aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2023-01-08Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell6-22/+75
* Atomic memslot updates for KVM (Emanuele, David) * Always send errors to logfile when daemonized (Greg) * Add support for IDE CompactFlash card (Lubomir) * First round of build system cleanups (myself) * First round of feature removals (myself) * Reduce "qemu/accel.h" inclusion (Philippe) # gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits) i386: SGX: remove deprecated member of SGXInfo target/i386: Add SGX aex-notify and EDECCSSA support util: remove support -chardev tty and -chardev parport util: remove support for hex numbers with a scaling suffix KVM: remove support for kernel-irqchip=off docs: do not talk about past removal as happening in the future meson: accept relative symlinks in "meson introspect --installed" data meson: cleanup compiler detection meson: support meson 0.64 -Doptimization=plain configure: test all warnings tests/qapi-schema: remove Meson workaround meson: cleanup dummy-cpus.c rules meson: tweak hardening options for Windows configure: remove backwards-compatibility and obsolete options configure: preserve qemu-ga variables configure: cleanup $cpu tests configure: remove dead function configure: remove useless write_c_skeleton ide: Add "ide-cf" driver, a CompactFlash card ide: Add 8-bit data mode ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-07Merge tag 'pull-loongarch-20230106' of https://gitlab.com/gaosong/qemu into ↵Peter Maydell3-14/+69
staging pull-loongarch-20230106 # gpg: Signature made Fri 06 Jan 2023 06:21:22 GMT # gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF # gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF * tag 'pull-loongarch-20230106' of https://gitlab.com/gaosong/qemu: hw/intc/loongarch_pch: Change default irq number of pch irq controller hw/intc/loongarch_pch_pic: add irq number property hw/intc/loongarch_pch_msi: add irq number property Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06Merge tag 'pull-riscv-to-apply-20230106' of ↵Peter Maydell10-107/+238
https://github.com/alistair23/qemu into staging First RISC-V PR for QEMU 8.0 * Fix PMP propagation for tlb * Collection of bug fixes * Bump the OpenTitan supported version * Add smstateen support * Support native debug icount trigger * Remove the redundant ipi-id property in the virt machine * Support cache-related PMU events in virtual mode * Add some missing PolarFire SoC io regions * Fix mret exception cause when no pmp rule is configured * Fix bug where disabling compressed instructions would crash QEMU * Add Zawrs ISA extension support * A range of code refactoring and cleanups # gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits) hw/intc: sifive_plic: Fix the pending register range check hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0 hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev" hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC hw/intc: sifive_plic: Update "num-sources" property default value hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize() hw/intc: sifive_plic: Improve robustness of the PLIC config parser hw/intc: sifive_plic: Drop PLICMode_H hw/riscv: spike: Remove misleading comments hw/riscv: Sort machines Kconfig options in alphabetical order hw/riscv: Fix opentitan dependency to SIFIVE_PLIC hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC RISC-V: Add Zawrs ISA extension support target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+ target/riscv: Simplify helper_sret() a little bit target/riscv: Set pc_succ_insn for !rvc illegal insn ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into stagingPeter Maydell3-19/+3
Fix race conditions in new user-only vma tracking. Add tcg backend paired register allocation. Cleanup tcg backend function call abi. # gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits) tests/tcg/multiarch: add vma-pthread.c accel/tcg: Handle false negative lookup in page_check_range accel/tcg: Use g_free_rcu for user-exec interval trees accel/tcg: Fix tb_invalidate_phys_page_unwind tcg: Add TCGHelperInfo argument to tcg_out_call tcg/aarch64: Merge tcg_out_callr into tcg_out_call tcg: Move ffi_cif pointer into TCGHelperInfo tcg: Factor init_ffi_layouts() out of tcg_context_init() tcg: Convert typecode_to_ffi from array to function tcg: Reorg function calls tcg: Use output_pref wrapper function tcg: Vary the allocation size for TCGOp tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*() accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb accel/tcg/plugin: Avoid duplicate copy in copy_call accel/tcg/plugin: Don't search for the function pointer index tcg: Use TCG_CALL_ARG_EVEN for TCI special case tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32 tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64 tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06hw/intc/loongarch_pch: Change default irq number of pch irq controllerTianrui Zhao2-2/+3
Change the default irq number of pch pic to 32, so that the irq number of pch msi is 224(256 - 32), and move the 'PCH_PIC_IRQ_NUM' macro to pci-host/ls7a.h and add prefix 'VIRT' on it to keep standard format. Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230104020518.2564263-4-zhaotianrui@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-01-06hw/intc/loongarch_pch_pic: add irq number propertyTianrui Zhao2-7/+35
With loongarch 7A1000 manual, irq number supported can be set in PCH_PIC_INT_ID_HI register. This patch adds irq number property for loongarch_pch_pic, so that virt machine can set different irq number when pch_pic intc is added. Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230104020518.2564263-3-zhaotianrui@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-01-06hw/intc/loongarch_pch_msi: add irq number propertyTianrui Zhao2-8/+34
This patch adds irq number property for loongarch msi interrupt controller, and remove hard coding irq number macro. Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230104020518.2564263-2-zhaotianrui@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-01-06hw/intc: sifive_plic: Fix the pending register range checkBin Meng1-2/+3
The pending register upper limit is currently set to plic->num_sources >> 3, which is wrong, e.g.: considering plic->num_sources is 7, the upper limit becomes 0 which fails the range check if reading the pending register at pending_base. Fixes: 1e24429e40df ("SiFive RISC-V PLIC Block") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-16-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initializationBin Meng1-2/+0
"hartid-base" and "priority-base" are zero by default. There is no need to initialize them to zero again. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-15-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0Bin Meng1-2/+3
At present the SiFive PLIC model "priority-base" expects interrupt priority register base starting from source 1 instead source 0, that's why on most platforms "priority-base" is set to 0x04 except 'opentitan' machine. 'opentitan' should have set "priority-base" to 0x04 too. Note the irq number calculation in sifive_plic_{read,write} is correct as the codes make up for the irq number by adding 1. Let's simply update "priority-base" to start from interrupt source 0 and add a comment to make it crystal clear. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Message-Id: <20221211030829.802437-14-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: virt: Fix the value of "riscv, ndev" in the dtbBin Meng1-1/+2
Commit 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") changed the value of VIRT_IRQCHIP_NUM_SOURCES from 127 to 53, which is VIRTIO_NDEV and also used as the value of "riscv,ndev" property in the dtb. Unfortunately this is wrong as VIRT_IRQCHIP_NUM_SOURCES should include interrupt source 0 but "riscv,ndev" does not. While we are here, we also fix the comments of platform bus irq range which is now "64 to 96", but should be "64 to 95", introduced since commit 1832b7cb3f64 ("hw/riscv: virt: Create a platform bus"). Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-13-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"Bin Meng1-1/+2
At present magic number is used to create "riscv,ndev" property in the dtb. Let's use the macro SIFIVE_U_PLIC_NUM_SOURCES that is used to instantiate the PLIC model instead. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-12-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Update "num-sources" property default valueBin Meng1-1/+7
At present the default value of "num-sources" property is zero, which does not make a lot of sense, as in sifive_plic_realize() we see s->bitfield_words is calculated by: s->bitfield_words = (s->num_sources + 31) >> 5; if the we don't configure "num-sources" property its default value zero makes s->bitfield_words zero too, which isn't true because interrupt source 0 still occupies one word. Let's change the default value to 1 meaning that only interrupt source 0 is supported by default and a sanity check in realize(). While we are here, add a comment to describe the exact meaning of this property that the number should include interrupt source 0. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-9-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in ↵Bin Meng1-3/+4
sifive_plic_realize() The realize() callback has an errp for us to propagate the error up. While we are here, correct the wrong multi-line comment format. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221211030829.802437-8-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Improve robustness of the PLIC config parserBin Meng1-8/+16
At present the PLIC config parser can only handle legal config string like "MS,MS". However if a config string like ",MS,MS,,MS,MS,," is given the parser won't get the correct configuration. This commit improves the config parser to make it more robust. Signed-off-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-7-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Drop PLICMode_HBin Meng1-1/+0
H-mode has been removed since priv spec 1.10. Drop it. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-6-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: spike: Remove misleading commentsBin Meng1-1/+0
PLIC is not included in the 'spike' machine. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-5-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: Sort machines Kconfig options in alphabetical orderBin Meng1-7/+9
SHAKTI_C machine Kconfig option was inserted in disorder. Fix it. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Message-Id: <20221211030829.802437-4-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: Fix opentitan dependency to SIFIVE_PLICBin Meng1-0/+1
Since commit ef6310064820 ("hw/riscv: opentitan: Update to the latest build") the IBEX PLIC model was replaced with the SiFive PLIC model in the 'opentitan' machine but we forgot the add the dependency there. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-3-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllersBin Meng1-0/+2
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt controllers regardless of how MSI is implemented. msi_nonbroken is initialized to true in both riscv_aplic_realize() and riscv_imsic_realize(). Select MSI_NONBROKEN in RISCV_APLIC and RISCV_IMSIC. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221211030829.802437-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLICBin Meng2-5/+1
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt controllers regardless of how MSI is implemented. msi_nonbroken is initialized to true in sifive_plic_realize(). Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from RISC-V machines. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Message-Id: <20221211030829.802437-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: fix out-of-bound access of source_priority arrayJim Shu1-1/+11
If the number of interrupt is not multiple of 32, PLIC will have out-of-bound access to source_priority array. Compute the number of interrupt in the last word to avoid this out-of-bound access of array. Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Message-Id: <20221127165753.30533-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/{misc, riscv}: pfsoc: add system controller as unimplementedConor Dooley3-6/+90
The system controller on PolarFire SoC is access via a mailbox. The control registers for this mailbox lie in the "IOSCB" region & the interrupt is cleared via write to the "SYSREG" region. It also has a QSPI controller, usually connected to a flash chip, that is used for storing FPGA bitstreams and used for In-Application Programming (IAP). Linux has an implementation of the system controller, through which the hwrng is accessed, leading to load/store access faults. Add the QSPI as unimplemented and a very basic (effectively unimplemented) version of the system controller's mailbox. Rather than purely marking the regions as unimplemented, service the mailbox requests by reporting failures and raising the interrupt so a guest can better handle the lack of support. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221117225518.4102575-4-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: pfsoc: add missing FICs as unimplementedConor Dooley1-52/+63
The Fabric Interconnect Controllers provide interfaces between the FPGA fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered 0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and does not show up on the MSS memory map. FIC4 is dedicated to the User Crypto Processor and does not show up on the MSS memory map either. FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1 are represented in QEMU, leading to load access violations while booting Linux for Icicle if PCIe is enabled as the root port is connected via either FIC 0 or 1. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-3-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/misc: pfsoc: add fabric clocks to ioscbConor Dooley1-0/+6
On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by "Clock Conditioning Circuitry" in the FPGA. The specific clock depends on the FPGA bitstream & can be locked to one particular {D,P}LL - in the Icicle Kit Reference Design v2022.09 or later this is/will be the case. Linux v6.1+ will have a driver for this peripheral and devicetrees that previously relied on "fixed-frequency" clock nodes have been switched over to clock-controller nodes. The IOSCB region is represented in QEMU, but the specific region of it that the CCCs occupy has not so v6.1-rcN kernels fail to boot in QEMU. Add the regions as unimplemented so that the status-quo in terms of boot is maintained. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-2-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: virt: Remove the redundant ipi-id propertyAtish Patra1-4/+0
The imsic DT binding[1] has changed and no longer require an ipi-id. The latest IMSIC driver dynamically allocates ipi id if slow-ipi is not defined. Get rid of the unused dt property which may lead to confusion. [1] https://lore.kernel.org/lkml/20221111044207.1478350-5-apatel@ventanamicro.com/ Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221122080529.1692533-1-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Renumber the S irqs for numa supportFrédéric Pétrot1-2/+2
Commit 40244040a7a changed the way the S irqs are numbered. This breaks when using numa configuration, e.g.: ./qemu-system-riscv64 -nographic -machine virt,dumpdtb=numa-tree.dtb \ -m 2G -smp cpus=16 \ -object memory-backend-ram,id=mem0,size=512M \ -object memory-backend-ram,id=mem1,size=512M \ -object memory-backend-ram,id=mem2,size=512M \ -object memory-backend-ram,id=mem3,size=512M \ -numa node,cpus=0-3,memdev=mem0,nodeid=0 \ -numa node,cpus=4-7,memdev=mem1,nodeid=1 \ -numa node,cpus=8-11,memdev=mem2,nodeid=2 \ -numa node,cpus=12-15,memdev=mem3,nodeid=3 leads to: Unexpected error in object_property_find_err() at ../qom/object.c:1304: qemu-system-riscv64: Property 'riscv.sifive.plic.unnamed-gpio-out[8]' not found This patch makes the nubering of the S irqs identical to what it was before. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Message-Id: <20221114135122.1668703-1-frederic.petrot@univ-grenoble-alpes.fr> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv/opentitan: add aon_timer base unimplWilfred Mallawa1-0/+3
Adds the updated `aon_timer` base as an unimplemented device. This is used by TockOS, patch ensures the guest doesn't hit load faults. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221025043335.339815-3-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv/opentitan: bump opentitanWilfred Mallawa1-8/+13
This patch updates the OpenTitan model to match the specified register layout as per [1]. Which is also the latest commit of OpenTitan supported by TockOS. Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes any references to Padctrl. Note: OpenTitan doc [2] has not yet specified much detail regarding this, except for a note that states `TODO: this section needs to be updated to reflect the pinmux/padctrl merger` [1] https://github.com/lowRISC/opentitan/blob/d072ac505f82152678d6e04be95c72b728a347b8/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h [2] https://docs.opentitan.org/hw/top_earlgrey/doc/design/ [3] https://docs.opentitan.org/hw/ip/pinmux/doc/#overview Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20221025043335.339815-2-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06i386: SGX: remove deprecated member of SGXInfoPaolo Bonzini1-9/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06KVM: remove support for kernel-irqchip=offPaolo Bonzini2-3/+3
-machine kernel-irqchip=off is broken for many guest OSes; kernel-irqchip=split is the replacement that works, so remove the deprecated support for the former. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06ide: Add "ide-cf" driver, a CompactFlash cardLubomir Rintel1-0/+32
This allows attaching IDE_CFATA device to an IDE bus. Behaves like a CompactFlash card in True IDE mode. Tested with: qemu-system-i386 \ -device driver=ide-cf,drive=cf,bus=ide.0 \ -drive id=cf,index=0,format=raw,if=none,file=cf.img Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Message-Id: <20221130120319.706885-1-lkundrak@v3.sk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06ide: Add 8-bit data modeLubomir Rintel1-10/+33
CompactFlash uses features 0x01 and 0x81 to enable/disable 8-bit data path. Implement them. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Message-Id: <20221130120238.706717-1-lkundrak@v3.sk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06hw: Reduce "qemu/accel.h" inclusionPhilippe Mathieu-Daudé1-0/+1
Move "qemu/accel.h" include from the heavily included "hw/boards.h" to hw/core/machine.c, the single file using the AccelState definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Message-Id: <20221130135641.85328-3-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-05Merge tag 'pull-target-arm-20230105' of ↵Peter Maydell11-197/+352
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Implement AArch32 ARMv8-R support * Add Cortex-R52 CPU * fix handling of HLT semihosting in system mode * hw/timer/ixm_epit: cleanup and fix bug in compare handling * target/arm: Coding style fixes * target/arm: Clean up includes * nseries: minor code cleanups * target/arm: align exposed ID registers with Linux * hw/arm/smmu-common: remove unnecessary inlines * i.MX7D: Handle GPT timers * i.MX7D: Connect IRQs to GPIO devices * i.MX6UL: Add a specific GPT timer instance * hw/net: Fix read of uninitialized memory in imx_fec # gpg: Signature made Thu 05 Jan 2023 16:43:18 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20230105' of https://git.linaro.org/people/pmaydell/qemu-arm: (34 commits) hw/net: Fix read of uninitialized memory in imx_fec. i.MX7D: Connect IRQs to GPIO devices. i.MX6UL: Add a specific GPT timer instance for the i.MX6UL i.MX7D: Compute clock frequency for the fixed frequency clocks. i.MX7D: Connect GPT timers to IRQ hw/arm/smmu-common: Avoid using inlined functions with external linkage hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope target/arm: align exposed ID registers with Linux hw/arm/nseries: Silent -Wmissing-field-initializers warning hw/arm/nseries: Constify various read-only arrays hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg target/arm: cleanup cpu includes target/arm: Remove unused includes from helper.c target/arm: Remove unused includes from m_helper.c target/arm: Fix checkpatch brace errors in helper.c target/arm: Fix checkpatch space errors in helper.c target/arm: Fix checkpatch comment style warnings in helper.c hw/timer/imx_epit: fix compare timer handling hw/timer/imx_epit: remove explicit fields cnt and freq hw/timer/imx_epit: factor out register write handlers ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05accel/tcg: Set cflags_next_tb in cpu_common_initfnRichard Henderson1-0/+1
While we initialize this value in cpu_common_reset, that isn't called during startup, so set it as well in init. This fixes -singlestep versus the very first TB. Fixes: 04f5b647ed07 ("accel/tcg: Handle -singlestep in curr_cflags") Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05hw/net: Fix read of uninitialized memory in imx_fec.Stephen Longfield1-4/+4
Size is used at lines 1088/1188 for the loop, which reads the last 4 bytes from the crc_ptr so it does need to get increased, however it shouldn't be increased before the buffer is passed to CRC computation, or the crc32 function will access uninitialized memory. This was pointed out to me by clg@kaod.org during the code review of a similar patch to hw/net/ftgmac100.c Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b Signed-off-by: Stephen Longfield <slongfield@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20221221183202.3788132-1-slongfield@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX7D: Connect IRQs to GPIO devices.Jean-Christophe Dubois1-1/+30
IRQs were not associated to the various GPIO devices inside i.MX7D. This patch brings the i.MX7D on par with i.MX6. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20221226101418.415170-1-jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX6UL: Add a specific GPT timer instance for the i.MX6ULJean-Christophe Dubois3-7/+26
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX7D: Compute clock frequency for the fixed frequency clocks.Jean-Christophe Dubois1-9/+40
CCM derived clocks will have to be added later. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX7D: Connect GPT timers to IRQJean-Christophe Dubois1-0/+10
So far the GPT timers were unable to raise IRQs to the processor. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/smmu-common: Avoid using inlined functions with external linkagePhilippe Mathieu-Daudé1-7/+6
When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)") and building with -Wall we get: hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline] hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, ^ static None of our code base require / use inlined functions with external linkage. Some places use internal inlining in the hot path. These two functions are certainly not in any hot path and don't justify any inlining, so these are likely oversights rather than intentional. Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scopePhilippe Mathieu-Daudé1-1/+1
This function is not used anywhere outside this file, so we can make the function "static void". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/nseries: Silent -Wmissing-field-initializers warningPhilippe Mathieu-Daudé1-6/+4
Silent when compiling with -Wextra: ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers] { NULL } ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221220142520.24094-4-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/nseries: Constify various read-only arraysPhilippe Mathieu-Daudé1-9/+9
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo argPhilippe Mathieu-Daudé2-3/+2
The pointed MouseTransformInfo structure is accessed read-only. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05Merge tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu into ↵Peter Maydell1-9/+9
staging Hi, "Host Memory Backends" and "Memory devices" queue ("mem"): - virtio-mem fixes - Use new MPOL_PREFERRED_MANY mbind() policy for memory backends if possible # gpg: Signature made Mon 02 Jan 2023 11:22:04 GMT # gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A # gpg: issuer "david@redhat.com" # gpg: Good signature from "David Hildenbrand <david@redhat.com>" [marginal] # gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full] # gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown] # Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A * tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu: hostmem: Honor multiple preferred nodes if possible virtio-mem: Fix typo in function name virtio-mem: Fix the iterator variable in a vmem->rdl_list loop virtio-mem: Fix the bitmap index of the section offset Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/timer/imx_epit: fix compare timer handlingAxel Heider1-72/+112
- fix #1263 for CR writes - rework compare time handling - The compare timer has to run even if CR.OCIEN is not set, as SR.OCIF must be updated. - The compare timer fires exactly once when the compare value is less than the current value, but the reload values is less than the compare value. - The compare timer will never fire if the reload value is less than the compare value. Disable it in this case. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> [PMM: fixed minor style nits] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/timer/imx_epit: remove explicit fields cnt and freqAxel Heider1-45/+28
The CNT register is a read-only register. There is no need to store it's value, it can be calculated on demand. The calculated frequency is needed temporarily only. Note that this is a migration compatibility break for all boards types that use the EPIT peripheral. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/timer/imx_epit: factor out register write handlersAxel Heider1-94/+113
Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-01-13 22:55:39 +0000