aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2016-06-17vhost-net: save & restore vring enable stateMarc-André Lureau1-0/+11
A driver may change the vring enable state at run time but vhost-user backend may not be present (a contrived example is when the backend is disconnected and the device is reconfigured after driver rebinding) Restore the vring state when the vhost-user backend is started, so it can process the ring. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17vhost-net: save & restore vhost-user acked featuresMarc-André Lureau1-1/+26
The initial vhost-user connection sets the features to be negotiated with the driver. Renegotiation isn't possible without device reset. To handle reconnection of vhost-user backend, ensure the same set of features are provided, and reuse already acked features. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17vhost-net: do not crash if backend is not presentMarc-André Lureau1-1/+6
Do not crash when backend is not present while enabling the ring. A following patch will save the enabled state so it can be restored once the backend is started. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17pci: fix pci_requester_id()Peter Xu2-1/+77
This fix SID verification failure when IOMMU IR is enabled with PCI bridges. Existing pci_requester_id() is more like getting BDF info only. Renaming it to pci_get_bdf(). Meanwhile, we provide the correct implementation to get requester ID. VT-d spec 5.1.1 is a good reference to go, though it talks only about interrupt delivery, the rule works exactly the same for non-interrupt cases. Currently, there are three use cases for pci_requester_id(): - PCIX status bits: here we need BDF only, not requester ID. Replacing with pci_get_bdf(). - PCIe Error injection and MSI delivery: for both these cases, we are looking for requester IDs. Here we should use the new impl. To avoid a PCI walk every time we send MSI message, one requester_id cache field is added to PCIDevice to cache the result when initialize PCI device. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-14Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20160614-tag' ↵Peter Maydell3-10/+9
into staging Xen 2016/06/14 # gpg: Signature made Tue 14 Jun 2016 16:01:52 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20160614-tag: xen: Clean up includes xen/blkif: avoid double access to any shared ring request fields Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdmaKONRAD Frederic1-1/+31
This adds the DP and the DPDMA to the Zynq MP platform. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce xlnx-dpKONRAD Frederic2-0/+1337
This is the implementation of the DisplayPort. It has an aux-bus to access dpcd and edid. Graphic plane is connected to the channel 3. Video plane is connected to the channel 0. Audio stream are connected to the channels 4 and 5. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1465833014-21982-9-git-send-email-fred.konrad@greensocs.com [PMM: fixed format strings] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce xlnx-dpdmaKONRAD Frederic2-0/+787
This is the implementation of the DPDMA. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-8-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c-ddc.c: Implement DDC I2C slavePeter Maydell2-0/+309
Implement an I2C slave which implements DDC and returns the EDID data for an attached monitor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com - Rebased on the current master. - Modified for QOM. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> [PMM: actually wire up the vmstate to dc->vmsd] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce dpcd moduleKONRAD Frederic2-0/+174
This introduces dpcd module. It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce aux-busKONRAD Frederic2-0/+293
This introduces a new bus: aux-bus. It contains an address space for aux slaves devices and a bridge to an I2C bus for I2C through AUX transactions. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2c: Factor our send() and recv() common logicPeter Crosthwaite1-18/+34
Most of the control flow logic between send and recv (error checking etc) is the same. Factor this out into a common send_recv() API. This is then usable by clients, where the control logic for send and receive differs only by a boolean. E.g. if (send) i2c_send(...): else i2c_recv(...); becomes: i2c_send_recv(... , send); Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com Changes from FK: * Rebased on master. * Rebased on my i2c broadcast patch. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2c: implement broadcast writeKONRAD Frederic1-55/+79
This does a write to every slaves when the I2C bus get a write to address 0. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2cbus: remove unused dev fieldKONRAD Frederic1-1/+0
The dev field in i2cbus is not used. So just drop it. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/sd: QOM'ify pl181.cxiaoqiang zhao1-10/+16
split the old SysBus init function into an instance_init and a Device realize function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-13-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/dma: QOM'ify pxa2xx_dma.cxiaoqiang zhao1-16/+22
split the old SysBus init function into an instance_init and a Device realize function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-12-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/misc: QOM'ify mst_fpga.cxiaoqiang zhao1-7/+6
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/misc: QOM'ify exynos4210_pmu.cxiaoqiang zhao1-6/+5
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/misc: QOM'ify arm_l2x0.cxiaoqiang zhao1-6/+5
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/gpio: QOM'ify zaurus.cxiaoqiang zhao1-8/+6
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-8-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/gpio: QOM'ify pl061.cxiaoqiang zhao1-16/+8
* Merge the pl061_initfn into pl061_init * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/gpio: QOM'ify omap_gpio.cxiaoqiang zhao1-30/+31
* Split the old SysBus init into an instance_init and DeviceClass::realize function * Drop the SysBus init function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-6-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify versatile_i2c.cxiaoqiang zhao1-13/+6
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify omap_i2c.cxiaoqiang zhao1-17/+25
* Split the omap_i2c_init into an instance_init and realize function * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify exynos4210_i2c.cxiaoqiang zhao1-7/+6
* Rename the exynos4210_i2c_realize to exynos4210_i2c_init * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify bitbang_i2c.cxiaoqiang zhao1-8/+6
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-2-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: create the 2.7 machine typeAndrew Jones1-2/+18
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1465746713-30414-5-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: introduce DEFINE_VIRT_MACHINE_AS_LATESTAndrew Jones1-3/+10
Create two variants of DEFINE_VIRT_MACHINE. One, just called DEFINE_VIRT_MACHINE, that does not set properties that only the latest machine type should have, and another that does. This will hopefully reduce potential for errors when adding new versions. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1465746713-30414-4-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: introduce DEFINE_VIRT_MACHINEAndrew Jones1-17/+24
Use DEFINE_VIRT_MACHINE to generate versioned machine type info. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465746713-30414-3-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: separate versioned type-init codeAndrew Jones1-6/+10
Rename machvirt_info (which is specifically for 2.6 TypeInfo) to machvirt_2_6_info, and separate the type registration of the abstract machine type from the versioned type. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465746713-30414-2-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI tableShannon Zhao1-0/+4
Add PMU IRQ number in ACPI table, then we can use PMU in guest through ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: Add PMU node for virt machineShannon Zhao1-0/+33
Add a virtual PMU device for virt machine while use PPI 7 for PMU overflow interrupt number. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14xen: Clean up includesPeter Maydell1-4/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-06-14qdev_try_create(): Assert that devices we put onto the system bus are ↵Peter Maydell1-0/+7
SysBusDevices If qdev_try_create() is passed NULL for the bus, it will automatically put the newly created device onto the default system bus. However if the device is not actually a SysBusDevice then this will result in later crashes (for instance when running the monitor "info qtree" command) because code reasonably assumes that all devices on the system bus are system bus devices. Generally the mistake is that the calling code should create the object with object_new(TYPE_FOO) rather than qdev_create(NULL, TYPE_FOO); see commit 6749695eaaf346c1 for an example of fixing this bug. Assert in qdev_try_create() if the device isn't suitable to put on the system bus, so that this mistake results in failure earlier and more reliably. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-06-14s390x: Limit s390-ccw machines to 248 CPUsChristian Borntraeger1-1/+1
The sclp scp read info call fills in a buffer with information about the system. With more than 248 CPUs we overflow the 4k buffer of the SCCB, leading to random data corruption. Basically ALL guest operating systems call scp read info, so let's limit the machines to 248 CPUs to make it obvious that >=249 does not work. As KVM also limits itself to 248 and TCG on s390 does not support SMP, this should cause no regression for any user as no VMs with more than 248 VCPUs were ever possible. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14virtio-ccw: Provide traces for indicator changesChristian Borntraeger1-0/+1
This allows to trace changes in the summary and queue indicators for the non-irqfd case. For irqfd, kernel traces are needed instead. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x/css: introduce property type for device idsCornelia Huck3-48/+114
Let's introduce a CssDevId to handle device ids of the xx.x.xxxx type used for channel devices. This has some benefits: - We can use them in virtio-ccw and split the validity checks for a channel device id in general from the constraint checking within the virtio-ccw scope. - We can reuse the device id type for future non-virtio channel devices. While we're at it, improve the validity checks and disallow e.g. trailing characters. Suggested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x/css: clear IO irqs when generating IPI CRWHalil Pasic1-3/+40
According to the Principles of Operation (more precisely the subsection 'Channel-Report Word'), a subchannel put into the installed parameters initialized state is in the same state as after an I/O system reset (just parameters possibly changed). This implies that any I/O interrupts for that subchannel are no longer pending (as I/O system resets clear I/O interrupts). Therefore, we need an interface to clear pending I/O interrupts. Make css_generate_sch_crws clear the pending IO interrupts for the subchannel. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x/kvm: add interface for clearing IO irqsHalil Pasic2-0/+34
According to the platform specification, under certain conditions, pending IO interruptions have to be cleared. Let's add an interface for that. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14spapr: Ensure all LMBs are represented in ibm,dynamic-memoryBharata B Rao1-20/+37
Memory hotplug can fail for some combinations of RAM and maxmem when DDW is enabled in the presence of devices like nec-usb-xhci. DDW depends on maximum addressable memory returned by guest and this value is currently being calculated wrongly by the guest kernel routine memory_hotplug_max(). While there is an attempt to fix the guest kernel, this patch works around the problem within QEMU itself. memory_hotplug_max() routine in the guest kernel arrives at max addressable memory by multiplying lmb-size with the lmb-count obtained from ibm,dynamic-memory property. There are two assumptions here: - All LMBs are part of ibm,dynamic memory: This is not true for PowerKVM where only hot-pluggable LMBs are present in this property. - The memory area comprising of RAM and hotplug region is contiguous: This needn't be true always for PowerKVM as there can be gap between boot time RAM and hotplug region. To work around this guest kernel bug, ensure that ibm,dynamic-memory has information about all the LMBs (RMA, boot-time LMBs, future hotpluggable LMBs, and dummy LMBs to cover the gap between RAM and hotpluggable region). RMA is represented separately by memory@0 node. Hence mark RMA LMBs and also the LMBs for the gap b/n RAM and hotpluggable region as reserved and as having no valid DRC so that these LMBs are not considered by the guest. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14macio: call dma_memory_unmap() at the end of each DMA transferMark Cave-Ayland1-20/+26
This ensures that the underlying memory is marked dirty once the transfer is complete and resolves cache coherency problems under MacOS 9. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14ppc: Add PowerISA 2.07 compatibility modeThomas Huth1-2/+4
Make sure that guests can use the PowerISA 2.07 CPU sPAPR compatibility mode when they request it and the target CPU supports it. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14ppc: Split pcr_mask settings into supported bits and the register maskThomas Huth1-2/+2
The current pcr_mask values are ambiguous: Should these be the mask that defines valid bits in the PCR register? Or should these rather indicate which compatibility levels are possible? Anyway, POWER6 and POWER7 should certainly not use the same values here. So let's introduce an additional variable "pcr_supported" here which is used to indicate the valid compatibility levels, and use pcr_mask to signal the valid bits in the PCR register. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14ppc/spapr: Refactor h_client_architecture_support() CPU parsing codeThomas Huth1-25/+36
The h_client_architecture_support() function has become quite big and nested already. So factor out the code that takes care of the sPAPR compatibility PVRs (which will be modified by the following patches). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-13xen/blkif: avoid double access to any shared ring request fieldsJan Beulich2-6/+8
Commit f9e98e5d7a ("xen/blkif: Avoid double access to src->nr_segments") didn't go far enough: src->operation is also being used twice. And nothing was done to prevent the compiler from using the source side of the copy done by blk_get_request() (granted that's very unlikely). Move the barrier()s up, and add another one to blk_get_request(). Note that for completing XSA-155, the barrier() getting added to blk_get_request() would suffice, and hence the changes to xen_blkif.h are more like just cleanup. And since, as said, the unpatched code getting compiled to something vulnerable is very unlikely (and not observed in practice), this isn't being viewed as a new security issue. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-06-13vl: Eliminate usb_enabled()Eduardo Habkost7-7/+7
This wrapper for machine_usb(current_machine) is not necessary, replace all usages of usb_enabled() with machine_usb(). Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: qemu-arm@nongnu.org Cc: qemu-ppc@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-13pxa2xx: Unconditionally enable USB controllerEduardo Habkost1-8/+4
Simplify initialization logic by removing the usb_enabled() check. The USB controller is part of the SoC, so it doesn't make sense to create a system where it is not present. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org, Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465419025-21519-2-git-send-email-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-13hw/usb/dev-network.c: Use ldl_le_p() and stl_le_p()Peter Maydell1-33/+30
Use stl_le_p() and ldl_le_p() to read and write data from buffers, rather than using pointer casts and cpu_to_le32() for writes and le32_to_cpup() for reads. This: * avoids lots of casts * works even if the buffer isn't as aligned as the host would like * avoids using the *_to_cpup() functions which we want to get rid of Note that there may still be some places where a pointer from the guest is cast to a pointer to a host structure; these would also have to be changed for the device to work on a host CPU which enforces alignment restrictions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1465573077-29221-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-13usb-host: add special case for bus+addrGerd Hoffmann1-4/+52
This patch changes usb-host behavior in case we hostbus= and hostaddr= properties are used to identify the usb device in question. Instead of adding the device to the hotplug watchlist we try to open directly using the given bus number and device address. Putting a device specified by hostaddr to the hotplug watchlist isn't a great idea as the address isn't a fixed property. It changes every time the device is plugged in. So considering this case as "use the device at bus:addr _now_" is more sane. Also usb-host will throw errors in case it can't initialize the host device. Note: For devices on the hotplug watchlist (hostport or vendorid or productid specified) qemu continues to ignore errors and keeps monitoring the usb bus to see if the device eventually shows up. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1464945175-28939-1-git-send-email-kraxel@redhat.com
2016-06-09cpu-exec: Rename cpu_resume_from_signal() to cpu_loop_exit_noexc()Peter Maydell1-1/+1
The function cpu_resume_from_signal() is now always called with a NULL puc argument, and is rather misnamed since it is never called from a signal handler. It is essentially forcing an exit to the top level cpu loop but without raising any exception, so rename it to cpu_loop_exit_noexc() and drop the useless unused argument. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Riku Voipio <riku.voipio@linaro.org> Message-id: 1463494687-25947-4-git-send-email-peter.maydell@linaro.org
generated by cgit v1.1 at 2025-01-04 03:51:23 +0000