aboutsummaryrefslogtreecommitdiff
path: root/hw/xen
AgeCommit message (Collapse)AuthorFilesLines
2023-04-21pci: avoid accessing slot_reserved_mask directly outside of pci.cChuck Zmudzinski1-4/+3
This patch provides accessor functions as replacements for direct access to slot_reserved_mask according to the comment at the top of include/hw/pci/pci_bus.h which advises that data structures for PCIBus should not be directly accessed but instead be accessed using accessor functions in pci.h. Three accessor functions can conveniently replace all direct accesses of slot_reserved_mask. With this patch, the new accessor functions are used in hw/sparc64/sun4u.c and hw/xen/xen_pt.c and pci_bus.h is removed from the included header files of the same two files. No functional change intended. Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <b1b7f134883cbc83e455abbe5ee225c71aa0e8d0.1678888385.git.brchuckz@aol.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [sun4u]
2023-03-07hw/xen: Avoid crash when backend watch fires too earlyPaul Durrant1-7/+7
The xen-block code ends up calling aio_poll() through blkconf_geometry(), which means we see watch events during the indirect call to xendev_class->realize() in xen_device_realize(). Unfortunately this call is made before populating the initial frontend and backend device nodes in xenstore and hence xen_block_frontend_changed() (which is called from a watch event) fails to read the frontend's 'state' node, and hence believes the device is being torn down. This in-turn sets the backend state to XenbusStateClosed and causes the device to be deleted before it is fully set up, leading to the crash. By simply moving the call to xendev_class->realize() after the initial xenstore nodes are populated, this sorry state of affairs is avoided. Reported-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paul Durrant <pdurrant@amazon.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Build PV backend drivers for CONFIG_XEN_BUSDavid Woodhouse1-1/+4
Now that we have the redirectable Xen backend operations we can build the PV backends even without the Xen libraries. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Rename xen_common.h to xen_native.hDavid Woodhouse6-7/+7
This header is now only for native Xen code, not PV backends that may be used in Xen emulation. Since the toolstack libraries may depend on the specific version of Xen headers that they pull in (and will set the __XEN_TOOLS__ macro to enable internal definitions that they depend on), the rule is that xen_native.h (and thus the toolstack library headers) must be included *before* any of the headers in include/hw/xen/interface. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Add xenstore operations to allow redirection to internal emulationPaul Durrant7-363/+331
Signed-off-by: Paul Durrant <pdurrant@amazon.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Add foreignmem operations to allow redirection to internal emulationDavid Woodhouse1-0/+45
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Pass grant ref to gnttab unmap operationDavid Woodhouse3-5/+12
The previous commit introduced redirectable gnttab operations fairly much like-for-like, with the exception of the extra arguments to the ->open() call which were always NULL/0 anyway. This *changes* the arguments to the ->unmap() operation to include the original ref# that was mapped. Under real Xen it isn't necessary; all we need to do from QEMU is munmap(), then the kernel will release the grant, and Xen does the tracking/refcounting for the guest. When we have emulated grant tables though, we need to do all that for ourselves. So let's have the back ends keep track of what they mapped and pass it in to the ->unmap() method for us. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Add gnttab operations to allow redirection to internal emulationDavid Woodhouse4-219/+177
Move the existing code using libxengnttab to xen-operations.c and allow the operations to be redirected so that we can add emulation of grant table mapping for backend drivers. In emulation, mapping more than one grant ref to be virtually contiguous would be fairly difficult. The best way to do it might be to make the ram_block mappings actually backed by a file (shmem or a deleted file, perhaps) so that we can have multiple *shared* mappings of it. But that would be fairly intrusive. Making the backend drivers cope with page *lists* instead of expecting the mapping to be contiguous is also non-trivial, since some structures would actually *cross* page boundaries (e.g. the 32-bit blkif responses which are 12 bytes). So for now, we'll support only single-page mappings in emulation. Add a XEN_GNTTAB_OP_FEATURE_MAP_MULTIPLE flag to indicate that the native Xen implementation *does* support multi-page maps, and a helper function to query it. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Add evtchn operations to allow redirection to internal emulationDavid Woodhouse5-21/+93
The existing implementation calling into the real libxenevtchn moves to a new file hw/xen/xen-operations.c, and is called via a function table which in a subsequent commit will also be able to invoke the emulated event channel support. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-06hw/xen/xen_pt: fix uninitialized variableMarek Marczykowski-Górecki1-1/+1
xen_pt_config_reg_init() reads only that many bytes as the size of the register that is being initialized. It uses xen_host_pci_get_{byte,word,long} and casts its last argument to expected pointer type. This means for smaller registers higher bits of 'val' are not initialized. Then, the function fails if any of those higher bits are set. Fix this by initializing 'val' with zero. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-Id: <20230127050815.4155276-1-marmarek@invisiblethingslab.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-03-06xen/pt: reserve PCI slot 2 for Intel igd-passthruChuck Zmudzinski3-11/+77
Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus, as noted in docs/igd-assign.txt in the Qemu source code. Currently, when the xl toolstack is used to configure a Xen HVM guest with Intel IGD passthrough to the guest with the Qemu upstream device model, a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy a different slot. This problem often prevents the guest from booting. The only available workarounds are not good: Configure Xen HVM guests to use the old and no longer maintained Qemu traditional device model available from xenbits.xen.org which does reserve slot 2 for the Intel IGD or use the "pc" machine type instead of the "xenfv" machine type and add the xen platform device at slot 3 using a command line option instead of patching qemu to fix the "xenfv" machine type directly. The second workaround causes some degredation in startup performance such as a longer boot time and reduced resolution of the grub menu that is displayed on the monitor. This patch avoids that reduced startup performance when using the Qemu upstream device model for Xen HVM guests configured with the igd-passthru=on option. To implement this feature in the Qemu upstream device model for Xen HVM guests, introduce the following new functions, types, and macros: * XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE * XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS * typedef XenPTQdevRealize function pointer * XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2 * xen_igd_reserve_slot and xen_igd_clear_slot functions Michael Tsirkin: * Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK The new xen_igd_reserve_slot function uses the existing slot_reserved_mask member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using the xl toolstack with the gfx_passthru option enabled, which sets the igd-passthru=on option to Qemu for the Xen HVM machine type. The new xen_igd_reserve_slot function also needs to be implemented in hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, in which case it does nothing. The new xen_igd_clear_slot function overrides qdev->realize of the parent PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was created in hw/i386/pc_piix.c for the case when igd-passthru=on. Move the call to xen_host_pci_device_get, and the associated error handling, from xen_pt_realize to the new xen_igd_clear_slot function to initialize the device class and vendor values which enables the checks for the Intel IGD to succeed. The verification that the host device is an Intel IGD to be passed through is done by checking the domain, bus, slot, and function values as well as by checking that gfx_passthru is enabled, the device class is VGA, and the device vendor in Intel. Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-Id: <b1b4a21fe9a600b1322742dda55a40e9961daa57.1674346505.git.brchuckz@aol.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-03-01hw/xen: Subsume xen_be_register_common() into xen_be_init()David Woodhouse1-34/+22
Every caller of xen_be_init() checks and exits on error, then calls xen_be_register_common(). Just make xen_be_init() abort for itself and return void, and register the common devices too. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-01xen: add CONFIG_XEN_BUS and CONFIG_XEN_EMU options for Xen emulationDavid Woodhouse1-0/+3
The XEN_EMU option will cover core Xen support in target/, which exists only for x86 with KVM today but could theoretically also be implemented on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to run the gauntlet of struct layout compatibility, errno mapping, and the rest of that fui). It will also cover the support for architecture-independent grant table and event channel support which will be added in hw/i386/kvm/ (on the basis that the non-KVM support is very theoretical and making it not use KVM directly seems like gratuitous overengineering at this point). The XEN_BUS option is for the xenfv platform support, which will now be used both by XEN_EMU and by real Xen. The XEN option remains dependent on the Xen runtime libraries, and covers support for real Xen. Some code which currently resides under CONFIG_XEN will be moving to CONFIG_XEN_BUS over time as the direct dependencies on Xen runtime libraries are eliminated. The Xen PCI platform device will also reside under CONFIG_XEN_BUS. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé1-2/+2
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-11hw/xen: use G_GNUC_PRINTF/SCANF for various functionsDaniel P. Berrangé2-0/+2
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20221219130205.687815-3-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-08include/hw/pci: Break inclusion loop pci_bridge.h and cxl.hMarkus Armbruster1-1/+0
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other. Fortunately, breaking the loop is merely a matter of deleting unnecessary includes from headers, and adding them back in places where they are now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-2-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-05xen/pt: fix syntax error that causes FTBFS in some configurationsChuck Zmudzinski1-1/+1
When Qemu is built with --enable-xen and --disable-xen-pci-passthrough and the target os is linux, the build fails with: meson.build:3477:2: ERROR: File xen_pt_stub.c does not exist. Fixes: 582ea95f5f93 ("meson: convert hw/xen") Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <5f1342a13c09af77b1a7b0aeaba5955bcea89731.1667242033.git.brchuckz@aol.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-09-27hw/xen: set pci Atomic Ops requests for passthrough deviceRuili Ji1-2/+2
Make guest os access pci device control 2 reg for passthrough device as struct XenPTRegInfo described in the file hw/xen/xen_pt.h. /* reg read only field mask (ON:RO/ROS, OFF:other) */ uint32_t ro_mask; /* reg emulate field mask (ON:emu, OFF:passthrough) */ uint32_t emu_mask; Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1196 Signed-off-by: Aaron Liu <Aaron.Liu@amd.com> Signed-off-by: Ruili Ji <ruili.ji@amd.com> Message-ID: <BL1PR12MB599341DC55BA53FE588DE14E9B7E9@BL1PR12MB5993.namprd12.prod.outlook.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2022-07-05xen/pass-through: don't create needless register groupChuck Zmudzinski1-5/+9
Currently we are creating a register group for the Intel IGD OpRegion for every device we pass through, but the XEN_PCI_INTEL_OPREGION register group is only valid for an Intel IGD. Add a check to make sure the device is an Intel IGD and a check that the administrator has enabled gfx_passthru in the xl domain configuration. Require both checks to be true before creating the register group. Use the existing is_igd_vga_passthrough() function to check for a graphics device from any vendor and that the administrator enabled gfx_passthru in the xl domain configuration, but further require that the vendor be Intel, because only Intel IGD devices have an Intel OpRegion. These are the same checks hvmloader and libxl do to determine if the Intel OpRegion needs to be mapped into the guest's memory. Also, move the comment about trapping 0xfc for the Intel OpRegion where it belongs after applying this patch. Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <c76dff6369ccf2256bd9eed5141da1db767293d2.1656480662.git.brchuckz@aol.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2022-07-05xen/pass-through: merge emulated bits correctlyChuck Zmudzinski1-5/+6
In xen_pt_config_reg_init(), there is an error in the merging of the emulated data with the host value. With the current Qemu, instead of merging the emulated bits with the host bits as defined by emu_mask, the emulated bits are merged with the host bits as defined by the inverse of emu_mask. In some cases, depending on the data in the registers on the host, the way the registers are setup, and the initial values of the emulated bits, the end result will be that the register is initialized with the wrong value. To correct this error, use the XEN_PT_MERGE_VALUE macro to help ensure the merge is done correctly. This correction is needed to resolve Qemu project issue #1061, which describes the failure of Xen HVM Linux guests to boot in certain configurations with passed through PCI devices, that is, when this error disables instead of enables the PCI_STATUS_CAP_LIST bit of the PCI_STATUS register of a passed through PCI device, which in turn disables the MSI-X capability of the device in Linux guests with the end result being that the Linux guest never completes the boot process. Fixes: 2e87512eccf3 ("xen/pt: Sync up the dev.config and data values") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1061 Buglink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=988333 Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <e4392535d8e5266063dc5461d0f1d301e3dd5951.1656522217.git.brchuckz@aol.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2022-05-12hw/xen/xen_pt: Resolve igd_passthrough_isa_bridge_create() indirectionBernhard Beschow3-13/+6
Now that igd_passthrough_isa_bridge_create() is implemented within the xen context it may use Xen* data types directly and become xen_igd_passthrough_isa_bridge_create(). This resolves an indirection. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20220326165825.30794-3-shentey@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12hw/xen/xen_pt: Confine igd-passthrough-isa-bridge to XENBernhard Beschow3-1/+120
igd-passthrough-isa-bridge is only requested in xen_pt but was implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc which is hereby resolved. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20220326165825.30794-2-shentey@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-28meson: remove CONFIG_XEN_PCI_PASSTHROUGH from config-target.hPaolo Bonzini1-8/+12
CONFIG_XEN_PCI_PASSTHROUGH is just a global configuration option; it is never used in the source files, so there is no need to put CONFIG_XEN_PCI_PASSTHROUGH in config-target.h or even in config-host.h. This inaccuracy was copied over from the configure script in commit 8a19980e3f ("configure: move accelerator logic to meson", 2020-10-03). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20util/log: Remove qemu_log_flushRichard Henderson1-1/+0
All uses flush output immediately before or after qemu_log_unlock. Instead of a separate call, move the flush into qemu_log_unlock. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
2022-04-20hw/xen: Split out xen_pv_output_msgRichard Henderson1-20/+24
Do not replicate the individual logging statements. Use qemu_log_trylock/unlock instead of qemu_log directly. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-9-richard.henderson@linaro.org>
2022-03-22Replace GCC_FMT_ATTR with G_GNUC_PRINTFMarc-André Lureau1-1/+1
One less qemu-specific macro. It also helps to make some headers/units only depend on glib, and thus moved in standalone projects eventually. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
2022-01-12aio-posix: split poll check from ready handlerStefan Hajnoczi1-3/+3
Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-11-01pci: Export pci_for_each_device_under_bus*()Peter Xu1-2/+2
They're actually more commonly used than the helper without _under_bus, because most callers do have the pci bus on hand. After exporting we can switch a lot of the call sites to use these two helpers. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20211028043129.38871-3-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-15softmmu/qdev-monitor: add error handling in qdev_set_idDamien Hedde1-1/+2
qdev_set_id() is mostly used when the user adds a device (using -device cli option or device_add qmp command). This commit adds an error parameter to handle the case where the given id is already taken. Also document the function and add a return value in order to be able to capture success/failure: the function now returns the id in case of success, or NULL in case of failure. The commit modifies the 2 calling places (qdev-monitor and xen-legacy-backend) to add the error object parameter. Note that the id is, right now, guaranteed to be unique because all ids came from the "device" QemuOptsList where the id is used as key. This addition is a preparation for a future commit which will relax the uniqueness. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-10-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-09-30Merge remote-tracking branch ↵Peter Maydell2-2/+2
'remotes/pmaydell/tags/pull-target-arm-20210930' into staging target-arm queue: * allwinner-h3: Switch to SMC as PSCI conduit * arm: tcg: Adhere to SMCCC 1.3 section 5.2 * xlnx-zcu102, xlnx-versal-virt: Support BBRAM and eFUSE devices * gdbstub related code cleanups * Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML * Use _init vs _new convention in bus creation function names * sabrelite: Connect SPI flash CS line to GPIO3_19 # gpg: Signature made Thu 30 Sep 2021 16:11:20 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210930: (22 commits) hw/arm: sabrelite: Connect SPI flash CS line to GPIO3_19 ide: Rename ide_bus_new() to ide_bus_init() qbus: Rename qbus_create() to qbus_new() qbus: Rename qbus_create_inplace() to qbus_init() pci: Rename pci_root_bus_new_inplace() to pci_root_bus_init() ipack: Rename ipack_bus_new_inplace() to ipack_bus_init() scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named() target/arm: Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML target/arm: Move gdbstub related code out of helper.c target/arm: Fix coding style issues in gdbstub code in helper.c configs: Don't include 32-bit-only GDB XML in aarch64 linux configs docs/system/arm: xlnx-versal-virt: BBRAM and eFUSE Usage hw/arm: xlnx-zcu102: Add Xilinx eFUSE device hw/arm: xlnx-zcu102: Add Xilinx BBRAM device hw/arm: xlnx-versal-virt: Add Xilinx eFUSE device hw/arm: xlnx-versal-virt: Add Xilinx BBRAM device hw/nvram: Introduce Xilinx battery-backed ram hw/nvram: Introduce Xilinx ZynqMP eFuse device hw/nvram: Introduce Xilinx Versal eFuse device hw/nvram: Introduce Xilinx eFuse QOM ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30memory: Name all the memory listenersPeter Xu1-0/+2
Provide a name field for all the memory listeners. It can be used to identify which memory listener is which. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210817013553.30584-2-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell2-2/+2
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth1-1/+0
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/sysbus.h if it is not necessaryThomas Huth1-1/+0
Many files include hw/sysbus.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210327082804.2259480-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-05pci: add romsize propertyPaolo Bonzini1-2/+12
This property can be useful for distros to set up known-good ROM sizes for migration purposes. The VM will fail to start if the ROM is too large, and migration compatibility will not be broken if the ROM is too small. Note that even though romsize is a uint32_t, it has to be between 1 (because empty ROM files are not accepted, and romsize must be greater than the file) and 2^31 (because values above are not powers of two and are rejected). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20201218182736.1634344-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210203131828.156467-3-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Acked-by: Laszlo Ersek <lersek@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost1-0/+1
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-13hw/xen: Don't use '#' flag of printf formatXinhao Zhang3-16/+16
Fix code style. Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201104133709.3326630-1-zhangxinhao1@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-19xen-bus: reduce scope of backend watchPaul Durrant2-8/+43
Currently a single watch on /local/domain/X/backend is registered by each QEMU process running in service domain X (where X is usually 0). The purpose of this watch is to ensure that QEMU is notified when the Xen toolstack creates a new device backend area. Such a backend area is specific to a single frontend area created for a specific guest domain and, since each QEMU process is also created to service a specfic guest domain, it is unnecessary and inefficient to notify all QEMU processes. Only the QEMU process associated with the same guest domain need receive the notification. This patch re-factors the watch registration code such that notifications are targetted appropriately. Reported-by: Jerome Leseinne <jerome.leseinne@gmail.com> Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20201001081500.1026-1-paul@xen.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost1-3/+1
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost1-2/+2
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost1-0/+1
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/xenMarc-André Lureau2-7/+20
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-0/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-13osdep.h: Always include <sys/signal.h> if it existsDavid CARLIER1-1/+0
Regularize our handling of <sys/signal.h>: currently we include it in osdep.h, but only for OpenBSD, and we include it without an ifdef guard in a couple of C files. This causes problems for Haiku, which doesn't have that header. Instead, check in configure whether sys/signal.h exists, and if it does then always include it from osdep.h. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-5-peter.maydell@linaro.org [PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-11Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20200710' into ↵Peter Maydell1-2/+2
staging xen patches Fixes following harden checks in qdev. # gpg: Signature made Fri 10 Jul 2020 14:05:46 BST # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: issuer "anthony.perard@citrix.com" # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * remotes/aperard/tags/pull-xen-20200710: xen: cleanup unrealized flash devices xen: Fix xen-legacy-backend qdev types Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-10xen: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy5-93/+75
If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-10error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster1-2/+1
Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
generated by cgit v1.1 at 2024-12-25 21:38:32 +0000