aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio-pci.c
AgeCommit message (Collapse)AuthorFilesLines
2010-08-22virtio-serial: Cleanup on device hot-unplugAmit Shah1-1/+9
Free malloc'ed memory, unregister from savevm and clean up virtio-common bits on device hot-unplug. This was found performing a migration after device hot-unplug. Reported-by: <lihuang@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26virtio-blk: Create exit function to unregister savevmAlex Williamson1-0/+1
Otherwise we can't migrate after we've removed a virtio block device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-13virtio-blk: Fix virtio-blk-s390 to require driveMarkus Armbruster1-4/+0
Move the check from virtio_blk_init_pci(), where it protects only virtio-blk-pci, to virtio_blk_init(). Without that, virtio-blk-s390 initializes without a drive. I figure that can lead to null pointer dereferences. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-13virtio-pci: Check for virtio_blk_init() failureMarkus Armbruster1-0/+3
It can't actually fail now, but the next commit will change that. s390_virtio_blk_init() already checks for failure, but virtio_blk_init_pci() doesn't. Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata1-1/+0
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-2/+2
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02blockdev: Clean up automatic drive deletionMarkus Armbruster1-1/+1
We automatically delete blockdev host parts on unplug of the guest device. Too much magic, but we can't change that now. The delete happens early in the guest device teardown, before the connection to the host part is severed. Thus, the guest part's pointer to the host part dangles for a brief time. No actual harm comes from this, but we'll catch such dangling pointers a few commits down the road. Clean up the dangling pointers by delaying the automatic deletion until the guest part's pointer is gone. Device usb-storage deliberately makes two qdev properties refer to the same drive, because it automatically creates a second device. Again, too much magic we can't change now. Multiple references worked okay before, but now free_drive() dies for the second one. Zap the extra reference. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-22virtio-pci: fix bus master bug setting on loadAlex Williamson1-1/+1
The comment suggests we're checking for the driver in the ready state and bus master disabled, but the code is checking that it's not in the ready state. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Found-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22virtio-9p: Make infrastructure for the new security model.Venkateswararao Jujjuri (JV)1-2/+2
This patch adds required infrastructure for the new security model. - A new configure option for attr/xattr. - if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined. - Defines routines related to both security models. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster1-1/+0
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03virtio-9p: Add a virtio 9p device to qemuAnthony Liguori1-0/+32
This patch doesn't implement the 9p protocol handling code. It adds a simple device which dump the protocol data. [jvrao@linux.vnet.ibm.com: Little-Endian to host format conversion] [aneesh.kumar@linux.vnet.ibm.com: Multiple-mounts support] Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01virtio-pci: fill in notifier supportMichael S. Tsirkin1-0/+63
Support host/guest notifiers in virtio-pci. The last one only with kvm, that's okay because vhost relies on kvm anyway. Note on kvm usage: kvm ioeventfd API is implemented on non-kvm systems as well, this is the reason we don't need if (kvm_enabled()) around it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01virtio: add set_status callbackMichael S. Tsirkin1-2/+3
vhost net backend needs to be notified when frontend status changes. Add a callback, similar to set_features. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-31Don't check for bus master for old guestsAlexander Graf1-1/+24
Older Linux guests don't activate the bus master enable bit. So for those we can just try to be clever and track if they set the DEVICE_OK bit even though bus mastering is still disabled. Under that condition we can disable the windows safety check. With that logic in place both guests should work just fine. Without PCI hotplug breaks virtio-net in Linux < 2.6.34 guests. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-1/+1
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16error: Move qemu_error & friends into their own headerMarkus Armbruster1-1/+1
2010-03-08virtio-pci: Use DEV_NVECTORS_UNSPECIFIED instead of -1 for virtio-serialAmit Shah1-3/+5
Use the named constant instead of -1. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19virtio-serial: pci: Allow MSI to be disabledAmit Shah1-3/+3
Michael noted we don't allow disabling of MSI for the virtio-serial-pci device. Fix that. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10block: add topology qdev propertiesChristoph Hellwig1-5/+6
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-serial: Use MSI vectors for port virtqueuesAmit Shah1-0/+4
This commit enables the use of MSI interrupts for virtqueue notifications for ports. We use nr_ports + 1 (for control channel) msi entries for the ports, as only the in_vq operations need an interrupt on the guest. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-console: qdev conversion, new virtio-serial-busAmit Shah1-4/+9
This commit converts the virtio-console device to create a new virtio-serial bus that can host console and generic serial ports. The file hosting this code is now called virtio-serial-bus.c. The virtio console is now a very simple qdev device that sits on the virtio-serial-bus and communicates between the bus and qemu's chardevs. This commit also includes a few changes to the virtio backing code for pci and s390 to spawn the virtio-serial bus. As a result of the qdev conversion, we get rid of a lot of legacy code. The old-style way of instantiating a virtio console using -virtioconsole ... is maintained, but the new, preferred way is to use -device virtio-serial -device virtconsole,chardev=... With this commit, multiple devices as well as multiple ports with a single device can be supported. For multiple ports support, each port gets an IO vq pair. Since the guest needs to know in advance how many vqs a particular device will need, we have to set this number as a property of the virtio-serial device and also as a config option. In addition, we also spawn a pair of control IO vqs. This is an internal channel meant for guest-host communication for things like port open/close, sending port properties over to the guest, etc. This commit is a part of a series of other commits to get the full implementation of multiport support. Future commits will add other support as well as ride on the savevm version that we bump up here. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11virtio-pci: thinko fixMichael S. Tsirkin1-1/+1
Since patch ed757e140c0ada220f213036e4497315d24ca8bct, virtio will sometimes clear all status registers on bus master disable, which loses information such as VIRTIO_CONFIG_S_FAILED bit. This is a result of a patch being misapplied: code uses ! instead of ~ for bit operations as in Yan's original patch. This obviously does not make sense. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11virtio: add features as qdev propertiesMichael S. Tsirkin1-8/+17
Add feature bits as properties to virtio. This makes it possible to e.g. define machine without indirect buffer support, which is required for 0.10 compatibility, or without hardware checksum support, which is required for 0.11 compatibility. Since default values for optional features are now set by qdev, get_features callback has been modified: it sets non-optional bits, and clears bits not supported by host. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11virtio: rename features -> guest_featuresMichael S. Tsirkin1-2/+2
Rename features->guest_features. This is what they are, avoid confusion with host features which we also need to keep around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann1-8/+1
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori1-1/+1
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12virtio: verify features on loadMichael S. Tsirkin1-3/+11
migrating between hosts which have different features might break silently, if the migration destination does not support some features supported by source. Prevent this from happening by comparing acked feature bits with the mask supported by the device. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01virtio: do not reset msix state on soft resetMichael S. Tsirkin1-4/+8
msix state is managed by OS, not the driver, so it's wrong to touch it on io from driver. Mark all vectors unused instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata1-1/+1
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata1-2/+2
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27virtio: use qdev properties for configuration.Gerd Hoffmann1-10/+23
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06qemu/pci: make pci not depend on msixMichael S. Tsirkin1-1/+9
Making pci device cleanup msix automatically makes pci.c depend on msix.c, which is IMO messy. Since devices do msix_init it's easy and natural for them to also do msix_uninit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05virtio-pci: return error if virtio_console_init failsAmit Shah1-0/+3
Currently only one virtio_console device is supported. Trying to add multiple devices fails and such failure should be reported back to the qdev init functions. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/virtio-pci: remove unnecessary checkMichael S. Tsirkin1-2/+1
it's safe to call msix_write_config if msix is disabled, so call it unconditionally on pci config write. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu: clean up target page usage in msixMichael S. Tsirkin1-2/+1
Since cpu_register_phys_memory does not require size to be a multiple of target page size, simply make msix page size 0x1000. Do this in msix, reverting part of 5e520a7d500ec2569d22d80f9ef4272a34cb3c80, as we no longer have to pass target page around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/virtio: fix reset with device removalMichael S. Tsirkin1-6/+8
virtio pci registers its own reset handler, but fails to unregister it, which will lead to crashes after device removal. Solve this problem by switching to qdev reset handler, which is automatically unregistered. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05drive cleanup fixes.Gerd Hoffmann1-0/+9
Changes: * drive_uninit() wants a DriveInfo now. * drive_uninit() also calls bdrv_delete(), so callers don't need to do that. * drive_uninit() calls are moved over to the ->exit() callbacks, destroy_bdrvs() is zapped. * setting bdrv->private is not needed any more as the only user (destroy_bdrvs) is gone. * usb-storage needs no drive_uninit, scsi-disk will handle that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: move unregister from PCIDevice to PCIDeviceInfoGerd Hoffmann1-1/+0
One more cleanup while being at it ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-2/+2
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-2/+2
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile msix only onceBlue Swirl1-1/+2
Get page size in device init. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-11VirtIO: Fix QEMU crash during Windows PNP testsYan Vugenfirer1-2/+12
Hello, In some cases bus driver can deassert "bus master" bit in PCI command register. The driver will no longer be able to update related registers in the device. Eventually it will cause QEMU to exit in "virtqueue_num_heads" function. Attached path that fixes the described issue. Best regards, Yan Vugenfirer. >From 3fdafbdfad676ec8479dc073cff70bf356868bfe Mon Sep 17 00:00:00 2001 From: Yan Vugenfirer <yvugenfi@redhat.com> Date: Tue, 8 Sep 2009 10:08:14 -0400 Subject: [PATCH] VirtIO: Fix QEMU crash during Windows PNP tests Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27virtio-pci error loggingGerd Hoffmann1-1/+1
Use the new qemu_error() function for virtio-blk-pci. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann1-4/+9
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24virtio-blk: add msi support.Gerd Hoffmann1-2/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10qdev/prop: convert virtio-pci.c to helper macros.Gerd Hoffmann1-23/+8
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10qdev-ify virtio-blk.Gerd Hoffmann1-2/+10
First user of the new drive property. With this patch applied host and guest config can be specified separately, like this: -drive if=none,id=disk1,file=/path/to/disk.img -device virtio-blk-pci,drive=disk1 You can set any property for virtio-blk-pci now. You can set the pci address via addr=. You can switch the device into 0.10 compat mode using class=0x0180. As this is per device you can have one 0.10 and one 0.11 virtio block device in a single virtual machine. Old syntax continues to work. Internally it does the same as the two lines above though. One side effect this has is a different initialization order, which might result in a different pci address being assigned by default. Long term plan here is to have this working for all block devices, i.e. once all scsi is properly qdev-ified you will be able to do something like this: -drive if=none,id=sda,file=/path/to/disk.img -device lsi,id=lsi,addr=<pciaddr> -device scsi-disk,drive=sda,bus=lsi.0,lun=<n> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-30Remove the virtio-{blk, console}-pci-0-10 device typesMark McLoughlin1-46/+11
These are now unused. However, perhaps the idea is that when we add -device, they will be useful? In that case, we should add virtio-net-pci-0-10 too. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev/compat: virtio-net-pci 0.10 compatibility.Gerd Hoffmann1-3/+24
Add vectors property, allowing to turn off msi by setting vectors=0. Add compat property to pc-0.10 disabling msi. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev/compat: virtio-console-pci 0.10 compatibility.Gerd Hoffmann1-1/+16
Add class property to virtio-console-pci allowing to specify the PCI class. Add compat property to pc-0.10 to set the old PCI class. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-11-02 08:38:39 +0000