aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2012-10-05Remove libhwStefan Weil4-137/+137
The entries for libhw* are no longer needed in .gitignore. There is also no longer a difference between common-obj-y and hw-obj-y, so one of those two macros is sufficient. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05rtc: implement century bytePaolo Bonzini1-9/+18
Implement the century byte in the RTC emulation, and test that it works. This leads to some annoying compatibility code because we need to treat a value of 2000 for the base_year property as "use the century byte properly" (which would be a value of 0). The century byte will now be always-zero, rather than always-20, for the MIPS Magnum machine whose base_year is 1980. Commit 42fc73a (Support epoch of 1980 in RTC emulation for MIPS Magnum, 2009-01-24) correctly said: With an epoch of 1980 and a year of 2009, one could argue that [the century byte] should hold either 0, 1, 19 or 20. NT 3.50 on MIPS does not read the century byte. so I picked the simplest and most sensible implementation which is to return 0 for 1980-2079, 1 for 2080-2179 and so on. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05rtc: map CMOS index 0x37 to 0x32 on read and writesPaolo Bonzini2-6/+13
QEMU's attempt to implement the century byte cover two possible places for the byte. A common one on modern chipsets is 0x32, but QEMU also stores the value in 0x37 (apparently for IBM PS/2 compatibility---it's only been 25 years). To simplify the implementation of the century byte, store it only at 0x32 but remap transparently 0x37 to 0x32 when reading and writing from CMOS. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05hw/r2d: add comment: this strncpy use is okJim Meyering1-0/+2
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05acpi: remove strzcpy (strncpy-identical) function; just use strncpyJim Meyering1-16/+8
Adjust all uses s/strzcpy/strncpy/ and mark these uses of strncpy as "ok". Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05vscsi: avoid unwarranted strncpyJim Meyering1-1/+1
Don't use strncpy when the source string is known to fit in the destination buffer. Use equivalent memcpy. We could even use strcpy, here, but some static analyzers warn about that, so don't add new uses. Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05virtio-9p: avoid unwarranted uses of strncpyJim Meyering3-4/+8
In all of these cases, the uses of strncpy were unnecessary, since at each point of use we know that the NUL-terminated source bytes fit in the destination buffer. Use memcpy in place of strncpy. Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05bt: replace fragile snprintf use and unwarranted strncpyJim Meyering1-5/+2
In bt_hci_name_req a failed snprintf could return len larger than sizeof(params.name), which means the following memset call would have a "length" value of (size_t)-1, -2, etc... Sounds scary. But currently, one can deduce that there is no problem: strlen(slave->lmp_name) is guaranteed to be smaller than CHANGE_LOCAL_NAME_CP_SIZE, which is the same as sizeof(params.name), so this cannot happen. Regardless, there is no justification for using snprintf+memset. Use pstrcpy instead. Also, in bt_hci_event_complete_read_local_name, use pstrcpy in place of unwarranted strncpy. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05lm32: avoid buffer overrunJim Meyering1-1/+1
Actually do what the comment says, using pstrcpy NUL-terminate: strncpy does not always do that. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05hw/9pfs: avoid buffer overrunJim Meyering1-2/+2
v9fs_add_dir_node and qemu_v9fs_synth_add_file used strncpy to form node->name, which requires NUL-termination, but strncpy does not ensure NUL-termination. Use pstrcpy, which does. Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05scsi, pci, qdev, isa-bus, sysbus: don't let *_get_fw_dev_path return NULLJim Meyering6-11/+7
Use g_strdup rather than strdup, because the sole caller (qdev_get_fw_dev_path_helper) assumes it gets non-NULL, and dereferences it. Besides, in that caller, the allocated buffer is already freed with g_free, so it's better to allocate with a matching g_strdup. In one case, (scsi-bus.c) it was trivial, so I replaced an snprintf+ g_strdup combination with an equivalent g_strdup_printf use. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04Merge remote-tracking branch 'sstabellini/xen-2012-10-03' into stagingAnthony Liguori4-17/+38
* sstabellini/xen-2012-10-03: xen: Set the vram dirty when an error occur. exec, memory: Call to xen_modified_memory. exec: Introduce helper to set dirty flags. xen: Introduce xen_modified_memory. QMP, Introduce xen-set-global-dirty-log command. qemu/xen: Add 64 bits big bar support on qemu xen: Fix, no unplug of pt device by platform device.
2012-10-04Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori6-55/+27
* kwolf/for-anthony: (30 commits) qemu-iotests: add tests for streaming error handling qemu-iotests: map underscore to dash in QMP argument names blkdebug: process all set_state rules in the old state stream: add on-error argument block: introduce block job error iostatus: reorganize io error code iostatus: change is_read to a bool iostatus: move BlockdevOnError declaration to QAPI iostatus: rename BlockErrorAction, BlockQMPEventAction qemu-iotests: add test for pausing a streaming operation qmp: add block-job-pause and block-job-resume block: add support for job pause/resume qmp: add 'busy' member to BlockJobInfo block: add block_job_query block: move job APIs to separate files block: fix documentation of block_job_cancel_sync qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE qemu-iotests: add initial tests for live block commit QAPI: add command for live block commit, 'block-commit' block: helper function, to find the base image of a chain ...
2012-10-04Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-9/+3
* qmp/queue/qmp: block: live snapshot documentation tweaks input: index_from_key(): drop unused code qmp: qmp_send_key(): accept key codes in hex input: qmp_send_key(): simplify hmp: dump-guest-memory: hardcode protocol argument to "file:" qmp: dump-guest-memory: don't spin if non-blocking fd would block qmp: dump-guest-memory: improve schema doc (again) qapi: convert add_client monitor: add Error * argument to monitor_get_fd pci-assign: use monitor_handle_fd_param qapi: add "unix" to the set of reserved words qapi: do not protect enum values from namespace pollution Add qemu-ga-client script Support settimeout in QEMUMonitorProtocol Make negotiation optional in QEMUMonitorProtocol
2012-10-04Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori4-20/+32
* mst/tags/for_anthony: virtio-serial-bus: let chardev know the exact number of bytes requested virtio: Introduce virtqueue_get_avail_bytes() virtio: use unsigned int for counting bytes in vq iov: add const annotation virtio-net: fix used len for tx virtio: don't mark unaccessed memory as dirty
2012-10-04Merge remote-tracking branch 'kraxel/usb.66' into stagingAnthony Liguori3-106/+137
* kraxel/usb.66: usb: Fix usb_packet_map() in the presence of IOMMUs usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2) ehci: Fix interrupt packet MULT handling xhci: create a memory region for each port xhci: route string & usb hub support xhci: tweak limits compat: turn off msi/msix on xhci for old machine types add pc-1.3 machine type Conflicts: hw/pc_piix.c Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04Make target_phys_addr_t 64 bits unconditionallyAvi Kivity3-13/+3
The hassle and compile time overhead of maintaining both 32-bit and 64-bit capable source isn't worth the tiny performance advantage which is seen on a minority of configurations. Switch to compiling libhw only once, with target_phys_addr_t unconditionally typedefed to uint64_t. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-03xen: Introduce xen_modified_memory.Anthony PERARD1-0/+1
This function is to be used during live migration. Every write access to the guest memory should call this funcion so the Xen tools knows which pages are dirty. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-10-03qemu/xen: Add 64 bits big bar support on qemuXudong Hao2-15/+31
Currently it is assumed PCI device BAR access < 4G memory. If there is such a device whose BAR size is larger than 4G, it must access > 4G memory address. This patch enable the 64bits big BAR support on qemu. Signed-off-by: Xudong Hao <xudong.hao@intel.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-10-03xen: Fix, no unplug of pt device by platform device.Anthony PERARD1-2/+6
The Xen platform device will unplug any NICs if requested by the guest (PVonHVM) including a NIC that would have been passthrough. This patch makes sure that a passthrough device will not be unplug. Reported-by: "Zhang, Yang Z" <yang.z.zhang@intel.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-10-01vfio_pci: fix build on 32-bit systemsAnthony Liguori1-1/+1
We cannot cast directly from pointer to uint64. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alex Barcelo <abarcelo@ac.upc.edu> Reported-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-01vfio: Enable vfio-pci and mark supportedAlex Williamson1-1/+2
Enabled for all softmmu guests supporting PCI on Linux hosts. Note that currently only x86 hosts have the kernel side VFIO IOMMU support for this. PPC (g3beige) is the only non-x86 guest known to work. ARM (veratile) hangs in firmware, others untested. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-01vfio: vfio-pci device assignment driverAlex Williamson2-0/+1978
This adds the core of the QEMU VFIO-based PCI device assignment driver. To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1, and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci module. To assign device 0000:05:00.0 to a guest, do the following: for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do vendor=$(cat /sys/bus/pci/devices/$dev/vendor) device=$(cat /sys/bus/pci/devices/$dev/device) if [ -e /sys/bus/pci/devices/$dev/driver ]; then echo $dev > /sys/bus/pci/devices/$dev/driver/unbind fi echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id done See Documentation/vfio.txt in the Linux kernel tree for further description of IOMMU groups and VFIO. Then launch qemu including the option: -device vfio-pci,host=0000:05:00.0 Legacy PCI interrupts (INTx) currently makes use of a kludge where we trap BAR accesses and assume the access is in response to an interrupt, therefore de-asserting and unmasking the interrupt. It's not quite as targetted as using the EOI for this, but it's self contained and seems to work across all architectures. The side-effect is a significant performance slow-down for device in INTx mode. Some devices, like graphics cards, don't really use their interrupt, so this can be turned off with the x-intx=off option, which disables INTx alltogether. This should be considered an experimental option until we refine this code. Both MSI and MSI-X are supported and avoid these issues. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-28iostatus: reorganize io error codePaolo Bonzini3-45/+17
Move the common part of IDE/SCSI/virtio error handling to the block layer. The new function bdrv_error_action subsumes all three of bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err. The same scheme will be used for errors in block jobs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28iostatus: change is_read to a boolPaolo Bonzini4-6/+6
Do this while we are touching this part of the code, before introducing more uses of "int is_read". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28iostatus: move BlockdevOnError declaration to QAPIPaolo Bonzini5-13/+13
This will let block-stream reuse the enum. Places that used the enums are renamed accordingly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28iostatus: rename BlockErrorAction, BlockQMPEventActionPaolo Bonzini3-3/+3
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers; drivers should only be told whether to stop/report/ignore the error. On the other hand, we want to keep using the nicer BlockErrorAction name in the drivers. So rename the enums, while leaving aside the names of the enum values for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28virtio-serial-bus: let chardev know the exact number of bytes requestedAmit Shah1-8/+3
Using the virtqueue_avail_bytes() function had an unnecessarily crippling effect on the number of bytes needed by the guest as reported to the chardev layer in the can_read() callback. Using the new virtqueue_get_avail_bytes() function will let us advertise the exact number of bytes we can send to the guest. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-28virtio: Introduce virtqueue_get_avail_bytes()Amit Shah2-8/+25
The current virtqueue_avail_bytes() is oddly named, and checks if a particular number of bytes are available in a vq. A better API is to fetch the number of bytes available in the vq, and let the caller do what's interesting with the numbers. Introduce virtqueue_get_avail_bytes(), which returns the number of bytes for buffers marked for both, in as well as out. virtqueue_avail_bytes() is made a wrapper over this new function. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-28virtio: use unsigned int for counting bytes in vqAmit Shah1-1/+1
The virtqueue_avail_bytes() function counts bytes in an int. Use an unsigned int instead. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-28virtio-net: fix used len for txMichael S. Tsirkin1-2/+2
There is no out sg for TX, so used buf length for tx should always be 0. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-28virtio: don't mark unaccessed memory as dirtyMichael S. Tsirkin1-1/+1
offset of accessed buffer is calculated using iov_length, so it can exceed accessed len. If that happens math in len - offset wraps around, and size becomes wrong. As real value is 0, so this is harmless but unnecessary. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-26Versatile Express: Add modelling of NOR flashFrancesco Lavra1-2/+24
This patch adds modelling of the two NOR flash banks found on the Versatile Express motherboard. Tested with U-Boot running on an emulated Versatile Express, with either A9 or A15 CoreTile. Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-26Versatile Express: Fix NOR flash 0 address and remove flash aliasFrancesco Lavra1-5/+2
In the A series memory map (implemented in the Cortex A15 CoreTile), the first NOR flash bank (flash 0) is mapped to address 0x08000000, while address 0x00000000 can be configured as alias to either the first or the second flash bank. This patch fixes the definition of flash 0 address, and for simplicity removes the alias definition. Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-26hw/armv7m_nvic: Correctly register GIC region when setting up NVICMeador Inge1-1/+2
When setting up the NVIC memory regions the memory range 0x100..0xcff is aliased to an IO memory region that belongs to the ARM GIC. This aliased region should be added to the NVIC memory container, but the actual GIC IO memory region was being added instead. This mixup was causing the wrong IO memory access functions to be called when accessing parts of the NVIC memory. Signed-off-by: Meador Inge <meadori@codesourcery.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-26pl190: fix read of VECTADDRBrendan Fennell1-6/+12
Reading VECTADDR was causing us to set the current priority to the wrong value, the most obvious effect of which was that we would return the vector for the wrong interrupt as the result of the read. Signed-off-by: Brendan Fennell <bfennell@skynet.ie> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-26pci-assign: use monitor_handle_fd_paramPaolo Bonzini1-9/+3
There is no need to open-code the choice between a file descriptor number or a named one. Just use monitor_handle_fd_param, which also takes care of printing the error message. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-09-26usb: Fix usb_packet_map() in the presence of IOMMUsDavid Gibson1-9/+15
With the IOMMU infrastructure introduced before 1.2, we need to use dma_memory_map() to obtain a qemu pointer to memory from an IO bus address. However, dma_memory_map() alters the given length to reflect the length over which the used DMA translation is valid - which could be either more or less than the requested length. usb_packet_map() does not correctly handle these cases, simply failing if dma_memory_map() alters the requested length. If dma_memory_map() increased the length, we just need to use the requested length for the qemu_iovec_add(). However, if it decreased the length, it means that a single DMA translation is not valid for the whole sglist element, and so we need to loop, splitting it up into multiple iovec entries for each piece with a DMA translation (in practice >2 pieces is unlikely). This patch implements the correct behaviour Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-26ehci: Fix interrupt packet MULT handlingHans de Goede1-20/+20
There are several issues with our handling of the MULT epcap field of interrupt qhs, which this patch fixes. 1) When we don't execute a transaction because of the transaction counter being 0, p->async stays EHCI_ASYNC_NONE, and the next time we process the same qtd we hit an assert in ehci_state_fetchqtd because of this. Even though I believe that this is caused by 3 below, this patch still removes the assert, as that can still happen without 3, when multiple packets are queued for the same interrupt ep. 2) We only *check* the transaction counter from ehci_state_execute, any packets queued up by fill_queue bypass this check. This is fixed by not calling fill_queue for interrupt packets. 3) Some versions of Windows set the MULT field of the qh to 0, which is a clear violation of the EHCI spec, but still they do it. This means that we will never execute a qtd for these, making interrupt ep-s on USB-2 devices not work, and after recent changes, triggering 1). So far we've stored the transaction counter in our copy of the mult field, but with this beginnig at 0 already when dealing with these version of windows this won't work. So this patch adds a transact_ctr field to our qh struct, and sets this to the MULT field value on fetchqh. When the MULT field value is 0, we set it to 4. Assuming that windows gets way with setting it to 0, by the actual hardware going horizontal on a 1 -> 0 transition, which will give it 4 transactions (MULT goes from 0 - 3). Note that we cannot stop on detecting the 1 -> 0 transition, as our decrement of the transaction counter, and checking for it are done in 2 different places. Reported-by: Shawn Starr <shawn.starr@rogers.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-26xhci: create a memory region for each portGerd Hoffmann1-42/+43
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-26xhci: route string & usb hub supportGerd Hoffmann1-31/+55
Parse route string in slot contexts and support devices connected via hub.
2012-09-26xhci: tweak limitsGerd Hoffmann1-4/+4
Set maxports to 15. This is what the usb3 route string can handle. Set maxslots to 64. This is more than the number of root ports we can have, but with additional hubs you can end up with more devices. Set maxintrs (aka msi vectors) to 16. Should be enougth, especially considering that vectors are a limited ressource. Linux guests use only three at the moment. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-26compat: turn off msi/msix on xhci for old machine typesGerd Hoffmann1-0/+16
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-26add pc-1.3 machine typeGerd Hoffmann1-2/+10
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-25add a boot parameter to set reboot timeoutAmos Kong1-0/+25
Added an option to let qemu transfer a configuration file to bios, "etc/boot-fail-wait", which could be specified by command -boot reboot-timeout=T T have a max value of 0xffff, unit is ms. With this option, guest will wait for a given time if not find bootabled device, then reboot. If reboot-timeout is '-1', guest will not reboot, qemu passes '-1' to bios by default. This feature need the new seabios's support. Seabios pulls the value from the fwcfg "file" interface, this interface is used because SeaBIOS needs a reliable way of obtaining a name, value size, and value. It in no way requires that there be a real file on the user's host machine. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25ivshmem: add 64bit optionGerd Hoffmann2-3/+14
This patch adds a "use64" property which will make the ivshmem driver register a 64bit memory bar when set, so you have something to play with when testing 64bit pci bits. It also allows to have quite big shared memory regions, like this: [root@fedora ~]# lspci -vs1:1 01:01.0 RAM memory: Red Hat, Inc Device 1110 Subsystem: Red Hat, Inc Device 1100 Physical Slot: 1-1 Flags: fast devsel Memory at fd400000 (32-bit, non-prefetchable) [disabled] [size=256] Memory at 8040000000 (64-bit, prefetchable) [size=1G] [ v5: rebase, update compat property for post-1.2 merge ] [ v4: rebase & adapt to latest master again ] [ v3: rebase & adapt to latest master ] [ v2: default to on as suggested by avi, turn off for pc-$old using compat property ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25compat: turn off msi/msix on xhci for old machine typesGerd Hoffmann1-0/+16
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25add pc-1.3 machine typeGerd Hoffmann1-2/+10
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25target-sparc: use notifier for signaling guest system_powerdown commandIgor Mammedov1-1/+13
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-25target-arm: use notifier for signaling guest system_powerdown commandIgor Mammedov1-1/+13
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-23 13:39:41 +0000