aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio-serial-bus.c
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18virtio: make virtio device's structures public.KONRAD Frederic1-41/+0
These structures must be made public to avoid two memory allocations for refactored virtio devices. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-id: 1363624648-16906-2-git-send-email-fred.konrad@greensocs.com Changes V4 <- V3: * Rebased on current git. Changes V3 <- V2: * Style correction spotted by Andreas (virtio-scsi.h). * Style correction for virtio-net.h. Changes V2 <- V1: * Move the dataplane include into the header (virtio-blk). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-10Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-2/+2
* bonzini/hw-dirs: sh: move files referencing CPU to hw/sh4/ ppc: move more files to hw/ppc ppc: move files referencing CPU to hw/ppc/ m68k: move files referencing CPU to hw/m68k/ i386: move files referencing CPU to hw/i386/ arm: move files referencing CPU to hw/arm/ hw: move boards and other isolated files to hw/ARCH ppc: express FDT dependency of pSeries and e500 boards via default-configs/ build: always link device_tree.o into emulators if libfdt available hw: include hw header files with full paths ppc: do not use ../ in include files vt82c686: vt82c686 is not a PCI host bridge virtio-9p: remove PCI dependencies from hw/9pfs/ virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX hw: move device-hotplug.o to toplevel, compile it once hw: move qdev-monitor.o to toplevel directory hw: move fifo.[ch] to libqemuutil hw: move char backends to backends/ Conflicts: backends/baum.c backends/msmouse.c hw/a15mpcore.c hw/arm/Makefile.objs hw/arm/pic_cpu.c hw/dataplane/event-poll.c hw/dataplane/virtio-blk.c include/char/baum.h include/char/msmouse.h qemu-char.c vl.c Resolve conflicts caused by header movements. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08virtio-serial: make flow control explicit in virtio-consoleAmit Shah1-18/+1
virtio-console.c used to return a value less than the number of bytes asked to be written out to a chardev backend in case the backend is not writable. virtio-serial-bus.c then implicitly enabled flow control for that port. Make this explicit instead. Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: f5ec50b068c25422256e499cf4adc06d353bf394.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-01hw: include hw header files with full pathsPaolo Bonzini1-2/+2
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-10Make all static TypeInfos constAndreas Färber1-1/+1
Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19Merge remote-tracking branch 'bonzini/header-dirs' into stagingAnthony Liguori1-3/+3
* bonzini/header-dirs: (45 commits) janitor: move remaining public headers to include/ hw: move executable format header files to hw/ fpu: move public header file to include/fpu softmmu: move remaining include files to include/ subdirectories softmmu: move include files to include/sysemu/ misc: move include files to include/qemu/ qom: move include files to include/qom/ migration: move include files to include/migration/ monitor: move include files to include/monitor/ exec: move include files to include/exec/ block: move include files to include/block/ qapi: move include files to include/qobject/ janitor: add guards to headers qapi: make struct Visitor opaque qapi: remove qapi/qapi-types-core.h qapi: move inclusions of qemu-common.h from headers to .c files ui: move files to ui/ and include/ui/ qemu-ga: move qemu-ga files to qga/ net: reorganize headers net: move net.c to net/ ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-18virtio-serial-bus: assert port is non-null in remove_port()Amit Shah1-0/+6
remove_port() is called from qdev's unplug callback, and we're certain the port will be found in our list of ports. Adding an assert() documents this. This was flagged by Coverity, fix suggested by Markus. CC: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-12-18virtio-serial-bus: send_control_msg() should not deal with cpktsAmit Shah1-21/+18
Stuff the cpkt before calling send_control_msg(). This function should not be concerned about contents of the buffer it receives. A few code refactorings recently have made making this change easier than earlier. Coverity and clang have flagged this code several times in the past (cpkt->id not set before send_control_event() passed it on to send_control_msg()). This will finally eliminate the false-positive. CC: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-12-13virtio-serial: delete timer if active during exitAmit Shah1-0/+1
The post_load timer was being freed, but not deleted. This could cause problems when the timer is armed, but the device is hot-unplugged before the callback is executed. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-12-13virtio-serial: allocate post_load only at load-timeAmit Shah1-25/+38
This saves us a few bytes in the VirtIOSerial struct. Not a big savings, but since the entire structure is used only during a short while after migration, it's helpful to keep the struct cleaner and smaller. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-12-13virtio-serial: move active ports loading to separate functionAmit Shah1-41/+55
The virtio_serial_load() function became too big, split the code that gets the port info from the source into a separate function. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-12-13virtio-serial: use uint32_t to count portsAmit Shah1-2/+2
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-11-29virtio: limit avail bytes lookaheadMichael S. Tsirkin1-1/+1
Commit 0d8d7690850eb0cf2b2b60933cf47669a6b6f18f introduced a regression in virtio-net performance because it looks into the ring aggressively while we really only care about a single packet worth of buffers. Reported as bugzilla 1066055 in launchpad. To fix, add parameters limiting lookahead, and use in virtqueue_avail_bytes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Tested-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16virtio-serial-bus: post_load send_event when vm is runningAlon Levy1-10/+44
Alexander Larsson found irq injection to Windows guests stopped after a migration. The symptom was the mouse stopped working. Reproduction steps are: 1. On src, start qemu with a virtio-serial port without any backend 2. On dest, start qemu with a virtio-serial port with a backend 3. Migrate. Upon migration, the older code detected the change in backend connection status, and sent a notification to the guest. However, it's not guaranteed that the apic is ready to inject irqs into the guest, and the irq line remained high, resulting in any future interrupts going unnoticed by the guest as well. Add a new timer based on vm_clock for 1 ns in the future from post_load to do the event send in case host_connected differs between migration source and target. RHBZ: 867366 Signed-off-by: Alon Levy <alevy@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> # verbose commit log
2012-09-28virtio-serial-bus: let chardev know the exact number of bytes requestedAmit Shah1-8/+3
Using the virtqueue_avail_bytes() function had an unnecessarily crippling effect on the number of bytes needed by the guest as reported to the chardev layer in the can_read() callback. Using the new virtqueue_get_avail_bytes() function will let us advertise the exact number of bytes we can send to the guest. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-07-09Merge remote-tracking branch 'mjt/mjt-iov2' into stagingAnthony Liguori1-5/+5
* mjt/mjt-iov2: rewrite iov_send_recv() and move it to iov.c cleanup qemu_co_sendv(), qemu_co_recvv() and friends export iov_send_recv() and use it in iov_send() and iov_recv() rename qemu_sendv to iov_send, change proto and move declarations to iov.h change qemu_iovec_to_buf() to match other to,from_buf functions consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent allow qemu_iovec_from_buffer() to specify offset from which to start copying consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset() rewrite iov_* functions change iov_* function prototypes to be more appropriate virtio-serial-bus: use correct lengths in control_out() message Conflicts: tests/Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-18qdev: Convert busses to QEMU Object ModelAnthony Liguori1-6/+18
This is far less interesting than it sounds. We simply add an Object to each BusState and then register the types appropriately. Most of the interesting refactoring will follow in the next patches. Since we're changing fundamental type names (BusInfo -> BusClass), it all needs to convert at once. Fortunately, not a lot of code is affected. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Made all new bus TypeInfos static const.] [AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Move bus properties to abstract superclassesPaolo Bonzini1-1/+1
In qdev, each bus in practice identified an abstract superclass, but this was mostly hidden. In QOM, instead, these abstract classes are explicit so we can move bus properties there. All bus property walks are removed, and all device property walks are changed to look along the class hierarchy instead. We would have duplicates if class A defines some properties and its subclass B does not define any, because class_b->props will be left equal to class_a->props. The solution here is to reintroduce the class_base_init TypeInfo callback, that was present in one of the early QOM versions but removed (on my request...) before committing. This breaks global bus properties, an obscure feature when used with the command-line which is actually useful and used when used by backwards-compatible machine types. So this patch also adjusts the global bus properties in hw/pc_piix.c to refer to the abstract class. Globals and other properties must be modified in the same patch to avoid complications related to initialization ordering. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Move bus properties to a separate globalPaolo Bonzini1-5/+7
Simple code movement in order to simplify future refactoring. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-07change iov_* function prototypes to be more appropriateMichael Tokarev1-3/+3
Reorder arguments to be more natural, readable and consistent with other iov_* functions, and change argument names, from: iov_from_buf(iov, iov_cnt, buf, iov_off, size) to iov_from_buf(iov, iov_cnt, offset, buf, bytes) The result becomes natural English: copy data to this `iov' vector with `iov_cnt' elements starting at byte offset `offset' from memory buffer `buf', processing `bytes' bytes max. (Try to read the original prototype this way). Also change iov_clear() to more general iov_memset() (it uses memset() internally anyway). While at it, add comments to the header file describing what the routines actually does. The patch only renames argumens in the header, but keeps old names in the implementation. The next patch will touch actual code to match. Now, it might look wrong to pay so much attention to so small things. But we've so many badly designed interfaces already so the whole thing becomes rather confusing or error prone. One example of this is previous commit and small discussion which emerged from it, with an outcome that the utility functions like these aren't well-understdandable, leading to strange usage cases. That's why I paid quite some attention to this set of functions and a few others in subsequent patches. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-07virtio-serial-bus: use correct lengths in control_out() messageMichael Tokarev1-3/+3
Original code has one thing to process (cur_len), requests to convert from iovec to buf another thing (len which is actually max_len), and processes something else (copied). Whole thing is very difficult to understand, even if it does a right thing. The iov_to_buf() conversion in this case will always return cur_len, because it is the length of the iovec it was asked to process, and the size we asked to convert is the same or larger, and iov_to_buf() will stop at reaching either iov or buf. Make the code saner by doing the only sane thing: dropping `copied' which is always the same as `cur_len' but just introduces questions. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-05-21virtio: check virtio_load return codeOrit Wassermann1-1/+5
Otherwise we crash on error. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-25virtio-serial-bus: Unset guest_connected at reset and driver resetAmit Shah1-0/+28
When a guest driver resets the virtio status to not ready, or when qemu is reset, reset all ports' guest_connected bit and let port users know of this event if they have the guest_close() callback registered. Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-04-25virtio-serial-bus: fix guest_connected init before driver initAlon Levy1-8/+21
guest_connected should be false before guest driver initialization, and true after, both for multiport aware and non multiport aware drivers. Don't set it before the guest_features are available; instead use set_status which is called by io to VIRTIO_PCI_STATUS with VIRTIO_CONFIG_S_DRIVER_OK by even older non multiport drivers. [Amit: Add comment, tweak summary, only set guest_connected and not reset it as a side-effect.] Signed-off-by: Alon Levy <alevy@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber1-2/+2
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: kill off DeviceInfoAnthony Liguori1-1/+1
It is no longer used in the tree since everything is done natively through QEMU Object Model. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-9/+10
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27virtio-serial: convert to QEMU Object ModelAnthony Liguori1-27/+41
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: move qdev->info to classAnthony Liguori1-3/+3
Right now, DeviceInfo acts as the class for qdev. In order to switch to a proper ObjectClass derivative, we need to ween all of the callers off of interacting directly with the info pointer. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini1-0/+3
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-30virtio-console: Fix failure on unconnected ptyChristian Borntraeger1-1/+13
when I tried qemu with -virtio-console pty the guest hangs and attaching on /dev/pts/<x> does not return anything if the attachment is too late. This results in pty_chr_write() returning 0, which causes the port to get throttled. This results in the guest getting frozen as the guest->host virtio_console writes don't return until the host releases the vq element back to the guest. For the virtio-serial use case we don't want to lose data but for the console case we better drop data instead of "killing" the guest console. If we get chardev->frontend notification and a better behaving virtio-console we can revert this fix. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-12-21virtio-serial-bus: Ports are expected to implement 'have_data' callbackAmit Shah1-3/+3
There's no need to check if ports can accept any incoming data from the guest each time the guest sends data. Check if the port implements such functionality during port initialisation. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-11/+11
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23virtio-serial: Turn props any virtio-serial-bus device must have into bus propsMarkus Armbruster1-0/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23virtio-serial: Clean up virtser_bus_dev_print() outputMarkus Armbruster1-8/+5
Old version looks like this in info qtree (last four lines): dev: virtconsole, id "" dev-prop: is_console = 1 dev-prop: nr = 0 dev-prop: chardev = <null> dev-prop: name = <null> dev-prop-int: id: 0 dev-prop-int: guest_connected: 1 dev-prop-int: host_connected: 0 dev-prop-int: throttled: 0 Indentation is off, and "dev-prop-int" suggests these are properties you can configure with -device, which isn't the case. The other buses' print_dev() callbacks don't do that. For instance, PCI's output looks like this: class Ethernet controller, addr 00:03.0, pci id 1af4:1000 (sub 1af4:0001) bar 0: i/o at 0xffffffffffffffff [0x1e] bar 1: mem at 0xffffffffffffffff [0xffe] bar 6: mem at 0xffffffffffffffff [0xfffe] Change virtser_bus_dev_print() to that style. Result: dev: virtconsole, id "" dev-prop: is_console = 1 dev-prop: nr = 0 dev-prop: chardev = <null> dev-prop: name = <null> port 0, guest on, host off, throttle off Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-22Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-1/+1
2011-07-18iov: Update parameter usage in iov_(to|from)_buf()Hannes Reinecke1-1/+1
iov_to_buf() has an 'offset' parameter, iov_from_buf() hasn't. This patch adds the missing parameter to iov_from_buf(). It also renames the 'offset' parameter to 'iov_off' to emphasize it's the offset into the iovec and not the buffer. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-18virtio-serial-bus: Fix trailing \n in error_report stringAmit Shah1-1/+1
Markus fixed offenders in the file but one instance sneaked in via another patch. Fix it. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18virtio-serial-bus: Add trace eventsAmit Shah1-0/+7
Add some trace events for messages passed between the guest and host. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-06-27Merge remote-tracking branch 'amit/for-anthony' into stagingAnthony Liguori1-10/+14
2011-06-27virtio-serial: Fix segfault on guest bootLuiz Capitulino1-10/+14
If I start qemu with: # qemu -hda disks/test.img -enable-kvm -m 1G -snapshot \ -device virtio-serial \ -chardev socket,host=localhost,port=1234,server,nowait,id=foo \ -device virtserialport,chardev=foo,name=org.qemu.guest_agent I get a segfault when booting a Fedora 14 guest. The backtrace says: Program terminated with signal 11, Segmentation fault. #0 0x0000000000420850 in handle_control_message (vser=0x3732bd0, buf=0x2c173e0, len=8) at /home/lcapitulino/src/qmp-unstable/hw/virtio-serial-bus.c:335 335 info = DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info); What's happening is VIRTIO_CONSOLE_DEVICE_READY is a message for the whole device, not for an individual port. So port is NULL. This bug was introduced by commit a15bb0d6a981de749452a5180fc8084d625671da. This commit fixes that by making the port returned by find_port_by_id() be used only by the VIRTIO_CONSOLE_PORT_READY and VIRTIO_CONSOLE_PORT_OPEN messages. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-06-24Strip trailing '\n' from error_report()'s first argumentMarkus Armbruster1-5/+5
error_report() prepends location, and appends a newline. The message constructed from the arguments should not contain a newline. Fix the obvious offenders. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-27virtio-serial: Drop redundant VirtIOSerialPort member infoMarkus Armbruster1-16/+26
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-05-27virtio-serial: Clean up virtconsole detectionMarkus Armbruster1-2/+2
virtio-serial-bus needs to treat "virtconsole" devices specially. It uses VirtIOSerialPort member is_console to recognize them. It gets its value via property initialization. Cute hack, except it lets users mess with it: "-device virtconsole,is_console=0" isn't plugged into port 0 as it should. Move the flag to VirtIOSerialPortInfo. Keep the property for backward compatibility; its value has no effect. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-05-27virtio-serial: Plug memory leak on qdev exit()Markus Armbruster1-18/+9
virtio_serial_init() allocates the VirtIOSerialBus dynamically, but virtio_serial_exit() doesn't free it. Fix by getting rid of the allocation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-05-27virtio-serial-bus: use bh for unthrottlingAlon Levy1-2/+10
Instead of calling flush_queued_data when unthrottling, schedule a bh. That way we can return immediately to the caller, and the flush uses the same call path as a have_data for callbackee. No migration change is required because bh are called from vm_stop. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-04-28virtio-serial: Fix endianness bug in the config spaceAlexey Kardashevskiy1-10/+13
The virtio serial specification requres that the values in the config space are encoded in native endian of the guest. The qemu virtio-serial code did not do conversion to the guest endian format what caused problems when host and guest use different format. This patch corrects the qemu side, correctly doing host-native <-> guest-native conversions when accessing the config space. This won't break any setups that aren't already broken, and fixes the case of different host and guest endianness. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-03-28virtio-serial: don't crash on invalid inputMichael S. Tsirkin1-0/+3
Fix crash on invalid input in virtio-serial. Discovered by code review, untested. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-12-29 12:15:18 +0000