aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2019-03-12vhost-user: split vhost_user_read()Marc-André Lureau1-8/+19
Split vhost_user_read(), so only header can be read with vhost_user_read_header(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190308140454.32437-8-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: wrap some read/write with retry handlingMarc-André Lureau1-3/+12
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190308140454.32437-6-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: simplify vhost_user_init/vhost_user_cleanupMarc-André Lureau4-40/+22
Take a VhostUserState* that can be pre-allocated, and initialize it with the associated chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12virtio-balloon: Restore MADV_WILLNEED hint on balloon deflateDavid Gibson1-0/+13
Prior to f6deb6d9 "virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate", the balloon device issued an madvise() MADV_WILLNEED on pages removed from the balloon. That would hint to the host kernel that the pages were likely to be needed by the guest in the near future. It's unclear if this is actually valuable or not, and so f6deb6d9 removed this, essentially ignoring balloon deflate requests. However, concerns have been raised that this might cause a performance regression by causing extra latency for the guest in certain configurations. So, until we can get actual benchmark data to see if that's the case, this restores the old behaviour, issuing a MADV_WILLNEED when a page is removed from the balloon. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190306030601.21986-4-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12virtio-balloon: Fix possible guest memory corruption with inflates & deflatesDavid Gibson1-2/+46
This fixes a balloon bug with a nasty consequence - potentially corrupting guest memory - but which is extremely unlikely to be triggered in practice. The balloon always works in 4kiB units, but the host could have a larger page size on certain platforms. Since ed48c59 "virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size" we've handled this by accumulating requests to balloon 4kiB subpages until they formed a full host page. Since f6deb6d "virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate" we essentially ignore deflate requests. Suppose we have a host with 8kiB pages, and one host page has subpages A & B. If we get this sequence of events - inflate A deflate A inflate B - the current logic will discard the whole host page. That's incorrect because the guest has deflated subpage A, and could have written important data to it. This patch fixes the problem by adjusting our state information about partially ballooned host pages when deflate requests are received. Fixes: ed48c59 "virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size" Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190306030601.21986-3-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Hildenbrand <david@redhat.com>
2019-03-12virtio-balloon: Don't mismatch g_malloc()/free (CID 1399146)David Gibson1-2/+2
ed48c59875b6 "virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size" introduced a new temporary data structure which tracks 4kiB chunks which have been inserted into the balloon by the guest but don't yet form a full host page which we can discard. Unfortunately, I had a thinko and allocated that structure with g_malloc0() but freed it with a plain free() rather than g_free(). This corrects the problem. Fixes: ed48c59875b6 Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190306030601.21986-2-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2019-03-12virtio-balloon: fix a use-after-free caseWei Wang1-6/+7
The elem could theorically contain both outbuf and inbufs. We move the free operation to the end of this function to avoid using elem->in_sg while elem has been freed. Fixes: c13c4153f7 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Peter Xu <peterx@redhat.com> Message-Id: <1552383280-4122-1-git-send-email-wei.w.wang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12Merge remote-tracking branch ↵Peter Maydell15-36/+36
'remotes/kraxel/tags/audio-20190312-pull-request' into staging audio: introduce -audiodev # gpg: Signature made Tue 12 Mar 2019 07:12:19 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20190312-pull-request: audio: -audiodev command line option: cleanup wavaudio: port to -audiodev config spiceaudio: port to -audiodev config sdlaudio: port to -audiodev config paaudio: port to -audiodev config ossaudio: port to -audiodev config noaudio: port to -audiodev config dsoundaudio: port to -audiodev config coreaudio: port to -audiodev config alsaaudio: port to -audiodev config audio: -audiodev command line option basic implementation audio: -audiodev command line option: documentation audio: use qapi AudioFormat instead of audfmt_e qapi: qapi for audio backends Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-03-12Merge remote-tracking branch ↵Peter Maydell6-68/+86
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2019-03-11 * memfd fixes (Ilya Maximets) * Move nvdimms state into struct MachineState (Eric Auger) * hostmem-file: reject invalid pmem file sizes (Stefan Hajnoczi) # gpg: Signature made Tue 12 Mar 2019 00:57:41 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: memfd: improve error messages memfd: set up correct errno if not supported memfd: always check for MFD_CLOEXEC hostmem-memfd: disable for systems without sealing support machine: Move nvdimms state into struct MachineState nvdimm: Rename AcpiNVDIMMState into NVDIMMState hostmem-file: reject invalid pmem file sizes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12Merge remote-tracking branch 'remotes/awilliam/tags/vfio-updates-20190311.0' ↵Peter Maydell4-0/+190
into staging VFIO updates 2019-03-11 - Resolution support for mdev displays supporting EDID interface (Gerd Hoffmann) # gpg: Signature made Mon 11 Mar 2019 19:17:39 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-updates-20190311.0: vfio/display: delay link up event vfio/display: add xres + yres properties vfio/display: add edid support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12Merge remote-tracking branch ↵Peter Maydell3-10/+4
'remotes/vivier2/tags/trivial-branch-pull-request' into staging fw_cfg and thunk code clean up # gpg: Signature made Mon 11 Mar 2019 19:11:03 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/nvram/fw_cfg: Use the ldst API hw/arm/virt: Remove null-check in virt_build_smbios() hw/i386: Remove unused include hw/nvram/fw_cfg: Remove the unnecessary boot_splash_filedata_size thunk: improve readability of allocation loop Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12Merge remote-tracking branch 'remotes/armbru/tags/pull-pflash-2019-03-11' ↵Peter Maydell28-399/+385
into staging Pflash and firmware configuration patches for 2019-03-11 # gpg: Signature made Mon 11 Mar 2019 21:59:12 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-pflash-2019-03-11: (27 commits) docs/interop/firmware.json: Prefer -machine to if=pflash pc: Support firmware configuration with -blockdev pc_sysfw: Pass PCMachineState to pc_system_firmware_init() pc_sysfw: Remove unused PcSysFwDevice pflash_cfi01: Add pflash_cfi01_get_blk() helper vl: Create block backends before setting machine properties vl: Factor configure_blockdev() out of main() vl: Improve legibility of BlockdevOptions queue sysbus: Fix latent bug with onboard devices vl: Fix latent bug with -global and onboard devices qom: Move compat_props machinery from qdev to QOM qdev: Fix latent bug with compat_props and onboard devices pflash: Clean up after commit 368a354f02b, part 2 pflash: Clean up after commit 368a354f02b, part 1 mips_malta: Clean up definition of flash memory size somewhat hw/mips/malta: Restrict 'bios_size' variable scope hw/mips/malta: Remove fl_sectors variable mips_malta: Delete disabled, broken DEBUG_BOARD_INIT code r2d: Fix flash memory size, sector size, width, device ID ppc405_boards: Don't size flash memory to match backing image ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12vfio: Make vfio_get_region_info_cap publicAlexey Kardashevskiy1-1/+1
This makes vfio_get_region_info_cap() to be used in quirks. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <20190307050518.64968-3-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12spapr: Use CamelCase properlyDavid Gibson23-904/+904
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a "ibm,opal/power-mgt" device tree node on POWER9Cédric Le Goater1-0/+15
Activate only stop0 and stop1 levels. We should not need more levels when under QEMU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-15-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add more dummy XSCOM addressesCédric Le Goater1-6/+27
To improve OPAL/skiboot support. We don't need to strictly model these XSCOM accesses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: POWER9 XSCOM quad supportCédric Le Goater2-1/+124
The POWER9 processor does not support per-core frequency control. The cores are arranged in groups of four, along with their respective L2 and L3 caches, into a structure known as a Quad. The frequency must be managed at the Quad level. Provide a basic Quad model to fake the settings done by the firmware on the Non-Cacheable Unit (NCU). Each core pair (EX) needs a special BAR setting for the TIMA area of XIVE because it resides on the same address on all chips. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: extend XSCOM core support for POWER9Cédric Le Goater1-13/+87
Provide a new class attribute to define XSCOM operations per CPU family and add a couple of XSCOM addresses controlling the power management states of the core on POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-11-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a OCC model for POWER9Cédric Le Goater2-0/+85
The OCC on POWER9 is very similar to the one found on POWER8. Provide the same routines with P9 values for the registers and IRQ number. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a OCC model classCédric Le Goater2-18/+39
To ease the introduction of the OCC model for POWER9, provide a new class attributes to define XSCOM operations per CPU family and a PSI IRQ number. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add SerIRQ routing registersCédric Le Goater1-0/+14
This is just a simple reminder that SerIRQ routing should be addressed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller model for POWER9Cédric Le Goater2-1/+221
The LPC Controller on POWER9 is very similar to the one found on POWER8 but accesses are now done via on MMIOs, without the XSCOM and ECCB logic. The device tree is populated differently so we add a specific POWER9 routine for the purpose. SerIRQ routing is yet to be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a 'dt_isa_nodename' to the chipCédric Le Goater1-13/+5
The ISA bus has a different DT nodename on POWER9. Compute the name when the PnvChip is realized, that is before it is used by the machine to populate the device tree with the ISA devices. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller class modelCédric Le Goater2-25/+62
It will ease the introduction of the LPC Controller model for POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: lpc: fix OPB address rangesCédric Le Goater1-3/+4
The PowerNV LPC Controller exposes different sets of registers for each of the functional units it encompasses, among which the OPB (On-Chip Peripheral Bus) Master and Arbitrer and the LPC HOST Controller. The mapping addresses of each register range are correct but the sizes are too large. Fix the sizes and define the OPB Arbitrer range to fill the gap between the OPB Master registers and the LPC HOST Controller registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge model for POWER9Cédric Le Goater2-2/+345
The PSI bridge on POWER9 is very similar to POWER8. The BAR is still set through XSCOM but the controls are now entirely done with MMIOs. More interrupts are defined and the interrupt controller interface has changed to XIVE. The POWER9 model is a first example of the usage of the notify() handler of the XiveNotifier interface, linking the PSI XiveSource to its owning device model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge class modelCédric Le Goater2-26/+59
To ease the introduction of the PSI bridge model for POWER9, abstract the POWER chip differences in a PnvPsi class model and introduce a specific Pnv8Psi type for POWER8. POWER8 interface to the interrupt controller is still XICS whereas POWER9 uses the new XIVE model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12mac_newworld: use node name instead of alias name for hd device in ↵Mark Cave-Ayland1-2/+2
FWPathProvider When using -drive to configure the hd drive for the New World machine, the node name "disk" should be used instead of the "hd" alias. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190307212058.4890-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12mac_oldworld: use node name instead of alias name for hd device in ↵Mark Cave-Ayland1-2/+2
FWPathProvider When using -drive to configure the hd drive for the Old World machine, the node name "disk" should be used instead of the "hd" alias. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190307212058.4890-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12spapr_iommu: Do not replay mappings from just created DMA windowAlexey Kardashevskiy2-0/+41
On sPAPR vfio_listener_region_add() is called in 2 situations: 1. a new listener is registered from vfio_connect_container(); 2. a new IOMMU Memory Region is added from rtas_ibm_create_pe_dma_window(). In both cases vfio_listener_region_add() calls memory_region_iommu_replay() to notify newly registered IOMMU notifiers about existing mappings which is totally desirable for case 1. However for case 2 it is nothing but noop as the window has just been created and has no valid mappings so replaying those does not do anything. It is barely noticeable with usual guests but if the window happens to be really big, such no-op replay might take minutes and trigger RCU stall warnings in the guest. For example, a upcoming GPU RAM memory region mapped at 64TiB (right after SPAPR_PCI_LIMIT) causes a 64bit DMA window to be at least 128TiB which is (128<<40)/0x10000=2.147.483.648 TCEs to replay. This mitigates the problem by adding an "skipping_replay" flag to sPAPRTCETable and defining sPAPR own IOMMU MR replay() hook which does exactly the same thing as the generic one except it returns early if @skipping_replay==true. Another way of fixing this would be delaying replay till the very first H_PUT_TCE but this does not work if in-kernel H_PUT_TCE handler is enabled (a likely case). When "ibm,create-pe-dma-window" is complete, the guest will map only required regions of the huge DMA window. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20190307050518.64968-2-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a reset handlerCédric Le Goater1-0/+11
Reset all regs but keep the MMIO BAR enabled as it is at realize time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a PSIHB_REG macroCédric Le Goater1-2/+4
This is a simple helper to translate XSCOM addresses to MMIO addresses Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-13-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: fix logging primitives using OxCédric Le Goater2-7/+7
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/xive: activate HV supportCédric Le Goater1-3/+54
The NSR register of the HV ring has a different, although similar, bit layout. TM_QW3_NSR_HE_PHYS bit should now be raised when the Hypervisor interrupt line is signaled. Other bits TM_QW3_NSR_HE_POOL and TM_QW3_NSR_HE_LSI are not modeled. LSI are for special interrupts reserved for HW bringup and the POOL bit is used when signaling a group of VPs. This is not currently implemented in Linux but it is in pHyp. The most important special commands on the HV TIMA page are added to let the core manage interrupts : acking and changing the CPU priority. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: introduce a new pic_print_info() operation to the chip modelCédric Le Goater1-3/+24
The POWER9 and POWER8 processors have different interrupt controllers, and reporting their state requires calling different helper routines. However, the interrupt presenters are still handled in the higher level pic_print_info() routine because they are not related to the chip. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: introduce a new dt_populate() operation to the chip modelCédric Le Goater1-2/+25
The POWER9 and POWER8 processors have a different set of devices and a different device tree layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a XIVE interrupt controller model for POWER9Cédric Le Goater4-2/+2045
This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: change the CPU machine_data presenter type to Object *Cédric Le Goater2-4/+4
The POWER9 PowerNV machine will use a XIVE interrupt presenter type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: export the xive_router_notify() routineCédric Le Goater1-1/+1
The PowerNV machine with need to encode the block id in the source interrupt number before forwarding the source event notification to the Router. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/xive: export the TIMA memory accessorsCédric Le Goater1-5/+18
The PowerNV machine can perform indirect loads and stores on the TIMA on behalf of another CPU. Give the controller the possibility to call the TIMA memory accessors with a XiveTCTX of its choice. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc: externalize ppc_get_vcpu_by_pir()Cédric Le Goater2-16/+16
We will use it to get the CPU interrupt presenter in XIVE when the TIMA is accessed from the indirect page. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/xive: hardwire the Physical CAM line of the thread contextCédric Le Goater1-1/+30
By default on P9, the HW CAM line (23bits) is hardwired to : 0x000||0b1||4Bit chip number||7Bit Thread number. When the block group mode is enabled at the controller level (PowerNV), the CAM line is changed for CAM compares to : 4Bit chip number||0x001||7Bit Thread number This will require changes in xive_presenter_tctx_match() possibly. This is a lowlevel functionality of the HW controller and it is not strictly needed. Leave it for later. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12PPC: E500: Add FSL I2C controller and integrate RTC with itAndrew Randrianasulu4-0/+416
Original commit message: This patch adds an emulation model for i2c controller found on most of the FSL SoCs. It also integrates the RTC (ds1338) that sits on the i2c Bus with e500 machine model. Patch was originally written by Amit Singh Tomar <amit.tomar@freescale.com> see http://patchwork.ozlabs.org/patch/431475/ I only fixed it enough for application on top of current qemu master 20b084c4b1401b7f8fbc385649d48c67b6f43d44, and hopefully fixed checkpatch errors Tested by booting Linux kernel 4.20.12. Now e500 machine doesn't need network time protocol daemon because it will have working RTC (before all timestamps on files were from 2016) Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com> Signed-off-by: Andrew Randrianasulu <randrianasulu@gmail.com> Message-Id: <20190306102812.28972-1-randrianasulu@gmail.com> [dwg: Add Kconfig stanza to define the new symbol, update MAINTAINERS] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable H_PAGE_INIT in-kernel handlingSuraj Jitindar Singh1-0/+3
The H_CALL H_PAGE_INIT can be used to zero or copy a page of guest memory. Enable the in-kernel H_PAGE_INIT handler. The in-kernel handler takes half the time to complete compared to handling the H_CALL in userspace. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190306060608.19935-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Clear partition table entry when allocating hash tableSuraj Jitindar Singh2-4/+9
If we allocate a hash page table then we know that the guest won't be using process tables, so set the partition table entry maintained for the guest to zero. If this isn't done, then the guest radix bit will remain set in the entry. This means that when the guest calls H_REGISTER_PROCESS_TABLE there will be a mismatch between then flags and the value in spapr->patb_entry, and the call will fail. The guest will then panic: Failed to register process table (rc=-4) kernel BUG at arch/powerpc/platforms/pseries/lpar.c:959 The result being that it isn't possible to boot a hash guest on a P9 system. Also fix a bug in the flags parsing in h_register_process_table() which was introduced by the same patch, and simplify the handling to make it less likely that errors will be introduced in the future. The effect would have been setting the host radix bit LPCR_HR for a hash guest using process tables, which currently isn't supported and so couldn't have been triggered. Fixes: 00fd075e18 "target/ppc/spapr: Set LPCR:HR when using Radix mode" Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190305022102.17610-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable mitigations by default for pseries-4.0 machine typeSuraj Jitindar Singh1-3/+6
There are currently 3 mitigations the availability of which is controlled by the spapr-caps mechanism, cap-cfpc, cap-sbbc, and cap-ibs. Enable these mitigations by default for the pseries-4.0 machine type. By now machine firmware should have been upgraded to allow these settings. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301044609.9626-3-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/tcg: make spapr_caps apply cap-[cfpc/sbbc/ibs] non-fatal for tcgSuraj Jitindar Singh1-9/+26
The spapr_caps cap-cfpc, cap-sbbc and cap-ibs are used to control the availability of certain mitigations to the guest. These haven't been implemented under TCG, it is unlikely they ever will be, and it is unclear as to whether they even need to be. As such, make failure to apply these capabilities under TCG non-fatal. Instead we print a warning message to the user but still allow the guest to continue. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301044609.9626-2-sjitindarsingh@gmail.com> [dwg: Small style fix] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Add SPAPR_CAP_CCF_ASSISTSuraj Jitindar Singh3-0/+32
Introduce a new spapr_cap SPAPR_CAP_CCF_ASSIST to be used to indicate the requirement for a hw-assisted version of the count cache flush workaround. The count cache flush workaround is a software workaround which can be used to flush the count cache on context switch. Some revisions of hardware may have a hardware accelerated flush, in which case the software flush can be shortened. This cap is used to set the availability of such hardware acceleration for the count cache flush routine. The availability of such hardware acceleration is indicated by the H_CPU_CHAR_BCCTR_FLUSH_ASSIST flag being set in the characteristics returned from the KVM_PPC_GET_CPU_CHAR ioctl. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301031912.28809-2-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Add workaround option to SPAPR_CAP_IBSSuraj Jitindar Singh2-11/+15
The spapr_cap SPAPR_CAP_IBS is used to indicate the level of capability for mitigations for indirect branch speculation. Currently the available values are broken (default), fixed-ibs (fixed by serialising indirect branches) and fixed-ccd (fixed by diabling the count cache). Introduce a new value for this capability denoted workaround, meaning that software can work around the issue by flushing the count cache on context switch. This option is available if the hypervisor sets the H_CPU_BEHAV_FLUSH_COUNT_CACHE flag in the cpu behaviours returned from the KVM_PPC_GET_CPU_CHAR ioctl. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301031912.28809-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable the large decrementer for pseries-4.0Suraj Jitindar Singh2-1/+7
Enable the large decrementer by default for the pseries-4.0 machine type. It is disabled again by default_caps_with_cpu() for pre-POWER9 cpus since they don't support the large decrementer. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301024317.22137-4-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.1 at 2025-02-21 07:30:02 +0000