aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster564-75/+656
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-11qemu-common: Move qemu_isalnum() etc. to qemu/ctype.hMarkus Armbruster4-2/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-11qemu-common: Move tcg_enabled() etc. to sysemu/tcg.hMarkus Armbruster3-0/+4
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h, sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in qemu-common.h. This necessitates inclusion of qemu-common.h into headers, which is against the rules spelled out in qemu-common.h's file comment. Move tcg_enabled() & friends into their own header sysemu/tcg.h, and adjust #include directives. Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Rebased with conflicts resolved automatically, except for accel/tcg/tcg-all.c]
2019-06-10target/xtensa: Use env_cpu, env_archcpuRichard Henderson1-1/+1
Cleanup in the boilerplate that each target must define. Replace xtensa_env_get_cpu with env_archcpu. The combination CPU(xtensa_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Move cpu_get_tb_cpu_state below the include of "exec/cpu-all.h" so that the definition of env_cpu is available. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/unicore32: Use env_cpu, env_archcpuRichard Henderson1-1/+1
Cleanup in the boilerplate that each target must define. Replace uc32_env_get_cpu with env_archcpu. The combination CPU(uc32_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/sparc: Use env_cpu, env_archcpuRichard Henderson3-5/+5
Cleanup in the boilerplate that each target must define. Replace sparc_env_get_cpu with env_archcpu. The combination CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/ppc: Use env_cpu, env_archcpuRichard Henderson3-12/+12
Cleanup in the boilerplate that each target must define. Replace ppc_env_get_cpu with env_archcpu. The combination CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/nios2: Use env_cpu, env_archcpuRichard Henderson1-4/+1
Cleanup in the boilerplate that each target must define. Replace nios2_env_get_cpu with env_archcpu. The combination CPU(nios2_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/mips: Use env_cpu, env_archcpuRichard Henderson2-2/+2
Cleanup in the boilerplate that each target must define. Replace mips_env_get_cpu with env_archcpu. The combination CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/i386: Use env_cpu, env_archcpuRichard Henderson2-3/+3
Cleanup in the boilerplate that each target must define. Replace x86_env_get_cpu with env_archcpu. The combination CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson1-1/+1
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10Merge remote-tracking branch 'remotes/kraxel/tags/usb-20190607-pull-request' ↵Peter Maydell1-27/+30
into staging usb-mtp: refactor the flow of usb_mtp_write_data # gpg: Signature made Fri 07 Jun 2019 17:56:31 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20190607-pull-request: usb-mtp: refactor the flow of usb_mtp_write_data Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-07usb-mtp: refactor the flow of usb_mtp_write_dataBandan Das1-27/+30
There's no functional change but the flow is (hopefully) more consistent for both file and folder object types. Signed-off-by: Bandan Das <bsd@redhat.com> Message-Id: <20190401211712.19012-4-bsd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-07Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190607-2' into stagingPeter Maydell1-0/+2
s390x updates: - tcg: finalize implementation for the vector facility and add it to the 'qemu' cpu model - linux-user: properly generate ELF_HWCAP # gpg: Signature made Fri 07 Jun 2019 15:14:42 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20190607-2: (34 commits) linux-user: elf: ELF_HWCAP for s390x s390x/tcg: Use tcg_gen_gvec_bitsel for VECTOR SELECT s390x: Bump the "qemu" CPU model up to a stripped-down z13 s390x/tcg: We support the Vector Facility s390x/tcg: Allow linux-user to use vector instructions s390x/tcg: Implement VECTOR FP TEST DATA CLASS IMMEDIATE s390x/tcg: Implement VECTOR FP SUBTRACT s390x/tcg: Implement VECTOR FP SQUARE ROOT s390x/tcg: Implement VECTOR FP PERFORM SIGN OPERATION s390x/tcg: Implement VECTOR FP MULTIPLY AND (ADD|SUBTRACT) s390x/tcg: Implement VECTOR FP MULTIPLY s390x/tcg: Implement VECTOR LOAD ROUNDED s390x/tcg: Implement VECTOR LOAD LENGTHENED s390x/tcg: Implement VECTOR LOAD FP INTEGER s390x/tcg: Implement VECTOR FP DIVIDE s390x/tcg: Implement VECTOR FP CONVERT TO LOGICAL 64-BIT s390x/tcg: Implement VECTOR FP CONVERT TO FIXED 64-BIT s390x/tcg: Implement VECTOR FP CONVERT FROM LOGICAL 64-BIT s390x/tcg: Implement VECTOR FP CONVERT FROM FIXED 64-BIT s390x/tcg: Implement VECTOR FP COMPARE (EQUAL|HIGH|HIGH OR EQUAL) ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-07s390x: Bump the "qemu" CPU model up to a stripped-down z13David Hildenbrand1-0/+2
We don't care about the other two missing base features: - S390_FEAT_DFP_PACKED_CONVERSION - S390_FEAT_GROUP_GEN13_PTFF Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-06-07vfio/display: set dmabuf modifier fieldGerd Hoffmann1-0/+1
Fill the new QemuDmaBuf->modifier field properly from plane info. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Message-id: 20190529072144.26737-3-kraxel@redhat.com
2019-06-06Merge remote-tracking branch ↵Peter Maydell15-25/+18
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Trivial fixes 06/06/2019 # gpg: Signature made Thu 06 Jun 2019 12:05:50 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/watchdog/wdt_i6300esb: Use DEVICE() macro to access DeviceState.qdev hw/scsi: Use the QOM BUS() macro to access BusState.qbus hw/sd: Use the QOM BUS() macro to access BusState.qbus hw/audio/ac97: Use the QOM DEVICE() macro to access DeviceState.qdev hw/vfio/pci: Use the QOM DEVICE() macro to access DeviceState.qdev hw/usb-storage: Use the QOM DEVICE() macro to access DeviceState.qdev hw/isa: Use the QOM DEVICE() macro to access DeviceState.qdev hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbus hw/pci-bridge: Use the QOM BUS() macro to access BusState.qbus hw/scsi/vmw_pvscsi: Use qbus_reset_all() directly docs/devel/build-system: Update an example test: Fix make target check-report.tap util: Adjust qemu_guest_getrandom_nofail for Coverity vhost: fix incorrect print type migration: fix a typo hw/rdma: Delete unused headers inclusion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-06Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell20-139/+192
virtio, pci, pc: cleanups, features stricter rules for acpi tables: we now fail on any difference that isn't whitelisted. vhost-scsi migration. some cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 05 Jun 2019 20:55:04 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: bios-tables-test: ignore identical binaries tests: acpi: add simple arm/virt testcase tests: add expected ACPI tables for arm/virt board bios-tables-test: list all tables that differ vhost-scsi: Allow user to enable migration vhost-scsi: Add VMState descriptor vhost-scsi: The vhost backend should be stopped when the VM is not running bios-tables-test: add diff allowed list vhost: fix memory leak in vhost_user_scsi_realize vhost: fix incorrect print type vhost: remove the dead code docs: smbios: remove family=x from type2 entry description pci: Fold pci_get_bus_devfn() into its sole caller pci: Make is_bridge a bool pcie: Simplify pci_adjust_config_limit() acpi: pci: use build_append_foo() API to construct MCFG hw/acpi: Consolidate build_mcfg to pci.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-06hw/watchdog/wdt_i6300esb: Use DEVICE() macro to access DeviceState.qdevPhilippe Mathieu-Daudé1-1/+1
Rather than looking inside the definition of a DeviceState with "s->qdev", use the QOM prefered style: "DEVICE(s)". This patch was generated using the following Coccinelle script: // Use DEVICE() macros to access DeviceState.qdev @use_device_macro_to_access_qdev@ expression obj; identifier dev; @@ -&obj->dev.qdev +DEVICE(obj) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20190528164020.32250-11-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/scsi: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé3-4/+4
Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20190528164020.32250-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/sd: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé2-2/+2
Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190528164020.32250-6-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/audio/ac97: Use the QOM DEVICE() macro to access DeviceState.qdevPhilippe Mathieu-Daudé1-1/+1
Rather than looking inside the definition of a DeviceState with "s->qdev", use the QOM prefered style: "DEVICE(s)". This patch was generated using the following Coccinelle script (with a bit of manual fix-up, removing an extra space to please checkpatch.pl): // Use DEVICE() macros to access DeviceState.qdev @use_device_macro_to_access_qdev@ expression obj; identifier dev; @@ -&obj->dev.qdev +DEVICE(obj) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>. Message-Id: <20190528164020.32250-7-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/vfio/pci: Use the QOM DEVICE() macro to access DeviceState.qdevPhilippe Mathieu-Daudé1-2/+2
Rather than looking inside the definition of a DeviceState with "s->qdev", use the QOM prefered style: "DEVICE(s)". This patch was generated using the following Coccinelle script: // Use DEVICE() macros to access DeviceState.qdev @use_device_macro_to_access_qdev@ expression obj; identifier dev; @@ -&obj->dev.qdev +DEVICE(obj) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <20190528164020.32250-10-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/usb-storage: Use the QOM DEVICE() macro to access DeviceState.qdevPhilippe Mathieu-Daudé1-1/+1
Rather than looking inside the definition of a DeviceState with "s->qdev", use the QOM prefered style: "DEVICE(s)". This patch was generated using the following Coccinelle script: // Use DEVICE() macros to access DeviceState.qdev @use_device_macro_to_access_qdev@ expression obj; identifier dev; @@ -&obj->dev.qdev +DEVICE(obj) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20190528164020.32250-9-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/isa: Use the QOM DEVICE() macro to access DeviceState.qdevPhilippe Mathieu-Daudé2-2/+2
Rather than looking inside the definition of a DeviceState with "s->qdev", use the QOM prefered style: "DEVICE(s)". This patch was generated using the following Coccinelle script: // Use DEVICE() macros to access DeviceState.qdev @use_device_macro_to_access_qdev@ expression obj; identifier dev; @@ -&obj->dev.qdev +DEVICE(obj) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20190528164020.32250-8-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé1-2/+2
Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190528164020.32250-5-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/pci-bridge: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé1-1/+1
Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20190528164020.32250-4-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/scsi/vmw_pvscsi: Use qbus_reset_all() directlyPhilippe Mathieu-Daudé1-2/+2
Since the BusState is accesible from the SCSIBus object, it is pointless to use qbus_reset_all_fn. Use qbus_reset_all() directly. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Message-Id: <20190528164020.32250-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06vhost: fix incorrect print typeJie Wang1-1/+1
fix incorrect print type in vhost_virtqueue_stop Signed-off-by: Jie Wang <wangjie88@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06hw/rdma: Delete unused headers inclusionYuval Shaia1-7/+0
This is a trivial cleanup patch. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kheib@redhat.com> Message-Id: <20190505105112.22691-1-yuval.shaia@oracle.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-04scsi-disk: Use qdev_prop_drive_iothreadKevin Wolf2-14/+23
This makes use of qdev_prop_drive_iothread for scsi-disk so that the disk can be attached to a node that is already in the target AioContext. We need to check that the HBA actually supports iothreads, otherwise scsi-disk must make sure that the node is already in the main AioContext. This changes the error message for conflicting iothread settings. Previously, virtio-scsi produced the error message, now it comes from blk_set_aio_context(). Update a test case accordingly. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04block: Add qdev_prop_drive_iothread property typeKevin Wolf1-5/+38
Some qdev block devices have support for iothreads and take care of the AioContext they are running in, but most devices don't know about any of this. For the latter category, the qdev drive property must make sure that their BlockBackend is in the main AioContext. Unfortunately, while the current code just does the same thing for devices that do support iothreads, this is not correct and it would show as soon as we actually try to keep a consistent AioContext assignment across all nodes and users of a block graph subtree: If a node is already in a non-default AioContext because of one of its users, attaching a new device should still be possible if that device can work in the same AioContext. Switching the node back to the main context first and only then into the device AioContext causes failure (because the existing user wouldn't allow the switch to the main context). So devices that support iothreads need a different kind of drive property that leaves the node in its current AioContext, but by using this type, the device promises to check later that it can work with this context. This patch adds the qdev infrastructure that allows devices to signal that they handle iothreads and qdev should leave the AioContext alone. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04block: Add BlockBackend.ctxKevin Wolf5-5/+7
This adds a new parameter to blk_new() which requires its callers to declare from which AioContext this BlockBackend is going to be used (or the locks of which AioContext need to be taken anyway). The given context is only stored and kept up to date when changing AioContexts. Actually applying the stored AioContext to the root node is saved for another commit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04block: Add Error to blk_set_aio_context()Kevin Wolf3-8/+20
Add an Error parameter to blk_set_aio_context() and use bdrv_child_try_set_aio_context() internally to check whether all involved nodes can actually support the AioContext switch. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04nvme: add Get/Set Feature Timestamp supportKenneth Heitke3-2/+108
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com> Reviewed-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-03q35: Revert to kernel irqchipAlex Williamson3-2/+20
Commit b2fc91db8447 ("q35: set split kernel irqchip as default") changed the default for the pc-q35-4.0 machine type to use split irqchip, which turned out to have disasterous effects on vfio-pci INTx support. KVM resampling irqfds are registered for handling these interrupts, but these are non-functional in split irqchip mode. We can't simply test for split irqchip in QEMU as userspace handling of this interrupt is a significant performance regression versus KVM handling (GeForce GPUs assigned to Windows VMs are non-functional without forcing MSI mode or re-enabling kernel irqchip). The resolution is to revert the change in default irqchip mode in the pc-q35-4.1 machine and create a pc-q35-4.0.1 machine for the 4.0-stable branch. The qemu-q35-4.0 machine type should not be used in vfio-pci configurations for devices requiring legacy INTx support without explicitly modifying the VM configuration to use kernel irqchip. Link: https://bugs.launchpad.net/qemu/+bug/1826422 Fixes: b2fc91db8447 ("q35: set split kernel irqchip as default") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <155786484688.13873.6037015630912983760.stgit@gimli.home> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03imx25-pdk: create ds1338 for qtest inside the testPaolo Bonzini1-9/+0
There is no need to have a test device created by the board. Instead, create it in the qtest so that we will be able to run it on other boards too. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03edu: uses uint64_t in dma operationLi Qiang1-8/+9
The dma related variable dma.dst/src/cnt is dma_addr_t, it is uint64_t in x64 platform. Change these usage from uint32_to uint64_t to avoid trancation in edu_dma_timer. Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20190510164349.81507-4-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03edu: mmio: allow 64-bit access in read dispatchLi Qiang1-1/+5
The edu spec says when address >= 0x80, the MMIO area can be accessed by 64-bit. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-Id: <20190510164349.81507-3-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03edu: mmio: allow 64-bit accessLi Qiang1-0/+9
The edu spec says the MMIO area can be accessed by 64-bit. However currently the 'max_access_size' is not so the MMIO access dispatch can only access 32-bit one time. This patch fixes this to respect the spec. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-Id: <20190510164349.81507-2-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-02vhost-scsi: Allow user to enable migrationLiran Alon1-10/+20
In order to perform a valid migration of a vhost-scsi device, the following requirements must be met: (1) The virtio-scsi device state needs to be saved & loaded. (2) The vhost backend must be stopped before virtio-scsi device state is saved: (2.1) Sync vhost backend state to virtio-scsi device state. (2.2) No further I/O requests are made by vhost backend to target SCSI device. (2.3) No further guest memory access takes place after VM is stopped. (3) Requests in-flight to target SCSI device are completed before migration handover. (4) Target SCSI device state needs to be saved & loaded into the destination host target SCSI device. Previous commit ("vhost-scsi: Add VMState descriptor") add support to save & load the device state using VMState. This meets requirement (1). When VM is stopped by migration thread (On Pre-Copy complete), the following code path is executed: migration_completion() -> vm_stop_force_state() -> vm_stop() -> do_vm_stop(). do_vm_stop() calls first pause_all_vcpus() which pause all guest vCPUs and then call vm_state_notify(). In case of vhost-scsi device, this will lead to the following code path to be executed: vm_state_notify() -> virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop(). vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and vhost_scsi_common_stop(). vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to vhost backend which will reach kernel's vhost_scsi_clear_endpoint() which process all pending I/O requests and wait for them to complete (vhost_scsi_flush()). This meets requirement (3). vhost_scsi_common_stop() will stop the vhost backend. As part of this stop, dirty-bitmap is synced and vhost backend state is synced with virtio-scsi device state. As at this point guest vCPUs are already paused, this meets requirement (2). At this point we are left with requirement (4) which is target SCSI device specific and therefore cannot be done by QEMU. Which is the main reason why vhost-scsi adds a migration blocker. However, as this can be handled either by an external orchestrator or by using shared-storage (i.e. iSCSI), there is no reason to limit the orchestrator from being able to explictly specify it wish to enable migration even when VM have a vhost-scsi device. Considering all the above, this commit allows orchestrator to explictly specify that it is responsbile for taking care of requirement (4) and therefore vhost-scsi should not add a migration blocker. Reviewed-by: Nir Weiner <nir.weiner@oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20190416125912.44001-4-liran.alon@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-02vhost-scsi: Add VMState descriptorNir Weiner1-0/+23
As preparation of enabling migration of vhost-scsi device, define it’s VMState. Note, we keep the convention of verifying in the pre_save() method that the vhost backend must be stopped before attempting to save the device state. Similar to how it is done for vhost-vsock. Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Message-Id: <20190416125912.44001-3-liran.alon@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-02vhost-scsi: The vhost backend should be stopped when the VM is not runningNir Weiner1-0/+4
vhost-scsi doesn’t takes into account whether the VM is running or not in order to decide if it should start/stop vhost backend. This would lead to vhost backend still being active when VM's RunState suddenly change to stopped. An example of when this issue is encountered is when Live-Migration Pre-Copy phase completes. As in this case, VM state will be changed to stopped (while vhost backend is still active), which will result in virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status() executed but vhost_scsi_set_status() will just return without stopping vhost backend. To handle this, change code to consider that vhost processing should be stopped when VM is not running. Similar to how it is done in vhost-vsock device at vhost_vsock_set_status(). Fixes: 5e9be92d7752 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”) Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Message-Id: <20190416125912.44001-2-liran.alon@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-30Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' ↵Peter Maydell19-104/+1378
into staging ppc patch queue 2019-05-29 Next pull request against qemu-4.1. Highlights: * KVM accelerated support for the XIVE interrupt controller in PAPR guests * A number of TCG vector fixes * Fixes for the PReP / 40p machine * Improvements to make check-tcg test coverage Other than that it's just a bunch of assorted fixes, cleanups and minor improvements. This supersedes both the pull request dated 2019-05-21 and the one dated 2019-05-22. I've dropped one hunk which I think may have caused the check-tcg failure that Peter saw (by enabling the ppc64abi32 build, which I think has been broken for ages). I'm not entirely certain, since I haven't reproduced exactly the same failure. # gpg: Signature made Wed 29 May 2019 07:49:04 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits) ppc/pnv: add dummy XSCOM registers for PRD initialization ppc/pnv: introduce new skiboot platform properties spapr: Don't migrate the hpt_maxpagesize cap to older machine types spapr: change default interrupt mode to 'dual' spapr/xive: fix multiple resets when using the 'dual' interrupt mode docs: provide documentation on the POWER9 XIVE interrupt controller spapr/irq: add KVM support to the 'dual' machine ppc/xics: fix irq priority in ics_set_irq_type() spapr/irq: initialize the IRQ device only once spapr/irq: introduce a spapr_irq_init_device() helper spapr: check for the activation of the KVM IRQ device spapr: introduce routines to delete the KVM IRQ device sysbus: add a sysbus_mmio_unmap() helper spapr/xive: activate KVM support spapr/xive: add migration support for KVM spapr/xive: introduce a VM state change handler spapr/xive: add state synchronization with KVM spapr/xive: add hcall support when under KVM spapr/xive: add KVM support spapr: Print out extra hints when CAS negotiation of interrupt mode fails ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-30Merge remote-tracking branch 'remotes/kraxel/tags/usb-20190529-pull-request' ↵Peter Maydell4-77/+169
into staging usb-hub: port count config option, emulate power switching, cleanups. usb-tablet, usb-host: bugfixes. # gpg: Signature made Wed 29 May 2019 07:28:18 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20190529-pull-request: usb-tablet: fix serial compat property usb-hub: emulate per port power switching usb-hub: add usb_hub_port_update() usb-hub: add helpers to update port state usb-hub: make number of ports runtime-configurable usb-hub: tweak feature names usb-host: avoid libusb_set_configuration calls usb-host: skip reset for untouched devices usb: call reset handler before updating state Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-30Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190529-pull-request' ↵Peter Maydell12-459/+1269
into staging vga: add vhost-user-gpu. # gpg: Signature made Wed 29 May 2019 05:40:02 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20190529-pull-request: hw/display: add vhost-user-vga & gpu-pci virtio-gpu: split virtio-gpu-pci & virtio-vga virtio-gpu: split virtio-gpu, introduce virtio-gpu-base spice-app: fix running when !CONFIG_OPENGL contrib: add vhost-user-gpu util: compile drm.o on posix virtio-gpu: add a pixman helper header virtio-gpu: add bswap helpers header vhost-user: add vhost_user_gpu_set_socket() virtio-gpu: add sanity check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-29vhost: fix memory leak in vhost_user_scsi_realizeJie Wang1-0/+3
fix memory leak in vhost_user_scsi_realize Signed-off-by: Jie Wang <wangjie88@huawei.com> Message-Id: <1556608500-12183-1-git-send-email-wangjie88@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-29vhost: fix incorrect print typeJie Wang1-1/+1
fix incorrect print type in vhost_virtqueue_stop Signed-off-by: Jie Wang <wangjie88@huawei.com> Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-29vhost: remove the dead codeJie Wang1-1/+0
remove the dead code Signed-off-by: Jie Wang <wangjie88@huawei.com> Message-Id: <1556604614-32081-1-git-send-email-wangjie88@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-29pci: Fold pci_get_bus_devfn() into its sole callerDavid Gibson1-32/+28
The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(), itself an old compatibility function. Fold the two together to avoid re-using the stale interface. While we're there replace the explicit fprintf()s with error_report(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190513061939.3464-6-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
generated by cgit v1.1 at 2024-07-27 11:30:58 +0000