aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2016-06-29serial: simplify tsr_retry resetPaolo Bonzini1-3/+1
Move common code outside the if, and reset tsr_retry even in loopback mode. Right now it cannot become non-zero, but it will be possible as soon as we start respecting the baud rate. Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29serial: make tsr_retry unsignedPaolo Bonzini1-4/+8
It can never become negative; reflect this in the type of the field and simplify the conditions. Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.cLin Ma2-4/+3
In function pci_assign_dev_load_option_rom, For those pci devices don't have 'rom' file under sysfs or if loading ROM from external file, The function returns NULL, and won't set the passed 'size' variable. In these 2 cases, qemu still reports "Invalid ROM" error message, Users may be confused by it. Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <1466010327-22368-1-git-send-email-lma@suse.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29scsi: esp: fix migrationPaolo Bonzini1-2/+3
Commit 926cde5 ("scsi: esp: make cmdbuf big enough for maximum CDB size", 2016-06-16) changed the size of a migrated field. Split it in two parts, and only migrate the second part in a new vmstate version. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29MC146818 RTC: add GPIO access to output IRQEfimov Vasily1-2/+4
The MC146818 RTC device has output IRQ line. Currently the corresponding field is only accessible through direct access. Such access violates Qemu model. The patch makes the field accessible through GPIO. It also updates the setting of the IRQ during initialization. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29isa: introduce wrapper isa_connect_gpio_outEfimov Vasily1-0/+7
Currently a direct access to the device structure field is used to connect ISA device IRQ to the bus. GPIO access should be used instead if possible. The patch adds wrapper isa_connect_gpio_out. The function connects specified output GPIO to specified ISA IRQ. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 LPC: move call of isa_bus_irqs to 'realize' methodEfimov Vasily2-3/+2
The isa_bus_irqs function initializes ISA bus IRQ array pointer with specified value. Previously the ICH9 LPC bridge model did not have its own IRQs but only IRQ pointer cache. And same GSI were used for ISA bus and other sources behind the bridge (PCI, SCI). Hence, the pc_q35_init was only possible place to setup both ISA bus IRQs and the bridge IRQ cache. As a result, the call of isa_bus_irqs was made from pc_q35_init. Now the ICH9 LPC bridge has its own output IRQs which are connected to GSI. The output IRQs are already used to route IRQs from PCI and SCI. The patch makes the ICH9 LPC bridge output IRQs to used for ISA bus too. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 LPC: handle GSI as qdev GPIOEfimov Vasily2-1/+8
The ICH9 LPC bridge has 24 output IRQs connected to GSI. Currently the IRQs are referenced by pointers. The pointers are initialized at startup by direct access to the structure fields. This violates Qemu device model. The patch makes the IRQs handling to use GPIO model. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: unify pic and ioapic IRQ vectorsPaolo Bonzini2-4/+3
ich9->pic and ich9->ioapic differ for the first 16 GSIs (because ich9->pic is wired to 8259+IOAPIC but ich9->ioapic is wired to IOAPIC only). However, ich9->ioapic is never used for the first 16 GSIs, so the two vectors can be merged. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: clean up ich9_lpc_update_pic/ich9_lpc_update_apic and callersPaolo Bonzini1-23/+17
Make ich9_lpc_update_pic take care only of GSIs 0-15, and ich9_lpc_update_apic take care only of GSIs 16-23. Assert that they are called with the correct GSI indices. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: call ich9_lpc_update_pic for disabled pirqsPaolo Bonzini1-3/+0
An asserted pirq can be disabled and the corresponding GSIs should then go down to 0. However, because of the conditional in ich9_lpc_update_by_pirq, the legacy 8259 pin could remain stuck to 1. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 SMB: make TYPE_ICH9_SMB_DEVICE macro publicEfimov Vasily1-1/+0
ICH9 SMB bridge can be created using qdev API despite existence of helper function. The type name is needed for such creation. Using a preprocessor alias instead the string type name itself is preferable. The patch makes the alias accessible through the header. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29port92: handle A20 IRQ as GPIOEfimov Vasily1-5/+5
The port92 device has outgouing IRQ line A20. Currently the IRQ is referenced by a pointer which normally is set during machine initialization. The pointer is never changed at runtime. Hence, common GPIO model can be applied to A20 IRQ line. Note that checking for IRQ to be connected as in previous version of code is not required qemu_set_irq will do it. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29pckbd: handle A20 IRQ as GPIOEfimov Vasily1-14/+7
The i8042 device has outgouing IRQ line A20. Currently the IRQ is referenced by a pointer which normally is set during machine initialization. The pointer is never changed at runtime. So common GPIO model can be applied to A20 IRQ line. Note that checking for IRQ to be connected as in previous version of code is not required because qemu_set_irq will do it. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29pc_q35: configure Q35 instance using propertiesEfimov Vasily1-6/+12
Currently, Q35 instance is configured using direct access to structure fields. The patch uses property interface to set the fields. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29Q35: implement property interfece to several parametersEfimov Vasily1-0/+20
During creation of Q35 instance several parameters are set using direct access. It violates Qemu device model. Correctly, the parameters should be handled as object properties. The patch adds four link type properties for fields: mch.ram_memory mch.pci_address_space mch.system_memory mch.address_space_io And, it adds two size type properties for fields: mch.below_4g_mem_size mch.above_4g_mem_size Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29pflash: make TYPE_CFI_PFLASH0{1,2} macros publicEfimov Vasily2-2/+0
qdev API can be used to create CFI pflash devices despite existance of helper functions. The type name is needed in course of such creation. Using the preprocessor alias instead of the string literal itself is preferable. The patch makes the aliases accessible through the header. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29vmport: identify vmport type by macro TYPE_VMPORTEfimov Vasily1-1/+0
Currently vmport device is identified by the string literal. Using a preprocessor alias instead is preferable. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29pcspk: convert "pit" property type from ptr to linkEfimov Vasily1-2/+7
The speaker device needs pointer to ISA PIT device to operate. But according to qdev-properties.h, properties of pointer type should be avoided. It seems a link type property is a good substitution. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ide: move headers to include folderEfimov Vasily4-1117/+1
The patch moves "hw/ide/achi.h", "hw/ide/pci.h" and "hw/ide/internal.h" headers to corresponding folders inside "include" folder alike other Qemu headers. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-24pc: acpi: drop intermediate PCMachineState.node_cpuIgor Mammedov2-18/+9
PCMachineState.node_cpu was used for mapping APIC ID to numa node id as CPU entries in SRAT used to be built on sparse APIC ID bitmap (up to apic_id_limit). However since commit 5803fce pc: acpi: SRAT: create only valid processor lapic entries CPU entries in SRAT aren't build using apic bitmap but using 0..maxcpus index instead which is also used for creating numa_info[x].node_cpu map. So instead of doing useless intermediate conversion from 1. node by cpu index -> node by apic id i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu 2. apic id -> srat entry PMX PCMachineState.node_cpu[apic id] -> PMX value use numa_info[x].node_cpu map directly like ARM does and do 1. numa_info[x].node_cpu -> PMX value using index in range 0..maxcpus and drop not necessary PCMachineState.node_cpu and related code. That also removes the last (not counting legacy hotplug) dependency of ACPI code on apic_id_limit and need to allocate huge sparse PCMachineState.node_cpu array in case of 32-bit APIC IDs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: use new CPU hotplug interface since 2.7 machine typeIgor Mammedov7-2/+109
For compatibility reasons PC/Q35 will start with legacy CPU hotplug interface by default but with new CPU hotplug AML code since 2.7 machine type. That way legacy firmware that doesn't use QEMU generated ACPI tables will be able to continue using legacy CPU hotplug interface. While new machine type, with firmware supporting QEMU provided ACPI tables, will generate new CPU hotplug AML, which will switch to new CPU hotplug interface when guest OS executes its _INI method on ACPI tables loading. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add cpu._OST handlingIgor Mammedov4-0/+90
it adds HW and AML parts for CPU_Device._OST method handling to allow OSPM reports status of hot-(un)plug operation. And extends QMP command query-acpi-ospm-status to report CPU's OST info along with already reported PC-DIMM devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: implement hot-remove parts of CPU hotplug interfaceIgor Mammedov5-5/+150
it adds hw registers needed for handling CPU hot-remove and corresponding AML methods to request and eject a CPU with necessary hotplug callbacks in pc,piix4,ich9 code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: implement hot-add parts of CPU hotplug interfaceIgor Mammedov2-1/+153
it adds hw registers needed for handling CPU hot-add and corresponding AML methods to handle hot-add events on guest side. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov3-18/+29
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add CPU devices AML with _STA methodIgor Mammedov5-6/+260
it adds CPU objects to DSDT with _STA method and QEMU side of CPU hotplug interface initialization with registers sufficient to handle _STA requests, including necessary hotplug callbacks in piix4,ich9 code. Hot-(un)plug hw/acpi parts will be added by corresponding follow up patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: piix4/ich9: add 'cpu-hotplug-legacy' propertyIgor Mammedov2-2/+45
It will be used to select which hotplug call-back is called and for switching from legacy mode into new one. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24i386: pci-assign: Fix MSI-X table sizeIdo Yariv1-7/+7
The current code creates a whole page mmio region for the MSI-X table size. However, the page containing the MSI-X table may contain other registers not related to MSI-X. Creating an mmio region for the whole page masks such registers and may break drivers in the guest OS. Since maximal number of entries is known, use that instead to deduce the table size when setting up the mmio region. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: support Set Namespace Label Data functionXiao Guangrong1-1/+43
Function 6 is used to set Namespace Label Data Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: support Get Namespace Label Data functionXiao Guangrong1-1/+82
Function 5 is used to get Namespace Label Data Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: support Get Namespace Label Size functionXiao Guangrong1-3/+127
Function 4 is used to get Namespace label size Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: check revisionXiao Guangrong1-0/+7
Currently only revision 1 is supported Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: abstract the operations for root & nvdimm devicesXiao Guangrong1-18/+56
It separates the operations between root device and nvdimm devices in order to introducing label functions support for nvdimm device Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: check UUIDXiao Guangrong1-6/+26
Check arg0 which indicates UUID to see if it is valid Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: save arg3 of _DSM methodXiao Guangrong1-0/+20
Check if the input Arg3 is valid then store it into ARG3 if it is needed Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm acpi: set HDLE properlyXiao Guangrong1-10/+12
Now we pass HDLE to Qemu properly, use 0 for root device and use the handle for nvdimm devices Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: add aml_call5Xiao Guangrong1-0/+14
It will be used by NVDIMM ACPI Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: add aml_object_typeXiao Guangrong1-0/+8
Implement ObjectType which is used by NVDIMM _DSM method in later patch Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24nvdimm: support nvdimm labelXiao Guangrong1-0/+132
Introduce a parameter, 'label-size', which is the size of nvdimm label data area which is reserved at the end of backend memory. It is required at least 128k Two callbacks, read_label_data() and write_label_data(), are used to operate the label area Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc-dimm: introduce get_vmstate_memory_region callbackXiao Guangrong1-2/+12
This callback returns the MemoryRegion that is the memory of dimm should be kept during live migration nvdimm device is different with pc-dimm as its memory includes not only the MemoryRegion directly mapping to guest's address space but also the memory used as label data Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: Add IPMI table entriesCorey Minyard3-0/+118
Use the ACPI table construction tools to create an ACPI entry for IPMI. This adds a function called build_acpi_ipmi_devices to add an DSDT entry for IPMI if IPMI is compiled in and an IPMI device exists. It also adds a dummy function if IPMI is not compiled in. This conforms to section "C3-2 Locating IPMI System Interfaces in ACPI Name Space" in the IPMI 2.0 specification. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24ipmi: Add SMBIOS table entryCorey Minyard3-0/+120
Add an IPMI table entry to the SMBIOS. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24smbios: Move table build tools into an include file.Corey Minyard2-64/+93
This will let things in other files (like IPMI) build SMBIOS tables. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-23Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160623' ↵Peter Maydell3-9/+14
into staging ppc patch queue for 2016-06-23 Currently outstanding patches for spapr, target-ppc and related devices. This batch has: * Significant new progress towards full support for hypervisor mode * Assorted bugfixes * Some preliminary patches towards dynamic DMA window support The last involves a change to memory.c, which Paolo has said I can take through this tree. # gpg: Signature made Thu 23 Jun 2016 06:47:53 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.7-20160623: ppc: Disable huge page support if it is not available for main RAM ppc: Add P7/P8 Power Management instructions ppc: Move exception generation code out of line ppc: Turn a bunch of booleans from int to bool ppc: Add real mode CI load/store instructions for P7 and P8 ppc: Rework generation of priv and inval interrupts ppc: Fix generation if ISI/DSI vs. HV mode ppc: Fix POWER7 and POWER8 exception definitions ppc: fix exception model for HV mode ppc: define a default LPCR value ppc: Fix rfi/rfid/hrfi/... emulation memory: Add reporting of supported page sizes ppc: Improve emulation of THRM registers target-ppc: Fix rlwimi, rlwinm, rlwnm again ppc64: disable gen_pause() for linux-user mode tests: Use '+=' to add additional tests, not '=' powerpc/mm: Update the WIMG check during H_ENTER Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-23Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20160622-2' into ↵Peter Maydell3-40/+58
staging usb: add hotplug support for usb-bot and usb-uas. # gpg: Signature made Wed 22 Jun 2016 12:45:46 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-usb-20160622-2: usb-uas: hotplug support usb-bot: hotplug support usb: Add QOM property "attached". usb: make USBDevice->attached bool usb-storage: qcow2 encryption support is finally gone, zap dead code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-22usb-uas: hotplug supportGerd Hoffmann1-0/+5
Make attached property settable and turns off auto-attach in case the device was hotplugged. Hotplugging works simliar to usb-bot now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1465984019-28963-6-git-send-email-kraxel@redhat.com
2016-06-22usb-bot: hotplug supportGerd Hoffmann1-2/+6
This patch marks usb-bot as hot-pluggable device, makes attached property settable and turns off auto-attach in case the device was hotplugged. Hot-plugging a usb-bot device with one or more scsi devices can be done this way now: (1) device-add usb-bot,id=foo (2) device-add scsi-{hd,cd},bus=foo.0,lun=0 (2b) optionally add more devices (luns 0 ... 15). (3) qom-set foo.attached = true Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1465984019-28963-5-git-send-email-kraxel@redhat.com
2016-06-22usb: Add QOM property "attached".Gerd Hoffmann1-0/+43
USB devices in attached state are visible to the guest. This patch adds a QOM property for this. Write access is opt-in per device. Some devices manage attached state automatically (usb-host, usb-serial, usb-redir), so we can't enable write access universally but have to do it on a case by case base. So far, no device opts in. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1465984019-28963-4-git-send-email-kraxel@redhat.com [ minor codestyle fix ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-22usb: make USBDevice->attached boolGerd Hoffmann1-4/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1465984019-28963-3-git-send-email-kraxel@redhat.com
generated by cgit v1.1 at 2024-09-12 01:52:50 +0000