aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2020-01-06hda-codec: fix playback rate controlVolker Rümelin1-2/+2
Since commit 1930616b98 "audio: make mixeng optional" the function hda_audio_output_cb can no longer assume the function parameter avail contains the free buffer size. With the playback mixing-engine turned off this leads to a broken playback rate control and playback buffer drops in regular intervals. This patch moves down the rate calculation, so the correct buffer fill level is used for the calculation. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200104091122.13971-1-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-05hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35Denis Plotnikov2-2/+0
5.0 machine type uses 4.2 compats. This seems to be incorrect, since the latests machine type by now is 5.0 and it should use its own compat or shouldn't use any relying on the defaults. Seems, like this appeared because of some problems on merge/rebase. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20191223072856.5369-1-dplotnikov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05vhost-user-scsi: reset the device if supportedRaphael Norwitz1-0/+24
If the vhost-user-scsi backend supports the VHOST_USER_F_RESET_DEVICE protocol feature, then the device can be reset when requested. If this feature is not supported, do not try a reset as this will send a VHOST_USER_RESET_OWNER that the backend is not expecting, potentially putting into an inoperable state. Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1572385083-5254-3-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05vhost-user: add VHOST_USER_RESET_DEVICE to reset devicesRaphael Norwitz1-1/+7
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user backend. Disabling all rings, and resetting all internal state, ready for the backend to be reinitialized. A backend has to report it supports this features with the VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does so, the new message is used instead of sending a RESET_OWNER which has had inconsistent implementations. Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argumentPhilippe Mathieu-Daudé1-2/+2
Both functions are called by MemoryRegionOps.[read/write] handlers with unsigned 'size' argument. Both functions call pci_host_config_[read/write]_common() which expect a uint32_t 'len' parameter (also unsigned). Since it is pointless (and confuse) to use a signed value, use a unsigned type. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216002134.18279-3-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hw/pci/pci_host: Remove redundant PCI_DPRINTF()Philippe Mathieu-Daudé1-16/+5
In commit 3bf4dfdd111 we introduced the pci_cfg_[read/write] trace events in pci_host_config_[read/write]_common(). We have the following call trace: pci_host_data_[read/write]() - PCI_DPRINTF() - pci_data_[read/write]() - PCI_DPRINTF() - pci_host_config_[read/write]_common() trace_pci_cfg_[read/write]() Since the PCI_DPRINTF() calls are redundant with the trace events, remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216002134.18279-2-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-mmio: Clear v2 transport state on soft resetJean-Philippe Brucker1-0/+14
At the moment when the guest writes a status of 0, we only reset the virtio core state but not the virtio-mmio state. The virtio-mmio specification says (v1.1 cs01, 4.2.2.1 Device Requirements: MMIO Device Register Layout): Upon reset, the device MUST clear all bits in InterruptStatus and ready bits in the QueueReady register for all queues in the device. The core already takes care of InterruptStatus by clearing isr, but we still need to clear QueueReady. It would be tempting to clean all registers, but since the specification doesn't say anything more, guests could rely on the registers keeping their state across reset. Linux for example, relies on this for GuestPageSize in the legacy MMIO tranport. Fixes: 44e687a4d9ab ("virtio-mmio: implement modern (v2) personality (virtio-1)") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-Id: <20191213095410.1516119-1-jean-philippe@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hmat acpi: Build Memory Side Cache Information Structure(s)Liu Jingqi1-1/+68
This structure describes memory side cache information for memory proximity domains if the memory side cache is present and the physical device forms the memory side cache. The software could use this information to effectively place the data in memory to maximize the performance of the system memory that use the memory side cache. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-7-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)Liu Jingqi1-1/+103
This structure describes the memory access latency and bandwidth information from various memory access initiator proximity domains. The latency and bandwidth numbers represented in this structure correspond to rated latency and bandwidth for the platform. The software could use this information as hint for optimization. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-6-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hmat acpi: Build Memory Proximity Domain Attributes Structure(s)Liu Jingqi5-2/+152
HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table (HMAT). The specification references below link: http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf It describes the memory attributes, such as memory side cache attributes and bandwidth and latency details, related to the Memory Proximity Domain. The software is expected to use this information as hint for optimization. This structure describes Memory Proximity Domain Attributes by memory subsystem and its associativity with processor proximity domain as well as hint for memory usage. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-5-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05numa: Extend CLI to provide memory side cache informationLiu Jingqi1-0/+80
Add -numa hmat-cache option to provide Memory Side Cache Information. These memory attributes help to build Memory Side Cache Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-cache option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-4-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide memory latency and bandwidth informationLiu Jingqi1-0/+194
Add -numa hmat-lb option to provide System Locality Latency and Bandwidth Information. These memory attributes help to build System Locality Latency and Bandwidth Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-lb option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-3-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide initiator information for numa nodesTao Xu2-0/+87
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT), The initiator represents processor which access to memory. And in 5.2.27.3 Memory Proximity Domain Attributes Structure, the attached initiator is defined as where the memory controller responsible for a memory proximity domain. With attached initiator information, the topology of heterogeneous memory can be described. Add new machine property 'hmat' to enable all HMAT specific options. Extend CLI of "-numa node" option to indicate the initiator numa node-id. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Before using initiator option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-2-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio: don't enable notifications during pollingStefan Hajnoczi3-10/+20
Virtqueue notifications are not necessary during polling, so we disable them. This allows the guest driver to avoid MMIO vmexits. Unfortunately the virtio-blk and virtio-scsi handler functions re-enable notifications, defeating this optimization. Fix virtio-blk and virtio-scsi emulation so they leave notifications disabled. The key thing to remember for correctness is that polling always checks one last time after ending its loop, therefore it's safe to lose the race when re-enabling notifications at the end of polling. There is a measurable performance improvement of 5-10% with the null-co block driver. Real-life storage configurations will see a smaller improvement because the MMIO vmexit overhead contributes less to latency. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20191209210957.65087-1-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-pci: disable vring processing when bus-mastering is disabledMichael Roth3-11/+37
Currently the SLOF firmware for pseries guests will disable/re-enable a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND register after the initial probe/feature negotiation, as it tends to work with a single device at a time at various stages like probing and running block/network bootloaders without doing a full reset in-between. In QEMU, when PCI_COMMAND_MASTER is disabled we disable the corresponding IOMMU memory region, so DMA accesses (including to vring fields like idx/flags) will no longer undergo the necessary translation. Normally we wouldn't expect this to happen since it would be misbehavior on the driver side to continue driving DMA requests. However, in the case of pseries, with iommu_platform=on, we trigger the following sequence when tearing down the virtio-blk dataplane ioeventfd in response to the guest unsetting PCI_COMMAND_MASTER: #2 0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757 #3 0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950 #4 0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0) at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255 #5 0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776 #6 0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550 #7 0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546 #8 0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8) at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527 #9 0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8) at /home/mdroth/w/qemu.git/util/aio-posix.c:520 #10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0) at /home/mdroth/w/qemu.git/util/aio-posix.c:607 #11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true) at /home/mdroth/w/qemu.git/util/aio-posix.c:639 #12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0) at /home/mdroth/w/qemu.git/util/aio-wait.c:71 #13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>) at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288 #14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38) at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245 #15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38) at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237 #16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40) at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292 #17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>) at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613 I.e. the calling code is only scheduling a one-shot BH for virtio_blk_data_plane_stop_bh, but somehow we end up trying to process an additional virtqueue entry before we get there. This is likely due to the following check in virtio_queue_host_notifier_aio_poll: static bool virtio_queue_host_notifier_aio_poll(void *opaque) { EventNotifier *n = opaque; VirtQueue *vq = container_of(n, VirtQueue, host_notifier); bool progress; if (!vq->vring.desc || virtio_queue_empty(vq)) { return false; } progress = virtio_queue_notify_aio_vq(vq); namely the call to virtio_queue_empty(). In this case, since no new requests have actually been issued, shadow_avail_idx == last_avail_idx, so we actually try to access the vring via vring_avail_idx() to get the latest non-shadowed idx: int virtio_queue_empty(VirtQueue *vq) { bool empty; ... if (vq->shadow_avail_idx != vq->last_avail_idx) { return 0; } rcu_read_lock(); empty = vring_avail_idx(vq) == vq->last_avail_idx; rcu_read_unlock(); return empty; but since the IOMMU region has been disabled we get a bogus value (0 usually), which causes virtio_queue_empty() to falsely report that there are entries to be processed, which causes errors such as: "virtio: zero sized buffers are not allowed" or "virtio-blk missing headers" and puts the device in an error state. This patch works around the issue by introducing virtio_set_disabled(), which sets a 'disabled' flag to bypass checks like virtio_queue_empty() when bus-mastering is disabled. Since we'd check this flag at all the same sites as vdev->broken, we replace those checks with an inline function which checks for either vdev->broken or vdev->disabled. The 'disabled' flag is only migrated when set, which should be fairly rare, but to maintain migration compatibility we disable it's use for older machine types. Users requiring the use of the flag in conjunction with older machine types can set it explicitly as a virtio-device option. NOTES: - This leaves some other oddities in play, like the fact that DRIVER_OK also gets unset in response to bus-mastering being disabled, but not restored (however the device seems to continue working) - Similarly, we disable the host notifier via virtio_bus_stop_ioeventfd(), which seems to move the handling out of virtio-blk dataplane and back into the main IO thread, and it ends up staying there till a reset (but otherwise continues working normally) Cc: David Gibson <david@gibson.dropbear.id.au>, Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio: update queue size on guest writeMichael S. Tsirkin1-0/+2
Some guests read back queue size after writing it. Update the size immediatly upon write otherwise they get confused. In particular this is the case for seabios. Reported-by: Roman Kagan <rkagan@virtuozzo.com> Suggested-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05intel_iommu: fix bug to read DMAR_RTADDR_REGYi Sun1-4/+3
Should directly read DMAR_RTADDR_REG but not using 's->root'. Because 's->root' is modified in 'vtd_root_table_setup()' so that the first 12 bits are omitted. This causes the guest iommu debugfs cannot show pasid tables. Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Message-Id: <20191205095439.29114-1-yi.y.sun@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-input: convert to new virtio_delete_queueMichael S. Tsirkin1-2/+3
Seems cleaner than using VQ index values. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-serial-bus: fix memory leak while attach virtio-serial-busPan Nengyuan1-0/+8
ivqs/ovqs/c_ivq/c_ovq is forgot to cleanup in virtio_serial_device_unrealize, the memory leak stack is as bellow: Direct leak of 1290240 byte(s) in 180 object(s) allocated from: #0 0x7fc9bfc27560 in calloc (/usr/lib64/libasan.so.3+0xc7560) #1 0x7fc9bed6f015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015) #2 0x5650e02b83e7 in virtio_add_queue hw/virtio/virtio.c:2327 #3 0x5650e02847b5 in virtio_serial_device_realize hw/char/virtio-serial-bus.c:1089 #4 0x5650e02b56a7 in virtio_device_realize hw/virtio/virtio.c:3504 #5 0x5650e03bf031 in device_set_realized hw/core/qdev.c:876 #6 0x5650e0531efd in property_set_bool qom/object.c:2080 #7 0x5650e053650e in object_property_set_qobject qom/qom-qobject.c:26 #8 0x5650e0533e14 in object_property_set_bool qom/object.c:1338 #9 0x5650e04c0e37 in virtio_pci_realize hw/virtio/virtio-pci.c:1801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Cc: Laurent Vivier <lvivier@redhat.com> Cc: Amit Shah <amit@kernel.org> Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1575444716-17632-3-git-send-email-pannengyuan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-balloon: fix memory leak while attach virtio-balloon devicePan Nengyuan1-0/+7
ivq/dvq/svq/free_page_vq is forgot to cleanup in virtio_balloon_device_unrealize, the memory leak stack is as follow: Direct leak of 14336 byte(s) in 2 object(s) allocated from: #0 0x7f99fd9d8560 in calloc (/usr/lib64/libasan.so.3+0xc7560) #1 0x7f99fcb20015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015) #2 0x557d90638437 in virtio_add_queue hw/virtio/virtio.c:2327 #3 0x557d9064401d in virtio_balloon_device_realize hw/virtio/virtio-balloon.c:793 #4 0x557d906356f7 in virtio_device_realize hw/virtio/virtio.c:3504 #5 0x557d9073f081 in device_set_realized hw/core/qdev.c:876 #6 0x557d908b1f4d in property_set_bool qom/object.c:2080 #7 0x557d908b655e in object_property_set_qobject qom/qom-qobject.c:26 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <1575444716-17632-2-git-send-email-pannengyuan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-01-05virtio: make virtio_delete_queue idempotentMichael S. Tsirkin1-0/+1
Let's make sure calling this twice is harmless - no known instances, but seems safer. Suggested-by: Pan Nengyuan <pannengyuan@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio: add ability to delete vq through a pointerMichael S. Tsirkin1-5/+10
Devices tend to maintain vq pointers, allow deleting them trough a vq pointer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-01-03Merge remote-tracking branch ↵Peter Maydell3-10/+27
'remotes/pmaydell/tags/pull-target-arm-20191220' into staging target-arm queue: * Support emulating the generic timers at frequencies other than 62.5MHz * Various fixes for SMMUv3 emulation bugs * Improve assert error message for hflags mismatches * arm-powerctl: rebuild hflags after setting CP15 bits in arm_set_cpu_on() # gpg: Signature made Fri 20 Dec 2019 14:25:51 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20191220: arm/arm-powerctl: rebuild hflags after setting CP15 bits in arm_set_cpu_on() target/arm: Display helpful message when hflags mismatch hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word position hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro hw/arm/smmuv3: Align stream table base address to table size hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZE hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK value hw/arm/smmuv3: Apply address mask to linear strtab base address ast2600: Configure CNTFRQ at 1125MHz target/arm: Prepare generic timer for per-platform CNTFRQ target/arm: Abstract the generic timer frequency target/arm: Remove redundant scaling of nexttick Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-03Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-1/+1
staging Pull request # gpg: Signature made Fri 20 Dec 2019 10:25:11 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: virtio-blk: fix out-of-bounds access to bitmap in notify_guest_bh docs: fix rst syntax errors in unbuilt docs virtio-blk: deprecate SCSI passthrough Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-03Merge remote-tracking branch 'remotes/kraxel/tags/vga-20191220-pull-request' ↵Peter Maydell1-0/+2
into staging vga: two little bugfixes. # gpg: Signature made Fri 20 Dec 2019 06:06:04 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20191220-pull-request: display/bochs-display: fix memory leak vhost-user-gpu: Drop trailing json comma Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-02console: add graphic_hw_update_done()Marc-André Lureau2-2/+8
Add a function to be called when a graphic update is done. Declare the QXL renderer as async: render_update_cookie_num counts the number of outstanding updates, and graphic_hw_update_done() is called when it reaches none. (note: this is preliminary work for asynchronous screendump support) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-20hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word positionSimon Veith1-1/+1
The smmuv3_record_event() function that generates the F_STE_FETCH error uses the EVT_SET_ADDR macro to record the fetch address, placing it in 32-bit words 4 and 5. The correct position for this address is in words 6 and 7, per the SMMUv3 Architecture Specification. Update the function to use the EVT_SET_ADDR2 macro instead, which is the macro intended for writing to these words. ref. ARM IHI 0070C, section 7.3.4. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-7-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macroSimon Veith1-2/+2
The bit offsets in the EVT_SET_ADDR2 macro do not match those specified in the ARM SMMUv3 Architecture Specification. In all events that use this macro, e.g. F_WALK_EABT, the faulting fetch address or IPA actually occupies the 32-bit words 6 and 7 in the event record contiguously, with the upper and lower unused bits clear due to alignment or maximum supported address bits. How many bits are clear depends on the individual event type. Update the macro to write to the correct words in the event record so that guest drivers can obtain accurate address information on events. ref. ARM IHI 0070C, sections 7.3.12 through 7.3.16. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-6-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Align stream table base address to table sizeSimon Veith1-4/+14
Per the specification, and as observed in hardware, the SMMUv3 aligns the SMMU_STRTAB_BASE address to the size of the table by masking out the respective least significant bits in the ADDR field. Apply this masking logic to our smmu_find_ste() lookup function per the specification. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-5-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZESimon Veith1-2/+6
When checking whether a stream ID is in range of the stream table, we have so far been only checking it against our implementation limit (SMMU_IDR1_SIDSIZE). However, the guest can program the STRTAB_BASE_CFG.LOG2SIZE field to a size that is smaller than this limit. Check the stream ID against this limit as well to match the hardware behavior of raising C_BAD_STREAMID events in case the limit is exceeded. Also, ensure that we do not go one entry beyond the end of the table by checking that its index is strictly smaller than the table size. ref. ARM IHI 0070C, section 6.3.24. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-4-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK valueSimon Veith1-1/+1
There are two issues with the current value of SMMU_BASE_ADDR_MASK: - At the lower end, we are clearing bits [4:0]. Per the SMMUv3 spec, we should also be treating bit 5 as zero in the base address. - At the upper end, we are clearing bits [63:48]. Per the SMMUv3 spec, only bits [63:52] must be explicitly treated as zero. Update the SMMU_BASE_ADDR_MASK value to mask out bits [63:52] and [5:0]. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-3-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Apply address mask to linear strtab base addressSimon Veith1-1/+1
In the SMMU_STRTAB_BASE register, the stream table base address only occupies bits [51:6]. Other bits, such as RA (bit [62]), must be masked out to obtain the base address. The branch for 2-level stream tables correctly applies this mask by way of SMMU_BASE_ADDR_MASK, but the one for linear stream tables does not. Apply the missing mask in that case as well so that the correct stream base address is used by guests which configure a linear stream table. Linux guests are unaffected by this change because they choose a 2-level stream table layout for the QEMU SMMUv3, based on the size of its stream ID space. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-2-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20ast2600: Configure CNTFRQ at 1125MHzAndrew Jeffery1-0/+3
This matches the configuration set by u-boot on the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 080ca1267a09381c43cf3c50d434fb6c186f2b6e.1576215453.git-series.andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20Merge remote-tracking branch ↵Peter Maydell1-2/+2
'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging Various testing and logging updates - test tci with Travis - enable multiarch testing in Travis - default to out-of-tree builds - make changing logfile safe via RCU - remove redundant tests - remove gtester test from docker - convert DEBUG_MMAP to tracepoints - remove hand rolled glob function - trigger tcg re-configure when needed # gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits) tests/tcg: ensure we re-configure if configure.sh is updated trace: replace hand-crafted pattern_glob with g_pattern_match_simple linux-user: convert target_munmap debug to a tracepoint linux-user: log page table changes under -d page linux-user: add target_mmap_complete tracepoint linux-user: convert target_mmap debug to tracepoint linux-user: convert target_mprotect debug to tracepoint travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry docker: gtester is no longer used Added tests for close and change of logfile. Add use of RCU for qemu_logfile. qemu_log_lock/unlock now preserves the qemu_logfile handle. Add a mutex to guarantee single writer to qemu_logfile handle. Cleaned up flow of code in qemu_set_log(), to simplify and clarify. Fix double free issue in qemu_set_log_filename(). ci: build out-of-tree travis.yml: Enable builds on arm64, ppc64le and s390x tests/test-util-filemonitor: Skip test on non-x86 Travis containers tests/hd-geo-test: Skip test when images can not be created iotests: Skip test 079 if it is not possible to create large files ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell59-732/+603
* More uses of RCU_READ_LOCK_GUARD (Dave, myself) * QOM doc improvments (Greg) * Cleanups from the Meson conversion (Marc-André) * Support for multiple -accel options (myself) * Many x86 machine cleanup (Philippe, myself) * tests/migration-test cleanup (Juan) * PC machine removal and next round of deprecation (Thomas) * kernel-doc integration (Peter, myself) # gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (87 commits) vga: cleanup mapping of VRAM for non-PCI VGA hw/display: Remove "rombar" hack from vga-pci and vmware_vga hw/pci: Remove the "command_serr_enable" property hw/audio: Remove the "use_broken_id" hack from the AC97 device hw/i386: Remove the deprecated machines 0.12 up to 0.15 hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge hw/pci-host/i440fx: Extract the IGD passthrough host bridge device hw/pci-host/i440fx: Use definitions instead of magic values hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE() hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h" hw/pci-host/i440fx: Correct the header description Fix some comment spelling errors. target/i386: remove unused pci-assign codes WHPX: refactor load library migration: check length directly to make sure the range is aligned memory: include MemoryListener documentation and some missing function parameters docs: add memory API reference memory.h: Silence kernel-doc complaints docs: Create bitops.rst as example of kernel-docs bitops.h: Silence kernel-doc complaints ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20display/bochs-display: fix memory leakCameron Esfahani1-0/+2
Fix memory leak in bochs_display_update(). Leaks 304 bytes per frame. Fixes: 33ebad54056 Signed-off-by: Cameron Esfahani <dirty@apple.com> Message-Id: <d6c26e68db134c7b0c7ce8b61596ca2e65e01e12.1576013209.git.dirty@apple.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-12-19numa: properly check if numa is supportedIgor Mammedov2-3/+2
Commit aa57020774b, by mistake used MachineClass::numa_mem_supported to check if NUMA is supported by machine and also as unrelated change set it to true for sbsa-ref board. Luckily change didn't break machines that support NUMA, as the field is set to true for them. But the field is not intended for checking if NUMA is supported and will be flipped to false within this release for new machine types. Fix it: - by using previously used condition !mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id the first time and then use MachineState::numa_state down the road to check if NUMA is supported - dropping stray sbsa-ref chunk Fixes: aa57020774b690a22be72453b8e91c9b5a68c516 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-19numa: remove not needed checkIgor Mammedov1-6/+1
Currently parse_numa_node() is always called from already numa enabled context. Drop unnecessary check if numa is supported. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-2-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-19virtio-blk: fix out-of-bounds access to bitmap in notify_guest_bhLi Hangjing1-1/+1
When the number of a virtio-blk device's virtqueues is larger than BITS_PER_LONG, the out-of-bounds access to bitmap[ ] will occur. Fixes: e21737ab15 ("virtio-blk: multiqueue batch notify") Cc: qemu-stable@nongnu.org Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Li Hangjing <lihangjing@baidu.com> Reviewed-by: Xie Yongji <xieyongji@baidu.com> Reviewed-by: Chai Wen <chaiwen@baidu.com> Message-id: 20191216023050.48620-1-lihangjing@baidu.com Message-Id: <20191216023050.48620-1-lihangjing@baidu.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-12-18qemu_log_lock/unlock now preserves the qemu_logfile handle.Robert Foley1-2/+2
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a handle to unlock. This allows for changing the handle during logging and ensures the lock() and unlock() are for the same file. Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock() calls (and the log("\n")), since the translator can longjmp out of the loop if it attempts to translate an instruction in an inaccessible page. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
2019-12-18hw/vfio/ap: drop local_err from vfio_ap_realizeVladimir Sementsov-Ogievskiy1-6/+3
No reason for local_err here, use errp directly instead. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20191205174635.18758-21-vsementsov@virtuozzo.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18hw/usb: rename Error ** parameter to more common errpVladimir Sementsov-Ogievskiy1-1/+1
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20191205174635.18758-18-vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18hw/tpm: rename Error ** parameter to more common errpVladimir Sementsov-Ogievskiy1-4/+4
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20191205174635.18758-17-vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18hw/sd: drop extra whitespace in sdhci_sysbus_realize() headerVladimir Sementsov-Ogievskiy1-1/+1
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20191205174635.18758-16-vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18hw/s390x: rename Error ** parameter to more common errpVladimir Sementsov-Ogievskiy2-2/+3
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20191205174635.18758-15-vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18hw/i386/amd_iommu: rename Error ** parameter to more common errpVladimir Sementsov-Ogievskiy1-7/+7
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20191205174635.18758-12-vsementsov@virtuozzo.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18hw/core/qdev: cleanup Error ** variablesVladimir Sementsov-Ogievskiy1-15/+13
Rename Error ** parameter in check_only_migratable to common errp. In device_set_realized: - Move "if (local_err != NULL)" closer to error setters. - Drop 'Error **local_errp': it doesn't save any LoCs, but it's very unusual. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191205174635.18758-10-vsementsov@virtuozzo.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-189pfs: make Error **errp const where it is appropriateVladimir Sementsov-Ogievskiy2-2/+2
Mostly, Error ** is for returning error from the function, so the callee sets it. However error_append_security_model_hint and error_append_socket_sockfd_hint get already filled errp parameter. They don't change the pointer itself, only change the internal state of referenced Error object. So we can make it Error *const * errp, to stress the behavior. It will also help coccinelle script (in future) to distinguish such cases from common errp usage. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Greg Kurz <groug@kaod.org> Message-Id: <20191205174635.18758-9-vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message replaced] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18ppc: make Error **errp const where it is appropriateVladimir Sementsov-Ogievskiy1-1/+1
Mostly, Error ** is for returning error from the function, so the callee sets it. However kvmppc_hint_smt_possible gets already filled errp parameter. It doesn't change the pointer itself, only change the internal state of referenced Error object. So we can make it Error *const * errp, to stress the behavior. It will also help coccinelle script (in future) to distinguish such cases from common errp usage. While there, rename the function to kvmppc_error_append_smt_possible_hint(). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20191205174635.18758-8-vsementsov@virtuozzo.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message replaced] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18Revert "ppc: well form kvmppc_hint_smt_possible error hint helper"Markus Armbruster1-1/+1
This reverts commit cdcca22aabafc0496894ce05c80097684832c7d9. Commit cdcca22aaba is a superseded version of the next commit that crept in by accident. Revert it, so the final version applies. Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.1 at 2025-08-11 05:42:09 +0000