aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2009-12-03targe-ppc: Sync CPU state for KVMAlexander Graf2-0/+8
Some recent change made PPC guests always start at address 0x0 because env isn't synced to kvm_state on first bootup. I'm not sure if this is the correct bugfix, but at least it makes PPC boot again with KVM enabled. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03qemu: cleanup unused macros in cirrusMichael S. Tsirkin1-35/+0
Cirrus vga has a copy of many PCI macros, and it doesn't even use them. Clean up. We also don't need to override header type as it is NORMAL by default. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03qemu: make cirrus init value pci spec compliantMichael S. Tsirkin1-1/+0
PCI memory should be disabled at reset, otherwise we might claim transactions at address 0. I/O should also be disabled, although for cirrus it is harmless to enable it as we do not have I/O bar. Note: bios fix needed for this patch to work was already applied: previously bios incorrently assumed that it does not need to enable i/o unless device has i/o bar. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03virtio-blk: Implement rerror optionKevin Wolf1-5/+8
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03ide: Implement rerror optionKevin Wolf2-17/+38
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03Rename DriveInfo.onerror to on_write_errorKevin Wolf3-3/+4
Either rename variables and functions to refer to write errors (which is what they actually do) or introduce a parameter to distinguish reads and writes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03live migration: Propagate output monitor to callback handlerJan Kiszka1-1/+2
In order to allow proper progress reporting to the monitor that initiated the migration, forward the monitor reference through the migration layer down to SaveLiveStateHandler. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela26-37/+60
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03qdev: enable vmstate_unregister() supportJuan Quintela1-2/+0
Now vmstate_unregister have the right type Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03pci: vmstate_register() already assign consecutive numbers starting at 0Juan Quintela1-3/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Add support for multiplying size for a constantJuan Quintela1-0/+13
When the size that we want to transmit is in another field, but in an unit different that bytes Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: remove usused VMSTATE_STRUCT_ARRAY_SIZE_UINT8Juan Quintela1-10/+0
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce UINT16_TEST supportJuan Quintela1-0/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce VMSTATE_STRUCT_POINTER_TESTJuan Quintela1-6/+10
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce VMSTATE_STRUCT_TESTJuan Quintela1-7/+11
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Add support for VBUFFERSJuan Quintela1-0/+20
Support for buffer that are pointed by a pointer (i.e. not embedded) where the size that we want to use is a field in the state. We also need a new place to store where to start in the middle of the buffer, as now it is a pointer, not the offset of the 1st field. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Fix info field of VMSTATE_MACADDRJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Implement IRQ on reselectionLaszlo Ast1-3/+40
The critical part of this change is how to deal with simultaneaous generation of interrupts. The only (normal) case when this happens in the emulation is near simultaneous reselection + selection. If selection comes first, there is no problem, since the target attempting reselection loses the arbitration (in the emulation it only means that the reselect function will not be started). In the worst case the host adapter is reselected, but the device driver already started a selection, so we jump to the alternative address to handle the situation. The SCRIPTS code can trigger another interrupt to notify the driver that the new task has to be postponed. I suppose that on real hardware there is enough time after the reselection interrupt to set the SIP bit before the next interrupt comes, so it would result in 2 stacked interrupts (a SCSI and a DMA one). However, in the emulation there is no interrupt stacking, so there is a good chance that the 2 interrupts will get to the interrupt handler at the same time. Nevertheless, it should not make a big difference in interrupt handling, since in both cases both interrupts have to be fetched first, and after that the new task (that failed during the selection phase) has to be prepared/reset for a later restart, and the reconnected device has to be serviced. The changes do not modify the host adapter's behavior if this interrupt is not enabled. See also LSI53C895A technical manual, SCID and SIEN0. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Use alternative address when already reselectedLaszlo Ast1-2/+3
See SCRIPTS, 3.2.17 SELECT. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Fix SDID in SELECT ID commandLaszlo Ast1-1/+1
See SCRIPTS Programming Guide, 3.2.17 SELECT. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Fix message code of DISCONNECTLaszlo Ast1-1/+1
See SCSI-2, 6.5 Message system description/message codes. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Add support for LSI53C700 Family Compatibility bitLaszlo Ast1-0/+4
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Whitespace and typo fixesLaszlo Ast1-5/+5
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add read/write 16 commands.Gerd Hoffmann3-2/+15
Add READ_16 + friends to scsi-defs.h, scsi_command_name() and the request parsing helper functions. Use them in scsi-disk.c too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: VERIFYGerd Hoffmann1-3/+3
Move VERIFY emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: REPORT_LUNSGerd Hoffmann3-8/+10
Move REPORT_LUNS emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add REPORT_LUNS to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SERVICE_ACTION_INGerd Hoffmann3-35/+34
Move SERVICE_ACTION_IN emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add SERVICE_ACTION_IN to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: GET_CONFIGURATIONGerd Hoffmann3-8/+10
Move GET_CONFIGURATION emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add GET_CONFIGURATION to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: READ_TOCGerd Hoffmann1-38/+42
Move READ_TOC emulation from scsi_send_command() to scsi_disk_emulate_command(). Add scsi_disk_emulate_read_toc() function which holds the longisch READ_TOC emulation code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SYNCHRONIZE_CACHEGerd Hoffmann1-4/+4
Move SYNCHRONIZE_CACHE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: READ_CAPACITYGerd Hoffmann1-28/+27
Move READ_CAPACITY emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: ALLOW_MEDIUM_REMOVALGerd Hoffmann1-4/+4
Move ALLOW_MEDIUM_REMOVAL emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: START_STOPGerd Hoffmann1-7/+7
Move START_STOP emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: MODE_SENSEGerd Hoffmann1-152/+183
Move MODE_SENSE emulation from scsi_send_command() to scsi_disk_emulate_command(). Create two helper functions: mode_sense_page() which writes the actual mode pages and scsi_disk_emulate_mode_sense() which holds the longish MODE_SENSE emulation code, calling into mode_sense_page() as needed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: RESERVE+RELEASEGerd Hoffmann1-20/+20
Move RESERVE+RELEASE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: INQUIRYGerd Hoffmann1-162/+143
Move INQUIRY emulation from scsi_send_command() to scsi_disk_emulate_command(). Also split the longish INQUITY emulation code into the new scsi_disk_emulate_inquiry() function. Serial number handling is slightly changed, we don't copy it any more but look it up directly in DriveInfo which we have at hand anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: REQUEST_SENSEGerd Hoffmann1-19/+19
Move REQUEST_SENSE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: core + TEST_UNIT_READY.Gerd Hoffmann1-5/+42
Add new scsi_disk_emulate_command() function, which will -- when finished -- handle all scsi disk command emulation except actual I/O (READ+WRITE commands) which goes to the block layer. The function builds on top of the new SCSIRequest struct. SCSI command emulation code is moved over from scsi_send_command() in steps to ease review and make it easier to pin down regressions (if any) using bisect. This patch moves over TEST_UNIT_READY only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add scsi_req_print()Gerd Hoffmann2-0/+115
Handy for debugging. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move status to SCSIRequest.Gerd Hoffmann4-15/+27
Also add and use the scsi_req_complete() helper function for calling the completion callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move dinfo to SCSIDeviceGerd Hoffmann3-44/+43
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move sense to SCSIDevice, create SCSISense struct.Gerd Hoffmann3-4/+23
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add xfer modeGerd Hoffmann3-39/+54
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: use command defines in scsi-disk.cGerd Hoffmann1-20/+20
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add request parsing helpers to common code.Gerd Hoffmann3-132/+191
Add helper functions for scsi request parsing to common code. Getting command length, transfer size, and linear block address is handled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move type from SCSIGenericState to SCSIDeviceGerd Hoffmann3-7/+8
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add scsi-defs.hGerd Hoffmann3-31/+174
Largely based on <scsi/scsi.h> from linux. Added into the tree so we can use the defines everywhere, not just in scsi-generic.c (which is linux-specific). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move blocksize from SCSIGenericState to SCSIDeviceGerd Hoffmann3-12/+13
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move scsi command buffer from SCSIGenericReq to SCSIRequest.Gerd Hoffmann2-9/+12
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move SCSIRequest management to common code.Gerd Hoffmann4-40/+52
Create generic functions to allocate, find and release SCSIRequest structs. Make scsi-disk and scsi-generic use them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-27 18:31:38 +0000