aboutsummaryrefslogtreecommitdiff
path: root/hw/usb
AgeCommit message (Collapse)AuthorFilesLines
2024-05-10xen: register legacy backends via xen_backend_initPaolo Bonzini1-10/+4
It is okay to register legacy backends in the middle of xen_bus_init(). All that the registration does is record the existence of the backend in xenstore. This makes it possible to remove them from the build without introducing undefined symbols in xen_be_init(). It also removes the need for the backend_register callback, whose only purpose is to avoid registering nonfunctional backends. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240509170044.190795-8-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-09hw/usb/dev-network: Remove unused struct 'rndis_config_parameter'Dr. David Alan Gilbert1-8/+0
As far as I can tell it was never used. Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240505171444.333302-5-dave@treblig.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-04-25hw, target: Add ResetType argument to hold and exit phase methodsPeter Maydell2-5/+5
We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. Pass the type to all three of the phase methods to avoid having to do that. Commit created with for dir in hw target include; do \ spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/reset-type.cocci \ --keep-comments --smpl-spacing --in-place \ --include-headers --dir $dir; done and no manual edits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
2024-04-18hw/usb: move stubs out of stubs/Paolo Bonzini2-1/+29
Since the USB stubs are needed exactly when the Kconfig symbols are not enabled, they can be placed in hw/usb/ and conditionalized on CONFIG_USB. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-11-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-16usb-storage: Fix BlockConf defaultsKevin Wolf1-9/+0
Commit 30896374 started to pass the full BlockConf from usb-storage to scsi-disk, while previously only a few select properties would be forwarded. This enables the user to set more properties, e.g. the block size, that are actually taking effect. However, now the calls to blkconf_apply_backend_options() and blkconf_blocksizes() in usb_msd_storage_realize() that modify some of these properties take effect, too, instead of being silently ignored. This means at least that the block sizes get an unconditional default of 512 bytes before the configuration is passed to scsi-disk. Before commit 30896374, the property wouldn't be set for scsi-disk and therefore the device dependent defaults would apply - 512 for scsi-hd, but 2048 for scsi-cd. The latter default has now become 512, too, which makes at least Windows 11 installation fail when installing from usb-storage. Fix this by simply not calling these functions any more in usb-storage and passing BlockConf on unmodified (except for the BlockBackend). The same functions are called by the SCSI code anyway and it sets the right defaults for the actual media type. Fixes: 308963746169 ('scsi: Don't ignore most usb-storage properties') Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2260 Reported-by: Jonas Svensson Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Message-id: 20240412144202.13786-1-kwolf@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-04-01usb-audio: Fix invalid values in AudioControl descriptorsJoonas Kankaala1-3/+1
This fixes the invalid bInterfaceProtocol value 0x04 in the USB audio AudioControl descriptors. It should be zero. While Linux and Windows forgive this error, macOS 14 Sonoma does not. The usb-audio device does not appear in macOS sound settings even though the device is recognized and shows up in USB system information. According to the USB audio class specs 1.0-4.0, valid values are 0x00, 0x20, 0x30 and 0x40. (Note also that Linux prints the warning "unknown interface protocol 0x4, assuming v1", but then proceeds as if the value was zero.) This also fixes the invalid wTotalLength value in the multi-channel setup AudioControl interface header descriptor (used when multi=on and out.mixing-engine off). The combined length of all the descriptors there add up to 0x37, not 0x38. In Linux, "lsusb -D ..." displays incomplete descriptor information when this length is incorrect. Signed-off-by: Joonas Kankaala <joonas.a.kankaala@gmail.com> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-01hw/usb/bus.c: PCAP adding 0xA in Windows versionBenjamin David Lunt1-2/+3
Since Windows text files use CRLFs for all \n, the Windows version of QEMU inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP files. This is due to the fact that the PCAP file is opened as TEXT instead of BINARY. To show an example, when using a very common protocol to USB disks, the BBB protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10) command will have a command block length of 10 (0xA). When this 10-byte command (part of the 31-byte CBW) is placed into the PCAP file, the Windows file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a 32-byte CBW. Actual CBW: 0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0a 25 USBC...........% 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ............... PCAP CBW 0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0d 0a USBC............ 0050 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 %.............. I believe simply opening the PCAP file as BINARY instead of TEXT will fix this issue. Resolves: https://bugs.launchpad.net/qemu/+bug/2054889 Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net> Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net> [thuth: Break long line to avoid checkpatch.pl error] Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-02-27hw/usb: remove duplicate file in system_ssPaolo Bonzini1-1/+1
Because USB_EHCI_SYSBUS selects USB_EHCI, there is no need to include hcd-ehci.c explicitly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-11-pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-27hw/usb: extract sysbus-ohci to a separate filePaolo Bonzini4-58/+93
Split the sysbus version to a separate file so that it is not included in PCI-only machines, and adjust Kconfig for machines that do need sysbus-ohci. The copyrights are based on the time and employer of balrog and Paul Brook's contributions. While adjusting the SM501 dependency, move it to the right place instead of keeping it in the R4D machine. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-10-pbonzini@redhat.com> [PMD: Rename some functions using 'ohci_sysbus_' prefix] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-27hw/usb: remove usb_bus_findPaolo Bonzini1-14/+1
Inline the sole remaining use, which is for the -usbdevice command line. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-9-pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-20hw/usb/ehci: Rename NB_PORTS -> EHCI_PORTSPhilippe Mathieu-Daudé4-16/+16
Rename NB_PORTS as EHCI_PORTS to avoid definition clash with UHCI equivalent: hw/usb/hcd-ehci.h:40:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined] #define NB_PORTS 6 /* Max. Number of downstream ports */ ^ hw/usb/hcd-uhci.h:38:9: note: previous definition is here #define NB_PORTS 2 ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20hw/usb/uhci: Rename NB_PORTS -> UHCI_PORTSPhilippe Mathieu-Daudé2-13/+13
Rename NB_PORTS as UHCI_PORTS to avoid definition clash with EHCI equivalent: hw/usb/hcd-uhci.h:38:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined] #define NB_PORTS 2 ^ hw/usb/hcd-ehci.h:40:9: note: previous definition is here #define NB_PORTS 6 /* Max. Number of downstream ports */ ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-20hw/usb: Style cleanupPhilippe Mathieu-Daudé2-3/+6
We are going to modify these lines, fix their style in order to avoid checkpatch.pl warning. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-16usb: inline device creation functionsPaolo Bonzini1-23/+0
Allow boards to use the device creation functions even if USB itself is not available; of course the functions will fail inexorably, but this can be okay if the calls are conditional on the existence of some USB host controller device. This is for example the case for hw/mips/loongson3_virt.c. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-07scsi: Don't ignore most usb-storage propertiesKevin Wolf1-4/+1
usb-storage is for the most part just a wrapper around an internally created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all of the usual block device properties to the user, but then only forwards a few select properties to the internal device while the rest is silently ignored. This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf instead of some individual values inside of it so that usb-storage can now pass the whole configuration to the internal scsi-disk. This enables the remaining block device properties, e.g. logical/physical_block_size or discard_granularity. Buglink: https://issues.redhat.com/browse/RHEL-22375 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240131130607.24117-1-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-01-05Merge tag 'migration-20240104-pull-request' of ↵Peter Maydell2-2/+2
https://gitlab.com/peterx/qemu into staging migration 1st pull for 9.0 - We lost Juan and Leo in the maintainers file - Steven's suspend state fix - Steven's fix for coverity on migrate_mode - Avihai's migration cleanup series # -----BEGIN PGP SIGNATURE----- # # iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl # ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+ # Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D # =sfuM # -----END PGP SIGNATURE----- # gpg: Signature made Thu 04 Jan 2024 04:30:07 GMT # gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706 # gpg: issuer "peterx@redhat.com" # gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown] # gpg: aka "Peter Xu <peterx@redhat.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706 * tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu: (26 commits) migration: fix coverity migrate_mode finding migration/multifd: Remove unnecessary usage of local Error migration: Remove unnecessary usage of local Error migration: Fix migration_channel_read_peek() error path migration/multifd: Remove error_setg() in migration_ioc_process_incoming() migration/multifd: Fix leaking of Error in TLS error flow migration/multifd: Simplify multifd_channel_connect() if else statement migration/multifd: Fix error message in multifd_recv_initial_packet() migration: Remove errp parameter in migration_fd_process_incoming() migration: Refactor migration_incoming_setup() migration: Remove nulling of hostname in migrate_init() migration: Remove migrate_max_downtime() declaration tests/qtest: postcopy migration with suspend tests/qtest: precopy migration with suspend tests/qtest: option to suspend during migration tests/qtest: migration events migration: preserve suspended for bg_migration migration: preserve suspended for snapshot migration: preserve suspended runstate migration: propagate suspended runstate ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-04Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell1-2/+6
* configure: use a native non-cross compiler for linux-user * meson: cleanups * target/i386: miscellaneous cleanups and optimizations * target/i386: implement CMPccXADD * target/i386: the sgx_epc_get_section stub is reachable * esp: check for NULL result from scsi_device_find() # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWRImYUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNd7AgAgcyJGiMfUkXqhefplpm06RDXQIa8 # FuoJqPb21lO75DQKfaFRAc4xGLagjJROMJGHMm9HvMu2VlwvOydkQlfFRspENxQ/ # 5XzGdb/X0A7HA/mwUfnMB1AZx0Vs32VI5IBSc6acc9fmgeZ84XQEoM3KBQHUik7X # mSkE4eltR9gJ+4IaGo4voZtK+YoVD8nEcuqmnKihSPWizev0FsZ49aNMtaYa9qC/ # Xs3kiQd/zPibHDHJu0ulFsNZgxtUcvlLHTCf8gO4dHWxCFLXGubMush83McpRtNB # Qoh6cTLH+PBXfrxMR3zmTZMNvo8Euls3s07Y8TkNP4vdIIE/kMeMDW1wJw== # =mq30 # -----END PGP SIGNATURE----- # gpg: Signature made Sun 31 Dec 2023 08:12:22 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits) meson.build: report graphics backends separately configure, meson: rename targetos to host_os meson: rename config_all meson: remove CONFIG_ALL meson: remove config_targetos meson: remove CONFIG_POSIX and CONFIG_WIN32 from config_targetos meson: remove OS definitions from config_targetos meson: always probe u2f and canokey if the option is enabled meson: move subdirs to "Collect sources" section meson: move config-host.h definitions together meson: move CFI detection code with other compiler flags meson: keep subprojects together meson: move accelerator dependency checks together meson: move option validation together meson: move program checks together meson: add more sections to main meson.build configure: unify again the case arms in probe_target_compiler configure: remove unnecessary subshell Makefile: clean qemu-iotests output meson: use version_compare() to compare version ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-04cpus: check running not RUN_STATE_RUNNINGSteve Sistare2-2/+2
When a vm transitions from running to suspended, runstate notifiers are not called, so the notifiers still think the vm is running. Hence, when we call vm_start to restore the suspended state, we call vm_state_notify with running=1. However, some notifiers check for RUN_STATE_RUNNING. They must check the running boolean instead. No functional change. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/1704312341-66640-4-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2023-12-31configure, meson: rename targetos to host_osPaolo Bonzini1-2/+2
This variable is about the host OS, not the target. It is used a lot more since the Meson conversion, but the original sin dates back to 2003. Time to fix it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-12-31meson: remove CONFIG_POSIX and CONFIG_WIN32 from config_targetosPaolo Bonzini1-1/+3
For consistency with other OSes, use if...endif for rules that are target-independent. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-12-31meson: remove OS definitions from config_targetosPaolo Bonzini1-1/+3
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but only CONFIG_LINUX has substantial use. Convert them all to if...endif. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-12-30hw/usb: Constify VMStateRichard Henderson25-49/+49
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-59-richard.henderson@linaro.org>
2023-11-28hw/usb/vt82c686-uhci-pci: Use ISA instead of PCI interruptsBALATON Zoltan1-0/+9
This device is part of a superio/ISA bridge chip and IRQs from it are routed to an ISA interrupt. Use via_isa_set_irq() function to implement this in a vt82c686-uhci-pci specific irq handler. This reverts commit 422a6e8075752bc5342afd3eace23a4990dd7d98. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-ID: <ed5cdeaba7cf01eebdaa35f84c63427f4d8876b1.1701035944.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-21net: Provide MemReentrancyGuard * to qemu_new_nic()Akihiko Odaki1-1/+2
Recently MemReentrancyGuard was added to DeviceState to record that the device is engaging in I/O. The network device backend needs to update it when delivering a packet to a device. In preparation for such a change, add MemReentrancyGuard * as a parameter of qemu_new_nic(). Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-10-06hw/usb: Silence compiler warnings in USB code when compiling with -WshadowThomas Huth5-14/+14
Rename variables or remove nested definitions where it makes sense, so that we can finally compile the USB code with "-Wshadow", too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20231004130822.113343-1-thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-10-03audio: propagate Error * out of audio_initMartin Kletzander1-1/+4
Starting from audio_driver_init, propagate errors via Error ** so that audio_init_audiodevs can simply pass &error_fatal, and AUD_register_card can signal faiure. Signed-off-by: Martin Kletzander <mkletzan@redhat.com> [Reworked the audio/audio.c parts, while keeping Martin's hw/ changes. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-31hw/usb/hcd-xhci: Avoid variable-length array in xhci_get_port_bandwidth()Peter Maydell1-6/+4
In xhci_get_port_bandwidth(), we use a variable-length array to construct the buffer to send back to the guest. Avoid the VLA by using dma_memory_set() to directly request the memory system to fill the guest memory with a string of '80's. The codebase has very few VLAs, and if we can get rid of them all we can make the compiler error on new additions. This is a defensive measure against security bugs where an on-stack dynamic allocation isn't correctly size-checked (e.g. CVE-2021-3527). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230824164818.2652452-1-peter.maydell@linaro.org>
2023-08-31hw/usb: spelling fixesMichael Tokarev7-9/+9
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-08-31hw/char: Have FEWatchFunc handlers return G_SOURCE_CONTINUE/REMOVEPhilippe Mathieu-Daudé1-1/+1
GLib recommend to use G_SOURCE_REMOVE / G_SOURCE_CONTINUE for GSourceFunc callbacks. Our FEWatchFunc is a GSourceFunc returning such value. Use such definitions which are "more memorable" [*]. [*] https://docs.gtk.org/glib/callback.SourceFunc.html#return-value Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230705133139.54419-5-philmd@linaro.org>
2023-07-25hw/usb/canokey: change license to GPLv2+Hongren (Zenithal) Zheng2-2/+2
Apache license is considered by some to be not compatible with GPLv2+. Since QEMU as combined work is GPLv2-only, these two files should be made compatible. Reported-by: "Daniel P. Berrangé" <berrange@redhat.com> Link: https://lore.kernel.org/qemu-devel/ZEpKXncC%2Fe6FKRe9@redhat.com/ Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-By: canokeys.org (http://canokeys.org) <contact@canokeys.org> Acked-by: YuanYang Meng <mkfssion@mkfssion.com> Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2023-07-14kconfig: Add PCIe devices to s390x machinesCédric Le Goater1-1/+1
It is useful to extend the number of available PCIe devices to KVM guests for passthrough scenarios and also to expose these models to a different (big endian) architecture. Introduce a new config PCIE_DEVICES to select models, Intel Ethernet adapters and one USB controller. These devices all support MSI-X which is a requirement on s390x as legacy INTx are not supported. Cc: Matthew Rosato <mjrosato@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-ID: <20230712080146.839113-1-clg@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé1-37/+37
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-09hw/usb/hcd-ehci-pci: Simplify using DEVICE_GET_CLASS() macroPhilippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-25usb/ohci: Set pad to 0 after frame updatePaolo Bonzini1-0/+2
When the OHCI controller's framenumber is incremented, HccaPad1 register should be set to zero (Ref OHCI Spec 4.4) ReactOS uses hccaPad1 to determine if the OHCI hardware is running, consequently it fails this check in current qemu master. Signed-off-by: Ryan Wendland <wendland@live.com.au> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1048 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-10hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machineFabiano Rosas1-1/+0
This machine hardcodes initialization of the USB device, so select the corresponding Kconfig. It is not enough to have it as "default y if XLNX_VERSAL" at usb/Kconfig because building --without-default-devices disables the default selection resulting in: $ ./qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Aborted (core dumped) Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230208192654.8854-8-farosas@suse.de> Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-28hw: replace most qemu_bh_new calls with qemu_bh_new_guardedAlexander Bulekov7-9/+17
This protects devices from bh->mmio reentrancy issues. Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230427211013.2994127-5-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-03-21hw/usb/imx: Fix out of bounds access in imx_usbphy_read()Guenter Roeck1-2/+17
The i.MX USB Phy driver does not check register ranges, resulting in out of bounds accesses if an attempt is made to access non-existing PHY registers. Add range check and conditionally report bad accesses to fix the problem. While at it, also conditionally log attempted writes to non-existing or read-only registers. Reported-by: Qiang Liu <cyruscyliu@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Qiang Liu <cyruscyliu@gmail.com> Message-id: 20230316234926.208874-1-linux@roeck-us.net Link: https://gitlab.com/qemu-project/qemu/-/issues/1408 Fixes: 0701a5efa015 ("hw/usb: Add basic i.MX USB Phy support") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-09Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into stagingPeter Maydell2-10/+21
Enable PV backends with Xen/KVM emulation This is phase 2, following on from the basic platform support which was already merged. • Add a simple single-tenant internal XenStore implementation • Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table • Provide emulated back ends for Xen operations • Header cleanups to allow PV back ends to build without Xen itself • Enable PV back ends in emulated mode • Documentation update Tested-by: Paul Durrant <paul@xen.org> ... on real Xen (master branch, 4.18) with a Debian guest. # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h # em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB # KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk # AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS # +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu # Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ # jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca # I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD # SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS # OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr # km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0 # VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18 # 1mq9v6Xe9RQZ # =JGLX # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT # gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544 # gpg: issuer "dwmw@amazon.co.uk" # gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown] # gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544 * tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits) docs: Update Xen-on-KVM documentation for PV disk support MAINTAINERS: Add entry for Xen on KVM emulation i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation hw/xen: Implement soft reset for emulated gnttab hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore hw/xen: Add emulated implementation of XenStore operations hw/xen: Add emulated implementation of grant table operations hw/xen: Hook up emulated implementation for event channel operations hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it hw/xen: Avoid crash when backend watch fires too early hw/xen: Build PV backend drivers for CONFIG_XEN_BUS hw/xen: Rename xen_common.h to xen_native.h hw/xen: Use XEN_PAGE_SIZE in PV backend drivers hw/xen: Move xenstore_store_pv_console_info to xen_console.c hw/xen: Add xenstore operations to allow redirection to internal emulation hw/xen: Add foreignmem operations to allow redirection to internal emulation hw/xen: Pass grant ref to gnttab unmap operation hw/xen: Add gnttab operations to allow redirection to internal emulation hw/xen: Add evtchn operations to allow redirection to internal emulation hw/xen: Create initial XenStore nodes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-08hw/usb/ohci: Implement resume on connection status changeBALATON Zoltan1-6/+17
If certain bit is set remote wake up should change state from suspended to resume and generate interrupt. There was a todo comment for this, implement that by moving existing resume logic to a function and call that. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <35c4d4ccf2f73e6a87cdbd28fb6a1b33de72ed74.1676916640.git.balaton@eik.bme.hu> [PMD: Have ohci_resume() return a boolean] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/usb/vt82c686-uhci-pci: Use PCI IRQ routingBernhard Beschow1-12/+0
According to the PCI specification, PCI_INTERRUPT_LINE shall have no effect on hardware operations. Now that the VIA south bridges implement the internal PCI interrupt router let's be more conformant to the PCI specification. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Rene Engel <ReneEngel80@emailn.de> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <9fb86a74d16db65e3aafbb154238d55e123053eb.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-07hw/xen: Build PV backend drivers for CONFIG_XEN_BUSDavid Woodhouse1-1/+1
Now that we have the redirectable Xen backend operations we can build the PV backends even without the Xen libraries. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Use XEN_PAGE_SIZE in PV backend driversDavid Woodhouse1-4/+4
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is provided by QEMU itself in xen_backend_ops.h. For backends which may be built for emulation mode, use the latter. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Pass grant ref to gnttab unmap operationDavid Woodhouse1-5/+16
The previous commit introduced redirectable gnttab operations fairly much like-for-like, with the exception of the extra arguments to the ->open() call which were always NULL/0 anyway. This *changes* the arguments to the ->unmap() operation to include the original ref# that was mapped. Under real Xen it isn't necessary; all we need to do from QEMU is munmap(), then the kernel will release the grant, and Xen does the tracking/refcounting for the guest. When we have emulated grant tables though, we need to do all that for ourselves. So let's have the back ends keep track of what they mapped and pass it in to the ->unmap() method for us. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-02-27hw/usb/xhci-nec: Replace container_of() by NEC_XHCI() QOM cast macroPhilippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230220150515.32549-8-philmd@linaro.org>
2023-02-27hw/usb/xhci-nec: Declare QOM macros for NEC_XHCIPhilippe Mathieu-Daudé1-2/+4
NEC_XHCI is a QOM object type. Declare its macros / typedefs using OBJECT_DECLARE_SIMPLE_TYPE(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230220150515.32549-7-philmd@linaro.org>
2023-02-27hw/usb/uhci: Replace container_of() by UHCI_GET_CLASS() QOM macroPhilippe Mathieu-Daudé1-3/+2
By using the QOM UHCI_GET_CLASS() cast macro we don't to use the intermediate PCIDeviceClass variable. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230220150515.32549-6-philmd@linaro.org>
2023-02-27hw/usb/uhci: Declare QOM macros using OBJECT_DECLARE_TYPE()Philippe Mathieu-Daudé2-3/+1
The automatic conversion done during commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed this model because the typedefs are in a different file unit (hcd-uhci.c) than where the DECLARE_INSTANCE_CHECKER() is (hcd-uhci.h). Manually convert to OBJECT_DECLARE_TYPE(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230220150515.32549-5-philmd@linaro.org>
2023-02-27hw/usb/ohci: Fix typoPhilippe Mathieu-Daudé1-6/+6
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <03599fd4db313ac4f651cceb43340109ad6a14b8.1676916640.git.balaton@eik.bme.hu>
2023-02-27hw/usb/ohci: Add trace points for register accessBALATON Zoltan2-0/+31
To help debugging add trace points that print values read from or written to the device's registers. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <1bb4985e5dfc1df5a290e77f76fd827ae3592ab7.1676916640.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-27hw/usb/ohci: Move a function next to where it is usedBALATON Zoltan1-30/+30
The ohci_port_set_if_connected() function is only used by ohci_port_set_status(), move next to it to have them at the same place. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <46411d4980ab0fba61ab0d2209a939fdc41eb573.1676916640.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
generated by cgit v1.1 at 2024-11-02 23:55:01 +0000