aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2022-10-17ppc440_sdram: Get rid of the init RAM hackBALATON Zoltan3-9/+13
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM controller from the board. Firmware does this so it may only be needed when booting with -kernel without firmware but we enable SDRAM unconditionally to preserve previous behaviour. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc440_sdram: Implement enable bit in the DDR2 SDRAM controllerBALATON Zoltan1-2/+32
To allow removing the do_init hack we need to improve the DDR2 SDRAM controller model to handle the enable/disable bit that it ignored so far. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <f8900aadb1a4426a6444741e6876c898b3b77f7b.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc440_sdram: Split off map/unmap of sdram banks for later reuseBALATON Zoltan1-12/+21
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <23560b6a71682d513f3dd8e9ed3852f51d5eb309.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx_sdram: Drop extra zeros for readabilityBALATON Zoltan1-20/+20
Constants that are written zero padded for no good reason are hard to read, it's easier to see what is meant if it's just 0 or 1 instead. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <93974622c3d398c7d3a3488b678b74c3807849de.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx_sdram: QOM'ifyBALATON Zoltan5-65/+79
Change the ppc4xx_sdram model to a QOM class derived from the PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly modelling the DDR SDRAM controller found in the 440EP (used on the bamboo board) but also backward compatible with the older DDR controllers on some 405 SoCs so we also use it for those now. This likely does not cause problems for guests we run as the new features are just not accessed but to model 405 SoC accurately some features may have to be disabled or the model split between 440 and older. Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an updated DDR2 SDRAM controller implemented by the ppc440_sdram model (only partially, enough for the 460EX on the sam460ex) that is not yet QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2 when QOM'ified later. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <8f820487fc9011343032c422ecdf3e8ee74d8c11.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx_sdram: Move size check to ppc4xx_sdram_init()BALATON Zoltan5-38/+9
Instead of checking if memory size is valid in board code move this check to ppc4xx_sdram_init() as this is a restriction imposed by the SDRAM controller. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <39e5129dd095b285676a6267c5753786da1bc30d.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc440_bamboo: Add missing 4 MiB valid memory sizeBALATON Zoltan1-1/+1
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <05836e38be84729c1c6b5b609e7aa2ea60435033.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx: Use Ppc4xxSdramBank in ppc4xx_sdram_banks()BALATON Zoltan7-47/+32
Change ppc4xx_sdram_banks() to take one Ppc4xxSdramBank array instead of the separate arrays and adjust ppc4xx_sdram_init() and ppc440_sdram_init() accordingly as well as machines using these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <e3a1fea51f29779fd6a61be90a29c684f3299544.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx_sdram: Get rid of the init RAM hackBALATON Zoltan5-12/+12
The do_init parameter of ppc4xx_sdram_init() is used to map memory regions that is normally done by the firmware by programming the SDRAM controller. Do this from board code emulating what firmware would do when booting a kernel directly from -kernel without a firmware so we can get rid of this do_init hack. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <d6c44c870befa1a075e21f1a59926dcdaff63f6b.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx: Introduce Ppc4xxSdramBank structBALATON Zoltan2-55/+53
Instead of storing sdram bank parameters in unrelated arrays put them in a struct so it's clear they belong to the same bank and simplify the state struct using this bank type. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <5eb82d0424c584b2b9e6f7bc51560f8189ed21bb.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc440_bamboo: Remove unnecessary memsetsBALATON Zoltan2-10/+4
In ppc4xx_sdram_init() the struct is allocated with g_new0() so no need to clear its elements. In the bamboo machine init memset can be replaced with array initialiser which is shorter. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <529adc7705fb3e3e777439895bdaa136bacb9403.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-14hw/intc: sifive_plic: change interrupt priority register to WARL fieldJim Shu1-2/+19
PLIC spec [1] requires interrupt source priority registers are WARL field and the number of supported priority is power-of-2 to simplify SW discovery. Existing QEMU RISC-V machine (e.g. shakti_c) don't strictly follow PLIC spec, whose number of supported priority is not power-of-2. Just change each bit of interrupt priority register to WARL field when the number of supported priority is power-of-2. [1] https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-priorities Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Clément Chigot <chigot@adacore.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221003041440.2320-3-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/intc: sifive_plic: fix hard-coded max priority levelJim Shu1-2/+4
The maximum priority level is hard-coded when writing to interrupt priority register. However, when writing to priority threshold register, the maximum priority level is from num_priorities Property which is configured by platform. Also change interrupt priority register to use num_priorities Property in maximum priority level. Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com> Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221003041440.2320-2-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/riscv: virt: Enable booting S-mode firmware from pflashSunil V L2-1/+46
To boot S-mode firmware payload like EDK2 from persistent flash storage, qemu needs to pass the flash address as the next_addr in fw_dynamic_info to the opensbi. When both -kernel and -pflash options are provided in command line, the kernel (and initrd if -initrd) will be copied to fw_cfg table. The S-mode FW will load the kernel/initrd from fw_cfg table. If only pflash is given but not -kernel, then it is the job of of the S-mode firmware to locate and load the kernel. In either case, update the kernel_entry with the flash address so that the opensbi can jump to the entry point of the S-mode firmware. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/riscv: virt: Move create_fw_cfg() prior to loading kernelSunil V L1-7/+7
To enable both -kernel and -pflash options, the fw_cfg needs to be created prior to loading the kernel. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221004092351.18209-3-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/arm, loongarch: Move load_image_to_fw_cfg() to common locationSunil V L3-82/+32
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same function will be required by riscv too. So, it's time to refactor and move this function to a common path. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/ssi: ibex_spi: fixup/add rw1c functionalityWilfred Mallawa1-3/+33
This patch adds the `rw1c` functionality to the respective registers. The status fields are cleared when the respective field is set. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220930033241.206581-3-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/ssi: ibex_spi: fixup coverity issueWilfred Mallawa1-64/+68
This patch addresses the coverity issues specified in [1], as suggested, `FIELD_DP32()`/`FIELD_EX32()` macros have been implemented to clean up the code. [1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg887713.html Fixes: Coverity CID 1488107 Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-Id: <20220930033241.206581-2-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14hw/riscv: Update comment for qtest check in riscv_find_firmware()Bin Meng1-2/+2
Since commit 4211fc553234 ("roms/opensbi: Remove ELF images"), the comment for qtest check in riscv_find_firmware() is out of date. Update it to reflect the latest status. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <BN7PR08MB435525C92550BAC5467BE672BF219@BN7PR08MB4355.namprd08.prod.outlook.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-13Merge tag 'kraxel-20221013-pull-request' of https://gitlab.com/kraxel/qemu ↵Stefan Hajnoczi5-9/+3
into staging pci: cleanup virtio ids. audio: bugfixes and latency improvements. misc fixes for hw/display and ui # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmNHtYsACgkQTLbY7tPo # cTjHhg//RDkHbqVSExe+Odw5ISuLu/EXZSHAVjo3KOCUvaj7O2cXi8N7DVfEy5a5 # T3+WSv0v4X6TYSV0PoMb36a11rCuOKzeLZrtEOQeYfG3D1WCVc9gIWMt6omzBC7A # YQ59P+u19qHD7xD2PP3WRtdcqmsceg1RG+47adX2EnsRZmmu/yJxD72w/Q1kXMuB # jIzuJU2ZVorYX9y11hnIU3M5pvoX/vjFA+Ib2UGZZdlE3KlUKtJeAtLiZkHfoyd1 # 5janU+PtSU6Z1yVirE7RVz3+IBbfqqEFTkDtMXJucJW/Eod0NHCyo4Q6D64HoiZe # +JZKkHmuvn8ZUgXMtIOZdH+aOHlaIJzA5SoA2IFxCBVuxn7p4NtPbCRoHHg7gkDh # BDsq+p/wsdOY06u1txFw9dYy+4tKvWS7+Dxhyme7GT2YUQHrEEG3pzGFmk3PE0Vi # tEAhmfNRxWzUgIcynQiN/3SnShAI8lANq0SEiiTvqcX7h1TK+cjEYjOTMsjK43nL # 2W/pgQxJpEPcSs3jgFLnBLk9rUHRNRC+GtMBlwN+Wdc1y17leZHiIinqhHjXuts3 # cJTdv4veeGuJENPIl2rk5JOdvpVtzduDkz+Rzx0mGb+LnAYdK2lBUV5LY9FfdwaK # 2Bgg02ZYNBz7K2zzFeeV+7b7K/LYOuWkGdzGvKbpqjbefopZmTM= # =6d/F # -----END PGP SIGNATURE----- # gpg: Signature made Thu 13 Oct 2022 02:51:55 EDT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * tag 'kraxel-20221013-pull-request' of https://gitlab.com/kraxel/qemu: (26 commits) audio: improve out.voices test audio: fix in.voices test gtk: Add show_menubar=on|off command line option. qemu-edid: Restrict input parameter -d to avoid division by zero ui/gtk: Fix the implicit mouse ungrabbing logic pci-ids: document modern virtio-pci ids in pci.h too pci-ids: drop list of modern virtio devices pci-ids: drop PCI_DEVICE_ID_VIRTIO_PMEM pci-ids: drop PCI_DEVICE_ID_VIRTIO_MEM pci-ids: drop PCI_DEVICE_ID_VIRTIO_IOMMU docs: add firmware feature flags cirrus_vga: fix potential memory overflow ui/gtk-egl: egl context needs to be unbound in the end of gd_egl_switch ui/vnc-clipboard: fix integer underflow in vnc_client_cut_text_ext audio: prevent an integer overflow in resampling code audio: fix sw->buf size for audio recording audio: refactor audio_get_avail() audio: rename audio_sw_bytes_free() audio: swap audio_rate_get_bytes() function parameters spiceaudio: update comment ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-13Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingStefan Hajnoczi1-1/+6
* scsi-disk: support setting CD-ROM block size via device options * target/i386: Implement MSR_CORE_THREAD_COUNT MSR * target/i386: notify VM exit support * target/i386: PC-relative translation block support * target/i386: support for XSAVE state in signal frames (linux-user) # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNFKP4UHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNJnwgAgCcOOxmY4Qem0Gd1L+SJKpEtGMOd # 4LY7443vT36pMpvqFNSfp5GBjDT1MgTD8BIY28miLMq959LT89LyM9g/H7IKOT82 # uyCsW3jW+6F19EZVkNvzTt+3USn/kaHn50zA4Ss9kvdNZr31b2LYqtglVCznfZwH # oI1rDhvsXubq8oWvwkqH7IwduK8mw+EB5Yz7AjYQ6eiYjenTrQBObpwQNbb4rlUf # oRm8dk/YJ2gfI2HQkoznGEbgpngy2tIU1vHNEpIk5NpwXxrulOyui3+sWaG4pH8f # oAOrSDC23M5A6jBJJAzDJ1q6M677U/kwJypyGQ7IyvyhECXE3tR+lHX1eA== # =tqeJ # -----END PGP SIGNATURE----- # gpg: Signature made Tue 11 Oct 2022 04:27:42 EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (37 commits) linux-user: i386/signal: support XSAVE/XRSTOR for signal frame fpstate linux-user: i386/signal: support FXSAVE fpstate on 32-bit emulation linux-user: i386/signal: move fpstate at the end of the 32-bit frames KVM: x86: Implement MSR_CORE_THREAD_COUNT MSR i386: kvm: Add support for MSR filtering x86: Implement MSR_CORE_THREAD_COUNT MSR target/i386: Enable TARGET_TB_PCREL target/i386: Inline gen_jmp_im target/i386: Add cpu_eip target/i386: Create eip_cur_tl target/i386: Merge gen_jmp_tb and gen_goto_tb into gen_jmp_rel target/i386: Remove MemOp argument to gen_op_j*_ecx target/i386: Use gen_jmp_rel for DISAS_TOO_MANY target/i386: Use gen_jmp_rel for gen_jcc target/i386: Use gen_jmp_rel for loop, repz, jecxz insns target/i386: Create gen_jmp_rel target/i386: Use DISAS_TOO_MANY to exit after gen_io_start target/i386: Create eip_next_* target/i386: Truncate values for lcall_real to i32 target/i386: Introduce DISAS_JUMP ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-12Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi27-233/+1940
into staging pc,virtio: features, tests, fixes, cleanups virtio introspection new serial number opton for cxl vhost user blk dynamic config size virtio-gpio vhost user backend Tests fixes cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNEVeoPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRph8YH+gMWpb5IglE0Q+H2JiQPBwB/Ghy1ohRKnOvZ # lChB7+oy18o2xXRFTOXwG9Ijqsbdn0QMbU/r3NWxBuMzxDow012xiMDniJlJmcXw # /4POOCSTKrIfzVBhsEErVSA9NwSE5cQKr1oiRBGIa9UdZfZ//v7s6SoP4vtyj8RZ # UJVYVnMDtq/0PaN92IMs06lhqo/LkegE7gTGHMBf8Nvw4SgQoZgfPyp1eR+dKOhz # lXNqqvTds9yt8yS65UWbuSrZ9d7GpCQf8nuyLaLaENHd6FQUVfmTTT37l2EKziwp # PK0EwWMHeGkj7LHrylztradhE9xBlIW23ROP8wPdGZHmgLNHbC0= # =20Zb # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Oct 2022 13:27:06 EDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (55 commits) x86: pci: acpi: consolidate PCI slots creation tests: acpi: update expected blobs x86: pci: acpi: reorder Device's _DSM method tests: acpi: whitelist pc/q35 DSDT before moving _ADR field tests: acpi: update expected blobs x86: pci: acpi: reorder Device's _ADR and _SUN fields tests: acpi: whitelist pc/q35 DSDT before moving _ADR field tests: acpi: update expected blobs x86: acpi: cleanup PCI device _DSM duplication tests: acpi: whitelist pc/q35 DSDT before switching _DSM to use ASUN tests: acpi: update expected blobs x86: acpi: _DSM: use Package to pass parameters acpi: x86: refactor PDSM method to reduce nesting tests: acpi: whitelist pc/q35 DSDT due to HPET AML move tests: acpi: update expected blobs after HPET move acpi: x86: deduplicate HPET AML building tests: acpi: whitelist pc/q35 DSDT due to HPET AML move hw/smbios: support for type 8 (port connector) pci: Sanity check mask argument to pci_set_*_by_mask() pci: Remove unused pci_get_*_by_mask() functions ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-12Merge tag 'pull-target-arm-20221010' of ↵Stefan Hajnoczi1-0/+4
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Retry KVM_CREATE_VM call if it fails EINTR * allow setting SCR_EL3.EnTP2 when FEAT_SME is implemented * docs/nuvoton: Update URL for images * refactoring of page table walk code * hw/arm/boot: set CPTR_EL3.ESM and SCR_EL3.EnTP2 when booting Linux with EL3 * Don't allow guest to use unimplemented granule sizes * Report FEAT_GTG support # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmNEK54ZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kzHD/9StYmulAf0iwe1ZNp6NavK # CioOgZi6XyZl4rS2DrCf6/IO5XRFJP68byZd4Po554r2jcPc149yTuQAn4wb7d5e # kejMZRQeWsXdxschhoVzDp9fgfzyZBn9X+gbdEZFFPWzOHMyWuu4cTok0dAKQvQY # tZDLGmKeTv4MRUFJCri0310Sq0T0v/nAX/AyFtpvIr2SBx7DVCWYY02s5R4Yy5+M # ntDWb0j12r78/bPwI1ll+g19JXUV5Tfh9AsbcYjKv45kdftz/Xc8fBiSiEpxyMrF # mnVrr3kesZHOYAnOr2K1MnwsF0vU41kRg7kMRqSnu7pZXlI/8tmRyXoPR3c2aDbW # Q5HWtsA48j2h0CJ0ESzl5SQnl3TSPa94m/HmpRSBFrYkU727QgnWDhUmBb4n54xs # 9iBJDhcKGZLq68CB2+j6ENdRNTndolr14OwwEns0lbkoiCKUOQY3AigtZJQGRBGM # J5r3ED7jfTWpvP6vpp5X484fK6KVprSMxsRFDkmiwhbb3J+WtKLxbSlgsWIrkZ7s # +JgTGfGB8sD9hJVuFZYyPQb/XWP8Bb8jfgsLsTu1vW9Xs1ASrLimFYdRO3hhwSg3 # c5yubz6Vu9GB/JYh7hGprlMD5Yv48AA3if70hOu2d4P8A4OitavT7o+4Thwqjhds # cSV1RsBJ8ha6L3CziZaKrQ== # =s+1f # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Oct 2022 10:26:38 EDT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20221010' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits) docs/system/arm/emulation.rst: Report FEAT_GTG support target/arm: Use ARMGranuleSize in ARMVAParameters target/arm: Don't allow guest to use unimplemented granule sizes hw/arm/boot: set CPTR_EL3.ESM and SCR_EL3.EnTP2 when booting Linux with EL3 target/arm: Use tlb_set_page_full target/arm: Fix cacheattr in get_phys_addr_disabled target/arm: Split out get_phys_addr_disabled target/arm: Fix ATS12NSO* from S PL1 target/arm: Pass HCR to attribute subroutines. target/arm: Remove env argument from combined_attrs_fwb target/arm: Hoist read of *is_secure in S1_ptw_translate target/arm: Introduce arm_hcr_el2_eff_secstate target/arm: Drop secure check for HCR.TGE vs SCTLR_EL1.M target/arm: Reorg regime_translation_disabled target/arm: Fold secure and non-secure a-profile mmu indexes target/arm: Add is_secure parameter to do_ats_write target/arm: Merge regime_is_secure into get_phys_addr target/arm: Add TBFLAG_M32.SECURE target/arm: Add is_secure parameter to v7m_read_half_insn target/arm: Split out get_phys_addr_with_secure ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-12pci-ids: document modern virtio-pci ids in pci.h tooGerd Hoffmann1-1/+1
While being at it add a #define for the magic 0x1040 number. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20221004112100.301935-6-kraxel@redhat.com>
2022-10-12pci-ids: drop PCI_DEVICE_ID_VIRTIO_PMEMGerd Hoffmann1-2/+0
Not needed for a virtio 1.0 device. virtio_pci_device_plugged() overrides them anyway (so no functional change). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Tested-by: Pankaj Gupta <pankaj.gupta@amd.com> Message-Id: <20221004112100.301935-4-kraxel@redhat.com>
2022-10-12pci-ids: drop PCI_DEVICE_ID_VIRTIO_MEMGerd Hoffmann1-2/+0
Not needed for a virtio 1.0 device. virtio_pci_device_plugged() overrides them anyway (so no functional change). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
2022-10-12pci-ids: drop PCI_DEVICE_ID_VIRTIO_IOMMUGerd Hoffmann1-3/+1
Not needed for a virtio 1.0 device. virtio_pci_device_plugged() overrides them anyway (so no functional change). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
2022-10-12cirrus_vga: fix potential memory overflowlu zhipeng1-1/+1
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn> Message-Id: <20220929122352.1891-1-luzhipeng@cestc.cn> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-10-10hw/arm/boot: set CPTR_EL3.ESM and SCR_EL3.EnTP2 when booting Linux with EL3Jerome Forissier1-0/+4
According to the Linux kernel booting.rst [1], CPTR_EL3.ESM and SCR_EL3.EnTP2 must be initialized to 1 when EL3 is present and FEAT_SME is advertised. This has to be taken care of when QEMU boots directly into the kernel (i.e., "-M virt,secure=on -cpu max -kernel Image"). Cc: qemu-stable@nongnu.org Fixes: 78cb9776662a ("target/arm: Enable SME for -cpu max") Link: [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.rst?h=v6.0#n321 Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Message-id: 20221003145641.1921467-1-jerome.forissier@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-10scsi-disk: support setting CD-ROM block size via device optionsJohn Millikin1-1/+6
SunOS expects CD-ROM devices to have a block size of 512, and will fail to mount or install using QEMU's default block size of 2048. When initializing the SCSI device, allow the `physical_block_size' block device option to override the default block size. Signed-off-by: John Millikin <john@john-millikin.com> Message-Id: <20220804122950.1577012-1-john@john-millikin.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-09x86: pci: acpi: consolidate PCI slots creationIgor Mammedov1-57/+54
No functional changes nor AML bytecode changes. Consolidate code that generates empty and populated slot descriptors. Besides eliminating duplication, it helps consolidate conditions for generating parts of Device{} desriptor in one place, which makes code more compact and easier to read. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-18-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09x86: pci: acpi: reorder Device's _DSM methodIgor Mammedov1-3/+1
align _DSM method in empty slot descriptor with a populated slot position. Expected change: + Device (SE8) + { + Name (_ADR, 0x001D0000) // _ADR: Address + Name (ASUN, 0x1D) Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { Local0 = Package (0x02) { BSEL, ASUN } Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0)) } - } - Device (SE8) - { - Name (_ADR, 0x001D0000) // _ADR: Address - Name (ASUN, 0x1D) Name (_SUN, 0x1D) // _SUN: Slot User Number Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device { PCEJ (BSEL, _SUN) } + } i.e. put _DSM right after ASUN, with _SUN/_EJ0 following it. that will eliminate contextual changes (causing test failures) when follow up patches merge code generating populated and empty slots descriptors. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-16-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09x86: pci: acpi: reorder Device's _ADR and _SUN fieldsIgor Mammedov1-1/+1
no functional change, align order of fields in empty slot descriptor with a populated slot ordering. Expected diff: - Name (_SUN, 0x0X) // _SUN: Slot User Number Name (_ADR, 0xY) // _ADR: Address ... + Name (_SUN, 0xX) // _SUN: Slot User Number that will eliminate contextual changes (causing test failures) when follow up patches merge code generating populated and empty slots descriptors. Put mandatory _ADR as the 1st field, then ASUN as it can be present for both pupulated and empty slots and only then _SUN which is present only when slot is hotpluggable. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-13-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09x86: acpi: cleanup PCI device _DSM duplicationIgor Mammedov1-29/+27
add ASUN variable to hotpluggable slots and use it instead of _SUN which has the same value to reuse _DMS code on both branches (hot- and non-hotpluggable). No functional change. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09x86: acpi: _DSM: use Package to pass parametersIgor Mammedov1-13/+27
Numer of possible arguments to pass to a method is limited in ACPI. The following patches will need to pass over more parameters to PDSM method, will hit that limit. Prepare for this by passing structure (Package) to method, which let us workaround arguments limitation. Pass to PDSM all standard arguments of _DSM as is, and pack custom parameters into Package that is passed as the last argument to PDSM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09acpi: x86: refactor PDSM method to reduce nestingIgor Mammedov1-62/+77
.., it will help with code readability and make easier to extend method in followup patches Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09acpi: x86: deduplicate HPET AML buildingIgor Mammedov1-6/+4
HPET AML doesn't depend on piix4 nor q35, move code buiding it to common scope to avoid duplication. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220701133515.137890-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09hw/smbios: support for type 8 (port connector)Hal Martin1-0/+63
PATCH v1: add support for SMBIOS type 8 to qemu PATCH v2: incorporate patch v1 feedback and add smbios type=8 to qemu-options internal_reference: internal reference designator external_reference: external reference designator connector_type: hex value for port connector type (see SMBIOS 7.9.2) port_type: hex value for port type (see SMBIOS 7.9.3) After studying various vendor implementationsi (Dell, Lenovo, MSI), the value of internal connector type was hard-coded to 0x0 (None). Example usage: -smbios type=8,internal_reference=JUSB1,external_reference=USB1,connector_type=0x12,port_type=0x10 \ -smbios type=8,internal_reference=JAUD1,external_reference="Audio Jack",connector_type=0x1f,port_type=0x1d \ -smbios type=8,internal_reference=LAN,external_reference=Ethernet,connector_type=0x0b,port_type=0x1f \ -smbios type=8,internal_reference=PS2,external_reference=Mouse,connector_type=0x0f,port_type=0x0e \ -smbios type=8,internal_reference=PS2,external_reference=Keyboard,connector_type=0x0f,port_type=0x0d Signed-off-by: Hal Martin <hal.martin@gmail.com> Message-Id: <20220812135153.17859-1-hal.martin@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09qmp: add QMP command x-query-virtio-queue-elementLaurent Vivier2-0/+163
This new command shows the information of a VirtQueue element. [Note: Up until v10 of this patch series, virtio.json had many (15+) enums defined (e.g. decoded device features, statuses, etc.). In v10 most of these enums were removed and replaced with string literals. By doing this we get (1) simpler schema, (2) smaller generated code, and (3) less maintenance burden for when new things are added (e.g. devices, device features, etc.).] Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1660220684-24909-6-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09qmp: add QMP commands for virtio/vhost queue-statusLaurent Vivier2-0/+117
These new commands show the internal status of a VirtIODevice's VirtQueue and a vhost device's vhost_virtqueue (if active). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1660220684-24909-5-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09qmp: decode feature & status bits in virtio-statusLaurent Vivier1-8/+635
Display feature names instead of bitmaps for host, guest, and backend for VirtIODevices. Display status names instead of bitmaps for VirtIODevices. Display feature names instead of bitmaps for backend, protocol, acked, and features (hdev->features) for vhost devices. Decode features according to device ID. Decode statuses according to configuration status bitmap (config_status_map). Decode vhost user protocol features according to vhost user protocol bitmap (vhost_user_protocol_map). Transport features are on the first line. Undecoded bits (if any) are stored in a separate field. [Jonah: Several changes made to this patch from prev. version (v14): - Moved all device features mappings to hw/virtio/virtio.c - Renamed device features mappings (less generic) - Generalized @FEATURE_ENTRY macro for all device mappings - Virtio device feature map definitions include descriptions of feature bits - Moved @VHOST_USER_F_PROTOCOL_FEATURES feature bit from transport feature map to vhost-user-supported device feature mappings (blk, fs, i2c, rng, net, gpu, input, scsi, vsock) - New feature bit added for virtio-vsock: @VIRTIO_VSOCK_F_SEQPACKET - New feature bit added for virtio-iommu: @VIRTIO_IOMMU_F_BYPASS_CONFIG - New feature bit added for virtio-mem: @VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE - New virtio transport feature bit added: @VIRTIO_F_IN_ORDER - Added device feature map definition for virtio-rng ] Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1660220684-24909-4-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09qmp: add QMP command x-query-virtio-statusLaurent Vivier2-0/+109
This new command shows the status of a VirtIODevice, including its corresponding vhost device's status (if active). Next patch will improve output by decoding feature bits, including vhost device's feature bits (backend, protocol, acked, and features). Also will decode status bits of a VirtIODevice. [Jonah: From patch v12; added a check to @virtio_device_find to ensure synchronicity between @virtio_list and the devices in the QOM composition tree.] Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1660220684-24909-3-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09qmp: add QMP command x-query-virtioLaurent Vivier3-0/+60
This new command lists all the instances of VirtIODevices with their canonical QOM path and name. [Jonah: @virtio_list duplicates information that already exists in the QOM composition tree. However, extracting necessary information from this tree seems to be a bit convoluted. Instead, we still create our own list of realized virtio devices but use @qmp_qom_get with the device's canonical QOM path to confirm that the device exists and is realized. If the device exists but is actually not realized, then we remove it from our list (for synchronicity to the QOM composition tree). Also, the QMP command @x-query-virtio is redundant as @qom-list and @qom-get are sufficient to search '/machine/' for realized virtio devices. However, @x-query-virtio is much more convenient in listing realized virtio devices.] Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09Revert "intel_iommu: Fix irqchip / X2APIC configuration checks"Peter Xu1-0/+5
It's true that when vcpus<=255 we don't require the length of 32bit APIC IDs. However here since we already have EIM=ON it means the hypervisor will declare the VM as x2apic supported (e.g. VT-d ECAP register will have EIM bit 4 set), so the guest should assume the APIC IDs are 32bits width even if vcpus<=255. In short, commit 77250171bdc breaks any simple cmdline that wants to boot a VM with >=9 but <=255 vcpus with: -device intel-iommu,intremap=on For anyone who does not want to enable x2apic, we can use eim=off in the intel-iommu parameters to skip enabling KVM x2apic. This partly reverts commit 77250171bdc02aee106083fd2a068147befa1a38, while keeping the valid bit on checking split irqchip, but revert the other change. One thing to mention is that this patch may break migration compatibility of such VM, however that's probably the best thing we can do, because the old behavior was simply wrong and not working for >8 vcpus. For <=8 vcpus, there could be a light guest ABI change (by enabling KVM x2apic after this patch), but logically it shouldn't affect the migration from working. Also, this is not the 1st commit to change x2apic behavior. Igor provided a full history of how this evolved for the past few years: https://lore.kernel.org/qemu-devel/20220922154617.57d1a1fb@redhat.com/ Relevant commits for reference: fb506e701e ("intel_iommu: reject broken EIM", 2016-10-17) c1bb5418e3 ("target/i386: Support up to 32768 CPUs without IRQ remapping", 2020-12-10) 77250171bd ("intel_iommu: Fix irqchip / X2APIC configuration checks", 2022-05-16) dc89f32d92 ("target/i386: Fix sanity check on max APIC ID / X2APIC enablement", 2022-05-16) We may want to have this for stable too (mostly for 7.1.0 only). Adding a fixes tag. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Claudio Fontana <cfontana@suse.de> Cc: Igor Mammedov <imammedo@redhat.com> Fixes: 77250171bd ("intel_iommu: Fix irqchip / X2APIC configuration checks") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220926153206.10881-1-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2022-10-09mem/cxl-type3: Add sn option to provide serial number for PCI ecapJonathan Cameron1-1/+13
The Device Serial Number Extended Capability PCI r6.0 sec 7.9.3 provides a standard way to provide a device serial number as an IEEE defined 64-bit extended unique identifier EUI-64. CXL 2.0 section 8.1.12.2 Memory Device PCIe Capabilities and Extended Capabilities requires this to be used to uniquely identify CXL memory devices. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220923161835.9805-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ben Widawsky <bwidawsk@kernel.org>
2022-10-09acpi: arm/virt: build_gtdt: fix invalid 64-bit physical addressesMiguel Luis1-3/+2
Per the ACPI 6.5 specification, on the GTDT Table Structure, the Counter Control Block Address and Counter Read Block Address fields of the GTDT table should be set to 0xFFFFFFFFFFFFFFFF if not provided, rather than 0x0. Fixes: 41041e57085 ("acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Message-Id: <20220920162137.75239-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
2022-10-07vhost-user-blk: dynamically resize config space based on featuresDaniil Tatianin2-8/+11
Make vhost-user-blk backwards compatible when migrating from older VMs running with modern features turned off, the same way it was done for virtio-blk in 20764be0421c ("virtio-blk: set config size depending on the features enabled") It's currently impossible to migrate from an older VM with vhost-user-blk (with disable-legacy=off) because of errors like this: qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0 qemu-system-x86_64: Failed to load PCIDevice:config qemu-system-x86_64: Failed to load virtio-blk:virtio qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:05.0:00.0:02.0/virtio-blk' qemu-system-x86_64: load of migration failed: Invalid argument This is caused by the newer (destination) VM requiring a bigger BAR0 alignment because it has to cover a bigger configuration space, which isn't actually needed since those additional config fields are not active (write-zeroes/discard). Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-6-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07vhost-user-blk: make 'config_wce' part of 'host_features'Daniil Tatianin1-4/+2
No reason to have this be a separate field. This also makes it more akin to what the virtio-blk device does. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-5-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07vhost-user-blk: make it possible to disable write-zeroes/discardDaniil Tatianin1-2/+4
It is useful to have the ability to disable these features for compatibility with older VMs that don't have these implemented. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-4-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07virtio-blk: move config size params to virtio-blk-commonDaniil Tatianin3-23/+42
This way we can reuse it for other virtio-blk devices, e.g vhost-user-blk, which currently does not control its config space size dynamically. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-3-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-12-28 01:04:19 +0000