aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2017-10-06390x/css: introduce maximum data address checkingHalil Pasic1-0/+10
The architecture mandates the addresses to be accessed on the first indirection level (that is, the data addresses without IDA, and the (M)IDAW addresses with (M)IDA) to be checked against an CCW format dependent limit maximum address. If a violation is detected, the storage access is not to be performed and a channel program check needs to be generated. As of today, we fail to do this check. Let us stick even closer to the architecture specification. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06virtio-ccw: use ccw data streamHalil Pasic1-109/+46
Replace direct access which implicitly assumes no IDA or MIDA with the new ccw data stream interface which should cope with these transparently in the future. Note that checking the return code for ccw_dstream_* will be done in a follow-on patch. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-4-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/css: use ccw data streamHalil Pasic1-4/+5
Replace direct access which implicitly assumes no IDA or MIDA with the new ccw data stream interface which should cope with these transparently in the future. Note that checking the return code for ccw_dstream_* will be done in a follow-on patch. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-3-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/css: introduce css data streamHalil Pasic1-0/+55
This is a preparation for introducing handling for indirect data addressing and modified indirect data addressing (CCW). Here we introduce an interface which should make the addressing scheme transparent for the client code. Here we implement only the basic scheme (no IDA or MIDA). Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x: use generic cpu_model parsingIgor Mammedov1-25/+3
Define default CPU type in generic way in machine class_init and let common machine code handle cpu_model parsing. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-05Merge remote-tracking branch 'remotes/kraxel/tags/usb-20171005-pull-request' ↵Peter Maydell3-5/+4
into staging usb bugfixes. # gpg: Signature made Thu 05 Oct 2017 10:04:15 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20171005-pull-request: usb: fix host-stub.c build race usb: Use angle brackets for cacard include directive usb: fix libusb config variable name. hw/usb/bus: Remove bad object_unparent() from usb_try_create_simple() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-05usb: fix host-stub.c build raceGerd Hoffmann1-0/+1
Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20171004125210.7817-1-kraxel@redhat.com
2017-10-03vfio/pci: Add NVIDIA GPUDirect Cliques supportAlex Williamson3-0/+118
NVIDIA has defined a specification for creating GPUDirect "cliques", where devices with the same clique ID support direct peer-to-peer DMA. When running on bare-metal, tools like NVIDIA's p2pBandwidthLatencyTest (part of cuda-samples) determine which GPUs can support peer-to-peer based on chipset and topology. When running in a VM, these tools have no visibility to the physical hardware support or topology. This option allows the user to specify hints via a vendor defined capability. For instance: <qemu:commandline> <qemu:arg value='-set'/> <qemu:arg value='device.hostdev0.x-nv-gpudirect-clique=0'/> <qemu:arg value='-set'/> <qemu:arg value='device.hostdev1.x-nv-gpudirect-clique=1'/> <qemu:arg value='-set'/> <qemu:arg value='device.hostdev2.x-nv-gpudirect-clique=1'/> </qemu:commandline> This enables two cliques. The first is a singleton clique with ID 0, for the first hostdev defined in the XML (note that since cliques define peer-to-peer sets, singleton clique offer no benefit). The subsequent two hostdevs are both added to clique ID 1, indicating peer-to-peer is possible between these devices. QEMU only provides validation that the clique ID is valid and applied to an NVIDIA graphics device, any validation that the resulting cliques are functional and valid is the user's responsibility. The NVIDIA specification allows a 4-bit clique ID, thus valid values are 0-15. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-10-03vfio/pci: Add virtual capabilities quirk infrastructureAlex Williamson3-0/+13
If the hypervisor needs to add purely virtual capabilties, give us a hook through quirks to do that. Note that we determine the maximum size for a capability based on the physical device, if we insert a virtual capability, that can change. Therefore if maximum size is smaller after added virt capabilities, use that. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-10-03vfio/pci: Do not unwind on errorAlex Williamson1-2/+2
If vfio_add_std_cap() errors then going to out prepends irrelevant errors for capabilities we haven't attempted to add as we unwind our recursive stack. Just return error. Fixes: 7ef165b9a8d9 ("vfio/pci: Pass an error object to vfio_add_capabilities") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-10-03Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+2
* iothread bugfix (Eduardo) * Linux headers sync (Dave) * .gitignore fix (Eric) * KVM capability check fixes (Greg) * kvmclock fix (Jim) # gpg: Signature made Mon 02 Oct 2017 14:31:09 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: kvmclock: use the updated system_timer_msr kvm: check KVM_CAP_NR_VCPUS with kvm_vm_check_extension() kvm: check KVM_CAP_SYNC_MMU with kvm_vm_check_extension() linux-headers: sync against v4.14-rc1 iothread: Make iothread_stop() idempotent scsi: Ignore executable for in-tree builds Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-03Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-10-02' into ↵Peter Maydell2-35/+36
staging QAPI patches for 2017-10-02 # gpg: Signature made Mon 02 Oct 2017 12:09:32 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2017-10-02: watchdog: Allow setting action on the fly watchdog.h: Drop local redefinition of actions enum qapi: Rename WatchdogExpirationAction enum Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-02kvmclock: use the updated system_timer_msrJim Somerville1-1/+2
Fixes e2b6c17 (kvmclock: update system_time_msr address forcibly) which makes a call to get the latest value of the address stored in system_timer_msr, but then uses the old address anyway. Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com> Message-Id: <59b67db0bd15a46ab47c3aa657c81a4c11f168ea.1506702472.git.Jim.Somerville@windriver.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-02watchdog: Allow setting action on the flyMichal Privoznik1-1/+7
Currently, the only time that users can set watchdog action is at the start as all we expose is this -watchdog-action command line argument. This is suboptimal when users want to plug the device later via monitor. Alternatively, they might want to change the action for already existing device on the fly. Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1447169 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <35d6ce6fe3d357122d73b8272bc8198134c74104.1504771369.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> [Missing colon in doc comment fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-10-02watchdog.h: Drop local redefinition of actions enumMichal Privoznik2-28/+23
We already have enum that enumerates all the actions that a watchdog can take when hitting its timeout: WatchdogAction. Use that instead of inventing our own. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <ce2790634e6a1b3b6cf90462399d17bad83f0290.1504771369.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-10-02qapi: Rename WatchdogExpirationAction enumMichal Privoznik1-7/+7
The new name is WatchdogAction which is shorter, Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <dbd61a0928821348486d0d6260be2bd3b02b6402.1504771369.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-09-29usb: Use angle brackets for cacard include directiveFam Zheng1-1/+1
This is a library header, so angle brackets are more appropriate; also move the line to before QEMU headers, as is recommended in HACKING. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20170920085952.3872-1-famz@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29usb: fix libusb config variable name.Gerd Hoffmann1-1/+1
Cc: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 4e5ee5b21c84fe3023a64b5cc2e12a52ab0597c1 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 20170926063820.30773-1-kraxel@redhat.com
2017-09-29hw/usb/bus: Remove bad object_unparent() from usb_try_create_simple()Thomas Huth1-3/+1
Valgrind detects an invalid read operation when hot-plugging of an USB device fails: $ valgrind x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S ==30598== Memcheck, a memory error detector ==30598== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al. ==30598== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info ==30598== Command: x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S ==30598== QEMU 2.10.50 monitor - type 'help' for more information (qemu) device_add usb-tablet (qemu) device_add usb-tablet (qemu) device_add usb-tablet (qemu) device_add usb-tablet (qemu) device_add usb-tablet (qemu) device_add usb-tablet ==30598== Invalid read of size 8 ==30598== at 0x60EF50: object_unparent (object.c:445) ==30598== by 0x580F0D: usb_try_create_simple (bus.c:346) ==30598== by 0x581BEB: usb_claim_port (bus.c:451) ==30598== by 0x582310: usb_qdev_realize (bus.c:257) ==30598== by 0x4CB399: device_set_realized (qdev.c:914) ==30598== by 0x60E26D: property_set_bool (object.c:1886) ==30598== by 0x61235E: object_property_set_qobject (qom-qobject.c:27) ==30598== by 0x61000F: object_property_set_bool (object.c:1162) ==30598== by 0x4567C3: qdev_device_add (qdev-monitor.c:630) ==30598== by 0x456D52: qmp_device_add (qdev-monitor.c:807) ==30598== by 0x470A99: hmp_device_add (hmp.c:1933) ==30598== by 0x3679C3: handle_hmp_command (monitor.c:3123) The object_unparent() here is not necessary anymore since commit 69382d8b3e8600b3 ("qdev: Fix object reference leak in case device.realize() fails"), so let's remove it now. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1506526106-30971-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29virtio-input: send rel-wheel events for wheel buttonsGerd Hoffmann1-5/+114
qemu uses wheel-up/down button events for mouse wheel input, however linux applications typically want REL_WHEEL events. This fixes wheel with linux guests. Tested with X11/wayland, and windows virtio-input driver. Based on a patch from Marc. Added property to enable/disable wheel axis. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170926113243.26081-1-kraxel@redhat.com
2017-09-27Merge remote-tracking branch ↵Peter Maydell48-64/+167
'remotes/dgilbert/tags/pull-migration-20170927a' into staging Migration pull 2017-09-27 # gpg: Signature made Wed 27 Sep 2017 14:56:23 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170927a: migration: Route more error paths migration: Route errors up through vmstate_save migration: wire vmstate_save_state errors up to vmstate_subsection_save migration: Check field save returns migration: check pre_save return in vmstate_save_state migration: pre_save return int migration: disable auto-converge during bulk block migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27migration: Route more error pathsDr. David Alan Gilbert2-9/+8
vmstate_save_state is called in lots of places. Route error returns from the easier cases back up; there are lots of more complex cases where their own error paths need fixing. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-7-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Commit message fix up as Peter's review
2017-09-27migration: pre_save return intDr. David Alan Gilbert46-55/+159
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27macio: use object link between MACIO_IDE and MAC_DBDMA objectMark Cave-Ayland3-5/+9
Using a standard QOM object link we can pass a reference to the MAC_DBDMA controller to the MACIO_IDE object which removes the last external parameter to macio_ide_register_dma(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27macio: pass channel into MACIOIDEState via qdev propertyMark Cave-Ayland3-5/+13
One of the reasons macio_ide_register_dma() needs to exist is because the channel id isn't passed into the MACIO_IDE object. Pass in the channel id using a qdev property to remove this requirement. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27mac_dbdma: remove DBDMA_init() functionMark Cave-Ayland2-18/+12
Instead we can now instantiate the MAC_DBDMA object directly within the macio device. We also add the DBDMA device as a child property so that it is possible to retrieve later. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27mac_dbdma: QOMifyMark Cave-Ayland1-10/+49
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27mac_dbdma: remove unused IO fields from DBDMAStateMark Cave-Ayland1-2/+0
These fields were used to manually handle IO requests that weren't aligned to a sector boundary before this feature was supported by the block API. Once the block API changed to support byte-aligned IO requests, the macio controller was switched over to use it in commit be1e343 but these fields were accidentally left behind. Remove them, including the initialisation in DBDMA_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27spapr: fix the value of SDR1 in kvmppc_put_books_sregs()Greg Kurz3-27/+48
When running with KVM PR, if a new HPT is allocated we need to inform KVM about the HPT address and size. This is currently done by hacking the value of SDR1 and pushing it to KVM in several places. Also, migration breaks the guest since it is very unlikely the HPT has the same address in source and destination, but we push the incoming value of SDR1 to KVM anyway. This patch introduces a new virtual hypervisor hook so that the spapr code can provide the correct value of SDR1 to be pushed to KVM each time kvmppc_put_books_sregs() is called. It allows to get rid of all the hacking in the spapr/kvmppc code and it fixes migration of nested KVM PR. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/pnv: check for OPAL firmware file presenceCédric Le Goater1-1/+5
and exit before uselessly trying to load it if the file does not exists. Issue discovered by Coverity Scan. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27spapr_pci: make index property mandatoryGreg Kurz1-54/+8
PHBs can be created with an index property, in which case the machine code automatically sets all the MMIO windows at addresses derived from the index. Alternatively, they can be manually created without index, but the user has to provide addresses for all MMIO windows. The non-index way happens to be more trouble than it's worth: it's difficult to use, keeps requiring (potentially incompatible) changes when some new parameter needs adding, and is awkward to check for collisions. It currently even has a bug that prevents to use two non-index PHBs because their child DRCs are all derived from the same index == -1 value, and, thus, collide. This patch hence makes the index property mandatory. As a consequence, the PHB's memory regions and BUID are now always configured according to the index, and it is no longer possible to set them from the command line. This DOES BREAK backwards compat, but we don't think the non-index PHB feature was used in practice (at least libvirt doesn't) and the simplification is worth it. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27macio: convert pmac_ide_ops from old_mmioMark Cave-Ayland1-106/+75
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27spapr: introduce helpers to migrate HPT chunks and the end markerGreg Kurz1-17/+21
This consolidates some duplicated code in a dedicated helpers. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/kvm: generalize the use of kvmppc_get_htab_fd()Greg Kurz1-8/+7
The use of KVM_PPC_GET_HTAB_FD is open-coded in kvmppc_read_hptes() and kvmppc_write_hpte(). This patch modifies kvmppc_get_htab_fd() so that it can be used everywhere we need to access the in-kernel htab: - add an index argument => only kvmppc_read_hptes() passes an actual index, all other users pass 0 - add an errp argument to propagate error messages to the caller. => spapr migration code prints the error => hpte helpers pass &error_abort to keep the current behavior of hw_error() While here, this also fixes a bug in kvmppc_write_hpte() so that it opens the htab fd for writing instead of reading as it currently does. This never broke anything because we currently never call this code, as explained in the changelog of commit c1385933804bb: "This support updating htab managed by the hypervisor. Currently we don't have any user for this feature. This actually bring the store_hpte interface in-line with the load_hpte one. We may want to use this when we want to emulate henter hcall in qemu for HV kvm." The above is still true today. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/kvm: change kvmppc_get_htab_fd() to return -errno on errorGreg Kurz1-2/+3
When kvmppc_get_htab_fd() fails, its return value is propagated up to qemu_savevm_state_iterate() or to qemu_savevm_state_complete_precopy(). All savevm handlers expect to receive a negative errno on error. Let's patch kvmppc_get_htab_fd() accordingly. While here, let's change htab_load() in the spapr code to also propagate the error, since it doesn't make sense to abort() if we couldn't get the htab fd from KVM. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc: Fix OpenPIC modelBenjamin Herrenschmidt2-1/+36
Apple uses an IBM MPIC2A without timers, it has 64 sources. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/ide/macio: Add missing registersBenjamin Herrenschmidt2-4/+46
The timing register exists on all variants of MacIO IDE, we just store and return its value. The interrupts register only exists on KeyLargo but it doesn't hurt to have it. The lack of this register causes MacOS X to hangs under some circumstances. Both are 32-bit only. The HW might support smaller access sizes but no known OS uses them. Because the core IDE subsystem doesn't provide us with a way to query the main (level) interrupt state, nor do we have a way to know that DBDMA issued a (edge) interrupt, we reflect both through a private pair of qirq's in order to maintain the register state. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/mac: More rework of the DBDMA emulationBenjamin Herrenschmidt1-52/+139
This completely reworks the handling of the control register according to my understanding of the HW and the spec. It should (hopefully ... still testing) fix a number of issues most notably cases of MacOS hanging. Also update dbdma_unassigned_rw() and dbdma_unassigned_flush() to have the expected behaviour now that flush is handled slightly differently. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/mac: Advertise a high clock frequency for NewWorld MacsBenjamin Herrenschmidt1-1/+1
We use 900Mhz, otherwise MacOS X 10.5 refuses to install. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc: QOMify g3beige machineMark Cave-Ayland1-2/+15
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc4xx: Add more PLB registersBALATON Zoltan1-3/+9
These registers are present in 440 SoCs (and maybe in others too) and U-Boot accesses them when printing register info. We don't emulate these but add them to avoid crashing when they are read or written. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ehci: Add ppc4xx-ehci for the USB 2.0 controller in embedded PPC SoCsBALATON Zoltan2-0/+26
Some PPC SoCs have an EHCI with OHCI companion USB controller. Add a new type for this similar to types used for other embedded SoCs. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ohci: Allow sysbus version to be used as a companionBALATON Zoltan1-3/+12
Some PPC SoCs have an EHCI with OHCI companion USB controller. To emulate this allow the sysbus version of OHCI to be used as a companion. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-26hw/isa/pc87312: Mark the device with user_creatable = falseThomas Huth1-0/+2
QEMU currently aborts if you try to use the device at the command line: $ ppc64-softmmu/qemu-system-ppc64 -S -machine prep -device pc87312 Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222: qemu-system-ppc64: -device pc87312: Device 'parallel0' is in use Aborted (core dumped) It uses parallel_hds in its realize function, so I can not be instantiated by the user again. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-26hw/display/virtio-gpu: Put the virtio-gpu-device into the display categoryThomas Huth1-0/+1
The virtio-gpu-pci device is already in the display category, so the virtio-gpu-device should be there, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-26hw/display/xenfb.c: Add trace_xenfb_key_eventLiang Yan2-0/+2
It may be better to add a trace event to monitor the last moment of a key event from QEMU to guest VM Signed-off-by: Liang Yan <lyan@suse.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-26aux-to-i2c-bridge: don't allow user to create oneKONRAD Frederic1-0/+11
This device is private and is created once per aux-bus. So don't allow the user to create one from command-line. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-26Replace round_page() with TARGET_PAGE_ALIGN()Kamil Rytarowski2-16/+6
This change fixes conflict with the DragonFly BSD headers. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-23Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell4-6/+33
* Speed up AddressSpaceDispatch creation (Alexey) * Fix kvm.c assert (David) * Memory fixes and further speedup (me) * Persistent reservation manager infrastructure (me) * virtio-serial: add enable_backend callback (Pavel) * chardev GMainContext fixes (Peter) # gpg: Signature made Fri 22 Sep 2017 20:07:33 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (32 commits) chardev: remove context in chr_update_read_handler chardev: use per-dev context for io_add_watch_poll chardev: add Chardev.gcontext field chardev: new qemu_chr_be_update_read_handlers() scsi: add persistent reservation manager using qemu-pr-helper scsi: add multipath support to qemu-pr-helper scsi: build qemu-pr-helper scsi, file-posix: add support for persistent reservation management memory: Share special empty FlatView memory: seek FlatView sharing candidates among children subregions memory: trace FlatView creation and destruction memory: Create FlatView directly memory: Get rid of address_space_init_shareable memory: Rework "info mtree" to print flat views and dispatch trees memory: Do not allocate FlatView in address_space_init memory: Share FlatView's and dispatch trees between address spaces memory: Move address_space_update_ioeventfds memory: Alloc dispatch tree where topology is generared memory: Store physical root MR in FlatView memory: Rename mem_begin/mem_commit/mem_add helpers ... # Conflicts: # configure
2017-09-22ide: fix enum comparison for gcc 4.7John Snow2-2/+2
Apparently GCC gets bent over comparing enum values against zero. Replace the conditional with something less readable. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170921013821.1673-1-jsnow@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-02-15 22:42:46 +0000