aboutsummaryrefslogtreecommitdiff
path: root/hw/usb/hcd-ohci.c
AgeCommit message (Collapse)AuthorFilesLines
2016-01-08ohci: clear pending SOF on suspendLaurent Vivier1-0/+3
On overcommitted CPU, kernel can be so slow that an interrupt can be triggered by the device whereas the driver is not ready to receive it. This drives us into an infinite loop. On suspend, if a SOF interrupt is raised between the stop of the device processing and the change of the device internal state to OHCI_USB_SUSPEND (QEMU stops SOF timer on this state change), this interrupt is never acknowledged. This patch clears pending SOF interrupt on OHCI_USB_SUSPEND setting. Some details: - ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ only if the state of the driver (rh_state) is OHCI_STATE_RUNNING. So if this interrupt happens and the driver is not in this state, the function is called again and again, moving the system to a CPU starvation. - ohci_rh_suspend(): the function stop the operation and acknowledge pending interrupts (but doesn't disable it). Later in the function, the device is moved to OHCI_SUSPEND_STATE, and the driver to OHCI_RH_SUSPENDED. If between the moment when the interrupt is acknowledged and the moment when the device is suspended a new interrupt is raised, it will be never acknowledged because the driver is now not in OHCI_RH_RUNNING state. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1452109525-32150-3-git-send-email-lvivier@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08ohci: delay first SOF interruptLaurent Vivier1-3/+13
On overcommitted CPU, kernel can be so slow that an interrupt can be triggered by the device whereas the driver is not ready to receive it. This drives us into an infinite loop. This does not happen on real hardware because real hardware never send interrupt immediately after the controller has been moved to OPERATION state. This patch tries to delay the first SOF interrupt to let driver exits from the critical section (which is not protected against interrupts...) Some details: - ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ only if the state of the driver (rh_state) is OHCI_STATE_RUNNING. So if this interrupt happens and the driver is not in this state, the function is called again and again, moving the system to a CPU starvation. - ohci_rh_resume(): the driver re-enables operation with OHCI_USB_OPER. In QEMU this start the SOF timer and QEMU starts to send IRQs. As the driver is not in OHCI_STATE_RUNNING and not protected against IRQ, the ohci_irq() can be called and the driver never moved to OHCI_STATE_RUNNING. Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1452109525-32150-2-git-send-email-lvivier@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08ohci: fix command HostControllerResetHervé Poussineau1-1/+1
Specification says that: "This bit is set by HCD to initiate a software reset of HC." Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 1450567431-31795-4-git-send-email-hpoussin@reactos.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08ohci: fix Host Controller USBRESETHervé Poussineau1-1/+1
Specification says that, when entering this state, "the contents of the registers (except Root Hub registers) are preserved by the HC. [...] The Root Hub is being reset, which causes the Root Hub's downstream ports to be reset and possibly powered off." Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 1450567431-31795-3-git-send-email-hpoussin@reactos.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-08ohci: split reset method in 3 partsHervé Poussineau1-27/+37
The three parts are: - root hub reset (ohci_roothub_reset) - host controller soft reset (ohci_soft_reset) - host controller hard reset (ohci_hard_reset) Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 1450567431-31795-2-git-send-email-hpoussin@reactos.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela1-7/+4
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-20ohci: fix resource cleanup leakGonglei1-1/+19
When hot-unplugging the usb controllers (ehci/uhci), we have to clean all resouce of these devices, involved registered reset handler. Otherwise, it may cause NULL pointer access and/or segmentation fault if we reboot the guest os after hot-unplugging. Let's hook up reset via DeviceClass->reset() and drop the qemu_register_reset() call. Then Qemu will register and unregister the reset handler automatically. Ohci does't support hotplugging/hotunplugging yet, but existing resource cleanup leak logic likes ehci/uhci. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-17ohci: Complete conversion to realizeMarkus Armbruster1-17/+17
Commit 457215ec "ohci: Use QOM realize for OHCI" converted only "sysbus-ohci". Finish the job: convert "pci-ohci". Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-17usb: Propagate errors through usb_register_companion()Markus Armbruster1-3/+7
This loses the messages explaining the error printed with error_printf_unless_qmp(). The next commit will make up for the loss. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini1-1/+1
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-26ohci: drop computed flags from trace eventsAlex Bennée1-2/+1
This exceeded the trace argument limit for LTTNG UST and wasn't really needed as the flags value is stored anyway. Dropping this fixes the compile failure for UST. It can probably be merged with the previous trace shortening patch. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26ohci: Split long traces to smaller onesAlexey Kardashevskiy1-8/+12
Recent traces rework introduced 2 tracepoints with 13 and 20 arguments. When dtrace backend is selected (--enable-trace-backend=dtrace), compile fails as sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only. This splits long tracepoints. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-23ohci: Convert fprint/DPRINTF/print to tracesAlexey Kardashevskiy1-123/+99
This converts many kinds of debug prints to traces. This implements packets logging to avoid unnecessary calculations if usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled. This makes OHCI errors (such as "DMA error") invisible by default. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29usb-ohci: add exit functionGonglei1-0/+19
clean up ohci resource when ohci pci device exit. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29usb-ohci: Fix memory leak for ohci timerGonglei1-1/+3
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29Fix OHCI ISO TD state never being written back.Jack Un1-2/+2
There appears to be typo in OHCI with isochronous transfers resulting in isoch. transfer descriptor state never being written back. The'put_words' function is in a OR statement hence it is never called. Signed-off-by: Jack Un <jack.un@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-18hw/usb: Add missing 'static' attributeStefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-23migration: Remove unneeded minimum_version_id_oldJuan Quintela1-5/+2
Once there, make checkpatch happy. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-05usb-ohci: Add vmstate descriptorAlexey Kardashevskiy1-8/+111
This adds migration support for OHCI. This defines a descriptor for OHCIState. This changes some OHCIState field types to be migration compatible. This adds a descriptor for OHCIPort. This migrates the EOF timer if the USB was started at the time of migration. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-27hw/usb/hcd-ohci.c: Avoid shifting left into sign bitPeter Maydell1-16/+16
Add U suffix to avoid undefined behaviour. This is only strictly necessary for the 1<<31 cases, but we add it for the other constants in these groups for consistency. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov1-1/+1
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-31Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori1-1/+1
pci, pc, acpi fixes, enhancements This includes some pretty big changes: - pci master abort support by Marcel - pci IRQ API rework by Marcel - acpi generation support by myself Everything has gone through several revisions, latest versions have been on list for a while without any more comments, tested by several people. Please pull for 1.7. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: (39 commits) ssdt-proc: update generated file ssdt: fix PBLK length i386: ACPI table generation code from seabios pc: use new api to add builtin tables acpi: add interface to access user-installed tables hpet: add API to find it pvpanic: add API to access io port ich9: APIs for pc guest info piix: APIs for pc guest info acpi/piix: add macros for acpi property names i386: define pc guest info loader: allow adding ROMs in done callbacks i386: add bios linker/loader loader: use file path size from fw_cfg.h acpi: ssdt pcihp: updat generated file acpi: pre-compiled ASL files acpi: add rules to compile ASL source i386: add ACPI table files from seabios q35: expose mmcfg size as a property q35: use macro for MCFG property name ... Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum1-1/+1
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-02pci-ohci: Add missing 'break' in ohci_service_tdJán Veselý1-0/+2
Device communication errors need to be reported to driver. Add a debug message while at it. Signed-off-by: Jan Vesely <jano.vesely@gmail.com> Acked-by: Gerd Hoffmann <kraxel@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-08-30usb: Pass size to usb_bus_new()Andreas Färber1-1/+1
To be passed to qbus_create_inplace(). Use DEVICE() cast to avoid a direct parent field access. Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh1-6/+6
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-30hcd-ohci: add dma error handlingAlexey Kardashevskiy1-51/+126
Current hcd-ohci does not handle DMA errors. However they may happen so here we introduce simple error handling. On such errors, a typical OHCI will stop operating, signal the guest about the error by sending "UnrecoverableError Event", set itself into error state and set "Detected Parity Error" in its PCI config space to signal that it got an error and so does the patch. This also adds ohci_die() call to ohci_bus_start() to handle possible failure of qemu_new_timer_ns(). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum1-0/+2
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23ohci: Use QOM realize for OHCIHu Tao1-8/+6
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23ohci: QOM'ify some moreHu Tao1-14/+25
Introduce type constant and avoid DO_UPCAST(). Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [AF: Avoid remaining OHCIPCIState::pci_dev uses, rename parent fields] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/[u-x]*: pass owner to memory_region_init* functionsPaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20dma: eliminate DMAContextPaolo Bonzini1-15/+15
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-19usb-core: usb3 streamsGerd Hoffmann1-2/+2
This patch adds support for usb3 streams to the usb subsystem core. This is just adding a streams field / parameter in a number of places. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-22ohci: add missing breakGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-10Make all static TypeInfos constAndreas Färber1-2/+2
Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-07usb: Add an usb_device_ep_stopped USBDevice methodHans de Goede1-4/+26
Some usb devices (host or network redirection) can benefit from knowing when the guest stops using an endpoint. Redirection may involve submitting packets independently from the guest (in combination with a fifo buffer between the redirection code and the guest), to ensure that buffers of the real usb device are timely emptied. This is done for example for isoc traffic and for interrupt input endpoints. But when the (re)submission of packets is done by the device code, then how does it know when to stop this? For isoc endpoints this is handled by detecting a set interface (change alt setting) command, which works well for isoc endpoints. But for interrupt endpoints currently the redirection code never stops receiving data from the device, which is less then ideal. However the controller emulation is aware when a guest looses interest, as then the qh for the endpoint gets unlinked (ehci, ohci, uhci) or the endpoint is explicitly stopped (xhci). This patch adds a new ep_stopped USBDevice method and modifies the hcd code to call this on queue unlink / ep stop. This makes it possible for the redirection code to properly stop receiving interrupt input (*) data when the guest no longer has interest in it. *) And in the future also buffered bulk input. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin1-1/+1
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-11-29usb: tag usb host adapters as not hotpluggable.Gerd Hoffmann1-0/+1
Hotplugging them simply doesn't work, so tag them accordingly to avoid users trying and then crashing qemu. For xhci there is nothing fundamental which prevents hotplug from working, we'll "only" need a exit() function which cleans up everything properly. That isn't for 1.3 though. For ehci+uhci+ohci hotplug can't be supported until qemu gains the capability to hotplug multifunction pci devices. https://bugzilla.redhat.com/show_bug.cgi?id=879096 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-14Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-1/+1
* bonzini/scsi-next: virtio-scsi: use dma_context_memory dma: Define dma_context_memory and use in sysbus-ohci megasas: Correct target/lun mapping scsi-disk: flush cache after disabling it megasas: do not include block_int.h scsi: remove superfluous call to scsi_device_set_ua virtio-scsi: factor checks for VIRTIO_SCSI_S_DRIVER_OK when reporting events scsi: do not return short responses for emulated commands Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-12dma: Define dma_context_memory and use in sysbus-ohciPeter Maydell1-1/+1
Define a new global dma_context_memory which is a DMAContext corresponding to the global address_space_memory AddressSpace. This can be used by sysbus peripherals like sysbus-ohci which need to do DMA. In particular, use it in the sysbus-ohci device, which fixes a segfault when attempting to use that device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2012-11-08usb: split packet result into actual_length + statusHans de Goede1-9/+17
Since with the ehci and xhci controllers a single packet can be larger then maxpacketsize, it is possible for the result of a single packet to be both having transferred some data as well as the transfer to have an error. An example would be an input transfer from a bulk endpoint successfully receiving 1 or more maxpacketsize packets from the device, followed by a packet signalling halt. While already touching all the devices and controllers handle_packet / handle_data / handle_control code, also change the return type of these functions to void, solely storing the status in the packet. To make the code paths for regular versus async packet handling more uniform. This patch unfortunately is somewhat invasive, since makeing the qemu usb core deal with this requires changes everywhere. This patch only prepares the usb core for this, all the hcd / device changes are done in such a way that there are no functional changes. This patch has been tested with uhci and ehci hcds, together with usb-audio, usb-hid and usb-storage devices, as well as with usb-redir redirection with a wide variety of real devices. Note that there is usually no need to directly set packet->actual_length form devices handle_data callback, as that is done by usb_packet_copy() Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25usb: Add an int_req flag to USBPacketHans de Goede1-2/+5
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25usb: Move short-not-ok handling to the coreHans de Goede1-2/+2
After a short-not-ok packet ending short, we should not advance the queue. Move enforcing this to the core, rather then handling it in the hcd code. This may result in the queue now actually containing multiple input packets (which would not happen before), and this requires special handling in combination with pipelining, so disable pipleining for input endpoints (for now). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-25usb: Add USB_RET_ADD_TO_QUEUE packet result codeHans de Goede1-0/+2
This can be used by usb-device code which wishes to process an entire endpoint queue at once, to do this the usb-device code returns USB_RET_ADD_TO_QUEUE from its handle_data class method and defines a flush_ep_queue class method to call when the hcd is done queuing up packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-2/+2
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05cleanup useless return sentenceAmos Kong1-2/+0
This patch cleans up return sentences in the end of void functions. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-08-31usb: unique packet idsGerd Hoffmann1-2/+2
This patch adds IDs to usb packets. Those IDs are (a) supposed to be unique for the lifecycle of a packet (from packet setup until the packet is either completed or canceled) and (b) stable across migration. uhci, ohci, ehci and xhci use the guest physical address of the transfer descriptor for this. musb needs a different approach because there is no transfer descriptor. But musb also doesn't support pipelining, so we have never more than one packet per endpoint in flight. So we go create an ID based on endpoint and device address. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-27usb-ohci: Use universal DMA helper functionsDavid Gibson1-42/+51
The OHCI device emulation can provide both PCI and SysBus OHCI implementations. Because of this, it was not previously converted to use the PCI DMA helper functions. This patch converts it to use the new universal DMA helper functions. In the PCI case, it obtains its DMAContext from pci_dma_context(), in the SysBus case, it uses NULL - i.e. assumes for now that there will be no IOMMU translation for a SysBus OHCI. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-07-22 05:26:16 +0000