aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2019-07-16hw/block/pflash_cfi01: Start state machine as READY to accept commandsPhilippe Mathieu-Daudé1-1/+1
When the state machine is ready to accept command, the bit 7 of the status register (SR) is set to 1. The guest polls the status register and check this bit before writting command to the internal 'Write State Machine' (WSM). Set SR.7 bit to 1 when the device is created. There is no migration impact by this change. Reference: Read Array Flowchart "Common Flash Interface (CFI) and Command Sets" (Intel Application Note 646) Appendix B "Basic Command Set" Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190715121338.20600-5-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-16hw/block/pflash_cfi02: Explicit switch fallthrough for ERASE commandsPhilippe Mathieu-Daudé1-0/+1
Previous to commit ddb6f2254, the DQ2 bit was incorrectly set during PROGRAM command (0xA0). The commit reordered the switch cases to only set the DQ2 bit for the ERASE commands using a fallthrough, but did not explicit the fallthrough is intentional. Mark the switch fallthrough with a comment interpretable by C preprocessors and static analysis tools. Reported-by: Coverity (CID 1403012) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190711130759.27720-1-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell7-40/+62
* VFIO bugfix for AMD SEV (Alex) * Kconfig improvements (Julio, Philippe) * MemoryRegion reference counting bugfix (King Wang) * Build system cleanups (Marc-André, myself) * rdmacm-mux off-by-one (Marc-André) * ZBC passthrough fixes (Shinichiro, myself) * WHPX build fix (Stefan) * char-pty fix (Wei Yang) # gpg: Signature made Tue 16 Jul 2019 08:31:27 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: vl: make sure char-pty message displayed by moving setbuf to the beginning create_config: remove $(CONFIG_SOFTMMU) hack Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs hw/usb/Kconfig: USB_XHCI_NEC requires USB_XHCI hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCI target/i386: sev: Do not unpin ram device memory region checkpatch: detect doubly-encoded UTF-8 hw/lm32/Kconfig: Milkymist One provides a USB 1.1 Controller util: merge main-loop.c and iohandler.c Fix broken build with WHPX enabled memory: unref the memory region in simplify flatview hw/i386: turn off vmport if CONFIG_VMPORT is disabled rdmacm-mux: fix strcpy string warning build-sys: remove slirp cflags from main-loop.o iscsi: base all handling of check condition on scsi_sense_to_errno iscsi: fix busy/timeout/task set full scsi: add guest-recoverable ZBC errors scsi: explicitly list guest-recoverable sense codes scsi-disk: pass sense correctly for guest-recoverable errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objsPaolo Bonzini1-29/+32
The device directories must be included only for softmmu builds. Instead of repeating $(CONFIG_SOFTMMU), use an "if". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15hw/usb/Kconfig: USB_XHCI_NEC requires USB_XHCIPhilippe Mathieu-Daudé1-1/+1
TYPE_NEC_XHCI is child of TYPE_XHCI. Add the missing Kconfig dependency. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCIPhilippe Mathieu-Daudé2-5/+9
The USB_EHCI entry currently include PCI code. Since the EHCI implementation is already split in sysbus/PCI, add a new USB_EHCI_PCI. There are no logical changes, but the Kconfig dependencies tree is cleaner. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15hw/lm32/Kconfig: Milkymist One provides a USB 1.1 ControllerPhilippe Mathieu-Daudé1-0/+1
The Milkymist SoftUSB block provides the OHCI USB standard (missed in 0858746b835). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190714124755.14356-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15pl031: Correctly migrate state when using -rtc clock=hostPeter Maydell2-4/+89
The PL031 RTC tracks the difference between the guest RTC and the host RTC using a tick_offset field. For migration, however, we currently always migrate the offset between the guest and the vm_clock, even if the RTC clock is not the same as the vm_clock; this was an attempt to retain migration backwards compatibility. Unfortunately this results in the RTC behaving oddly across a VM state save and restore -- since the VM clock stands still across save-then-restore, regardless of how much real world time has elapsed, the guest RTC ends up out of sync with the host RTC in the restored VM. Fix this by migrating the raw tick_offset. To retain migration compatibility as far as possible, we have a new property migrate-tick-offset; by default this is 'true' and we will migrate the true tick offset in a new subsection; if the incoming data has no subsection we fall back to the old vm_clock-based offset information, so old->new migration compatibility is preserved. For complete new->old migration compatibility, the property is set to 'false' for 4.0 and earlier machine types (this will only affect 'virt-4.0' and below, as none of the other pl031-using machines are versioned). Reported-by: Russell King <rmk@armlinux.org.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20190709143912.28905-1-peter.maydell@linaro.org
2019-07-15hw/arm/virt: Fix non-secure flash modeDavid Engraf1-1/+1
Using the whole 128 MiB flash in non-secure mode is not working because virt_flash_fdt() expects the same address for secure_sysmem and sysmem. This is not correctly handled by caller because it forwards NULL for secure_sysmem in non-secure flash mode. Fixed by using sysmem when secure_sysmem is NULL. Signed-off-by: David Engraf <david.engraf@sysgo.com> Message-id: 20190712075002.14326-1-david.engraf@sysgo.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15hw/display/xlnx_dp: Avoid crash when reading empty RX FIFOPhilippe Mathieu-Daudé1-4/+11
In the previous commit we fixed a crash when the guest read a register that pop from an empty FIFO. By auditing the repository, we found another similar use with an easy way to reproduce: $ qemu-system-aarch64 -M xlnx-zcu102 -monitor stdio -S QEMU 4.0.50 monitor - type 'help' for more information (qemu) xp/b 0xfd4a0134 Aborted (core dumped) (gdb) bt #0 0x00007f6936dea57f in raise () at /lib64/libc.so.6 #1 0x00007f6936dd4895 in abort () at /lib64/libc.so.6 #2 0x0000561ad32975ec in xlnx_dp_aux_pop_rx_fifo (s=0x7f692babee70) at hw/display/xlnx_dp.c:431 #3 0x0000561ad3297dc0 in xlnx_dp_read (opaque=0x7f692babee70, offset=77, size=4) at hw/display/xlnx_dp.c:667 #4 0x0000561ad321b896 in memory_region_read_accessor (mr=0x7f692babf620, addr=308, value=0x7ffe05c1db88, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439 #5 0x0000561ad321bd70 in access_with_adjusted_size (addr=308, value=0x7ffe05c1db88, size=1, access_size_min=4, access_size_max=4, access_fn=0x561ad321b858 <memory_region_read_accessor>, mr=0x7f692babf620, attrs=...) at memory.c:569 #6 0x0000561ad321e9d5 in memory_region_dispatch_read1 (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1420 #7 0x0000561ad321ea9d in memory_region_dispatch_read (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1447 #8 0x0000561ad31bd742 in flatview_read_continue (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1, addr1=308, l=1, mr=0x7f692babf620) at exec.c:3385 #9 0x0000561ad31bd895 in flatview_read (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3423 #10 0x0000561ad31bd90b in address_space_read_full (as=0x561ad5bb3020, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3436 #11 0x0000561ad33b1c42 in address_space_read (len=1, buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", attrs=..., addr=4249485620, as=0x561ad5bb3020) at include/exec/memory.h:2131 #12 0x0000561ad33b1c42 in memory_dump (mon=0x561ad59c4530, count=1, format=120, wsize=1, addr=4249485620, is_physical=1) at monitor/misc.c:723 #13 0x0000561ad33b1fc1 in hmp_physical_memory_dump (mon=0x561ad59c4530, qdict=0x561ad6c6fd00) at monitor/misc.c:795 #14 0x0000561ad37b4a9f in handle_hmp_command (mon=0x561ad59c4530, cmdline=0x561ad59d0f22 "/b 0x00000000fd4a0134") at monitor/hmp.c:1082 Fix by checking the FIFO is not empty before popping from it. The datasheet is not clear about the reset value of this register, we choose to return '0'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190709113715.7761-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15hw/ssi/mss-spi: Avoid crash when reading empty RX FIFOPhilippe Mathieu-Daudé1-1/+7
Reading the RX_DATA register when the RX_FIFO is empty triggers an abort. This can be easily reproduced: $ qemu-system-arm -M emcraft-sf2 -monitor stdio -S QEMU 4.0.50 monitor - type 'help' for more information (qemu) x 0x40001010 Aborted (core dumped) (gdb) bt #1 0x00007f035874f895 in abort () at /lib64/libc.so.6 #2 0x00005628686591ff in fifo8_pop (fifo=0x56286a9a4c68) at util/fifo8.c:66 #3 0x00005628683e0b8e in fifo32_pop (fifo=0x56286a9a4c68) at include/qemu/fifo32.h:137 #4 0x00005628683e0efb in spi_read (opaque=0x56286a9a4850, addr=4, size=4) at hw/ssi/mss-spi.c:168 #5 0x0000562867f96801 in memory_region_read_accessor (mr=0x56286a9a4b60, addr=16, value=0x7ffeecb0c5c8, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439 #6 0x0000562867f96cdb in access_with_adjusted_size (addr=16, value=0x7ffeecb0c5c8, size=4, access_size_min=1, access_size_max=4, access_fn=0x562867f967c3 <memory_region_read_accessor>, mr=0x56286a9a4b60, attrs=...) at memory.c:569 #7 0x0000562867f99940 in memory_region_dispatch_read1 (mr=0x56286a9a4b60, addr=16, pval=0x7ffeecb0c5c8, size=4, attrs=...) at memory.c:1420 #8 0x0000562867f99a08 in memory_region_dispatch_read (mr=0x56286a9a4b60, addr=16, pval=0x7ffeecb0c5c8, size=4, attrs=...) at memory.c:1447 #9 0x0000562867f38721 in flatview_read_continue (fv=0x56286aec6360, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4, addr1=16, l=4, mr=0x56286a9a4b60) at exec.c:3385 #10 0x0000562867f38874 in flatview_read (fv=0x56286aec6360, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4) at exec.c:3423 #11 0x0000562867f388ea in address_space_read_full (as=0x56286aa3e890, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4) at exec.c:3436 #12 0x0000562867f389c5 in address_space_rw (as=0x56286aa3e890, addr=1073745936, attrs=..., buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4, is_write=false) at exec.c:3466 #13 0x0000562867f3bdd7 in cpu_memory_rw_debug (cpu=0x56286aa19d00, addr=1073745936, buf=0x7ffeecb0c7c0 "\340ǰ\354\376\177", len=4, is_write=0) at exec.c:3976 #14 0x000056286811ed51 in memory_dump (mon=0x56286a8c32d0, count=1, format=120, wsize=4, addr=1073745936, is_physical=0) at monitor/misc.c:730 #15 0x000056286811eff1 in hmp_memory_dump (mon=0x56286a8c32d0, qdict=0x56286b15c400) at monitor/misc.c:785 #16 0x00005628684740ee in handle_hmp_command (mon=0x56286a8c32d0, cmdline=0x56286a8caeb2 "0x40001010") at monitor/hmp.c:1082 From the datasheet "Actel SmartFusion Microcontroller Subsystem User's Guide" Rev.1, Table 13-3 "SPI Register Summary", this register has a reset value of 0. Check the FIFO is not empty before accessing it, else log an error message. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190709113715.7761-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[]Philippe Mathieu-Daudé1-0/+4
Both lqspi_read() and lqspi_load_cache() expect a 32-bit aligned address. >From UG1085 datasheet [*] chapter on 'Quad-SPI Controller': Transfer Size Limitations Because of the 32-bit wide TX, RX, and generic FIFO, all APB/AXI transfers must be an integer multiple of 4-bytes. Shorter transfers are not possible. Set MemoryRegionOps.impl values to force 32-bit accesses, this way we are sure we do not access the lqspi_buf[] array out of bound. [*] https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memoryPhilippe Mathieu-Daudé1-0/+16
Lei Sun found while auditing the code that a CPU write would trigger a NULL pointer dereference. >From UG1085 datasheet [*] AXI writes in this region are ignored and generates an AXI Slave Error (SLVERR). Fix by implementing the write_with_attrs() handler. Return MEMTX_ERROR when the region is accessed (this error maps to an AXI slave error). [*] https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf Reported-by: Lei Sun <slei.casper@gmail.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15hw/ssi/xilinx_spips: Convert lqspi_read() to read_with_attrsPhilippe Mathieu-Daudé1-12/+11
In the next commit we will implement the write_with_attrs() handler. To avoid using different APIs, convert the read() handler first. Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15hw/i386: turn off vmport if CONFIG_VMPORT is disabledJulio Montes2-2/+7
vmport device is not included when CONFIG_VMPORT is disabled, hence QEMU fails with the following error: `Unknown device 'vmport' for bus 'ISA': unknown.` v2: imply VMPORT (Paolo Bonzini ) Signed-off-by: Julio Montes <julio.montes@intel.com> Message-Id: <20190712160257.18270-1-julio.montes@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15scsi: explicitly list guest-recoverable sense codesPaolo Bonzini1-3/+2
It's not really possible to fit all sense codes into errno codes, especially in such a way that sense codes can be properly categorized as either guest-recoverable or host-handled. Create a new function that checks for guest recoverable sense, then scsi_sense_buf_to_errno only needs to be called for host handled sense codes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15scsi-disk: pass sense correctly for guest-recoverable errorsShinichiro Kawasaki1-0/+10
When an error was passed down to the guest because it was recoverable, the sense length was not copied from the SG_IO data. As a result, the guest saw the CHECK CONDITION status but not the sense data. Signed-off-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-12virtio pmem: remove transitional namesPankaj Gupta1-2/+0
Remove transitional & non transitional names for virtio pmem. Only virtio 1.0 and up is supported. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Message-Id: <20190712073554.21918-4-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-12virtio pmem: remove memdev null checkPankaj Gupta1-2/+2
Coverity reports that when we're assigning vi->size we handle the "pmem->memdev is NULL" case; but we then pass it into object_get_canonical_path(), which unconditionally dereferences it and will crash if it is NULL. If this pointer can be NULL then we need to do something else here. We are removing 'pmem->memdev' null check here as memdev will never be null in this function. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Message-Id: <20190712073554.21918-3-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-12virtio pmem: fix wrong mem region conditionPankaj Gupta1-1/+1
Coverity reported memory region returns zero for non-null value. This is because of wrong arguments to '?:' , fixing this. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Message-Id: <20190712073554.21918-2-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-12virtio-balloon: fix QEMU 4.0 config size migration incompatibilityStefan Hajnoczi2-3/+27
The virtio-balloon config size changed in QEMU 4.0 even for existing machine types. Migration from QEMU 3.1 to 4.0 can fail in some circumstances with the following error: qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: a1 device: 1 cmask: ff wmask: c0 w1cmask:0 This happens because the virtio-balloon config size affects the VIRTIO Legacy I/O Memory PCI BAR size. Introduce a qdev property called "qemu-4-0-config-size" and enable it only for the QEMU 4.0 machine types. This way <4.0 machine types use the old size, 4.0 uses the larger size, and >4.0 machine types use the appropriate size depending on enabled virtio-balloon features. Live migration to and from old QEMUs to QEMU 4.1 works again as long as a versioned machine type is specified (do not use just "pc"!). Originally-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190710141440.27635-1-stefanha@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-12xio3130_downstream: typo fixMichael S. Tsirkin1-1/+1
slt ctl/status are passed in incorrect order. Fix this up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-07-12xics/kvm: Always set the MASKED bit if interrupt is maskedGreg Kurz1-0/+3
The ics_set_kvm_state_one() function is called either to restore the state of an interrupt source during migration or to set the interrupt source to a default state during reset. Since always, ie. 2013, the code only sets the MASKED bit if the 'current priority' and the 'saved priority' are different. This is likely true when restoring an interrupt that had been previously masked with the ibm,int-off RTAS call. However this is always false in the case of reset since both 'current priority' and 'saved priority' are equal to 0xff, and the MASKED bit is never set. The legacy KVM XICS device gets away with that because it ends updating its internal structure the same way, whether the MASKED bit is set or the priority is 0xff. The XICS-on-XIVE device for POWER9 is different. It sticks to the KVM documentation [1] and _really_ relies on the MASKED bit to correctly set. If not, it will configure the interrupt source in the XIVE HW, even though the guest hasn't configured the interrupt yet. This disturbs the complex logic implemented in XICS-on-XIVE and may result in the loss of subsequent queued events. Always set the MASKED bit if interrupt is masked as expected by the KVM XICS-on-XIVE device. This has no impact on the legacy KVM XICS. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/virtual/kvm/devices/xics.txt Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <156217454083.559957.7359208229523652842.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-09Merge remote-tracking branch ↵Peter Maydell1-1/+4
'remotes/philmd-gitlab/tags/pflash-next-20190709' into staging Restore 32-bit I/O accesses on AMD flashes (precautionary revert). # gpg: Signature made Tue 09 Jul 2019 16:18:10 BST # gpg: using RSA key E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/pflash-next-20190709: Revert "hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-09Revert "hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit"Philippe Mathieu-Daudé1-1/+4
This reverts commit 3ae0343db69c379beb5750b4ed70794bbed51b85. Stephen Checkoway noticed commit 3ae0343db69 is incorrect. This commit state all parallel flashes are limited to 16-bit accesses, however the x32 configuration exists in some models, such the Cypress S29CL032J, which CFI Device Geometry Definition announces: CFI ADDR DATA 0x28,0x29 = 0x0003 (x32-only asynchronous interface) Guests should not be affected by the previous change, because QEMU does not announce itself as x32 capable: /* Flash device interface (8 & 16 bits) */ pfl->cfi_table[0x28] = 0x02; pfl->cfi_table[0x29] = 0x00; Commit 3ae0343db69 does not restrict the bus to 16-bit accesses, but restrict the implementation as 16-bit access max, so a guest 32-bit access will result in 2x 16-bit calls. Now, we have 2 boards that register the flash device in 32-bit access: - PPC: taihu_405ep The CFI id matches the S29AL008J that is a 1MB in x16, while the code QEMU forces it to be 2MB, and checking Linux it expects a 4MB flash. - ARM: Digic4 While the comment says "Samsung K8P3215UQB 64M Bit (4Mx16)", this flash is 32Mb (2MB). Also note the CFI id does not match the comment. To avoid unexpected side effect, we revert commit 3ae0343db69, and will clean the board code later. Reported-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-09Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190709' into stagingPeter Maydell1-3/+2
Fixes in cpu models, tcg, and vfio-ccw. # gpg: Signature made Tue 09 Jul 2019 13:20:52 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20190709: s390x/tcg: move fallthrough annotation s390: cpumodel: fix description for the new vector facility s390x/cpumodel: Set up CPU model for AQIC interception vfio-ccw: Test vfio_set_irq_signaling() return value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-08Merge remote-tracking branch ↵Peter Maydell1-2/+2
'remotes/stefanberger/tags/pull-tpm-2019-07-08-1' into staging Merge tpm 2019/07/08 v1 # gpg: Signature made Mon 08 Jul 2019 15:04:46 BST # gpg: using RSA key 75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2019-07-08-1: hw/tpm: Only build tpm_ppi.o if any of TPM_TIS/TPM_CRB is built Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-08hw/tpm: Only build tpm_ppi.o if any of TPM_TIS/TPM_CRB is builtPhilippe Mathieu-Daudé1-2/+2
The TPM Physical Presence Interface routines are only used by the CRB/TIS interfaces. Do not compile this file if any of them is built. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2019-07-08virtio-scsi: restart DMA after iothreadStefan Hajnoczi2-4/+4
When the 'cont' command resumes guest execution the vm change state handlers are invoked. Unfortunately there is no explicit ordering between classic qemu_add_vm_change_state_handler() callbacks. When two layers of code both use vm change state handlers, we don't control which handler runs first. virtio-scsi with iothreads hits a deadlock when a failed SCSI command is restarted and completes before the iothread is re-initialized. This patch uses the new qdev_add_vm_change_state_handler() API to guarantee that virtio-scsi's virtio change state handler executes before the SCSI bus children. This way DMA is restarted after the iothread has re-initialized. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-08qdev: add qdev_add_vm_change_state_handler()Stefan Hajnoczi2-0/+62
Children sometimes depend on their parent's vm change state handler having completed. Add a vm change state handler API for devices that guarantees tree depth ordering. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-08hw/arm/sbsa-ref: Remove unnecessary check for secure_sysmem == NULLPeter Maydell1-6/+2
In the virt machine, we support TrustZone being either present or absent, and so the code must deal with the secure_sysmem pointer possibly being NULL. In the sbsa-ref machine, TrustZone is always present, but some code and comments copied from virt still treat it as possibly not being present. This causes Coverity to complain (CID 1407287) that we check secure_sysmem for being NULL after an unconditional dereference. Simplify the code so that instead of initializing the variable to NULL, unconditionally assigning it, and then testing it for NULL, we just initialize it correctly in the variable declaration and then assume it to be non-NULL. We also delete a comment which only applied to the non-TrustZone config. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190704142004.7150-1-peter.maydell@linaro.org Tested-by: Radosław Biernacki <radoslaw.biernacki@linaro.org> Reviewed-by: Radosław Biernacki <radoslaw.biernacki@linaro.org>
2019-07-08vfio-ccw: Test vfio_set_irq_signaling() return valueAlex Williamson1-3/+2
Coverity doesn't like that most callers of vfio_set_irq_signaling() check the return value and doesn't understand the equivalence of testing the error pointer instead. Test the return value consistently. Reported-by: Coverity (CID 1402783) Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <156209642116.14915.9598593247782519613.stgit@gimli.home> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-07-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell3-36/+58
Bugfixes. # gpg: Signature made Fri 05 Jul 2019 21:21:52 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: ioapic: use irq number instead of vector in ioapic_eoi_broadcast hw/i386: Fix linker error when ISAPC is disabled Makefile: generate header file with the list of devices enabled target/i386: kvm: Fix when nested state is needed for migration minikconf: do not include variables from MINIKCONF_ARGS in config-all-devices.mak target/i386: fix feature check in hyperv-stub.c ioapic: clear irq_eoi when updating the ioapic redirect table entry intel_iommu: Fix unexpected unmaps during global unmap intel_iommu: Fix incorrect "end" for vtd_address_space_unmap i386/kvm: Fix build with -m32 checkpatch: do not warn for multiline parenthesized returned value pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-05ioapic: use irq number instead of vector in ioapic_eoi_broadcastLi Qiang1-5/+5
When emulating irqchip in qemu, such as following command: x86_64-softmmu/qemu-system-x86_64 -m 1024 -smp 4 -hda /home/test/test.img -machine kernel-irqchip=off --enable-kvm -vnc :0 -device edu -monitor stdio We will get a crash with following asan output: (qemu) /home/test/qemu5/qemu/hw/intc/ioapic.c:266:27: runtime error: index 35 out of bounds for type 'int [24]' ================================================================= ==113504==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61b000003114 at pc 0x5579e3c7a80f bp 0x7fd004bf8c10 sp 0x7fd004bf8c00 WRITE of size 4 at 0x61b000003114 thread T4 #0 0x5579e3c7a80e in ioapic_eoi_broadcast /home/test/qemu5/qemu/hw/intc/ioapic.c:266 #1 0x5579e3c6f480 in apic_eoi /home/test/qemu5/qemu/hw/intc/apic.c:428 #2 0x5579e3c720a7 in apic_mem_write /home/test/qemu5/qemu/hw/intc/apic.c:802 #3 0x5579e3b1e31a in memory_region_write_accessor /home/test/qemu5/qemu/memory.c:503 #4 0x5579e3b1e6a2 in access_with_adjusted_size /home/test/qemu5/qemu/memory.c:569 #5 0x5579e3b28d77 in memory_region_dispatch_write /home/test/qemu5/qemu/memory.c:1497 #6 0x5579e3a1b36b in flatview_write_continue /home/test/qemu5/qemu/exec.c:3323 #7 0x5579e3a1b633 in flatview_write /home/test/qemu5/qemu/exec.c:3362 #8 0x5579e3a1bcb1 in address_space_write /home/test/qemu5/qemu/exec.c:3452 #9 0x5579e3a1bd03 in address_space_rw /home/test/qemu5/qemu/exec.c:3463 #10 0x5579e3b8b979 in kvm_cpu_exec /home/test/qemu5/qemu/accel/kvm/kvm-all.c:2045 #11 0x5579e3ae4499 in qemu_kvm_cpu_thread_fn /home/test/qemu5/qemu/cpus.c:1287 #12 0x5579e4cbdb9f in qemu_thread_start util/qemu-thread-posix.c:502 #13 0x7fd0146376da in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76da) #14 0x7fd01436088e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x12188e This is because in ioapic_eoi_broadcast function, we uses 'vector' to index the 's->irq_eoi'. To fix this, we should uses the irq number. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20190622002119.126834-1-liq3ea@163.com>
2019-07-05hw/i386: Fix linker error when ISAPC is disabledJulio Montes1-3/+9
v2: include config-devices.h to use CONFIG_IDE_ISA Message-Id: <20190705143554.10295-2-julio.montes@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Julio Montes <julio.montes@intel.com>
2019-07-05ioapic: clear irq_eoi when updating the ioapic redirect table entryLi Qiang1-0/+1
irq_eoi is used to count the number of irq injected during eoi broadcast. It should be set to 0 when updating the ioapic's redirect table entry. Suggested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20190624151635.22494-1-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05intel_iommu: Fix unexpected unmaps during global unmapPeter Xu1-26/+41
This is an replacement work of Yan Zhao's patch: https://www.mail-archive.com/qemu-devel@nongnu.org/msg625340.html vtd_address_space_unmap() will do proper page mask alignment to make sure each IOTLB message will have correct masks for notification messages (2^N-1), but sometimes it can be expanded to even supercede the registered range. That could lead to unexpected UNMAP of already mapped regions in some other notifiers. Instead of doing mindless expension of the start address and address mask, we split the range into smaller ones and guarantee that each small range will have correct masks (2^N-1) and at the same time we should also try our best to generate as less IOTLB messages as possible. Reported-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Yan Zhao <yan.y.zhao@intel.com> Message-Id: <20190624091811.30412-3-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05intel_iommu: Fix incorrect "end" for vtd_address_space_unmapYan Zhao1-2/+2
IOMMUNotifier is with inclusive ranges, so we should check against (VTD_ADDRESS_SIZE(s->aw_bits) - 1). Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> [peterx: split from another bigger patch] Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20190624091811.30412-2-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05pc: fix possible NULL pointer dereference in ↵Igor Mammedov1-1/+5
pc_machine_get_device_memory_region_size() QEMU will crash when device-memory-region-size property is read if ms->device_memory wasn't initialized yet. Crash can be reproduced with: $QEMU -preconfig -qmp unix:qmp_socket,server,nowait & ./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size Instead of crashing return 0 if ms->device_memory hasn't been initialized. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1560174635-22602-1-git-send-email-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05numa: allow memory-less nodes when using memdev as backendIgor Mammedov1-12/+7
QEMU fails to start if memory-less node is present when memdev is used qemu-system-x86_64 -object memory-backend-ram,id=ram0,size=128M \ -numa node -numa node,memdev=ram0 with error: "memdev option must be specified for either all or no nodes" which works as expected if legacy 'mem' is used. Fix check to make memory-less nodes valid when memdev option is used but still disallow mix of mem and memdev options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190702140745.27767-2-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05numa: Make deprecation warnings conditional on !qtest_enabled()Eduardo Habkost1-5/+10
This will help us avoid spurious warnings during "make check". Note that this will silence the warnings generated by tests/numa-test, but not the ones generated by tests/bios-tables-test. We still need to change tests/bios-tables-test to use "-numa ...,memdev=" to silence these warnings. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190702215726.23661-1-ehabkost@redhat.com>
2019-07-05i386: Make unversioned CPU models be aliasesEduardo Habkost3-0/+11
This will make unversioned CPU models behavior depend on the machine type: * "pc-*-4.0" and older will not report them as aliases. This is done to keep compatibility with older QEMU versions after management software starts translating aliases. * "pc-*-4.1" will translate unversioned CPU models to -v1. This is done to keep compatibility with existing management software, that still relies on CPU model runnability promises. * "none" will translate unversioned CPU models to their latest version. This is planned become the default in future machine types (probably in pc-*-4.3). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190628002844.24894-8-ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05qmp: Add deprecation information to query-machinesEduardo Habkost1-0/+1
Export machine type deprecation status through the query-machines QMP command. With this, libvirt and management software will be able to show this information to users and/or suggest changes to VM configuration to avoid deprecated machines. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190608233447.27970-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05vl.c: Add -smp, dies=* command line support and update docLike Xu1-13/+17
For PC target, users could configure the number of dies per one package via command line with this patch, such as "-smp dies=2,cores=4". The parsing rules of new cpu-topology model obey the same restrictions/logic as the legacy socket/core/thread model especially on missing values computing. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190620054525.37188-4-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05machine: Refactor smp_parse() in vl.c as MachineClass::smp_parse()Like Xu2-0/+155
To make smp_parse() more flexible and expansive, a smp_parse function pointer is added to MachineClass that machine types could override. The generic smp_parse() code in vl.c is moved to hw/core/machine.c, and become the default implementation of MachineClass::smp_parse. A PC-specific function called pc_smp_parse() has been added to hw/i386/pc.c, which in this patch changes nothing against the default one . Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190620054525.37188-3-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05deprecate -mem-path fallback to anonymous RAMIgor Mammedov1-2/+4
Fallback might affect guest or worse whole host performance or functionality if backing file were used to share guest RAM with another process. Patch deprecates fallback so that we could remove it in future and ensure that QEMU will provide expected behavior and fail if it can't use user provided backing file. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190626074228.11558-1-imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05numa: deprecate implict memory distribution between nodesIgor Mammedov1-0/+3
Implicit RAM distribution between nodes has exactly the same issues as: "numa: deprecate 'mem' parameter of '-numa node' option" only with QEMU being the user that's 'adding' 'mem' parameter. Deprecate it, to get it out of the way so that we could consolidate guest RAM allocation using memory backends making it consistent and possibly later on transition to using memory devices instead of adhoc memory mapping for the initial RAM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1559205199-233510-4-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05numa: deprecate 'mem' parameter of '-numa node' optionIgor Mammedov1-0/+2
The parameter allows to configure fake NUMA topology where guest VM simulates NUMA topology but not actually getting performance benefits from it. The same or better results could be achieved using 'memdev' parameter. Beside of unpredictable performance, '-numa node.mem' option has other issues when it's used with combination of -mem-path + + -mem-prealloc + memdev backends (pc-dimm), breaking binding of memdev backends since mem-path/mem-prealloc are global and affect the most of RAM allocations. It's possible to make memdevs and global -mem-path/mem-prealloc to play nicely together but that will just complicate already complicated code and add unobious ways it could break on 2 different memmory allocation pathes and their combinations. Instead of it, consolidate all guest RAM allocation over memdev which still allows to create fake NUMA configurations if desired and leaves one simplifyed code path to consider when it comes to guest RAM allocation. To achieve desired simplification deprecate 'mem' parameter as its ad-hoc partitioning of initial RAM MemoryRegion can't be translated to memdev based backend transparently to users and in compatible manner (migration wise). Later down the road that will allow to consolidate means of how guest RAM is allocated and would permit us to clean up quite a bit memory allocations and numa code, leaving only 'memdev' implementation in place. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1559205199-233510-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05machine: show if CLI option '-numa node,mem' is supported in QAPI schemaIgor Mammedov4-0/+4
Legacy '-numa node,mem' option has a number of issues and mgmt often defaults to it. Unfortunately it's no possible to replace it with an alternative '-numa memdev' without breaking migration compatibility. What's possible though is to deprecate it, keeping option working with old machine types only. In order to help users to find out if being deprecated CLI option '-numa node,mem' is still supported by particular machine type, add new "numa-mem-supported" property to output of query-machines. "numa-mem-supported" is set to 'true' for machines that currently support NUMA, but it will be flipped to 'false' later on, once deprecation period expires and kept 'true' only for old machine types that used to support the legacy option so it won't break existing configuration that are using it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1560172207-378962-1-git-send-email-imammedo@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05pc: fix possible NULL pointer dereference in ↵Igor Mammedov1-1/+5
pc_machine_get_device_memory_region_size() QEMU will crash when device-memory-region-size property is read if ms->device_memory wasn't initialized yet. Crash can be reproduced with: $QEMU -preconfig -qmp unix:qmp_socket,server,nowait & ./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size Instead of crashing return 0 if ms->device_memory hasn't been initialized. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190624090200.5383-1-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.1 at 2024-12-23 20:15:36 +0000