aboutsummaryrefslogtreecommitdiff
path: root/include/exec
AgeCommit message (Collapse)AuthorFilesLines
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini1-0/+60
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-21memory: Add address_space_init_shareable()Peter Crosthwaite1-0/+18
This will either create a new AS or return a pointer to an already existing equivalent one, if we have already created an AS for the specified root memory region. The motivation is to reuse address spaces as much as possible. It's going to be quite common that bus masters out in device land have pointers to the same memory region for their mastering yet each will need to create its own address space. Let the memory API implement sharing for them. Aside from the perf optimisations, this should reduce the amount of redundant output on info mtree as well. Thee returned value will be malloced, but the malloc will be automatically freed when the AS runs out of refs. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [PMM: dropped check for NULL root as unused; added doc-comment; squashed Peter C's reference-counting patch into this one; don't compare name string when deciding if we can share ASes; read as->malloced before the unref of as->root to avoid possible read-after-free if as->root was the owner of as] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21exec.c: Add cpu_get_address_space()Peter Maydell1-0/+9
Add a function to return the AddressSpace for a CPU based on its numerical index. (Callers outside exec.c don't have access to the CPUAddressSpace struct so can't just fish it out of the CPUState struct directly.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21exec.c: Pass MemTxAttrs to iotlb_to_region so it uses the right ASPeter Maydell1-1/+1
Pass the MemTxAttrs for the memory access to iotlb_to_region(); this allows it to determine the correct AddressSpace to use for the lookup. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21cputlb.c: Use correct address space when looking up MemoryRegionSectionPeter Maydell1-2/+2
When looking up the MemoryRegionSection for the new TLB entry in tlb_set_page_with_attrs(), use cpu_asidx_from_attrs() to determine the correct address space index for the lookup, and pass it into address_space_translate_for_iotlb(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21exec-all.h: Document tlb_set_page_with_attrs, tlb_set_pagePeter Maydell1-3/+31
Add documentation comments for tlb_set_page_with_attrs() and tlb_set_page(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21exec.c: Allow target CPUs to define multiple AddressSpacesPeter Maydell1-0/+4
Allow multiple calls to cpu_address_space_init(); each call adds an entry to the cpu->ases array at the specified index. It is up to the target-specific CPU code to actually use these extra address spaces. Since this multiple AddressSpace support won't work with KVM, add an assertion to avoid confusing failures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21exec.c: Don't set cpu->as until cpu_address_space_initPeter Maydell1-1/+15
Rather than setting cpu->as unconditionally in cpu_exec_init (and then having target-i386 override this later), don't set it until the first call to cpu_address_space_init. This requires us to initialise the address space for both TCG and KVM (KVM doesn't need the AS listener but it does require cpu->as to be set). For target CPUs which don't set up any address spaces (currently everything except i386), add the default address_space_memory in qemu_init_vcpu(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-09ivshmem: Store file descriptor for vhost-user negotiationTetsuya Mukawa1-0/+1
If virtio-net driver allocates memory in ivshmem shared memory, vhost-net will work correctly, but vhost-user will not work because a fd of shared memory will not be sent to vhost-user backend. This patch fixes ivshmem to store file descriptor of shared memory. It will be used when vhost-user negotiates vhost-user backend. Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-17memory: try to inline constant-length readsPaolo Bonzini2-18/+57
memcpy can take a large amount of time for small reads and writes. Handle the common case of reading s/g descriptors from memory (there is no corresponding "write" case that is as common, because writes often use address_space_st* functions) by inlining the relevant parts of address_space_read into the caller. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17memory: inline a few small accessorsPaolo Bonzini1-4/+18
These are used in the address_space_* fast paths. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17memory: extract first iteration of address_space_read and address_space_writePaolo Bonzini1-0/+6
We want to inline the case where there is only one iteration, because then the compiler can also inline the memcpy. As a start, extract everything after the first address_space_translate call. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17memory: avoid unnecessary object_ref/unrefPaolo Bonzini1-0/+1
For the common case of DMA into non-hotplugged RAM, it is unnecessary but expensive to do object_ref/unref. Add back an owner field to MemoryRegion, so that these memory regions can skip the reference counting. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17memory: reorder MemoryRegion fieldsPaolo Bonzini1-10/+14
Order fields so that all fields accessed during a RAM read/write fit in the same cache line. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17exec: always call qemu_get_ram_ptr within rcu_read_lockPaolo Bonzini1-2/+7
Simplify the code and document the assumption. The only caller that is not within rcu_read_lock is memory_region_get_ram_ptr. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17exec: Eliminate qemu_ram_free_from_ptr()Eduardo Habkost1-1/+0
Replace qemu_ram_free_from_ptr() with qemu_ram_free(). The only difference between qemu_ram_free_from_ptr() and qemu_ram_free() is that g_free_rcu() is used instead of call_rcu(reclaim_ramblock). We can safely replace it because: * RAM blocks allocated by qemu_ram_alloc_from_ptr() always have RAM_PREALLOC set; * reclaim_ramblock(block) will do nothing except g_free(block) if RAM_PREALLOC is set at block->flags. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446844805-14492-2-git-send-email-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02translate-all: ensure host page mask is always extended with 1'sPaolo Bonzini1-3/+5
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05). In that patch sizes are masked against qemu_host_page_size/mask which are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space might be bigger than 4GB on Xen. Since ram_addr_t is not available on user-mode emulation targets, ensure that we get a sign extension when masking away the low bits of the address. Remove the ~10 year old scary comment that the type of these variables is probably wrong, with another equally scary comment. The new comment however does not have "???" in it, which is arguably an improvement. For completeness use the alignment macros in linux-user and bsd-user instead of manually doing an &. linux-user and bsd-user are not affected by the Xen issue, however. Reviewed-by: Juan Quintela <quintela@redhat.com> Reported-by: Anthony PERARD <anthony.perard@citrix.com> Fixes: 4ed023ce2a39ab5812d33cf4d819def168965a7f Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10qemu_ram_block_by_nameDr. David Alan Gilbert1-0/+1
Add a function to find a RAMBlock by name; use it in two of the places that already open code that loop; we've got another use later in postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10qemu_ram_block_from_hostDr. David Alan Gilbert2-2/+3
Postcopy sends RAMBlock names and offsets over the wire (since it can't rely on the order of ramaddr being the same), and it starts out with HVA fault addresses from the kernel. qemu_ram_block_from_host translates a HVA into a RAMBlock, an offset in the RAMBlock and the global ram_addr_t value. Rewrite qemu_ram_addr_from_host to use qemu_ram_block_from_host. Provide qemu_ram_get_idstr since its the actual name text sent on the wire. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Move page_size_init earlierDr. David Alan Gilbert1-1/+0
The HOST_PAGE_ALIGN macros don't work until the page size variables have been set up; later in postcopy I use those macros in the RAM code, and it can be triggered using -object. Fix this by initialising page_size_init() earlier - it's currently initialised inside the accelerators, move it up into vl.c. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-05cpu-exec: allow temporary disabling icountPavel Dovgalyuk1-0/+1
This patch is required for deterministic replay to generate an exception by trying executing an instruction without changing icount. It adds new flag to TB for disabling icount while translating it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162359.8676.77011.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19hw/pci: Introduce pci_requester_id()Pavel Fedin1-2/+2
For GICv3 ITS implementation we are going to use requester IDs in KVM IRQ routing code. This patch introduces reusable convenient way to obtain this ID from the device pointer. The new function is now used in some places, where the same calculation was used. MemTxAttrs.stream_id also renamed to requester_id in order to better reflect semantics of the field. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <5814bcb03a297f198e796b13ed9c35059c52f89b.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12exec: remove non-TCG stuff from exec-all.h header.Paolo Bonzini2-6/+1
The header is included from basically everywhere, thanks to cpu.h. It should be moved to the (TCG only) files that actually need it. As a start, remove non-TCG stuff. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12exec.c: Collect AddressSpace related fields into a CPUAddressSpace structPeter Maydell1-1/+1
Gather up all the fields currently in CPUState which deal with the CPU's AddressSpace into a separate CPUAddressSpace struct. This paves the way for allowing the CPU to know about more than one AddressSpace. The rearrangement also allows us to make the MemoryListener a directly embedded object in the CPUAddressSpace (it could not be embedded in CPUState because 'struct MemoryListener' isn't defined for the user-only builds). This allows us to resolve the FIXME in tcg_commit() by going directly from the MemoryListener to the CPUAddressSpace. This patch extracts the actual update of the cached dispatch pointer from cpu_reload_memory_map() (which is renamed accordingly to cpu_reloading_memory_map() as it is only responsible for breaking cpu-exec.c's RCU critical section now). This lets us keep the definition of the CPUAddressSpace struct private to exec.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1443709790-25180-4-git-send-email-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-08Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20151007.0' ↵Peter Maydell1-0/+13
into staging VFIO updates 2015-10-07 - Change platform device IRQ setup sequence for compatibility with upcoming IRQ forwarding (Eric Auger) - Extensions to support vfio-pci devices on spapr-pci-host-bridge (David Gibson) [clang problem patch dropped] # gpg: Signature made Wed 07 Oct 2015 16:30:52 BST using RSA key ID 3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" * remotes/awilliam/tags/vfio-update-20151007.0: vfio: Allow hotplug of containers onto existing guest IOMMU mappings memory: Allow replay of IOMMU mapping notifications vfio: Record host IOMMU's available IO page sizes vfio: Check guest IOVA ranges against host IOMMU capabilities vfio: Generalize vfio_listener_region_add failure path vfio: Remove unneeded union from VFIOContainer hw/vfio/platform: do not set resamplefd for edge-sensitive IRQS hw/vfio/platform: change interrupt/unmask fields into pointer hw/vfio/platform: irqfd setup sequence update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-07tcg: Adjust CODE_GEN_AVG_BLOCK_SIZERichard Henderson1-5/+6
At present, the "average" guestimate of TB size is way too small, leading to many unused entries in the pre-allocated TB array. For a guest with 1GB ram, we're currently allocating 256MB for the array. Survey arm, alpha, aarch64, ppc, sparc, i686, x86_64 guests running on x86_64 and ppc64 hosts and select a new average. The size of the array drops to 81MB with no more flushing than before. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Check for overflow via highwater markRichard Henderson1-6/+0
We currently pre-compute an worst case code size for any TB, which works out to be 122kB. Since the average TB size is near 1kB, this wastes quite a lot of storage. Instead, check for overflow in between generating code for each opcode. The overhead of the check isn't measurable and wastage is minimized. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson1-1/+0
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Save insn data and use it in cpu_restore_state_from_tbRichard Henderson1-0/+1
We can now restore state without retranslation. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson1-1/+1
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Merge cpu_gen_code into tb_gen_codeRichard Henderson1-2/+0
As it's only caller, this tidies things a bit. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-05memory: Allow replay of IOMMU mapping notificationsDavid Gibson1-0/+13
When we have guest visible IOMMUs, we allow notifiers to be registered which will be informed of all changes to IOMMU mappings. This is used by vfio to keep the host IOMMU mappings in sync with guest IOMMU mappings. However, unlike with a memory region listener, an iommu notifier won't be told about any mappings which already exist in the (guest) IOMMU at the time it is registered. This can cause problems if hotplugging a VFIO device onto a guest bus which had existing guest IOMMU mappings, but didn't previously have an VFIO devices (and hence no host IOMMU mappings). This adds a memory_region_iommu_replay() function to handle this case. It replays any existing mappings in an IOMMU memory region to a specified notifier. Because the IOMMU memory region doesn't internally remember the granularity of the guest IOMMU it has a small hack where the caller must specify a granularity at which to replay mappings. If there are finer mappings in the guest IOMMU these will be reported in the iotlb structures passed to the notifier which it must handle (probably causing it to flag an error). This isn't new - the VFIO iommu notifier must already handle notifications about guest IOMMU mappings too short for it to represent in the host IOMMU. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-16include/exec: Move cputlb exec.c defs outPeter Crosthwaite2-16/+18
Move the architecture agnostic function prototypes for exec.c out of cputlb.h to exec-all.h. This allows hiding of the arch specific cputlb.h from exec.c which should be getting close to having no architecture specifics. Prepares support for multi-arch, which will have a minimal cpu.h that services exec.c but not cputlb.h. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <b4fe754c58c860315e35d44430c26b1c967ce2c9.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16cputlb: Change tlb_set_dirty() arg to cpuPeter Crosthwaite1-1/+1
Change tlb_set_dirty() to accept a CPU instead of an env pointer. This allows for removal of another CPUArchState usage from prototypes that need to be QOMified. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <d2b1dcbe7945112989861d8ba7369449c11cc273.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16cputlb: move CPU_LOOP() for tlb_reset() to exec.cPeter Crosthwaite1-1/+1
To prepare for multi-arch, cputlb.c should only have awareness of one single architecture. This means it should not have access to the full CPU lists which may be heterogeneous. Instead, push the CPU_LOOP() up to the one and only caller in exec.c. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <db06dc6c49f8970caaf116d0385f00ee10a56f2f.1441614289.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell4-94/+51
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11cpu-exec: introduce loop exit with restore functionPavel Dovgalyuk1-0/+1
This patch introduces loop exit function, which also restores guest CPU state according to the value of host program counter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11softmmu: remove now unused functionsPavel Dovgalyuk1-19/+0
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can drop the old helper_ld/st functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11softmmu: add helper function to pass through retaddrPavel Dovgalyuk2-8/+76
This patch introduces several helpers to pass return address which points to the TB. Correct return address allows correct restoring of the guest PC and icount. These functions should be used when helpers embedded into TB invoke memory operations. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11tlb: Add "ifetch" argument to cpu_mmu_index()Benjamin Herrenschmidt1-2/+2
This is set to true when the index is for an instruction fetch translation. The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS acessors. All targets ignore it for now, and all other callers pass "false". This will allow targets who wish to split the mmu index between instruction and data accesses to do so. A subsequent patch will do just that for PowerPC. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11typofixes - v4Veres Lajos1-1/+1
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange1-1/+1
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-09exec: make mmap_lock/mmap_unlock globally availablePaolo Bonzini1-0/+6
There is some iffy lock hierarchy going on in translate-all.c. To fix it, we need to take the mmap_lock in cpu-exec.c. Make the functions globally available. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09remove unused spinlock.KONRAD Frederic1-49/+0
This just removes spinlock as it is not used anymore. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-Id: <1439220437-23957-6-git-send-email-fred.konrad@greensocs.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09replace spinlock by QemuMutex.KONRAD Frederic1-2/+2
spinlock is only used in two cases: * cpu-exec.c: to protect TranslationBlock * mem_helper.c: for lock helper in target-i386 (which seems broken). It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly, with an #ifdef. The #ifdef will be removed when multithreaded TCG will need the mutex as well. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com> Signed-off-by: Emilio G. Cota <cota@braap.org> [Merge Emilio G. Cota's patch to remove volatile. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09Move RAMBlock and ram_list to ram_addr.hDr. David Alan Gilbert2-41/+40
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1439547914-18249-1-git-send-email-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09tcg: signal-free qemu_cpu_kickPaolo Bonzini1-2/+2
Signals are slow and do not exist on Win32. The previous patches have done most of the legwork to introduce memory barriers (some of them were even there already for the sake of Windows!) and we can now set the flags directly in the iothread. qemu_cpu_kick_thread is not used anymore on TCG, since the TCG thread is never outside usermode while the CPU is running (not halted). Instead run the content of the signal handler (now in qemu_cpu_kick_no_halt) directly. qemu_cpu_kick_no_halt is also used in qemu_mutex_lock_iothread to avoid the overhead of qemu_cond_broadcast. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09tcg: introduce tcg_current_cpuPaolo Bonzini1-0/+1
This is already useful on Windows in order to remove tls.h, because accesses to current_cpu are done from a different thread on that platform. It will be used on POSIX platforms as soon TCG stops using signals to interrupt the execution of translated code. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07include/exec/softmmu-semi.h: Add support for 64-bit valuesPeter Maydell1-0/+18
Add support for getting and setting 64-bit values in the softmmu semihosting support functions. This will be needed for 64-bit ARM semihosting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org> Message-id: 1439483745-28752-6-git-send-email-peter.maydell@linaro.org
2015-09-07gdbstub: Implement gdb_do_syscallv()Peter Maydell1-0/+27
Implement a variant of the existing gdb_do_syscall() which takes a va_list. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org> Message-id: 1439483745-28752-4-git-send-email-peter.maydell@linaro.org
generated by cgit v1.1 at 2025-01-14 13:21:55 +0000