aboutsummaryrefslogtreecommitdiff
path: root/include/hw/block
AgeCommit message (Collapse)AuthorFilesLines
2024-03-19aspeed/smc: Only wire flash devices at resetCédric Le Goater1-0/+2
The Aspeed machines have many Static Memory Controllers (SMC), up to 8, which can only drive flash memory devices. Commit 27a2c66c92ec ("aspeed/smc: Wire CS lines at reset") tried to ease the definitions of these devices by allowing flash devices from the command line to be attached to a SSI bus. For that, the wiring of the CS lines of the Aspeed SMC controller was moved at reset. Two assumptions are made though, first that the device has a SSI_GPIO_CS GPIO line, which is not always the case, and second that it is a flash device. Correct this problem by ensuring that the devices attached to the bus are of the correct flash type. This fixes a QEMU abort when devices without a CS line, such as the max111x, are passed on the command line. While at it, export TYPE_M25P80 used in the Xilinx Versal Virtual machine. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2228 Fixes: 27a2c66c92ec ("aspeed/smc: Wire CS lines at reset") Reported-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> [ clg: minor fixes in the commit log ] Signed-off-by: Cédric Le Goater <clg@redhat.com>
2024-02-14hw/block/fdc-isa: Implement relocation and enabling/disabling for TYPE_ISA_FDCBernhard Beschow1-0/+3
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or disabling their SuperI/O functions via software. So far this is not implemented. Prepare for that by adding isa_fdc_set_{enabled,iobase}. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20240114123911.4877-8-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-01-30hw/block/block.c: improve confusing blk_check_size_and_read_all() errorManos Pitsidianakis1-2/+2
In cases where a device tries to read more bytes than the block device contains, the error is vague: "device requires X bytes, block backend provides Y bytes". This patch changes the errors of this function to include the block backend name, the device id and device type name where appropriate. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Message-id: 7260eadff22c08457740117c1bb7bd2b4353acb9.1706598705.git.manos.pitsidianakis@linaro.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-06swim: update IWM/ISM register block decodingMark Cave-Ayland1-3/+5
Update the IWM/ISM register block decoding to match the description given in the "SWIM Chip Users Reference". This allows us to validate the device response to the guest OS which currently only does just enough to indicate that the floppy drive is unavailable. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20231004083806.757242-14-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-10-06swim: split into separate IWM and ISM register blocksMark Cave-Ayland1-10/+5
The swim chip provides an implementation of both Apple's IWM and ISM floppy disk controllers. Split the existing implementation into separate register banks for each controller, whilst also switching the IWM registers from 16-bit to 8-bit as implemented in real hardware. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20231004083806.757242-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-09-01m25p80: Introduce an helper to retrieve the BlockBackend of a deviceCédric Le Goater1-0/+4
It will help in getting rid of some drive_get(IF_MTD) calls by retrieving the BlockBackend directly from the m25p80 device. Cc: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-24hw/block: replace TABs with spaceYeqi Fu1-10/+10
Bring the block files in line with the QEMU coding style, with spaces for indentation. This patch partially resolves the issue 371. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371 Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com> Message-Id: <20230314095001.13801-1-fufuyqqqqqq@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-20include/hw/block: Include hw/block/block.h where neededMarkus Armbruster1-0/+1
hw/block/swim.h needs BlockConf. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221221133551.3967339-4-armbru@redhat.com>
2022-09-30block: add missed block_acct_setup with new block device init procedureDenis V. Lunev1-1/+6
Commit 5f76a7aac156ca75680dad5df4a385fd0b58f6b1 is looking harmless from the first glance, but it has changed things a lot. 'libvirt' uses it to detect that it should follow new initialization way and this changes things considerably. With this procedure followed, blockdev_init() is not called anymore and thus block_acct_setup() helper is not called. This means in particular that defaults for block accounting statistics are changed and account_invalid/account_failed are actually initialized as false instead of true originally. This commit changes things to match original world. There are the following constraints: * new default value in block_acct_init() is set to true * block_acct_setup() inside blockdev_init() is called before blkconf_apply_backend_options() * thus newly created option in block device properties has precedence if specified Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> CC: Peter Krempa <pkrempa@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220824095044.166009-3-den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-06-11hw/block/fdc-sysbus: Always mark sysbus floppy controllers as not having DMAPeter Maydell1-2/+1
The sysbus floppy controllers (devices sysbus-fdc and sun-fdtwo) don't support DMA. The core floppy controller code expects this to be indicated by setting FDCtrl::dma_chann to -1. This used to be done in the device instance_init functions sysbus_fdc_initfn() and sun4m_fdc_initfn(), but in commit 1430759ec3e we refactored this code and accidentally lost the setting of dma_chann. For sysbus-fdc this has no ill effects because we were redundantly also setting dma_chann in fdctrl_init_sysbus(), but for sun-fdtwo this means that guests which try to enable DMA on the floppy controller will cause QEMU to crash because FDCtrl::dma is NULL. Set dma_chann to -1 in the common instance init, and remove the redundant code in fdctrl_init_sysbus() that is also setting it. There is a six-year-old FIXME comment in the jazz board code to the effect that in theory it should support doing DMA via a custom DMA controller. If anybody ever chooses to fix that they can do it by adding support for setting both FDCtrl::dma_chann and FDCtrl::dma. (A QOM link property 'dma-controller' on the sysbus device which can be set to an instance of IsaDmaClass is probably the way to go.) Fixes: 1430759ec3 ("hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/958 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220505101842.2757905-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-06block: Add backend_defaults propertyAkihiko Odaki1-0/+3
backend_defaults property allow users to control if default block properties should be decided with backend information. If it is off, any backend information will be discarded, which is suitable if you plan to perform live migration to a different disk backend. If it is on, a block device may utilize backend information more aggressively. By default, it is auto, which uses backend information for block sizes and ignores the others, which is consistent with the older versions. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-id: 20210705130458.97642-2-akihiko.odaki@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-05-02vmstate: Constify some VMStateDescriptionsKeqian Zhu1-1/+1
Constify vmstate_ecc_state and vmstate_x86_cpu. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210408140706.23412-1-zhukeqian1@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost1-0/+1
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10Clean up includesMarkus Armbruster1-1/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the changes to the following files manually reverted: contrib/libvhost-user/libvhost-user-glib.h contrib/libvhost-user/libvhost-user.c contrib/libvhost-user/libvhost-user.h contrib/plugins/hotblocks.c contrib/plugins/hotpages.c contrib/plugins/howvec.c contrib/plugins/lockstep.c linux-user/mips64/cpu_loop.c linux-user/mips64/signal.c linux-user/sparc64/cpu_loop.c linux-user/sparc64/signal.c linux-user/x86_64/cpu_loop.c linux-user/x86_64/signal.c target/s390x/gen-features.c tests/fp/platform.h tests/migration/s390x/a-b-bios.c tests/plugin/bb.c tests/plugin/empty.c tests/plugin/insn.c tests/plugin/mem.c tests/test-rcu-simpleq.c tests/test-rcu-slist.c tests/test-rcu-tailq.c tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not to include osdep.h intentionally. The remaining reverts are the same as in commit bbfff19688d. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113061216.2483385-1-armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Alexander Bulekov <alxndr@bu.edu>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost2-15/+5
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost2-7/+10
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost2-4/+7
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27swim: Rename struct SWIM to SwimEduardo Habkost1-3/+3
Currently we have a SWIM typedef and a SWIM type checking macro, but OBJECT_DECLARE* would transform the SWIM macro into a function, and the function name would conflict with the SWIM typedef name. Rename the struct and typedef to "Swim". This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Laurent Vivier <laurent@vivier.eu> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-50-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-06-25Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-2/+1
virtio,acpi,pci: fixes, cleanups. Fixes, cleanups in ACPI, PCI, virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 25 Jun 2020 07:48:47 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge Stop vhost-user sending uninitialized mmap_offsets docs/specs/tpm: ACPI boot now supported for TPM/ARM arm/acpi: Add the TPM2.0 device under the DSDT acpi: Some build_tpm2() code reshape tests/acpi: update expected data files acpi: q35: drop _SB.PCI0.ISA.LPCD opregion. acpi: drop build_piix4_pm() acpi: drop serial/parallel enable bits from dsdt acpi: simplify build_isa_devices_aml() acpi: factor out fw_cfg_add_acpi_dsdt() acpi: move aml builder code for i8042 (kbd+mouse) device floppy: move cmos_get_fd_drive_type() from pc floppy: make isa_fdc_get_drive_max_chs static acpi: move aml builder code for floppy device acpi: bios-tables-test: show more context on asl diffs qtest: allow DSDT acpi table changes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-24floppy: move cmos_get_fd_drive_type() from pcGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Message-Id: <20200619091905.21676-6-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-24floppy: make isa_fdc_get_drive_max_chs staticGerd Hoffmann1-2/+0
acpi aml generator needs this, but it is in floppy code now so we can make the function static. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Message-Id: <20200619091905.21676-5-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-23fdc: Open-code fdctrl_init_isa()Markus Armbruster1-1/+0
Helper function fdctrl_init_isa() is less than helpful: one of three places creating "isa-fdc" devices use it. Open-code it there, and drop the function. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200622094227.1271650-6-armbru@redhat.com>
2020-06-23fdc: Reject clash between -drive if=floppy and -global isa-fdcMarkus Armbruster1-0/+1
The floppy controller devices desugar their drive properties into floppy devices (since commit a92bd191a4 "fdc: Move qdev properties to FloppyDrive", v2.8.0). This involves some bad magic in fdctrl_connect_drives(), and exists for backward compatibility. The functions for boards to create floppy controller devices fdctrl_init_isa(), fdctrl_init_sysbus(), and sun4m_fdctrl_init() desugar -drive if=floppy to these floppy controller drive properties. If you use both -drive if=floppy (or its -fda / -fdb sugar) and -global isa-fdc for the same floppy device, -global silently loses the conflict, and both backends involved end up with the floppy device frontend attached, as demonstrated by iotest 172 (see commit before previous). This is wrong. Desugar -drive if=floppy straight to floppy devices instead, with helper fdctrl_init_drives(). The conflict now gets rejected cleanly: first, fdctrl_connect_drives() creates the floppy for the controller's property, then fdctrl_init_drives() attempts to create the floppy for -drive if=floppy, but fails because the unit is already in use. Output of iotest 172 changes in three ways: 1. The clash gets rejected. 2. In one test case, "info qtree" has the floppy devices swapped, and "info block" has their QOM paths swapped. This is because the floppy device for -fda now gets created after the one for -global isa-fdc.driveB. 3. The error message for -global floppy.drive=floppy0 changes. Before the patch, we set isa-fdc.driveA to -fda's block backend, then create the floppy device for it, then move the backend from isa-fdc.driveA to floppy.drive. Floppy creation fails when applying -global floppy.drive=floppy0, because floppy0 is still attached to isa-fdc. After the patch, we create the floppy for -fda, then set its drive property to floppy0. Now floppy creation succeeds, but setting the drive property fails, because -global already set it. Yes, this is exasperatingly complicated. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200622094227.1271650-5-armbru@redhat.com>
2020-06-17block: make BlockConf size props 32bit and accept size suffixesRoman Kagan1-6/+6
Convert all size-related properties in BlockConf to 32bit. This will accommodate bigger block sizes (in a followup patch). This also allows to make them all accept size suffixes, either via DEFINE_PROP_BLOCKSIZE or via DEFINE_PROP_SIZE32. Also, since min_io_size is exposed to the guest by scsi and virtio-blk devices as an uint16_t in units of logical blocks, introduce an additional check in blkconf_blocksizes to prevent its silent truncation. Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru> Message-Id: <20200528225516.1676602-7-rvkagan@yandex-team.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17block: consolidate blocksize properties consistency checksRoman Kagan1-1/+1
Several block device properties related to blocksize configuration must be in certain relationship WRT each other: physical block must be no smaller than logical block; min_io_size, opt_io_size, and discard_granularity must be a multiple of a logical block. To ensure these requirements are met, add corresponding consistency checks to blkconf_blocksizes, adjusting its signature to communicate possible error to the caller. Also remove the now redundant consistency checks from the specific devices. Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20200528225516.1676602-3-rvkagan@yandex-team.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-31block: Support providing LCHS from userSam Eiderman1-1/+5
Add logical geometry variables to BlockConf. A user can now supply "lcyls", "lheads" & "lsecs" for any HD device that supports CHS ("cyls", "heads", "secs"). These devices include: * ide-hd * scsi-hd * virtio-blk-pci In future commits we will use the provided LCHS and pass it to the BIOS through fw_cfg to be supplied using INT13 routines. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31block: Refactor macros - fix tabbingSam Eiderman1-8/+8
Fixing tabbing in block related macros. Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-28hw/m68k: add a dummy SWIM floppy controllerLaurent Vivier1-0/+76
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of the 680x0 Macintosh. This patch introduces only the basic support: it allows to switch from IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux driver happy. It cannot read any floppy image. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191026164546.30020-10-laurent@vivier.eu>
2019-08-16Include exec/memory.h slightly lessMarkus Armbruster1-1/+1
Drop unnecessary inclusions from headers. Downgrade a few more to exec/hwaddr.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-17-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-1/+0
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16include: Make headers more self-containedMarkus Armbruster2-0/+3
Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-04block: Add qdev_prop_drive_iothread property typeKevin Wolf1-2/+5
Some qdev block devices have support for iothreads and take care of the AioContext they are running in, but most devices don't know about any of this. For the latter category, the qdev drive property must make sure that their BlockBackend is in the main AioContext. Unfortunately, while the current code just does the same thing for devices that do support iothreads, this is not correct and it would show as soon as we actually try to keep a consistent AioContext assignment across all nodes and users of a block graph subtree: If a node is already in a non-default AioContext because of one of its users, attaching a new device should still be possible if that device can work in the same AioContext. Switching the node back to the main context first and only then into the device AioContext causes failure (because the existing user wouldn't allow the switch to the main context). So devices that support iothreads need a different kind of drive property that leaves the node in its current AioContext, but by using this type, the device promises to check later that it can work with this context. This patch adds the qdev infrastructure that allows devices to signal that they handle iothreads and qdev should leave the AioContext alone. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-07pflash_cfi01: New pflash_cfi01_legacy_drive()Markus Armbruster1-0/+1
Factored out of pc_system_firmware_init() so the next commit can reuse it in hw/arm/virt.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190416091348.26075-3-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-26pflash: Require backend size to match device, improve errorsMarkus Armbruster1-1/+6
We reject undersized backends with a rather enigmatic "failed to read the initial flash content" error. For instance: $ qemu-system-ppc64 -S -display none -M sam460ex -drive if=pflash,format=raw,file=eins.img qemu-system-ppc64: Initialization of device cfi.pflash02 failed: failed to read the initial flash content We happily accept oversized images, ignoring their tail. Throwing away parts of firmware that way is pretty much certain to end in an even more enigmatic failure to boot. Require the backend's size to match the device's size exactly. Report mismatch like this: qemu-system-ppc64: Initialization of device cfi.pflash01 failed: device requires 1048576 bytes, block backend provides 512 bytes Improve the error for actual read failures to "can't read block backend". To avoid duplicating even more code between the two pflash device models, do all that in new helper blk_check_size_and_read_all(). The error reporting can still be confusing. For instance: qemu-system-ppc64 -S -display none -M taihu -drive if=pflash,format=raw,file=eins.img -drive if=pflash,unit=1,format=raw,file=zwei.img qemu-system-ppc64: Initialization of device cfi.pflash02 failed: device requires 2097152 bytes, block backend provides 512 bytes Leaves the user guessing which of the two -drive is wrong. Mention the issue in a TODO comment. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190319163551.32499-2-armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11pflash_cfi01: Add pflash_cfi01_get_blk() helperPhilippe Mathieu-Daudé1-0/+1
Add an helper to access the opaque struct PFlashCFI01. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190308131445.17502-9-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 2Markus Armbruster1-2/+2
Our pflash devices are simplistically modelled has having "num-blocks" sectors of equal size "sector-length". Real hardware commonly has sectors of different sizes. How our "sector-length" property is related to the physical device's multiple sector sizes is unclear. Helper functions pflash_cfi01_register() and pflash_cfi02_register() create a pflash device, set properties including "sector-length" and "num-blocks", and realize. They take parameters @size, @sector_len and @nb_blocs. QOMification left parameter @size unused. Obviously, @size should match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs. All callers satisfy this. Remove @nb_blocs and compute it from @size and @sector_len. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-16-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 1Markus Armbruster1-2/+2
QOMification left parameter @qdev unused in pflash_cfi01_register() and pflash_cfi02_register(). All callers pass NULL. Remove. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-15-armbru@redhat.com>
2019-03-11hw: Use PFLASH_CFI0{1,2} and TYPE_PFLASH_CFI0{1,2}Markus Armbruster1-0/+4
We have two open-coded copies of macro PFLASH_CFI01(). Move the macro to the header, so we can ditch the copies. Move PFLASH_CFI02() to the header for symmetry. We define macros TYPE_PFLASH_CFI01 and TYPE_PFLASH_CFI02 for type name strings, then mostly use the strings. If the macros are worth defining, they are worth using. Replace the strings by the macros. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-6-armbru@redhat.com>
2019-03-11pflash: Rename *CFI_PFLASH* to *PFLASH_CFI*Markus Armbruster1-2/+2
pflash_cfi01.c and pflash_cfi02.c start their identifiers with pflash_cfi01_ and pflash_cfi02_ respectively, except for CFI_PFLASH01(), TYPE_CFI_PFLASH01, CFI_PFLASH02(), TYPE_CFI_PFLASH02. Rename for consistency. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-5-armbru@redhat.com>
2019-03-11pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02Markus Armbruster1-21/+30
flash.h's incomplete struct pflash_t is completed both in pflash_cfi01.c and in pflash_cfi02.c. The complete types are incompatible. This can hide type errors, such as passing a pflash_t created with pflash_cfi02_register() to pflash_cfi01_get_memory(). Furthermore, POSIX reserves typedef names ending with _t. Rename the two structs to PFlashCFI01 and PFlashCFI02. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-2-armbru@redhat.com>
2018-08-15block: Remove deprecated -drive option serialKevin Wolf1-1/+0
This reinstates commit b0083267444a5e0f28391f6c2831a539f878d424, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive option serial"Cornelia Huck1-0/+1
This reverts commit b0083267444a5e0f28391f6c2831a539f878d424. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Remove deprecated -drive option serialKevin Wolf1-1/+0
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster2-2/+2
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster2-0/+2
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2017-12-19hw/block: Fix the return typeMao Zhongyi1-2/+2
When the function no success value to transmit, it usually make the function return void. It has turned out not to be a success, because it means that the extra local_err variable and error_propagate() will be needed. It leads to cumbersome code, therefore, transmit success/ failure in the return value is worth. So fix the return type of blkconf_apply_backend_options(), blkconf_geometry() and virtio_blk_data_plane_create() to avoid it. Cc: John Snow <jsnow@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: ac0edc1fc70c4457e5cec94405eb7d1f89f9c2c1.1511317952.git.maozy.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-28hw/block: Introduce share-rw qdev propertyKevin Wolf1-1/+4
By default, don't allow another writer for block devices that are attached to a guest device. For the cases where this setup is intended (e.g. using a cluster filesystem on the disk), the new option can be used to allow it. This change affects only devices using DEFINE_BLOCK_PROPERTIES(). Devices directly using DEFINE_PROP_DRIVE() still accept writers unconditionally. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28hw/block: Request permissionsKevin Wolf1-1/+2
This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
generated by cgit v1.1 at 2024-12-28 18:56:53 +0000