| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A closer read of the NBD spec shows that a structured reply chunk
for a hole is not quite identical to the prefix of a data chunk,
because the hole has to also send a 32-bit size field. Although
we do not yet send holes, we should fix the misleading information
in our header and make it easier for a future patch to support
sparse reads. Messed up in commit bae245d1.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-13-eblake@redhat.com>
|
|
An upcoming change to block/nbd-client.c will want to read the
tail of a structured reply chunk directly from the wire. Move
this function to make it easier.
Based on a patch from Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-12-eblake@redhat.com>
|
|
In following patch nbd_receive_reply will be used both for simple
and structured reply header receiving.
NBDReply is altered into union of simple reply header and structured
reply chunk header, simple error translation moved to block/nbd-client
to be consistent with further structured reply error translation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-11-eblake@redhat.com>
|
|
Upcoming patches will implement the NBD structured reply
extension [1] for both client and server roles. Declare the
constants, structs, and lookup routines that will be valuable
whether the server or client code is backported in isolation.
This includes moving one constant from an internal header to
the public header, as part of the structured read processing
will be done in block/nbd-client.c rather than nbd/client.c.
[1]https://github.com/NetworkBlockDevice/nbd/blob/extension-structured-reply/doc/proto.md
Based on patches from Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-4-eblake@redhat.com>
|
|
This is needed in preparation for structured reply handling,
as we will be performing the translation from NBD error to
system errno value higher in the stack at block/nbd-client.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-3-eblake@redhat.com>
|
|
Any device that has request_alignment greater than 512 should be
unable to report status at a finer granularity; it may also be
simpler for such devices to be guaranteed that the block layer
has rounded things out to the granularity boundary (the way the
block layer already rounds all other I/O out). Besides, getting
the code correct for super-sector alignment also benefits us
for the fact that our public interface now has byte granularity,
even though none of our drivers have byte-level callbacks.
Add an assertion in blkdebug that proves that the block layer
never requests status of unaligned sections, similar to what it
does on other requests (while still keeping the generic helper
in place for when future patches add a throttle driver). Note
that iotest 177 already covers this (it would fail if you use
just the blkdebug.c hunk without the io.c changes). Meanwhile,
we can drop assertions in callers that no longer have to pass
in sector-aligned addresses.
There is a mid-function scope added for 'count' and 'longret',
for a couple of reasons: first, an upcoming patch will add an
'if' statement that checks whether a driver has an old- or
new-style callback, and can conveniently use the same scope for
less indentation churn at that time. Second, since we are
trying to get rid of sector-based computations, wrapping things
in a scope makes it easier to group and see what will be
deleted in a final cleanup patch once all drivers have been
converted to the new-style callback.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status_above()
to bdrv_block_status_above() ensures that the compiler enforces that
all callers are updated. Likewise, since it a byte interface allows
an offset mapping that might not be sector aligned, split the mapping
out of the return value and into a pass-by-reference parameter. For
now, the io.c layer still assert()s that all uses are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status in the drivers.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), plus
updates for the new split return interface. But some code,
particularly bdrv_block_status(), gets a lot simpler because it no
longer has to mess with sectors. Likewise, mirror code no longer
computes s->granularity >> BDRV_SECTOR_BITS, and can therefore drop
an assertion about alignment because the loop no longer depends on
alignment (never mind that we don't really have a driver that
reports sub-sector alignments, so it's not really possible to test
the effect of sub-sector mirroring). Fix a neighboring assertion to
use is_power_of_2 while there.
For ease of review, bdrv_get_block_status() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status() to
bdrv_block_status() ensures that the compiler enforces that all
callers are updated. For now, the io.c layer still assert()s that
all callers are sector-aligned, but that can be relaxed when a later
patch implements byte-based block status in the drivers.
There was an inherent limitation in returning the offset via the
return value: we only have room for BDRV_BLOCK_OFFSET_MASK bits, which
means an offset can only be mapped for sector-aligned queries (or,
if we declare that non-aligned input is at the same relative position
modulo 512 of the answer), so the new interface also changes things to
return the offset via output through a parameter by reference rather
than mashed into the return value. We'll have some glue code that
munges between the two styles until we finish converting all uses.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), coupled
with the tweak in calling convention. But some code, particularly
bdrv_is_allocated(), gets a lot simpler because it no longer has to
mess with sectors.
For ease of review, bdrv_get_block_status_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In the process of converting sector-based interfaces to bytes,
I'm finding it easier to represent a byte count as a 64-bit
integer at the block layer (even if we are internally capped
by SIZE_MAX or even INT_MAX for individual transactions, it's
still nicer to not have to worry about truncation/overflow
issues on as many variables). Update the signature of
bdrv_round_to_clusters() to uniformly use int64_t, matching
the signature already chosen for bdrv_is_allocated and the
fact that off_t is also a signed type, then adjust clients
according to the required fallout (even where the result could
now exceed 32 bits, no client is directly assigning the result
into a 32-bit value without breaking things into a loop first).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Not all callers care about which BDS owns the mapping for a given
range of the file. This patch merely simplifies the callers by
consolidating the logic in the common call point, while guaranteeing
a non-NULL file to all the driver callbacks, for no semantic change.
The only caller that does not care about pnum is bdrv_is_allocated,
as invoked by vvfat; we can likewise add assertions that the rest
of the stack does not have to worry about a NULL pnum.
Furthermore, this will also set the stage for a future cleanup: when
a caller does not care about which BDS owns an offset, it would be
nice to allow the driver to optimize things to not have to return
BDRV_BLOCK_OFFSET_VALID in the first place. In the case of fragmented
allocation (for example, it's fairly easy to create a qcow2 image
where consecutive guest addresses are not at consecutive host
addresses), the current contract requires bdrv_get_block_status()
to clamp *pnum to the limit where host addresses are no longer
consecutive, but allowing a NULL file means that *pnum could be
set to the full length of known-allocated data.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
staging
nbd patches for 2017-10-14
- Marc-André Lureau - NBD: use g_new() family of functions
- Vladimir Sementsov-Ogievskiy - first half of 00/13 nbd minimal structured read
# gpg: Signature made Sun 15 Oct 2017 01:38:47 BST
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-10-14:
nbd: header constants indenting
nbd/server: simplify reply transmission
nbd/server: refactor nbd_co_send_simple_reply parameters
nbd/server: do not use NBDReply structure
nbd/server: structurize simple reply header sending
nbd: rename some simple-request related objects to be _simple_
block/nbd-client: refactor nbd_co_receive_reply
block/nbd-client: assert qiov len once in nbd_co_request
NBD: use g_new() family of functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Prepare indenting for the following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
BlockDriverState has a bdrv_co_drain() callback but no equivalent for
the end of the drain. The throttle driver (block/throttle.c) needs a way
to mark the end of the drain in order to toggle io_limits_disabled
correctly, thus bdrv_co_drain_end is needed.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Use packed structure instead of pointer arithmetics.
Also, merge two redundant traces into one.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-5-vsementsov@virtuozzo.com>
[eblake: tweak and mention impact on traces, fix errp usage]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
We don't need to make any assumptions about the graph layout above the
top node of the commit operation any more. Remove the use of
bdrv_find_overlay() and related variables from the commit job code.
bdrv_drop_intermediate() doesn't use the 'active' parameter any more, so
we can just drop it.
The overlay node was previously added to the block job to get a
BLK_PERM_GRAPH_MOD. We really need to respect those permissions in
bdrv_drop_intermediate() now, but as long as we haven't figured out yet
how BLK_PERM_GRAPH_MOD is actually supposed to work, just leave a TODO
comment there.
With this change, it is now possible to perform another block job on an
overlay node without conflicts. qemu-iotests 030 is changed accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
There is no good reason for bdrv_drop_intermediate() to know the active
layer above the subchain it is operating on - even more so, because
the assumption that there is a single active layer above it is not
generally true.
In order to prepare removal of the active parameter, use a BdrvChildRole
callback to update the backing file string in the overlay image instead
of directly calling bdrv_change_backing_file().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Both callers already had bytes available, but were scaling to
sectors. Move the scaling to internal code. In the case of
bdrv_aligned_pwritev(), we are now passing the exact offset
rather than a rounded sector-aligned value, but that's okay
as long as dirty bitmap widens start/bytes to granularity
boundaries.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
All callers to bdrv_dirty_iter_new() passed 0 for their initial
starting point, drop that parameter.
Most callers to bdrv_set_dirty_iter() were scaling a byte offset to
a sector number; the exception qcow2-bitmap will be converted later
to use byte rather than sector iteration. Move the scaling to occur
internally to dirty bitmap code instead, so that callers now pass
in bytes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Right now, the dirty-bitmap code exposes the fact that we use
a scale of sector granularity in the underlying hbitmap to anything
that wants to serialize a dirty bitmap. It's nicer to uniformly
expose bytes as our dirty-bitmap interface, matching the previous
change to bitmap size. The only caller to serialization is currently
qcow2-cluster.c, which becomes a bit more verbose because it is still
tracking sectors for other reasons, but a later patch will fix that
to more uniformly use byte offsets everywhere. Likewise, within
dirty-bitmap, we have to add more assertions that we are not
truncating incorrectly, which can go away once the internal hbitmap
is byte-based rather than sector-based.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We've previously fixed several places where we failed to account
for possible errors from bdrv_nb_sectors(). Fix another one by
making bdrv_dirty_bitmap_truncate() take the new size from the
caller instead of querying itself; then adjust the sole caller
bdrv_truncate() to pass the size just determined by a successful
resize, or to reuse the size given to the original truncate
operation when refresh_total_sectors() was not able to confirm the
actual size (the two sizes can potentially differ according to
rounding constraints), thus avoiding sizing the bitmaps to -1.
This also fixes a bug where not all failure paths in
bdrv_truncate() would set errp.
Note that bdrv_truncate() is still a bit awkward. We may want
to revisit it later and clean up things to better guarantee that
a resize attempt either fails cleanly up front, or cannot fail
after guest-visible changes have been made (if temporary changes
are made, then they need to be cleanly rolled back). But that
is a task for another day; for now, the goal is the bare minimum
fix to ensure that just bdrv_dirty_bitmap_truncate() cannot fail.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We had several functions that no one is currently using, and which
use sector-based interfaces. I'm trying to convert towards byte-based
interfaces, so it's easier to just drop the unused functions:
bdrv_dirty_bitmap_get_meta
bdrv_dirty_bitmap_get_meta_locked
bdrv_dirty_bitmap_reset_meta
bdrv_dirty_bitmap_meta_granularity
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If we switch between read-only and read-write, the permissions that
image format drivers need on bs->file change, too. Make sure to update
the permissions during bdrv_reopen().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
When new permissions are calculated during bdrv_reopen(), they need to
be based on the state of the graph as it will be after the reopen has
completed, not on the current state of the involved nodes.
This patch makes bdrv_is_writable() optionally accept a BlockReopenQueue
from which the new flags are taken. This is then used for determining
the new bs->file permissions of format drivers as soon as we add the
code to actually pass a non-NULL reopen queue to the .bdrv_child_perm
callbacks.
While moving bdrv_is_writable(), make it static. It isn't used outside
block.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Complete the transition by renaming this header, which was
shared by block/iscsi.c and the SCSI emulation code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and
hw/scsi, but the introduction of the persistent reservation helper
will add many more instances of this. There is also include/block/scsi.h,
which actually is not part of the core block layer.
The persistent reservation manager will also need a home. A scsi/
directory provides one for both the aforementioned shared code and
the PR manager code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
staging
nbd patches for 2017-09-06
- Daniel P. Berrange: [0/2] Fix / skip recent iotests with LUKS driver
- Eric Blake: [0/3] nbd: Use common read/write-all qio functions
# gpg: Signature made Wed 06 Sep 2017 16:17:55 BST
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-09-06:
nbd: Use new qio_channel_*_all() functions
io: Add new qio_channel_read{, v}_all_eof functions
io: Yield rather than wait when already in coroutine
iotests: blacklist 194 with the luks driver
iotests: rewrite 192 to use _launch_qemu to fix LUKS support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Rather than open-coding our own read/write-all functions, we
can make use of the recently-added qio code. It slightly
changes the error message in one of the iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
|
|
block/throttle.c uses existing I/O throttle infrastructure inside a
block filter driver. I/O operations are intercepted in the filter's
read/write coroutines, and referred to block/throttle-groups.c
The driver can be used with the syntax
-drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar
which registers the throttle filter node with the ThrottleGroup 'bar'. The
given group must be created beforehand with object-add or -object.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
timer_cb() needs to know about the current Aio context of the throttle
request that is woken up. In order to make ThrottleGroupMember backend
agnostic, this information is stored in an aio_context field instead of
accessing it from BlockBackend.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state. Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future. The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170831105456.9558-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The following functions fail if bs->drv is a filter and does not
implement them:
bdrv_probe_blocksizes
bdrv_probe_geometry
bdrv_truncate
bdrv_has_zero_init
bdrv_get_info
Instead, the call should be passed to bs->file if it exists, to allow
filter drivers to support those methods without implementing them. This
commit makes `drv->is_filter = true` imply that these callbacks will be
forwarded to bs->file by default, so disabling support for these
functions must be done explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Fix nbd_send_request to return int, as it returns a return value
of nbd_write (which is int), and the only user of nbd_send_request's
return value (nbd_co_send_request) consider it as int too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Refactor nbd_receive_reply to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of read
data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-4-vsementsov@virtuozzo.com>
[eblake: tweak function comments]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
BDRV_O_ALLOW_RDWR is a flag that tells whether qemu can internally
reopen a node read-write temporarily because the user requested
read-write for the top-level image, but qemu decided that read-only is
enough for this node (a backing file).
bdrv_reopen() is different, it is also used for cases where the user
changed their mind and wants to update the options. There is no reason
to forbid making a node read-write in that case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
This is not used anymore since c01c214b69 ("block: remove all encryption
handling APIs", 2017-07-11).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
|
|
This will let the callback take a CoMutex in the next patch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The NBD protocol has several constants defined in various extensions
that we are about to implement. Expose them to the code, along with
an easy way to map various constants to strings during diagnostic
messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-4-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
