90pOzdUdjwrpXzKKJwsLzMcVcp1NDPsQIL54wdsRmZfH # E9mxI7UlZf/KWzrfP1nFLcU8T5+cuXosDgjx55Y1Kq+ZRn+7x0DInBGdRryokWTG # zcKh9T3n9KWKscLL7hvxLZS5054V9HBDYIpBBEyV2GtRrCLL0Y+9aaKkBrejHMgY # oKrLKHz1cOGOTzQ7AbhA+Wv3eN+GYVyjnCSUXK/270jbU8Xg4m1vSbrPq2PWy5kV # IGGKZtZsrSq0VBoTi+i9++vP5djKVUYQLqx10L+NYCp25wBnTgXKSDtdAqI68aev # TYrOlQ1ldKXJT4ghPqoWCjRKkryV6/Gj9fHbbvsHJ7SB84VO8G/kpn5zXvN/BosG # 8vxLEL0xc1Q3Sxi91DCjVsP7UebjBt1j/JugU9zVr8OFJWriFmllYB67AOOo3gS2 # c+FNVPLle3udw5EHClMapcGSzTun4iHeEsiJMOOgGOHC09Bi+Om6LlneFWljmvQp # a6ma+bebxCjzuO6heey2Q/1JjltR8Ex0bnbWIoNsysA6OnDtTlbxDqZEca1h6As+ # Rm9XFKf7nVQIHFKW3sjbx6MgqAL6sBakfeJah5Pj5iIKtLaZR591RyAfvfB2sBlS # ZYtp95GIKWXZ # =AArx # -----END PGP SIGNATURE----- # gpg: Signature made Thu 12 Oct 2023 10:55:23 EDT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * tag 'pull-shadow-2023-10-12' of https://repo.or.cz/qemu/armbru: target/i386: fix shadowed variable pasto contrib/vhost-user-gpu: Fix compiler warning when compiling with -Wshadow hw/virtio/virtio-gpu: Fix compiler warning when compiling with -Wshadow libvhost-user: Fix compiler warning with -Wshadow=local libvduse: Fix compiler warning with -Wshadow=local Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-16gfxstream + rutabaga prep: added need defintions, fields, and optionsGurchetan Singh1-0/+27
This modifies the common virtio-gpu.h file have the fields and defintions needed by gfxstream/rutabaga, by VirtioGpuRutabaga. Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Alyssa Ross <hi@alyssa.is> Tested-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
2023-10-16virtio-gpu: blob prepAntonio Caggiano2-0/+20
This adds preparatory functions needed to: - decode blob cmds - tracking iovecs Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Alyssa Ross <hi@alyssa.is> Tested-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Huang Rui <ray.huang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
2023-10-16virtio-gpu: hostmemGerd Hoffmann1-0/+5
Use VIRTIO_GPU_SHM_ID_HOST_VISIBLE as id for virtio-gpu. Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com> Tested-by: Alyssa Ross <hi@alyssa.is> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Huang Rui <ray.huang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
2023-10-16virtio-gpu: CONTEXT_INIT featureAntonio Caggiano1-0/+3
The feature can be enabled when a backend wants it. Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com> Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Alyssa Ross <hi@alyssa.is> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Huang Rui <ray.huang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
2023-10-16virtio: Add shared memory capabilityDr. David Alan Gilbert1-0/+4
Define a new capability type 'VIRTIO_PCI_CAP_SHARED_MEMORY_CFG' to allow defining shared memory regions with sizes and offsets of 2^32 and more. Multiple instances of the capability are allowed and distinguished by a device-specific 'id'. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com> Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Alyssa Ross <hi@alyssa.is> Tested-by: Huang Rui <ray.huang@amd.com> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
2023-10-12virtio-mem: Expose device memory dynamically via multiple memslots if enabledDavid Hildenbrand1-1/+31
Having large virtio-mem devices that only expose little memory to a VM is currently a problem: we map the whole sparse memory region into the guest using a single memslot, resulting in one gigantic memslot in KVM. KVM allocates metadata for the whole memslot, which can result in quite some memory waste. Assuming we have a 1 TiB virtio-mem device and only expose little (e.g., 1 GiB) memory, we would create a single 1 TiB memslot and KVM has to allocate metadata for that 1 TiB memslot: on x86, this implies allocating a significant amount of memory for metadata: (1) RMAP: 8 bytes per 4 KiB, 8 bytes per 2 MiB, 8 bytes per 1 GiB -> For 1 TiB: 2147483648 + 4194304 + 8192 = ~ 2 GiB (0.2 %) With the TDP MMU (cat /sys/module/kvm/parameters/tdp_mmu) this gets allocated lazily when required for nested VMs (2) gfn_track: 2 bytes per 4 KiB -> For 1 TiB: 536870912 = ~512 MiB (0.05 %) (3) lpage_info: 4 bytes per 2 MiB, 4 bytes per 1 GiB -> For 1 TiB: 2097152 + 4096 = ~2 MiB (0.0002 %) (4) 2x dirty bitmaps for tracking: 2x 1 bit per 4 KiB page -> For 1 TiB: 536870912 = 64 MiB (0.006 %) So we primarily care about (1) and (2). The bad thing is, that the memory consumption *doubles* once SMM is enabled, because we create the memslot once for !SMM and once for SMM. Having a 1 TiB memslot without the TDP MMU consumes around: * With SMM: 5 GiB * Without SMM: 2.5 GiB Having a 1 TiB memslot with the TDP MMU consumes around: * With SMM: 1 GiB * Without SMM: 512 MiB ... and that's really something we want to optimize, to be able to just start a VM with small boot memory (e.g., 4 GiB) and a virtio-mem device that can grow very large (e.g., 1 TiB). Consequently, using multiple memslots and only mapping the memslots we really need can significantly reduce memory waste and speed up memslot-related operations. Let's expose the sparse RAM memory region using multiple memslots, mapping only the memslots we currently need into our device memory region container. The feature can be enabled using "dynamic-memslots=on" and requires "unplugged-inaccessible=on", which is nowadays the default. Once enabled, we'll auto-detect the number of memslots to use based on the memslot limit provided by the core. We'll use at most 1 memslot per gigabyte. Note that our global limit of memslots accross all memory devices is currently set to 256: even with multiple large virtio-mem devices, we'd still have a sane limit on the number of memslots used. The default is to not dynamically map memslot for now ("dynamic-memslots=off"). The optimization must be enabled manually, because some vhost setups (e.g., hotplug of vhost-user devices) might be problematic until we support more memslots especially in vhost-user backends. Note that "dynamic-memslots=on" is just a hint that multiple memslots *may* be used for internal optimizations, not that multiple memslots *must* be used. The actual number of memslots that are used is an internal detail: for example, once memslot metadata is no longer an issue, we could simply stop optimizing for that. Migration source and destination can differ on the setting of "dynamic-memslots". Message-ID: <20230926185738.277351-17-david@redhat.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-10-12vhost: Add vhost_get_max_memslots()David Hildenbrand1-0/+1
Let's add vhost_get_max_memslots(). Message-ID: <20230926185738.277351-12-david@redhat.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-10-12vhost: Return number of free memslotsDavid Hildenbrand1-1/+1
Let's return the number of free slots instead of only checking if there is a free slot. Required to support memory devices that consume multiple memslots. This is a preparation for memory devices that consume multiple memslots. Message-ID: <20230926185738.277351-6-david@redhat.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-10-12vhost: Remove vhost_backend_can_merge() callbackDavid Hildenbrand1-4/+0
Checking whether the memory regions are equal is sufficient: if they are equal, then most certainly the contained fd is equal. The whole vhost-user memslot handling is suboptimal and overly complicated. We shouldn't have to lookup a RAM memory regions we got notified about in vhost_user_get_mr_data() using a host pointer. But that requires a bigger rework -- especially an alternative vhost_set_mem_table() backend call that simply consumes MemoryRegionSections. For now, let's just drop vhost_backend_can_merge(). Message-ID: <20230926185738.277351-3-david@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-10-12vhost: Rework memslot filtering and fix "used_memslot" trackingDavid Hildenbrand1-3/+2
Having multiple vhost devices, some filtering out fd-less memslots and some not, can mess up the "used_memslot" accounting. Consequently our "free memslot" checks become unreliable and we might run out of free memslots at runtime later. An example sequence which can trigger a potential issue that involves different vhost backends (vhost-kernel and vhost-user) and hotplugged memory devices can be found at [1]. Let's make the filtering mechanism less generic and distinguish between backends that support private memslots (without a fd) and ones that only support shared memslots (with a fd). Track the used_memslots for both cases separately and use the corresponding value when required. Note: Most probably we should filter out MAP_PRIVATE fd-based RAM regions (for example, via memory-backend-memfd,...,shared=off or as default with memory-backend-file) as well. When not using MAP_SHARED, it might not work as expected. Add a TODO for now. [1] https://lkml.kernel.org/r/fad9136f-08d3-3fd9-71a1-502069c000cf@redhat.com Message-ID: <20230926185738.277351-2-david@redhat.com> Fixes: 988a27754bbb ("vhost: allow backends to filter memory sections") Cc: Tiwei Bie <tiwei.bie@intel.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-10-12hw/virtio/virtio-gpu: Fix compiler warning when compiling with -WshadowThomas Huth1-4/+4
Avoid using trivial variable names in macros, otherwise we get the following compiler warning when compiling with -Wshadow=local: In file included from ../../qemu/hw/display/virtio-gpu-virgl.c:19: ../../home/thuth/devel/qemu/hw/display/virtio-gpu-virgl.c: In function ‘virgl_cmd_submit_3d’: ../../qemu/include/hw/virtio/virtio-gpu.h:228:16: error: declaration of ‘s’ shadows a previous local [-Werror=shadow=compatible-local] 228 | size_t s; | ^ ../../qemu/hw/display/virtio-gpu-virgl.c:215:5: note: in expansion of macro ‘VIRTIO_GPU_FILL_CMD’ 215 | VIRTIO_GPU_FILL_CMD(cs); | ^~~~~~~~~~~~~~~~~~~ ../../qemu/hw/display/virtio-gpu-virgl.c:213:12: note: shadowed declaration is here 213 | size_t s; | ^ cc1: all warnings being treated as errors Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20231009084559.41427-1-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-10-04vhost-user: add shared_object msgAlbert Esteve2-0/+4
Add three new vhost-user protocol `VHOST_USER_BACKEND_SHARED_OBJECT_* messages`. These new messages are sent from vhost-user back-ends to interact with the virtio-dmabuf table in order to add or remove themselves as virtio exporters, or lookup for virtio dma-buf shared objects. The action taken in the front-end depends on the type stored in the virtio shared object hash table. When the table holds a pointer to a vhost backend for a given UUID, the front-end sends a VHOST_USER_GET_SHARED_OBJECT to the backend holding the shared object. The messages can only be sent after successfully negotiating a new VHOST_USER_PROTOCOL_F_SHARED_OBJECT vhost-user protocol feature bit. Finally, refactor code to send response message so that all common parts both for the common REPLY_ACK case, and other data responses, can call it and avoid code repetition. Signed-off-by: Albert Esteve <aesteve@redhat.com> Message-Id: <20231002065706.94707-4-aesteve@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/display: introduce virtio-dmabufAlbert Esteve1-0/+100
This API manages objects (in this iteration, dmabuf fds) that can be shared along different virtio devices, associated to a UUID. The API allows the different devices to add, remove and/or retrieve the objects by simply invoking the public functions that reside in the virtio-dmabuf file. For vhost backends, the API stores the pointer to the backend holding the object. Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Albert Esteve <aesteve@redhat.com> Message-Id: <20231002065706.94707-3-aesteve@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04vhost-user: move VhostUserProtocolFeature definition to header fileJonah Palmer1-0/+21
Move the definition of VhostUserProtocolFeature to include/hw/virtio/vhost-user.h. Remove previous definitions in hw/scsi/vhost-user-scsi.c, hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c. Previously there were 3 separate definitions of this over 3 different files. Now only 1 definition of this will be present for these 3 files. Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04vdpa: export vhost_vdpa_set_vring_readyEugenio Pérez1-0/+1
The vhost-vdpa net backend needs to enable vrings in a different order than default, so export it. No functional change intended except for tracing, that now includes the (virtio) index being enabled and the return value of the ioctl. Still ignoring return value of this function if called from vhost_vdpa_dev_start, as reorganize calling code around it is out of the scope of this series. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230822085330.3978829-3-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-09-18 13:05:09 +0000