aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2011-07-30onenand: Pass BlockDriverState to init functionPeter Maydell3-10/+12
Pass the BlockDriverState to the onenand init function so it doesn't need to look up the drive itself. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: qdevifyJuha Riihimäki5-81/+103
Qdevify the NAND device. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Writing to NAND can only clear bitsPeter Maydell1-4/+13
Writing to a NAND device cannot set bits, it can only clear them; implement this rather than simply copying the data. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support multiple reads following READ STATUSJuha Riihimäki1-3/+8
After receiving READ STATUS command all subsequent IO reads should return the status register value until another command is issued. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support devices wider than 8 bitsJuha Riihimäki2-34/+88
Support NAND devices which are wider than 8 bits. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30nand: Bump vmstate version after changing structure.Andrzej Zaborowski1-3/+3
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support large NAND devicesJuha Riihimäki1-21/+27
Add support for NAND devices of over 1Gb. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Pass block device state to init functionPeter Maydell5-10/+15
Pass the BlockDeviceState to the nand_init() function rather than having it look it up via drive_get() itself. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30lm832x: Take DeviceState pointer in lm832x_key_event()Peter Maydell3-7/+6
Since lm832x has been qdev'ified, its users will generally have a DeviceState pointer rather than an i2c_slave pointer, so adjust lm832x_key_event's prototype to suit. This allows the n810 (its only user) to actually pass a correct pointer to it rather than NULL. The effect is that we no longer segfault when a key is pressed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/omap_gpio.c: Convert to qdevJuha Riihimäki6-173/+218
Convert the OMAP GPIO module to qdev. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/omap_clk: Add the clock for the OMAP2430-specific fifth GPIO modulePeter Maydell1-1/+5
The OMAP2430 has a fifth GPIO module which earlier OMAP2 models lack; add the clock definition for it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/omap_l4.c: Add helper function omap_l4_region_baseJuha Riihimäki2-0/+8
Add helper function omap_l4_region_base() to return the base address of a particular region of an L4 target agent. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-29Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori5-3/+93
2011-07-29Merge remote-tracking branch 'kraxel/migration.2' into stagingAnthony Liguori8-0/+51
2011-07-29multiboot: Fix bss segment supportGöran Weinholt1-5/+9
Multiboot images can specify a bss segment. The boot loader must clear the memory of the bss and ensure that no modules or structures are allocated inside it. Several fields are provided in the Multiboot header that were previously not used properly. The header is now used to determine how much data should be read from the image and how much memory should be reserved to the bss segment. Signed-off-by: Göran Weinholt <goran@weinholt.se> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Fix last sector write on sd cardDr. David Alan Gilbert1-8/+11
When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK QEmu throws an error saying that we've run off the end, and leaves itself in the wrong state. Tested on ARM Vexpress model. Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29showing a splash picture when startwayne1-1/+139
Added options to let qemu transfer two configuration files to bios: "bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command -boot splash=P,splash-time=T P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit is ms. With these two options, if user invoke qemu with menu=on option, then a splash picture would be showed in a given time. For example: qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000 would make boot.bmp shown as a brand with 5 seconds in the booting up process. This feature need the new seabios's support, which could be got from git. Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29usb-ohci: convert to MemoryRegionAvi Kivity1-25/+17
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29sysbus: add MemoryRegion based memory management APIAvi Kivity2-3/+27
Allow registering sysbus device memory using a MemoryRegion. Once all users are converted, sysbus_init_mmio() and sysbus_init_mmio_cb() will be removed. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pci: add MemoryRegion based BAR management APIAvi Kivity2-8/+42
Allow registering a BAR using a MemoryRegion. Once all users are converted, pci_register_bar() and pci_register_bar_simple() will be removed. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pci: pass address space to pci bus when createdAvi Kivity22-35/+85
This is now done sloppily, via get_system_memory(). Eventually callers will be converted to stop using that. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pc: move global memory map out of pc_init1() and into its callersAvi Kivity1-7/+8
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pc: convert pc_memory_init() to memory APIAvi Kivity2-19/+41
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pc: grab system_memoryAvi Kivity3-3/+12
While eventually this should come from the machine initialization function, take a short cut to avoid converting all machines now. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29qdev: Reset hot-plugged devicesJan Kiszka1-0/+3
Device models rely on the core invoking their reset handlers after init. We do this in the cold-plug case, but so far we miss this step after hot-plug. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-26xen: implement unplug protocol in xen_platformStefano Stabellini4-2/+92
The unplug protocol is necessary to support PV drivers in the guest: the drivers expect to be able to "unplug" emulated disks and nics before initializing the Xen PV interfaces. It is responsibility of the guest to make sure that the unplug is done before the emulated devices or the PV interface start to be used. We use pci_for_each_device to walk the PCI bus, identify the devices and disks that we want to disable and dynamically unplug them. Changes in v2: - use PCI_CLASS constants; - replace pci_unplug_device with qdev_unplug; - do not import hw/ide/internal.h in xen_platform.c; Changes in v3: - introduce piix3-ide-xen, that support hot-unplug; - move the unplug code to hw/ide/piix.c; - just call qdev_unplug from xen_platform.c to unplug the IDE disks; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-26xen: make xen_enabled even more cleverAlexander Graf1-1/+1
When using xen_enabled() we're currently only checking if xen is enabled at all during the build. But what if you want to build multiple targets out of which only one can potentially run xen code? That means that for generic code we'll still have to fall back to the variable and potentially slow the code down, but it's not as important as that is mostly xen device emulation which is not touched for non-xen targets. The target specific code however can with this patch see that it's unable to ever execute xen code. We can thus always return 0 on xen_enabled(), giving gcc enough hints to evict the mapcache code from the target memory management code. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2011-07-26xen: Fix xen_enabled().Anthony PERARD1-1/+1
Use the "host" CONFIG_ define instead of the "target" one. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-24Fix chrdev return value conversionBlue Swirl1-1/+1
6e1db57b2ac9025c2443c665a0d9e78748637b26 didn't convert brlapi or win32 chrdevs, breaking build for those. Fix by converting the chrdevs. Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-23Correct spelling of licensedMatthew Fernandez61-61/+61
Correct typos of "licenced" to "licensed". Reviewed-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23mc146818rtc: Handle host clock resetsJan Kiszka1-0/+20
Make use of the new clock reset notifier to update the RTC whenever rtc_clock is the host clock and that happens to jump backward. This avoids that the RTC stalls for the period the host clock was set back. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23notifier: Pass data argument to callbackJan Kiszka2-2/+2
This allows to pass additional information to the notifier callback which is useful if sender and receiver do not share any other distinct data structure. Will be used first for the clock reset notifier. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23ide: Turn properties any IDE device must have into bus propertiesMarkus Armbruster1-1/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23virtio-serial: Turn props any virtio-serial-bus device must have into bus propsMarkus Armbruster2-4/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23virtio-serial: Clean up virtser_bus_dev_print() outputMarkus Armbruster1-8/+5
Old version looks like this in info qtree (last four lines): dev: virtconsole, id "" dev-prop: is_console = 1 dev-prop: nr = 0 dev-prop: chardev = <null> dev-prop: name = <null> dev-prop-int: id: 0 dev-prop-int: guest_connected: 1 dev-prop-int: host_connected: 0 dev-prop-int: throttled: 0 Indentation is off, and "dev-prop-int" suggests these are properties you can configure with -device, which isn't the case. The other buses' print_dev() callbacks don't do that. For instance, PCI's output looks like this: class Ethernet controller, addr 00:03.0, pci id 1af4:1000 (sub 1af4:0001) bar 0: i/o at 0xffffffffffffffff [0x1e] bar 1: mem at 0xffffffffffffffff [0xffe] bar 6: mem at 0xffffffffffffffff [0xfffe] Change virtser_bus_dev_print() to that style. Result: dev: virtconsole, id "" dev-prop: is_console = 1 dev-prop: nr = 0 dev-prop: chardev = <null> dev-prop: name = <null> port 0, guest on, host off, throttle off Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23usb-ccid: Drop unused CCIDCardInfo callback print()Markus Armbruster2-12/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23vga: Fix type of lfb/map_addr/end.Richard Henderson1-5/+5
These addresses have been passed through pci_to_cpu_addr, and thus need to be full target_phys_addr_t. Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23qemu-char: Print strerror message on failureKevin Wolf3-6/+8
The only way for chardev drivers to communicate an error was to return a NULL pointer, which resulted in an error message that said _that_ something went wrong, but not _why_. This patch changes the interface to return 0/-errno and updates qemu_chr_open_opts to use strerror to display a more helpful error message. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23multiboot: Support commas in module parametersAdam Lackorzynski1-9/+9
Support commas in the parameter list of multiboot modules as well as for the kernel command line, by using double commas (via get_opt_value()). Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23report serial devices created with -device in the PIIX4 config spacePaolo Bonzini1-5/+17
Serial and parallel devices created with -device are not reported in the PIIX4 configuration space, and are hence not picked up by the DSDT. This upsets Windows, which hides them altogether from the guest. To avoid this, check at the end of machine initialization whether the corresponding I/O ports have been registered. The new function in ioport.c does this; this also requires a tweak to isa_unassign_ioport. I left the comment in piix4_pm_initfn since the registers I moved do seem to match the 82371AB datasheet. There are some quirks though. We are setting this bit: "Device 8 EIO Enable (EIO_EN_DEV8)—R/W. 1=Enable PCI access to the device 8 enabled I/O ranges to be claimed by PIIX4 and forwarded to the ISA/EIO bus. 0=Disable. The LPT_MON_EN must be set to enable the decode." but not LPT_MON_EN (bit 18 at 50h): LPT Port Enable (LPT_MON_EN)—R/W. 1=Enable accesses to parallel port address range (LPT_DEC_SEL) to generate a device 8 (parallel port) decode event. 0=Disable. We're also setting the LPT_DEC_SEL field (that's the 0x60 written to 63h) to 11, which means reserved, rather than to 01 (378h-37Fh). Likewise we're not setting SA_MON_EN, SB_MON_EN (respectively bit 14 and bit 16 at address 50h) for the serial ports. However, we're setting COMA_DEC_SEL and COMB_DEC_SEL correctly, unlike the corresponding register for the parallel port. All these fields are left as they are, since they are probably only meant to be used in the DSDT. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Consistently use qemu_macaddr_default_if_unsetJan Kiszka7-8/+8
Drop the open-coded MAC assignment from net_init_nic and replace it with standard qemu_macaddr_default_if_unset which is also used by qdev. That avoid creating colliding MACs when instantiating NICs via different mechanisms. This change requires to store the MAC as MACAddr in NICInfo, and the remaining nd_table users need to be updated. Based on suggestion by Peter Maydell. CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-22Merge remote-tracking branch 'spice/spice.v39' into stagingAnthony Liguori1-2/+2
2011-07-22Merge remote-tracking branch 'kraxel/usb.21' into stagingAnthony Liguori2-5/+10
2011-07-22Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori10-58/+52
2011-07-22usb-uhci: fix irq handling on error.Gerd Hoffmann1-0/+6
Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt occurred also had its IOC bit set, both this bit and Bit 0 are set." Make UHCI emulation do that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-22usb-hid: fixup changed tracking.Gerd Hoffmann1-5/+4
Remove leftover calls to usb_hid_changed(). Take care to update the changed flag after delivering a event via GET_REPORT like we do when sending events via interrupt endpoint. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20ds1225y: convert to qdev device, and use it in MIPS Jazz emulationHervé Poussineau3-31/+82
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20ds1225y: use trace frameworkHervé Poussineau1-11/+5
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20ds1225y: Remove protection stuff, which doesn't belong to this deviceHervé Poussineau2-42/+1
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20usb-serial doesn't support migrationGerd Hoffmann1-0/+7
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2024-12-28 13:14:39 +0000