aboutsummaryrefslogtreecommitdiff
path: root/include/hw/riscv
AgeCommit message (Collapse)AuthorFilesLines
2020-06-19hw/riscv: sifive_u: Hook a GPIO controllerBin Meng1-0/+19
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Add a new 'ngpio' propertyBin Meng1-0/+3
Add a new property to represent the number of GPIO pins supported by the GPIO controller. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-7-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Clean up the codesBin Meng1-3/+4
Do various minor clean-ups to the exisiting codes for: - coding convention conformance - remove unnecessary blank lines - spell SiFive correctly Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19riscv/opentitan: Connect the UART deviceAlistair Francis1-0/+13
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-19riscv/opentitan: Connect the PLIC deviceAlistair Francis1-0/+3
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-19sifive_e: Support the revB machineAlistair Francis1-0/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-15riscv: Fix type of SiFive[EU]SocState, member parent_objMarkus Armbruster2-2/+2
Device "riscv.sifive.e.soc" is a direct subtype of TYPE_DEVICE, but its instance struct SiFiveESoCState's member @parent_obj is SysBusDevice instead of DeviceState. Correct that. Same for "riscv.sifive.u.soc"'s instance struct SiFiveUSoCState. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200609122339.937862-21-armbru@redhat.com>
2020-06-03riscv: Initial commit of OpenTitan machineAlistair Francis1-0/+68
This adds a barebone OpenTitan machine to QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-03riscv/boot: Add a missing header includeAlistair Francis1-0/+1
As the functions declared in this header use the symbol_fn_t typedef itself declared in "hw/loader.h", we need to include it here to make the header file self-contained. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-03riscv: sifive_e: Manually define the machineAlistair Francis1-0/+4
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-03hw/riscv: spike: Remove deprecated ISA specific machinesAlistair Francis1-4/+2
The ISA specific Spike machines have been deprecated in QEMU since 4.1, let's finally remove them. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2020-04-29hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()Anup Patel1-2/+4
This patch adds an optional function pointer, "sym_cb", to riscv_load_firmware() which provides the possibility to access the symbol table during kernel loading. The pointer is ignored, if supplied with flat (non-elf) firmware image. The Spike board requires it locate the HTIF symbols from firmware ELF passed via "-bios" option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200427080644.168461-2-anup.patel@wdc.com Message-Id: <20200427080644.168461-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv/sifive_u: Add a serial property to the sifive_u machineBin Meng1-0/+1
At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv/sifive_u: Add a serial property to the sifive_u SoCAlistair Francis1-0/+2
At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to the sifive_u SoC to specify the board serial number. When not given, the default serial number 1 is used. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-27hw/riscv: Provide rdtime callback for TCG in CLINT emulationAnup Patel1-1/+2
This patch extends CLINT emulation to provide rdtime callback for TCG. This rdtime callback will be called wheneven TIME CSRs are read in privileged modes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-10riscv: virt: Use Goldfish RTC deviceAnup Patel1-0/+2
We extend QEMU RISC-V virt machine by adding Goldfish RTC device to it. This will allow Guest Linux to sync it's local date/time with Host date/time via RTC device. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-25hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()Zhuang, Siwei (Data61, Kensington NSW)1-1/+2
This patch adds an optional function pointer, "sym_cb", to riscv_load_kernel() which provides the possibility to access the symbol table during kernel loading. The pointer is ignored, if supplied with Image or uImage file. The Spike board requires the access to locate the HTIF symbols. Fixes: 0ac24d56c5e7 ("hw/riscv: Split out the boot functions") Buglink: https://bugs.launchpad.net/qemu/+bug/1835827 Signed-off-by: Siwei Zhuang <siwei.zhuang@data61.csiro.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-10-28riscv/virt: Add the PFlash CFI01 deviceAlistair Francis1-0/+3
Add the CFI01 PFlash to the RISC-V virt board. This is the same PFlash from the ARM Virt board and the implementation is based on the ARM Virt board. This allows users to specify flash files from the command line. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/virt: Manually define the machineAlistair Francis1-1/+6
Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to use the machine object to create RISCVVirtState. This is required to add children and aliases to the machine. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add the start-in-flash propertyAlistair Francis1-0/+2
Add a property that when set to true QEMU will jump from the ROM code to the start of flash memory instead of DRAM which is the default behaviour. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Manually define the machineAlistair Francis1-1/+6
Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to specify machine properties. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add QSPI memory regionAlistair Francis1-0/+1
The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no model of this in QEMU, so to allow boot firmware developers to use QEMU to target the Unleashed let's add a chunk of memory to represent the QSPI0 memory mapped flash. This can be targeted using QEMU's -device loader command line option. In the future we can look at adding a model for the is25wp256 flash. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add L2-LIM cache memoryAlistair Francis1-0/+1
On reset only a single L2 cache way is enabled, the others are exposed as memory that can be used by early boot firmware. This L2 region is generally disabled using the WayEnable register at a later stage in the boot process. To allow firmware to target QEMU and the HiFive Unleashed let's add the L2 LIM (LooselyIntegrated Memory). Ideally we would want to adjust the size of this chunk of memory as the L2 Cache Controller WayEnable register is incremented. Unfortunately I don't see a nice way to handle reducing or blocking out the L2 LIM while still allowing it be re returned to all enabled from a reset. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv: hw: Drop "clock-frequency" property of cpu nodesBin Meng3-9/+0
The "clock-frequency" property of cpu nodes isn't required. Drop it. This is to keep in sync with Linux kernel commit below: https://patchwork.kernel.org/patch/11133031/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernetBin Meng1-2/+1
In the past we did not have a model for PRCI, hence two handcrafted clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the purpose of supplying hard-coded clock frequencies. But now since we have added the PRCI support in QEMU, we don't need them any more. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Fix broken GEM supportBin Meng1-1/+2
At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Instantiate OTP memory with a serial numberBin Meng1-0/+3
This adds an OTP memory with a given serial number to the sifive_u machine. With such support, the upstream U-Boot for sifive_fu540 boots out of the box on the sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Implement a model for SiFive FU540 OTPBin Meng1-0/+80
This implements a simple model for SiFive FU540 OTP (One-Time Programmable) Memory interface, primarily for reading out the stored serial number from the first 1 KiB of the 16 KiB OTP memory reserved by SiFive for internal use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update UART base addresses and IRQsBin Meng1-2/+2
This updates the UART base address and IRQs to match the hardware. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodesBin Meng1-0/+10
Now that we have added a PRCI node, update existing UART and ethernet nodes to reference PRCI as their clock sources, to keep in sync with the Linux kernel device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Add PRCI block to the SoCBin Meng1-0/+3
Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Generate hfclk and rtcclk nodesBin Meng1-0/+2
To keep in sync with Linux kernel device tree, generate hfclk and rtcclk nodes in the device tree, to be referenced by PRCI node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Implement PRCI model for FU540Bin Meng1-0/+81
This adds a simple PRCI model for FU540 (sifive_u). It has different register layout from the existing PRCI model for FE310 (sifive_e). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update hart configuration to reflect the real FU540 SoCBin Meng1-1/+5
The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Set the minimum number of cpus to 2Bin Meng1-0/+2
It is not useful if we only have one management CPU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Set default CPUs to 2] Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hart: Add a "hartid-base" property to RISC-V hart arrayBin Meng1-0/+1
At present each hart's hartid in a RISC-V hart array is assigned the same value of its index in the hart array. But for a system that has multiple hart arrays, this is not the case any more. Add a new "hartid-base" property so that hartid number can be assigned based on the property value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: Add a sifive_cpu.h to include both E and U cpu type definesBin Meng3-12/+33
Group SiFive E and U cpu type defines into one header file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: prci: Update the PRCI register block sizeBin Meng1-0/+2
Currently the PRCI register block size is set to 0x8000, but in fact 0x1000 is enough, which is also what the manual says. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h}Bin Meng2-71/+69
Current SiFive PRCI model only works with sifive_e machine, as it only emulates registers or PRCI block in the FE310 SoC. Rename the file name to make it clear that it is for sifive_e. This also prefix "sifive_e"/"SIFIVE_E" for all macros, variables and functions. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_test: Add reset functionalityBin Meng1-1/+2
This adds a reset opcode for sifive_test device to trigger a system reset for testing purpose. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: Add a helper routine for finding firmwareBin Meng1-0/+1
This adds a helper routine for finding firmware. It is currently used only for "-bios default" case. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: plic: Remove unused interrupt functionsAlistair Francis1-3/+0
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16include: Make headers more self-containedMarkus Armbruster11-1/+23
Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-18hw/riscv: Load OpenSBI as the default firmwareAlistair Francis1-0/+3
If the user hasn't specified a firmware to load (with -bios) or specified no bios (with -bios none) then load OpenSBI by default. This allows users to boot a RISC-V kernel with just -kernel. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27hw/riscv: Add support for loading a firmwareAlistair Francis1-0/+2
Add support for loading a firmware file for the virt machine and the SiFive U. This can be run with the following command: qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel vmlinux Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27hw/riscv: Split out the boot functionsAlistair Francis1-0/+27
Split the common RISC-V boot functions into a seperate file. This allows us to share the common code. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-23RISC-V: Fix a memory leak when realizing a sifive_ePalmer Dabbelt1-0/+2
Coverity pointed out a memory leak in riscv_sifive_e_soc_realize(), where a pair of recently added MemoryRegion instances would not be freed if there were errors elsewhere in the function. The fix here is to simply not use dynamic allocation for these instances: there's always one of each in SiFiveESoCState, so instead we just include them within the struct. Fixes: 30efbf330a45 ("SiFive RISC-V GPIO Device") Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2019-06-23sifive_prci: Read and write PRCI registersNathaniel Graff1-0/+32
Writes to the SiFive PRCI registers are preserved while leaving the ready bits set for the HFX/HFR oscillators and the lock bit set for the PLL. Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com> Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.1 at 2025-09-19 23:16:54 +0000