aboutsummaryrefslogtreecommitdiff
path: root/include/block/block.h
AgeCommit message (Collapse)AuthorFilesLines
2017-05-11block: Update comments on BDRV_BLOCK_* meaningsEric Blake1-16/+19
We had some conflicting documentation: a nice 8-way table that described all possible combinations of DATA, ZERO, and OFFSET_VALID, contrasted with text that implied that OFFSET_VALID always meant raw data could be read directly. Furthermore, the text refers a lot to bs->file, even though the interface was updated back in 67a0fd2a to let the driver pass back a specific BDS (not necessarily bs->file). As the 8-way table is the intended semantics, simplify the rest of the text to get rid of the confusion. ALLOCATED is always set by the block layer for convenience (drivers do not have to worry about it). RAW is used only internally, but by more than the raw driver. Document these additional items on the driver callback. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170507000552.20847-4-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11block: Fix write/resize permissions for inactive imagesKevin Wolf1-0/+1
Format drivers for inactive nodes don't need write/resize permissions on their bs->file and can share write/resize with another VM (in fact, this is the whole point of keeping images inactive). Represent this fact in the op blocker system, so that image locking does the right thing without special-casing inactive images. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-11block: New BdrvChildRole.activate() for blk_resume_after_migration()Kevin Wolf1-2/+0
Instead of manually calling blk_resume_after_migration() in migration code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend activation with cache invalidation into a single function. This is achieved with a new callback in BdrvChildRole that is called by bdrv_invalidate_cache_all(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-11block: Add, parse and store "force-share" optionFam Zheng1-0/+1
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11block: Make bdrv_perm_names publicFam Zheng1-0/+2
It can be used outside of block.c for making user friendly messages. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz1-1/+1
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-24block: introduce bdrv_can_set_read_only()Jeff Cody1-0/+1
Introduce check function for setting read_only flags. Will return < 0 on error, with appropriate Error value set. Does not alter any flags. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@redhat.com
2017-04-24block: do not set BDS read_only if copy_on_read enabledJeff Cody1-1/+1
A few block drivers will set the BDS read_only flag from their .bdrv_open() function. This means the bs->read_only flag could be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ flag check occurs prior to the call to bdrv->bdrv_open(). This adds an error return to bdrv_set_read_only(), and an error will be return if we try to set the BDS to read_only while copy_on_read is enabled. This patch also changes the behavior of vvfat. Before, vvfat could override the drive 'readonly' flag with its own, internal 'rw' flag. For instance, this -drive parameter would result in a writable image: "-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on" This is not correct. Now, attempting to use the above -drive parameter will result in an error (i.e., 'rw' is incompatible with 'readonly=on'). Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
2017-04-24block: add bdrv_set_read_only() helper functionJeff Cody1-0/+1
We have a helper wrapper for checking for the BDS read_only flag, add a helper wrapper to set the read_only flag as well. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
2017-04-24block: Make errp the last parameter of bdrv_img_createFam Zheng1-1/+1
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-6-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-18block: Drain BH in bdrv_drained_beginFam Zheng1-8/+14
During block job completion, nothing is preventing block_job_defer_to_main_loop_bh from being called in a nested aio_poll(), which is a trouble, such as in this code path: qmp_block_commit commit_active_start bdrv_reopen bdrv_reopen_multiple bdrv_reopen_prepare bdrv_flush aio_poll aio_bh_poll aio_bh_call block_job_defer_to_main_loop_bh stream_complete bdrv_reopen block_job_defer_to_main_loop_bh is the last step of the stream job, which should have been "paused" by the bdrv_drained_begin/end in bdrv_reopen_multiple, but it is not done because it's in the form of a main loop BH. Similar to why block jobs should be paused between drained_begin and drained_end, BHs they schedule must be excluded as well. To achieve this, this patch forces draining the BH in BDRV_POLL_WHILE. As a side effect this fixes a hang in block_job_detach_aio_context during system_reset when a block job is ready: #0 0x0000555555aa79f3 in bdrv_drain_recurse #1 0x0000555555aa825d in bdrv_drained_begin #2 0x0000555555aa8449 in bdrv_drain #3 0x0000555555a9c356 in blk_drain #4 0x0000555555aa3cfd in mirror_drain #5 0x0000555555a66e11 in block_job_detach_aio_context #6 0x0000555555a62f4d in bdrv_detach_aio_context #7 0x0000555555a63116 in bdrv_set_aio_context #8 0x0000555555a9d326 in blk_set_aio_context #9 0x00005555557e38da in virtio_blk_data_plane_stop #10 0x00005555559f9d5f in virtio_bus_stop_ioeventfd #11 0x00005555559fa49b in virtio_bus_stop_ioeventfd #12 0x00005555559f6a18 in virtio_pci_stop_ioeventfd #13 0x00005555559f6a18 in virtio_pci_reset #14 0x00005555559139a9 in qdev_reset_one #15 0x0000555555916738 in qbus_walk_children #16 0x0000555555913318 in qdev_walk_children #17 0x0000555555916738 in qbus_walk_children #18 0x00005555559168ca in qemu_devices_reset #19 0x000055555581fcbb in pc_machine_reset #20 0x00005555558a4d96 in qemu_system_reset #21 0x000055555577157a in main_loop_should_exit #22 0x000055555577157a in main_loop #23 0x000055555577157a in main The rationale is that the loop in block_job_detach_aio_context cannot make any progress in pausing/completing the job, because bs->in_flight is 0, so bdrv_drain doesn't process the block_job_defer_to_main_loop BH. With this patch, it does. Reported-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170418143044.12187-3-famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Tested-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-04-11block: Introduce bdrv_coroutine_enterFam Zheng1-0/+5
Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2017-04-11block: Make bdrv_parent_drained_begin/end publicFam Zheng1-0/+16
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2017-04-07block: Ignore guest dev permissions during incoming migrationKevin Wolf1-0/+2
Usually guest devices don't like other writers to the same image, so they use blk_set_perm() to prevent this from happening. In the migration phase before the VM is actually running, though, they don't have a problem with writes to the image. On the other hand, storage migration needs to be able to write to the image in this phase, so the restrictive blk_set_perm() call of qdev devices breaks it. This patch flags all BlockBackends with a qdev device as blk->disable_perm during incoming migration, which means that the requested permissions are stored in the BlockBackend, but not actually applied to its root node yet. Once migration has finished and the VM should be resumed, the permissions are applied. If they cannot be applied (e.g. because the NBD server used for block migration hasn't been shut down), resuming the VM fails. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
2017-03-07block: Fix error handling in bdrv_replace_in_backing_chain()Kevin Wolf1-2/+2
When adding an Error parameter, bdrv_replace_in_backing_chain() would become nothing more than a wrapper around change_parent_backing_link(). So make the latter public, renamed as bdrv_replace_node(), and remove bdrv_replace_in_backing_chain(). Most of the callers just remove a node from the graph that they just inserted, so they can use &error_abort, but completion of a mirror job with 'replaces' set can actually fail. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-02-28block: Add Error parameter to bdrv_append()Kevin Wolf1-1/+2
Aborting on error in bdrv_append() isn't correct. This patch fixes it and lets the callers handle failures. Test case 085 needs a reference output update. This is caused by the reversed order of bdrv_set_backing_hd() and change_parent_backing_link() in bdrv_append(): When the backing file of the new node is set, the parent nodes are still pointing to the old top, so the backing blocker is now initialised with the node name rather than the BlockBackend name. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add Error parameter to bdrv_set_backing_hd()Kevin Wolf1-1/+2
Not all callers of bdrv_set_backing_hd() know for sure that attaching the backing file will be allowed by the permission system. Return the error from the function rather than aborting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add BDRV_O_RESIZE for blk_new_open()Kevin Wolf1-0/+1
blk_new_open() is a convenience function that processes flags rather than QDict options as a simple way to just open an image file. In order to keep it convenient in the future, it must automatically request the necessary permissions. This can easily be inferred from the flags for read and write, but we need another flag that tells us whether to get the resize permission. We can't just always request it because that means that no block jobs can run on the resulting BlockBackend (which is something that e.g. qemu-img commit wants to do), but we also can't request it never because most of the .bdrv_create() implementations call blk_truncate(). The solution is to introduce another flag that is passed by all users that want to resize the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add Error argument to bdrv_attach_child()Kevin Wolf1-1/+2
It will have to return an error soon, so prepare the callers for it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28block: Add op blocker permission constantsKevin Wolf1-0/+36
This patch defines the permission categories that will be used by the new op blocker system. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-24block: Add bdrv_new_open_driver()Kevin Wolf1-0/+2
This function allows to create more or less normal BlockDriverStates even for BlockDrivers that aren't globally registered (e.g. helper filters for block jobs). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-24block: Pass BdrvChild to bdrv_truncate()Kevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-01-27block: Fix target variable of BLKSECTGET ioctlEric Farman1-0/+1
Commit 6f6071745bd0 ("raw-posix: Fetch max sectors for host block device") introduced a routine to call the kernel BLKSECTGET ioctl, which stores the result back to user space. However, the size of the data returned depends on the routine handling the ioctl. The (compat_)blkdev_ioctl returns a short, while sg_ioctl returns an int. Thus, on big-endian systems, we can find ourselves accidentally shifting the result to a much larger value. (On s390x, a short is 16 bits while an int is 32 bits.) Also, the two ioctl handlers return values in different scales (block returns sectors, while sg returns bytes), so some tweaking of the outputs is required such that hdev_get_max_transfer_length returns a value in a consistent set of units. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Message-Id: <20170120162527.66075-3-farman@linux.vnet.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16block: get rid of bdrv_io_unplugged_begin/endPaolo Bonzini1-2/+0
bdrv_io_plug and bdrv_io_unplug are only called (via their BlockBackend equivalents) after starting asynchronous I/O. bdrv_drain is not going to be called while they are running, because---even if a coroutine runs for some reason---it will only drain in the next iteration of the event loop through bdrv_co_yield_to_drain. So this mechanism is unnecessary, get rid of it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129113334.605-1-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-01blockjobs: split interface into public/private, Part 1John Snow1-2/+1
To make it a little more obvious which functions are intended to be public interface and which are intended to be for use only by jobs themselves, split the interface into "public" and "private" files. Convert blockjobs (e.g. block/backup) to using the private interface. Leave blockdev and others on the public interface. There are remaining uses of private state by qemu-img, and several cases in blockdev.c and block/io.c where we grab job->blk for the purposes of acquiring an AIOContext. These will be corrected in future patches. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-7-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-10-31block: Add bdrv_drain_all_{begin,end}()Alberto Garcia1-0/+2
bdrv_drain_all() doesn't allow the caller to do anything after all pending requests have been completed but before block jobs are resumed. This patch splits bdrv_drain_all() into _begin() and _end() for that purpose. It also adds aio_{disable,enable}_external() calls to disable external clients in the meantime. An important restriction of this split is that no new block jobs or BlockDriverStates can be created between the bdrv_drain_all_begin() and bdrv_drain_all_end() calls. This is not a concern now because we'll only be using this in bdrv_reopen_multiple(), but it must be dealt with if we ever have other uses cases in the future. Signed-off-by: Alberto Garcia <berto@igalia.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-28block: only call aio_poll on the current thread's AioContextPaolo Bonzini1-3/+23
aio_poll is not thread safe; for example bdrv_drain can hang if the last in-flight I/O operation is completed in the I/O thread after the main thread has checked bs->in_flight. The bug remains latent as long as all of it is called within aio_context_acquire/aio_context_release, but this will change soon. To fix this, if bdrv_drain is called from outside the I/O thread, signal the main AioContext through a dummy bottom half. The event loop then only runs in the I/O thread. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28block: prepare bdrv_reopen_multiple to release AioContextPaolo Bonzini1-1/+1
After the next patch bdrv_drain_all will have to be called without holding any AioContext. Prepare to do this by adding an AioContext argument to bdrv_reopen_multiple. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28block: introduce BDRV_POLL_WHILEPaolo Bonzini1-0/+9
We want the BDS event loop to run exclusively in the iothread that owns the BDS's AioContext. This macro will provide the synchronization between the two event loops; for now it just wraps the common idiom of a while loop around aio_poll. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1477565348-5458-8-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-27block: Remove bdrv_aio_ioctl()Kevin Wolf1-3/+0
It is unused now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-10-27block: Remove bdrv_ioctl()Kevin Wolf1-1/+0
It is unused now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-10-27block: Use blk_co_ioctl() for all BB level ioctlsKevin Wolf1-0/+1
All read/write functions already have a single coroutine-based function on the BlockBackend level through which all requests go (no matter what API style the external caller used) and which passes the requests down to the block node level. This patch exports a bdrv_co_ioctl() function and uses it to extend this mode of operation to ioctls. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-10-27block: Remove bdrv_aio_pdiscard()Kevin Wolf1-3/+0
It is unused now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-29block: Move 'discard' option to bdrv_open_common()Kevin Wolf1-0/+1
This enables its use for nested child nodes. The compatibility between the 'discard' and 'detect-zeroes' setting is checked in bdrv_open_common() now as the former setting isn't available before calling bdrv_open() any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-29block: reintroduce bdrv_flush_allJohn Snow1-0/+1
Commit fe1a9cbc moved the flush_all routine from the bdrv layer to the block-backend layer. In doing so, however, the semantics of the routine changed slightly such that flush_all now used blk_flush instead of bdrv_flush. blk_flush can fail if the attached device model reports that it is not "available," (i.e. the tray is open.) This changed the semantics of flush_all such that it can now fail for e.g. open CDROM drives. Reintroduce bdrv_flush_all to regain the old semantics without having to alter the behavior of blk_flush or blk_flush_all, which are already 'doing the right thing.' Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Add "read-only" to the options QDictAlberto Garcia1-0/+1
This adds the "read-only" option to the QDict. One important effect of this change is that when a child inherits options from its parent, the existing "read-only" mode can be preserved if it was explicitly set previously. This addresses scenarios like this: [E] <- [D] <- [C] <- [B] <- [A] In this case, if we reopen [D] with read-only=off, and later reopen [B], then [D] will not inherit read-only=on from its parent during the bdrv_reopen_queue_child() stage. The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the value of the "read-only" option. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23block: Remove bdrv_is_snapshotAlberto Garcia1-1/+0
This is unnecessary and has been unused since 5433c24f0f9306c82ad9bcc. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-15Remove unused function declarationsLadi Prosek1-6/+0
Unused function declarations were found using a simple gcc plugin and manually verified by grepping the sources. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-05block: remove BlockDriver.bdrv_write_compressedPavel Butsykin1-2/+0
There are no block drivers left that implement the old .bdrv_write_compressed interface, so it can be removed. Also now we have no need to use the bdrv_pwrite_compressed function and we can remove it entirely. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block/io: reuse bdrv_co_pwritev() for write compressedPavel Butsykin1-1/+2
For bdrv_pwrite_compressed() it looks like most of the code creating coroutine is duplicated in bdrv_prwv_co(). So we can just add a flag (BDRV_REQ_WRITE_COMPRESSED) and use bdrv_prwv_co() as a generic one. In the end we get coroutine oriented function for write compressed by using bdrv_co_pwritev/blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED flag. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: Convert bdrv_pwrite_compressed() to BdrvChildPavel Butsykin1-1/+1
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: switch blk_write_compressed() to byte-based interfacePavel Butsykin1-2/+2
This is a preparatory patch, which continues the general trend of the transition to the byte-based interfaces. bdrv_check_request() and blk_check_request() are no longer used, thus we can remove them. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-20block: Convert bdrv_aio_discard() to byte-basedEric Blake1-3/+3
Another step towards byte-based interfaces everywhere. Replace the sector-based bdrv_aio_discard() with a new byte-based bdrv_aio_pdiscard(), which silently ignores any unaligned head or tail. Driver callbacks will be converted in followup patches. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1468624988-423-5-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert bdrv_discard() to byte-basedEric Blake1-1/+1
Another step towards byte-based interfaces everywhere. Replace the sector-based bdrv_discard() with a new byte-based bdrv_pdiscard(), which silently ignores any unaligned head or tail. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-3-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20block: Convert bdrv_co_discard() to byte-basedEric Blake1-1/+1
Another step towards byte-based interfaces everywhere. Replace the sector-based bdrv_co_discard() with a new byte-based bdrv_co_pdiscard(), which silently ignores any unaligned head or tail. Driver callbacks will be converted in followup patches. By calculating the alignment outside of the loop, and clamping the max discard to an aligned value, we can simplify the actions done within the loop. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-2-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_co_preadv/pwritev to BdrvChildKevin Wolf1-2/+2
This is the final patch for converting the common I/O path to take a BdrvChild parameter instead of BlockDriverState. The completion of this conversion means that all users that perform I/O on an image need to actually hold a reference (in the form of BdrvChild, possible as part of a BlockBackend) to that image. This also protects against inconsistent use of BlockBackend vs. BlockDriverState functions because direct use of a BlockDriverState isn't possible any more and blk->root is private for block-backends.c. In addition, we can now distinguish different users in the I/O path, and the future op blockers work is going to add assertions based on permissions stored in BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pwrite_zeroes() to BdrvChildKevin Wolf1-2/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pwrite(v/_sync) to BdrvChildKevin Wolf1-5/+4
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pread(v) to BdrvChildKevin Wolf1-3/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_write() to BdrvChildKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2025-01-28 20:35:22 +0000