aboutsummaryrefslogtreecommitdiff
path: root/include/hw/ssi
AgeCommit message (Collapse)AuthorFilesLines
2021-05-01aspeed/smc: Add extra controls to request DMACédric Le Goater1-0/+1
The AST2600 SPI controllers have a set of bits to request/grant DMA access. Add a new SMC feature for these controllers and use it to check access to the DMA registers. Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210407171637.777743-16-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01aspeed/smc: Add a 'features' attribute to the object classCédric Le Goater1-1/+1
It will simplify extensions of the SMC model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210407171637.777743-15-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use aliasPhilippe Mathieu-Daudé1-0/+1
The flash mmio region is exposed as an AddressSpace. AddressSpaces must not be sysbus-mapped, therefore map the region using an alias. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [ clg : Fix DMA_FLASH_ADDR() ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210312182851.1922972-3-f4bug@amsat.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210407171637.777743-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01aspeed/smc: Remove unused "sdram-base" propertyCédric Le Goater1-3/+0
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210407171637.777743-3-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-10hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spipsXuzhou Cheng1-1/+1
Now that the Xilinx CSU DMA model is implemented, the existing DMA related dead codes in the ZynqMP QSPI are useless and should be removed. The maximum register number is also updated to only include the QSPI registers. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210303135254.3970-6-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-04hw/ssi: Add SiFive SPI controller supportBin Meng1-0/+47
This adds the SiFive SPI controller model for the FU540 SoC. The direct memory-mapped SPI flash mode is unsupported. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-02-11arm: Update infocenter.arm.com URLsPeter Maydell1-2/+3
Update infocenter.arm.com URLs for various pieces of Arm documentation to the new developer.arm.com equivalents. (There is a redirection in place from the old URLs, but we might as well update our comments in case the redirect ever disappears in future.) This patch covers all the URLs which are not MPS2/SSE-200/IoTKit related (those are dealt with in a different patch). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210205171456.19939-1-peter.maydell@linaro.org
2021-02-02hw/ssi: imx_spi: Use a macro for number of chip selects supportedBin Meng1-1/+4
Avoid using a magic number (4) everywhere for the number of chip selects supported. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 20210129132323.30946-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10hw/core/stream: Rename StreamSlave as StreamSinkPhilippe Mathieu-Daudé1-1/+1
In order to use inclusive terminology, rename 'slave stream' as 'sink stream'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20200910070131.435543-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hw/ssi: Rename SSI 'slave' as 'peripheral'Philippe Mathieu-Daudé1-23/+23
In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/ Patch created mechanically using: $ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave) $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE) $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave) $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave) $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \ $(git grep -l ssi_create_slave) Then in VMStateDescription vmstate_ssi_peripheral we restored the "SSISlave" migration stream name (to avoid breaking migration). Finally the following files have been manually tweaked: - hw/ssi/pl022.c - hw/ssi/xilinx_spips.c Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012124955.3409127-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hw/ssi: Update coding style to make checkpatch.pl happyPhilippe Mathieu-Daudé1-7/+9
To make the next commit easier to review, clean this code first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012124955.3409127-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hw/ssi/aspeed_smc: Rename 'max_slaves' variable as 'max_peripherals'Philippe Mathieu-Daudé1-1/+1
In order to use inclusive terminology, rename max_slaves as max_peripherals. Patch generated using: $ sed -i s/slave/peripheral/ \ hw/ssi/aspeed_smc.c include/hw/ssi/aspeed_smc.h One line in aspeed_smc_read() has been manually tweaked to pass checkpatch. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201012124955.3409127-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost5-17/+6
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost2-7/+2
This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18qom: Remove module_obj_name parameter from OBJECT_DECLARE* macrosEduardo Habkost1-1/+1
One of the goals of having less boilerplate on QOM declarations is to avoid human error. Requiring an extra argument that is never used is an opportunity for mistakes. Remove the unused argument from OBJECT_DECLARE_TYPE and OBJECT_DECLARE_SIMPLE_TYPE. Coccinelle patch used to convert all users of the macros: @@ declarer name OBJECT_DECLARE_TYPE; identifier InstanceType, ClassType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_TYPE(InstanceType, ClassType, - lowercase, UPPERCASE); @@ declarer name OBJECT_DECLARE_SIMPLE_TYPE; identifier InstanceType, lowercase, UPPERCASE; @@ OBJECT_DECLARE_SIMPLE_TYPE(InstanceType, - lowercase, UPPERCASE); Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200916182519.415636-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-14hw/ssi: NPCM7xx Flash Interface Unit device modelHavard Skinnemoen1-0/+73
This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-09Use OBJECT_DECLARE_TYPE where possibleEduardo Habkost1-4/+2
Replace DECLARE_OBJ_CHECKERS with OBJECT_DECLARE_TYPE where the typedefs can be safely removed. Generated running: $ ./scripts/codeconverter/converter.py -i \ --pattern=DeclareObjCheckers $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200831210740.126168-16-ehabkost@redhat.com> Message-Id: <20200831210740.126168-17-ehabkost@redhat.com> Message-Id: <20200831210740.126168-18-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost7-28/+20
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost7-18/+34
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-07-03Replace uses of FROM_SSI_SLAVE() macro with QOM castsPeter Maydell1-2/+0
The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way to cast from an SSISlave* to the instance struct of a subtype of TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which have the same effect (by writing the QOM macros if the types were previously missing them.) (The FROM_SSI_SLAVE() macro allows the SSISlave member of the subtype's struct to be anywhere as long as it is named "ssidev", whereas a QOM cast macro insists that it is the first thing in the subtype's struct. This is true for all the types we convert here.) This removes all the uses of FROM_SSI_SLAVE() so we can delete the definition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-18-peter.maydell@linaro.org
2020-07-03hw/misc/max111x: Use GPIO lines rather than max111x_set_input()Peter Maydell1-3/+0
The max111x ADC device model allows other code to set the level on the 8 ADC inputs using the max111x_set_input() function. Replace this with generic qdev GPIO inputs, which also allow inputs to be set to arbitrary values. Using GPIO lines will make it easier for board code to wire things up, so that if device A wants to set the ADC input it doesn't need to have a direct pointer to the max111x but can just set that value on its output GPIO, which is then wired up by the board to the appropriate max111x input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-11-peter.maydell@linaro.org
2020-07-03ssi: Add ssi_realize_and_unref()Peter Maydell1-0/+26
Add an ssi_realize_and_unref(), for the benefit of callers who want to be able to create an SSI device, set QOM properties on it, and then do the realize-and-unref afterwards. The API works on the same principle as the recently added qdev_realize_and_undef(), sysbus_realize_and_undef(), etc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-9-peter.maydell@linaro.org
2020-06-15ssi: ssi_create_slave_no_init() is now unused, dropMarkus Armbruster1-1/+0
Cc: Alistair Francis <alistair@alistair23.me> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-26-armbru@redhat.com>
2020-06-15ssi: ssi_auto_connect_slaves() never does anything, dropMarkus Armbruster1-4/+0
ssi_auto_connect_slaves(parent, cs_line, bus) iterates over @parent's QOM children @dev of type TYPE_SSI_SLAVE. It puts these on @bus, and sets cs_line[] to qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0). Suspicious: there is no protection against overrunning cs_line[]. Turns out it's safe because ssi_auto_connect_slaves() never finds any such children. Its called by realize methods of some (but not all) devices providing an SSI bus, and gets passed the device. SSI slave devices are always created with ssi_create_slave_no_init(), optionally via ssi_create_slave(). This adds them to their SSI bus. It doesn't set their QOM parent. ssi_create_slave_no_init() is always immediately followed by qdev_init_nofail(), with no QOM parent assigned, so device_set_realized() puts the device into the /machine/unattached/ orphanage. None become QOM children of a device providing an SSI bus. ssi_auto_connect_slaves() was added in commit b4ae3cfa57 "ssi: Add slave autoconnect helper". I can't see which slaves it was supposed to connect back then. Cc: Alistair Francis <alistair@alistair23.me> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-23-armbru@redhat.com>
2019-12-16aspeed/smc: Add AST2600 timings registersCédric Le Goater1-0/+1
Each CS has its own Read Timing Compensation Register on newer SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed/smc: Introduce segment operationsCédric Le Goater1-0/+4
AST2600 will use a different encoding for the addresses defined in the Segment Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Inject errors in DMA checksumCédric Le Goater1-0/+1
Emulate read errors in the DMA Checksum Register for high frequencies and optimistic settings of the Read Timing Compensation Register. This will help in tuning the SPI timing calibration algorithm. Errors are only injected when the property "inject_failure" is set to true as suggested by Philippe. The values below are those to expect from the first flash device of the FMC controller of a palmetto-bmc machine. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Add support for DMAsCédric Le Goater1-0/+6
The FMC controller on the Aspeed SoCs support DMA to access the flash modules. It can operate in a normal mode, to copy to or from the flash module mapping window, or in a checksum calculation mode, to evaluate the best clock settings for reads. The model introduces two custom address spaces for DMAs: one for the AHB window of the FMC flash devices and one for the DRAM. The latter is populated using a "dram" link set from the machine with the RAM container region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-6-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-1/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16include: Make headers more self-containedMarkus Armbruster2-0/+2
Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-01aspeed/smc: add a 'sdram_base' propertyCédric Le Goater1-0/+3
The DRAM address of a DMA transaction depends on the DRAM base address of the SoC. Inform the SMC controller model with this value. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618165311.27066-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29aspeed/smc: snoop SPI transfers to fake dummy cyclesCédric Le Goater1-0/+3
The m25p80 models dummy cycles using byte transfers. This works well when the transfers are initiated by the QEMU model of a SPI controller but when these are initiated by the OS, it breaks emulation. Snoop the SPI transfer to catch commands requiring dummy cycles and replace them with byte transfers compatible with the m25p80 model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20190124140519.13838-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-24hw/ssi/pl022: Allow use as embedded-struct devicePeter Maydell1-0/+51
Create a new include file for the pl022's device struct, type macros, etc, so that it can be instantiated using the "embedded struct" coding style. While we're adding the new file to MAINTAINERS, add also the .c file, which was missing an entry. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-16-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-26xilinx_spips: Make dma transactions as per dma_burst_sizeSai Pavan Boddu1-1/+4
Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t dma-burst-size property. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1529660880-30376-1-git-send-email-sai.pavan.boddu@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13xilinx_spips: Set all of the reset valuesAlistair Francis1-1/+1
Following the ZynqMP register spec let's ensure that all reset values are set. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 19836f3e0a298b13343c5a59c87425355e7fd8bd.1513104804.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13xilinx_spips: Add support for the ZynqMP Generic QSPIFrancisco Iglesias1-1/+31
Add support for the Zynq Ultrascale MPSoc Generic QSPI. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20171126231634.9531-13-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13xilinx_spips: Add support for zero pumpingFrancisco Iglesias1-0/+2
Add support for zero pumping according to the transfer size register. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20171126231634.9531-10-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13xilinx_spips: Add support for RX discard and RX drainFrancisco Iglesias1-0/+6
Add support for the RX discard and RX drain functionality. Also transmit one byte per dummy cycle (to the flash memories) with commands that require these. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20171126231634.9531-8-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13xilinx_spips: Move FlashCMD, XilinxQSPIPS and XilinxSPIPSClassFrancisco Iglesias1-0/+34
Move the FlashCMD enum, XilinxQSPIPS and XilinxSPIPSClass structures to the header for consistency (struct XilinxSPIPS is found there). Also move out a define and remove two double included headers (while touching the code). Finally, add 4 byte address commands to the FlashCMD enum. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20171126231634.9531-6-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21msf2: Add Smartfusion2 SPI controllerSubbaraya Sundeep1-0/+58
Modelled Microsemi's Smartfusion2 SPI controller. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: handle SPI flash Command modeCédric Le Goater1-1/+1
The Aspeed SMC controllers have a mode (Command mode) in which accesses to the flash content are no different than doing MMIOs. The controller generates all the necessary commands to load (or store) data in memory. However, accesses are restricted to the segment window assigned the the flash module by the controller. This window is defined by the Segment Address Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-8-git-send-email-clg@kaod.org [PMM: Deleted now-unused aspeed_smc_is_usermode() function] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: adjust the size of the register regionCédric Le Goater1-0/+1
The SPI controller of the AST2400 SoC has less registers. So we can adjust the size of the memory region holding the registers depending on the controller type. We can also remove the guest_error logging which is useless as the range of the region is strict enough. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: unfold the AspeedSMCController arrayCédric Le Goater1-0/+1
This is getting difficult to read. Also add a 'has_dma' field for each controller type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: move the flash module mapping address under the controller definitionCédric Le Goater1-1/+2
This will ease the definition of the new controllers for the AST2500 SoC and also ease the support of the segment registers, which provide a way to reconfigure the mapping window of each slave. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Add the SPI deviceAlistair Francis1-0/+72
Add the STM32F2xx SPI device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12Clean up header guards that don't match their file nameMarkus Armbruster1-3/+3
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-04ast2400: add SPI flash slavesCédric Le Goater1-0/+21
Each controller on the ast2400 has a memory range on which it maps its flash module slaves. Each slave is assigned a memory segment for its mapping that can be changed at bootime with the Segment Address Register. This is not supported in the current implementation so we are using the defaults provided by the specs. Each SPI flash slave can then be accessed in two modes: Command and User. When in User mode, accesses to the memory segment of the slaves are translated in SPI transfers. When in Command mode, the HW generates the SPI commands automatically and the memory segment is accessed as if doing a MMIO. Other SPI controllers call that mode linear addressing mode. For this purpose, we are adding below each crontoller an array of structs gathering for each SPI flash module, a segment rank, a MemoryRegion to handle the memory accesses and the associated SPI slave device, which should be a m25p80. Only the User mode is supported for now but we are preparing ground for the Command mode. The framework is sufficient to support Linux. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-8-git-send-email-clg@kaod.org [PMM: Use g_new0() rather than g_malloc0()] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04ast2400: add SMC controllers (FMC and SPI)Cédric Le Goater1-0/+79
The Aspeed AST2400 soc includes a static memory controller for the BMC which supports NOR, NAND and SPI flash memory modules. This controller has two modes : the SMC for the legacy interface which supports only one module and the FMC for the new interface which supports up to five modules. The AST2400 also includes a SPI only controller used for the host firmware, commonly called BIOS on Intel. It can be used in three mode : a SPI master, SPI slave and SPI pass-through Below is the initial framework for the SMC controller (FMC mode only) and the SPI controller: the sysbus object, MMIO for registers configuration and controls. Each controller has a SPI bus and a configurable number of CS lines for SPI flash slaves. The differences between the controllers are small, so they are abstracted using indirections on the register numbers. Only SPI flash modules are supported. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-7-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added one missing error_propagate] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04ssi: change ssi_slave_init to be a realize opsCédric Le Goater1-1/+1
This enables qemu to handle late inits and report errors. All the SSI slave routine names were changed accordingly. Code was modified to handle errors when possible (m25p80 and ssi-sd) Tested with the m25p80 slave object. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-2-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-07-21 08:29:41 +0000