aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2010-12-20sparc32: ledma extra registers need tracing tooBob Breuer1-3/+8
Also trace the extra registers, and update the comments with new info from Artyom Tarasenko. Signed-off-by: Bob Breuer <breuerr@mc.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-20wdt_ib700: Fix accidental use of SoftFloat int64 typeAndreas Färber1-1/+1
softfloat.h's int64 type has least-width semantics. Since we're assigning an int64_t, use plain int64_t. v4: * Summary change. v3: * Split off. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Acked-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-20apic: Fix accidental use of SoftFloat uint32 typeAndreas Färber1-1/+1
softfloat.h's uint32 type has least-width semantics. Surrounding code uses uint32_t, so use uint32_t here, too. v4: * Summary change. v3: * Split off. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-19ahci: delete write-only variables (v2)Blue Swirl1-4/+1
Avoid these warnings with GCC 4.6.0: /src/qemu/hw/ide/ahci.c: In function 'ahci_reset_port': /src/qemu/hw/ide/ahci.c:810:14: error: variable 'tfd' set but not used [-Werror=unused-but-set-variable] /src/qemu/hw/ide/ahci.c: In function 'handle_cmd': /src/qemu/hw/ide/ahci.c:1103:19: error: variable 'pr' set but not used [-Werror=unused-but-set-variable] In the tfd variable case, fix the logic also. CC: Alexander Graf <agraf@suse.de> CC: Kevin Wolf <kwolf@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-19vga: Declare as little endianBlue Swirl1-25/+1
This patch replaces explicit bswaps with endianness hints to the mmio layer. CC: Alexander Graf <agraf@suse.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-18sparc32: ledma extra registersBob Breuer2-8/+23
ledma has 0x20 bytes of registers according to OBP, and at least Solaris9 reads the 5th register which is beyond what we've mapped. So let's setup a flag (inspired by a previous patch from Blue Swirl) to identify ledma from espdma, and map another 16 bytes of registers which return 0. Signed-off-by: Bob Breuer <breuerr@mc.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17ide: Build fix for via.cKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Fix build for cmd646.cKevin Wolf1-2/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Andreas Färber <andreas.faerber@web.de>
2010-12-17scsi-disk: support WRITE SAME (16) with unmap bitChristoph Hellwig2-2/+52
Support discards via the WRITE SAME command with the unmap bit set, and tell the initiator about the support for it via the block limit and the new thin provisioning EVPD pages. Also fix the comment which incorrectly describedthe block limits EVPD page. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Register vm change state handler once onlyStefan Hajnoczi3-28/+58
We register the vm change state handler in a PCI BAR map() function. This function can be called multiple times throughout the lifetime of a PCI IDE device. This results in duplicate vm change state handlers being register, none of which are ever unregistered. Instead, register the vm change state handler in the device's init function once and for all. piix tested, cmd646 and via not tested. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Remove NULL checks for bdrv_new return valueKevin Wolf1-11/+6
It's an indirect call to qemu_malloc, which never returns an error. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: honor ncq for atapiAlexander Graf1-0/+6
ATAPI also can do ncq, so let's expose the capability. This patch makes CD-ROM support work on Windows 7 for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ahci: set SATA Mode SelectSebastian Herbszt1-0/+3
Set SATA Mode Select to AHCI in the Address Map Register. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ahci: add ahci emulationAlexander Graf1-0/+1524
This patch adds an emulation layer for an ICH-9 AHCI controller. For now this controller does not do IDE legacy emulation. It is a pure AHCI controller. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17pci: add ich9 pci idAlexander Graf1-0/+1
We need a PCI ID for our new AHCI adapter. I just picked an ICH-9 because that's the one in the Q35 chipset. This patch adds a PCI ID define for an ICH-9 AHCI adapter. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17pci: add storage class for sataAlexander Graf1-0/+1
This patch adds the storage sata class id. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: add ncq identify data for ahci sata drivesRoland Elek2-0/+9
I modified ide_identify() to include the zero-based queue length value in word 75, and set bit 8 in word 76 to signal NCQ support in the identify data for AHCI SATA drives. Signed-off-by: Roland Elek <elek.roland@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: move transfer_start after variable modificationAlexander Graf1-4/+4
We hook into transfer_start and immediately call the end function for ahci. This means that everything needs to be in place for the end function when we start the transfer, so let's move the function down to where all state is in place. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Split out BMDMA code from ATA coreAlexander Graf7-298/+446
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen that a bit, so we can happily replace the DMA backend with different implementations. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: fix whitespace gap in ide_exec_cmdAlexander Graf1-367/+367
Now that we have the function split out, we have to reindent it. In order to increase the readability of the actual functional change, this is split out. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: split ide command interpretation offAlexander Graf2-6/+16
The ATA command interpretation code can be used for PATA and SATA interfaces alike. So let's split it out into a separate function. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Merge remote branch 'jvrao/for-anthony' into stagingAnthony Liguori5-12/+20
2010-12-17Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori6-100/+139
2010-12-12Watchdog: disable watchdog timer when hard-rebooting a guest.Richard W.M. Jones2-5/+20
This commit causes the watchdog timer to be reset when a guest is hard-rebooted. The failure case previously was as follows: (a) guest boots, watchdog is enabled (b) guest does a reset eg: echo 'b' > /proc/sysrq-trigger (note that an ordinary /sbin/reboot wouldn't hit this case since as the watchdog daemon is shut down, the daemon would properly disable the watchdog device) (c) the reboot takes longer than the remaining time on the watchdog (d) the watchdog therefore fires during the reboot (e) probably the VM would just reboot again at this point which is pretty benign, but it could depend on the action that the user had selected for the watchdog Now we use the qdev reset function to register a reset handler which disables the timer. Note the handler is called _either_ just after init _or_ when the guest reboots. In the i6300esb case there is a small refactoring of the code so that the device's internal state is now fully restored to defaults on a reboot. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Pass boot device list to firmware.Gleb Natapov1-0/+14
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex for option roms.Gleb Natapov9-21/+29
Extend -option-rom command to have additional parameter ,bootindex=. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Change fw_cfg_add_file() to get full file path as a parameter.Gleb Natapov3-16/+20
Change fw_cfg_add_file() to get full file path as a parameter instead of building one internally. Two reasons for that. First caller may need to know how file is named. Second this moves policy of file naming out from fw_cfg. Platform may want to use more then two levels of directories for instance. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov13-0/+71
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback to scsi bus.Gleb Natapov1-0/+23
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback for usb bus.Gleb Natapov1-0/+42
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Record which USBDevice USBPort belongs too.Gleb Natapov6-6/+8
Ports on root hub will have NULL here. This is needed to reconstruct path from device to its root hub to build device path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback for pci bus.Gleb Natapov1-23/+85
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback for system bus.Gleb Natapov3-0/+36
Prints out mmio or pio used to access child device. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback to IDE bus.Gleb Natapov1-0/+13
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Store IDE bus id in IDEBus structure for easy access.Gleb Natapov6-9/+11
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback to ISA bus in qdev.Gleb Natapov1-0/+16
Use device ioports to create unique device path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Keep track of ISA ports ISA device is using in qdev.Gleb Natapov13-0/+57
Store all io ports used by device in ISADevice structure. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Introduce new BusInfo callback get_fw_dev_path.Gleb Natapov1-0/+7
New get_fw_dev_path callback will be used for build device path usable by firmware in contrast to qdev qemu internal device path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Introduce fw_name field to DeviceInfo structure.Gleb Natapov11-0/+16
Add "fw_name" to DeviceInfo to use in device path building. In contrast to "name" "fw_name" should refer to functionality device provides instead of particular device model like "name" does. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11wdt_i6300esb: register a reset functionBernhard Kohl1-18/+21
The device shall set its default hardware state after each reset. This includes that the timer is stopped which is especially important if the guest does a reboot independantly of a watchdog bite. I moved the initialization of the state variables completely from the init to the reset function which is called right after init during the first boot and afterwards during each reboot. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11isa-bus.c: use hw_error instead of fprintfTristan Gingold1-7/+4
Minor clean-up in isa-bus.c. Using hw_error is more consistent. There is a difference however: hw_error dumps the cpu state. Signed-off-by: Tristan Gingold <gingold@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11usb_ohci: Always use little endianAlexander Graf1-8/+1
This patch replaces explicit bswaps with endianness hints to the mmio layer. Because we don't depend on the target endianness anymore, we can also move the driver over to Makefile.objs. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11isa_mmio: Always use little endianAlexander Graf14-119/+36
This patch converts the ISA MMIO bridge code to always use little endian mmio. All bswap code that existed was only there to convert from native cpu endianness to little endian ISA devices. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11heathrow_pic: Declare as little endianAlexander Graf1-3/+1
This patch replaces explicit bswaps with endianness hints to the mmio layer. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11rtl8139: Declare as little endianAlexander Graf1-13/+1
This patch replaces explicit bswaps with endianness hints to the mmio layer. Because we don't depend on the target endianness anymore, we can also move the driver over to Makefile.objs. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11openpic: Replace explicit byte swap with endian hintsAlexander Graf1-21/+2
This patch replaces explicit bswaps with endianness hints to the mmio layer. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11ppc4xx_pci: Declare as little endianAlexander Graf1-15/+2
This patch replaces explicit bswaps with endianness hints to the mmio layer. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11versatile_pci: Declare as little endianAlexander Graf1-13/+1
This patch replaces explicit bswaps with endianness hints to the mmio layer. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11prep: Declare as little endianAlexander Graf1-35/+3
This patch replaces explicit bswaps with endianness hints to the mmio layer. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11e1000: Make little endianAlexander Graf1-9/+2
The e1000 has compatibility code to handle big endianness which makes it mandatory to be recompiled on different targets. With the generic mmio endianness solution, there's no need for that anymore. We just declare all mmio to be little endian and call it a day. Because we don't depend on the target endianness anymore, we can also move the driver over to Makefile.objs. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-09-26 21:34:33 +0000