aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio/vhost-user.c
AgeCommit message (Collapse)AuthorFilesLines
2021-03-22vhost-user: Monitor slave channel in vhost_user_read()Greg Kurz1-3/+32
Now that everything is in place, have the nested event loop to monitor the slave channel. The source in the main event loop is destroyed and recreated to ensure any pending even for the slave channel that was previously detected is purged. This guarantees that the main loop wont invoke slave_read() based on an event that was already handled by the nested loop. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312092212.782255-7-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-03-22vhost-user: Introduce nested event loop in vhost_user_read()Greg Kurz1-5/+60
A deadlock condition potentially exists if a vhost-user process needs to request something to QEMU on the slave channel while processing a vhost-user message. This doesn't seem to affect any vhost-user implementation so far, but this is currently biting the upcoming enablement of DAX with virtio-fs. The issue is being observed when the guest does an emergency reboot while a mapping still exits in the DAX window, which is very easy to get with a busy enough workload (e.g. as simulated by blogbench [1]) : - QEMU sends VHOST_USER_GET_VRING_BASE to virtiofsd. - In order to complete the request, virtiofsd then asks QEMU to remove the mapping on the slave channel. All these dialogs are synchronous, hence the deadlock. As pointed out by Stefan Hajnoczi: When QEMU's vhost-user master implementation sends a vhost-user protocol message, vhost_user_read() does a "blocking" read during which slave_fd is not monitored by QEMU. The natural solution for this issue is an event loop. The main event loop cannot be nested though since we have no guarantees that its fd handlers are prepared for re-entrancy. Introduce a new event loop that only monitors the chardev I/O for now in vhost_user_read() and push the actual reading to a one-shot handler. A subsequent patch will teach the loop to monitor and process messages from the slave channel as well. [1] https://github.com/jedisct1/Blogbench Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312092212.782255-6-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-03-22vhost-user: Convert slave channel to QIOChannelSocketGreg Kurz1-60/+39
The slave channel is implemented with socketpair() : QEMU creates the pair, passes one of the socket to virtiofsd and monitors the other one with the main event loop using qemu_set_fd_handler(). In order to fix a potential deadlock between QEMU and a vhost-user external process (e.g. virtiofsd with DAX), we want to be able to monitor and service the slave channel while handling vhost-user requests. Prepare ground for this by converting the slave channel to be a QIOChannelSocket. This will make monitoring of the slave channel as simple as calling qio_channel_add_watch_source(). Since the connection is already established between the two sockets, only incoming I/O (G_IO_IN) and disconnect (G_IO_HUP) need to be serviced. This also allows to get rid of the ancillary data parsing since QIOChannelSocket can do this for us. Note that the MSG_CTRUNC check is dropped on the way because QIOChannelSocket ignores this case. This isn't a problem since slave_read() provisions space for 8 file descriptors, but affected vhost-user slave protocol messages generally only convey one. If for some reason a buggy implementation passes more file descriptors, no need to break the connection, just like we don't break it if some other type of ancillary data is received : this isn't explicitely violating the protocol per-se so it seems better to ignore it. The current code errors out on short reads and writes. Use the qio_channel_*_all() variants to address this on the way. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312092212.782255-5-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-03-22vhost-user: Factor out duplicated slave_fd teardown codeGreg Kurz1-9/+10
Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312092212.782255-4-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-03-22vhost-user: Fix double-close on slave_read() error pathGreg Kurz1-8/+3
Some message types, e.g. VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG, can convey file descriptors. These must be closed before returning from slave_read() to avoid being leaked. This can currently be done in two different places: [1] just after the request has been processed [2] on the error path, under the goto label err: These path are supposed to be mutually exclusive but they are not actually. If the VHOST_USER_NEED_REPLY_MASK flag was passed and the sending of the reply fails, both [1] and [2] are performed with the same descriptor values. This can potentially cause subtle bugs if one of the descriptor was recycled by some other thread in the meantime. This code duplication complicates rollback for no real good benefit. Do the closing in a unique place, under a new fdcleanup: goto label at the end of the function. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312092212.782255-3-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-03-22vhost-user: Drop misleading EAGAIN checks in slave_read()Greg Kurz1-3/+3
slave_read() checks EAGAIN when reading or writing to the socket fails. This gives the impression that the slave channel is in non-blocking mode, which is certainly not the case with the current code base. And the rest of the code isn't actually ready to cope with non-blocking I/O. Just drop the checks everywhere in this function for the sake of clarity. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312092212.782255-2-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-11-12vhost-user: fix VHOST_USER_ADD/REM_MEM_REG truncationStefan Hajnoczi1-3/+2
QEMU currently truncates the mmap_offset field when sending VHOST_USER_ADD_MEM_REG and VHOST_USER_REM_MEM_REG messages. The struct layout looks like this: typedef struct VhostUserMemoryRegion { uint64_t guest_phys_addr; uint64_t memory_size; uint64_t userspace_addr; uint64_t mmap_offset; } VhostUserMemoryRegion; typedef struct VhostUserMemRegMsg { uint32_t padding; /* WARNING: there is a 32-bit hole here! */ VhostUserMemoryRegion region; } VhostUserMemRegMsg; The payload size is calculated as follows when sending the message in hw/virtio/vhost-user.c: msg->hdr.size = sizeof(msg->payload.mem_reg.padding) + sizeof(VhostUserMemoryRegion); This calculation produces an incorrect result of only 36 bytes. sizeof(VhostUserMemRegMsg) is actually 40 bytes. The consequence of this is that the final field, mmap_offset, is truncated. This breaks x86_64 TCG guests on s390 hosts. Other guest/host combinations may get lucky if either of the following holds: 1. The guest memory layout does not need mmap_offset != 0. 2. The host is little-endian and mmap_offset <= 0xffffffff so the truncation has no effect. Fix this by extending the existing 32-bit padding field to 64-bit. Now the padding reflects the actual compiler padding. This can be verified using pahole(1). Also document the layout properly in the vhost-user specification. The vhost-user spec did not document the exact layout. It would be impossible to implement the spec without looking at the QEMU source code. Existing vhost-user frontends and device backends continue to work after this fix has been applied. The only change in the wire protocol is that QEMU now sets hdr.size to 40 instead of 36. If a vhost-user implementation has a hardcoded size check for 36 bytes, then it will fail with new QEMUs. Both QEMU and DPDK/SPDK don't check the exact payload size, so they continue to work. Fixes: f1aeb14b0809e313c74244d838645ed25e85ea63 ("Transmit vhost-user memory regions individually") Cc: Raphael Norwitz <raphael.norwitz@nutanix.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201109174355.1069147-1-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: f1aeb14b0809 ("Transmit vhost-user memory regions individually") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2020-09-01hw/virtio/vhost-user:Remove dead assignment in scrub_shadow_regions()Chen Qun1-1/+1
Clang static code analyzer show warning: hw/virtio/vhost-user.c:606:9: warning: Value stored to 'mr' is never read mr = vhost_user_get_mr_data(reg->userspace_addr, &offset, &fd); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200827110311.164316-6-kuhn.chenqun@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-27Fix vhost-user buffer over-read on ram hot-unplugRaphael Norwitz1-1/+1
The VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS vhost-user protocol feature introduced a shadow-table, used by the backend to dynamically determine how a vdev's memory regions have changed since the last vhost_user_set_mem_table() call. On hot-remove, a memmove() operation is used to overwrite the removed shadow region descriptor(s). The size parameter of this memmove was off by 1 such that if a VM with a backend supporting the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS filled it's shadow-table (by performing the maximum number of supported hot-add operatons) and attempted to remove the last region, Qemu would read an out of bounds value and potentially crash. This change fixes the memmove() bounds such that this erroneous read can never happen. Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1594799958-31356-1-git-send-email-raphael.norwitz@nutanix.com> Fixes: f1aeb14b0809 ("Transmit vhost-user memory regions individually") Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-24Stop vhost-user sending uninitialized mmap_offsetsRaphael Norwitz1-6/+6
Prior to this change, the vhost_user_fill_msg_region function filled out all elements of the VhostUserMemoryRegion struct except the mmap_offset. This function is often called on uninitialized structs, which are then copied into VHOST_USER_SET_MEM_TABLE and VHOST_USER_ADD/REM_MEM_REG messages. In some cases, where the mmap_offset was not needed, it was left uninitialized, causing QEMU to send the backend uninitialized data, which Coverity flagged as a series of issues. This change augments the vhost_user_fill_msg_region API, adding a mmap_offset paramenter, forcing the caller to initialize mmap_offset. Fixes: ece99091c2d0aeb23734289a50ef2ff4e0a08929 Fixes: f1aeb14b0809e313c74244d838645ed25e85ea63 Reported-by: Coverity (CIDs 1429802, 1429803 and 1429804) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1592650156-25845-1-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-06-12Lift max memory slots limit imposed by vhost-userRaphael Norwitz1-19/+37
Historically, sending all memory regions to vhost-user backends in a single message imposed a limitation on the number of times memory could be hot-added to a VM with a vhost-user device. Now that backends which support the VHOST_USER_PROTOCOL_F_CONFIGURE_SLOTS send memory regions individually, we no longer need to impose this limitation on devices which support this feature. With this change, VMs with a vhost-user device which supports the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS can support a configurable number of memory slots, up to the maximum allowed by the target platform. Existing backends which do not support VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Suggested-by: Mike Cui <cui@nutanix.com> Message-Id: <1588533678-23450-6-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-12Transmit vhost-user memory regions individuallyRaphael Norwitz1-72/+438
With this change, when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS protocol feature has been negotiated, Qemu no longer sends the backend all the memory regions in a single message. Rather, when the memory tables are set or updated, a series of VHOST_USER_ADD_MEM_REG and VHOST_USER_REM_MEM_REG messages are sent to transmit the regions to map and/or unmap instead of sending send all the regions in one fixed size VHOST_USER_SET_MEM_TABLE message. The vhost_user struct maintains a shadow state of the VM’s memory regions. When the memory tables are modified, the vhost_user_set_mem_table() function compares the new device memory state to the shadow state and only sends regions which need to be unmapped or mapped in. The regions which must be unmapped are sent first, followed by the new regions to be mapped in. After all the messages have been sent, the shadow state is set to the current virtual device state. Existing backends which do not support VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Suggested-by: Mike Cui <cui@nutanix.com> Message-Id: <1588533678-23450-5-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-12Add VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTSRaphael Norwitz1-2/+47
This change introduces a new feature to the vhost-user protocol allowing a backend device to specify the maximum number of ram slots it supports. At this point, the value returned by the backend will be capped at the maximum number of ram slots which can be supported by vhost-user, which is currently set to 8 because of underlying protocol limitations. The returned value will be stored inside the VhostUserState struct so that on device reconnect we can verify that the ram slot limitation has not decreased since the last time the device connected. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Message-Id: <1588533678-23450-4-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-09Add vhost-user helper to get MemoryRegion dataRaphael Norwitz1-10/+15
When setting the memory tables, qemu uses a memory region's userspace address to look up the region's MemoryRegion struct. Among other things, the MemoryRegion contains the region's offset and associated file descriptor, all of which need to be sent to the backend. With VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS, this logic will be needed in multiple places, so before feature support is added it should be moved to a helper function. This helper is also used to simplify the vhost_user_can_merge() function. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-3-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-09Add helper to populate vhost-user message regionsRaphael Norwitz1-6/+12
When setting vhost-user memory tables, memory region descriptors must be copied from the vhost_dev struct to the vhost-user message. To avoid duplicating code in setting the memory tables, we should use a helper to populate this field. This change adds this helper. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-05-04Refactor vhost_user_set_mem_table functionsRaphael Norwitz1-76/+67
vhost_user_set_mem_table() and vhost_user_set_mem_table_postcopy() have gotten convoluted, and have some identical code. This change moves the logic populating the VhostUserMemory struct and fds array from vhost_user_set_mem_table() and vhost_user_set_mem_table_postcopy() to a new function, vhost_user_fill_set_mem_table_msg(). No functionality is impacted. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Message-Id: <1585132506-13316-1-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-27Fixed assert in vhost_user_set_mem_table_postcopyRaphael Norwitz1-1/+1
The current vhost_user_set_mem_table_postcopy() implementation populates each region of the VHOST_USER_SET_MEM_TABLE message without first checking if there are more than VHOST_MEMORY_MAX_NREGIONS already populated. This can cause memory corruption if too many regions are added to the message during the postcopy step. This change moves an existing assert up such that attempting to construct a VHOST_USER_SET_MEM_TABLE message with too many memory regions will gracefully bring down qemu instead of corrupting memory. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Message-Id: <1579143426-18305-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-27vhost-user: only set slave channel for first vqAdrian Moreno1-3/+5
When multiqueue is enabled, a vhost_dev is created for each queue pair. However, only one slave channel is needed. Fixes: 4bbeeba023f2 (vhost-user: add slave-req-fd support) Cc: marcandre.lureau@redhat.com Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Message-Id: <20200121214553.28459-1-amorenoz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-23vhost-user: Print unexpected slave message typesDr. David Alan Gilbert1-1/+1
When we receive an unexpected message type on the slave fd, print the type. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-05vhost-user: add VHOST_USER_RESET_DEVICE to reset devicesRaphael Norwitz1-1/+7
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user backend. Disabling all rings, and resetting all internal state, ready for the backend to be reinitialized. A backend has to report it supports this features with the VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does so, the new message is used instead of sending a RESET_OWNER which has had inconsistent implementations. Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-29vhost-user: add vhost_user_gpu_set_socket()Marc-André Lureau1-0/+11
Add a new vhost-user message to give a unix socket to a vhost-user backend for GPU display updates. Back when I started that work, I added a new GPU channel because the vhost-user protocol wasn't bidirectional. Since then, there is a vhost-user-slave channel for the slave to send requests to the master. We could extend it with GPU messages. However, the GPU protocol is quite orthogonal to vhost-user, thus I chose to have a new dedicated channel. See vhost-user-gpu.rst for the protocol details. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-12vhost-user: Support transferring inflight buffer between qemu and backendXie Yongji1-0/+107
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared buffer between qemu and backend. Firstly, qemu uses VHOST_USER_GET_INFLIGHT_FD to get the shared buffer from backend. Then qemu should send it back through VHOST_USER_SET_INFLIGHT_FD each time we start vhost-user. This shared buffer is used to track inflight I/O by backend. Qemu should retrieve a new one when vm reset. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Chai Wen <chaiwen@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-2-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: split vhost_user_read()Marc-André Lureau1-8/+19
Split vhost_user_read(), so only header can be read with vhost_user_read_header(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190308140454.32437-8-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: wrap some read/write with retry handlingMarc-André Lureau1-3/+12
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190308140454.32437-6-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: simplify vhost_user_init/vhost_user_cleanupMarc-André Lureau1-4/+12
Take a VhostUserState* that can be pre-allocated, and initialize it with the associated chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21vhost: restrict Linux dependency to kernel vhostPaolo Bonzini1-1/+12
vhost-user does not depend on Linux; it can run on any POSIX system. Restrict vhost-kernel to Linux in hw/virtio/vhost-backend.c, everything else can be compiled on all POSIX systems. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1543851204-41186-4-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1550165756-21617-4-git-send-email-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14vhost-user: fix ioeventfd_enabledLi Qiang1-1/+1
Currently, the vhost-user-test assumes the eventfd is available. However it's not true because the accel is qtest. So the 'vhost_set_vring_file' will not add fds to the msg and the server side of vhost-user-test will be broken. The bug is in 'ioeventfd_enabled'. We should make this function return true if not using kvm accel. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-10-11vhost-user: Don't ask for reply on postcopy mem table setIlya Maximets1-12/+1
According to documentation, NEED_REPLY_MASK should not be set for VHOST_USER_SET_MEM_TABLE request in postcopy mode. This restriction was mistakenly applied to 'reply_supported' variable, which is local and used only for non-postcopy case. CC: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: 9bb38019942c ("vhost+postcopy: Send address back to qemu") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Message-Id: <20181002140947.4107-1-i.maximets@samsung.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-11vhost-user: Fix userfaultfd leakIlya Maximets1-0/+7
'fd' received from the vhost side is never freed. Also, everything (including 'postcopy_listen' state) should be cleaned up on vhost cleanup. Fixes: 46343570c06e ("vhost+postcopy: Wire up POSTCOPY_END notify") Fixes: f82c11165ffa ("vhost+postcopy: Register shared ufd with postcopy") Cc: qemu-stable@nongnu.org Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Message-Id: <20181008160536.6332-3-i.maximets@samsung.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-05-24vhost-user: support registering external host notifiersTiwei Bie1-0/+113
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER. With this feature negotiated, vhost-user backend can register memory region based host notifiers. And it will allow the guest driver in the VM to notify the hardware accelerator at the vhost-user backend directly. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost-user: introduce shared vhost-user stateTiwei Bie1-9/+22
When multi queue is enabled e.g. for a virtio-net device, each queue pair will have a vhost_dev, and the only thing shared between vhost devs currently is the chardev. This patch introduces a vhost-user state structure which will be shared by all vhost devs of the same virtio device. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost-user: allow slave to send fds via slave channelTiwei Bie1-10/+17
Introduce VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD protocol feature to allow slave to send at most 8 descriptors in each message to master via ancillary data using the slave channel. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost: allow backends to filter memory sectionsTiwei Bie1-0/+11
This patch introduces a vhost op for vhost backends to allow them to filter the memory sections that they can handle. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23hw/virtio: Fix brace Werror with clang 6.0.0Richard Henderson1-1/+1
The warning is hw/virtio/vhost-user.c:1319:26: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces] VhostUserMsg msg = { 0 }; ^ {} While the original code is correct, and technically exactly correct as per ISO C89, both GCC and Clang support plain empty set of braces as an extension. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23vhost-user+postcopy: Use qemu_set_nonblockDr. David Alan Gilbert1-1/+1
Use qemu_set_nonblock rather than a simple fcntl; cleaner and I have no reason to change other flags. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23vhost-user: support receiving file descriptors in slave_readTiwei Bie1-1/+40
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-04-09vhost-user: back SET/GET_CONFIG requests with a protocol featureMaxime Coquelin1-0/+22
Without a dedicated protocol feature, QEMU cannot know whether the backend can handle VHOST_USER_SET_CONFIG and VHOST_USER_GET_CONFIG messages. This patch adds a protocol feature that is only advertised by QEMU if the device implements the config ops. Vhost user init fails if the device support the feature but the backend doesn't. The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG requests if the protocol feature has been negotiated. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Changpeng Liu <changpeng.liu@intel.com>
2018-03-20vhost+postcopy: Wire up POSTCOPY_END notifyDr. David Alan Gilbert1-0/+34
Wire up a call to VHOST_USER_POSTCOPY_END message to the vhost clients right before we ask the listener thread to shutdown. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost-user: Add VHOST_USER_POSTCOPY_END messageDr. David Alan Gilbert1-0/+1
This message is sent just before the end of postcopy to get the client to stop using userfault since we wont respond to any more requests. It should close userfaultfd so that any other pages get mapped to the backing file automatically by the kernel, since at this point we know we've received everything. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Add vhost wakerDr. David Alan Gilbert1-0/+30
Register a waker function in vhost-user code to be notified when pages arrive or requests to previously mapped pages get requested. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Resolve client addressDr. David Alan Gilbert1-1/+30
Resolve fault addresses read off the clients UFD into RAMBlock and offset, and call back to the postcopy code to ask for the page. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Stash RAMBlock and offsetDr. David Alan Gilbert1-0/+34
Stash the RAMBlock and offset for later use looking up addresses. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Send address back to qemuDr. David Alan Gilbert1-2/+65
We need a better way, but at the moment we need the address of the mappings sent back to qemu so it can interpret the messages on the userfaultfd it reads. This is done as a 3 stage set: QEMU -> client set_mem_table mmap stuff, get addresses client -> qemu here are the addresses qemu -> client OK - now you can use them That ensures that qemu has registered the new addresses in it's userfault code before the client starts accessing them. Note: We don't ask for the default 'ack' reply since we've got our own. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20postcopy+vhost-user: Split set_mem_table for postcopyDr. David Alan Gilbert1-2/+75
Split the set_mem_table routines in both qemu and libvhost-user because the postcopy versions are going to be quite different once changes in the later patches are added. However, this patch doesn't produce any functional change, just the split. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Transmit 'listen' to slaveDr. David Alan Gilbert1-0/+34
Notify the vhost-user slave on reception of the 'postcopy-listen' event from the source. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Register shared ufd with postcopyDr. David Alan Gilbert1-1/+19
Register the UFD that comes in as the response to the 'advise' method with the postcopy code. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' messageDr. David Alan Gilbert1-0/+48
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE message on an incoming advise. Later patches will fill in the behaviour/contents of the message. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20postcopy: Add vhost-user flag for postcopy and check itDr. David Alan Gilbert1-1/+40
Add a vhost feature flag for postcopy support, and use the postcopy notifier to check it before allowing postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev-vhost-user: add crypto session handlerGonglei1-0/+104
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side support crypto operation in cryptodev host-user backend. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-12-29 11:23:04 +0000