aboutsummaryrefslogtreecommitdiff
path: root/hw/usb-msd.c
AgeCommit message (Collapse)AuthorFilesLines
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-1/+1
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16block: Simplify usb_msd_initfn() test for "can read bdrv key"Markus Armbruster1-1/+1
The old test assumes that "hotplugged" implies "we have a current monitor for reading the key". This is in fact true, but it's not obviously true. Aside: if it were false, we could pass a null pointer to monitor_read_bdrv_key_start(), which would then crash. The previous commit permits us to check for "we have a current monitor" directly, so do that.
2010-02-25Fix -usbdevice crashPaul Brook1-0/+3
If -usbdevice is used on a machine with no USB busses, usb_create will fail and return NULL. Patch below handles this failure gracefully rather than crashing when we try to init the device. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-10block: add topology qdev propertiesChristoph Hellwig1-6/+6
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster1-3/+2
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Separate USB product description from qdev nameMarkus Armbruster1-0/+1
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09scsi: move scsi-disk.h -> scsi.hGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30usb-storage: use qdev for -usbdeviceGerd Hoffmann1-8/+25
Hook up usb_msd_init. Also rework handling of encrypted block devices, move the code out vl.c. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Check return value of qdev_init()Markus Armbruster1-1/+2
But do so only where it may actually fail. Leave the rest for the next commit. Patchworks-ID: 35167 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05drive cleanup fixes.Gerd Hoffmann1-8/+0
Changes: * drive_uninit() wants a DriveInfo now. * drive_uninit() also calls bdrv_delete(), so callers don't need to do that. * drive_uninit() calls are moved over to the ->exit() callbacks, destroy_bdrvs() is zapped. * setting bdrv->private is not needed any more as the only user (destroy_bdrvs) is gone. * usb-storage needs no drive_uninit, scsi-disk will handle that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05scsi: hotplug windupGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann1-2/+0
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch scsi bus to inplace allocation.Gerd Hoffmann1-3/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/scsi+usb: convert usb-storage to qdev.Gerd Hoffmann1-27/+40
Full coverage with properties and everything. You can add virtual usb sticks this way now: -drive if=none,id=pendrive,path=/some/where -device usb-storage,drive=pendrive -usbdevice disk:/path/to/image continues to work. Other side effects: usb storage is listed in 'info block' now. kvm tree should be able to boot from usb via extboot (untested though). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/scsi: add scsi bus support to qdev, convert drivers.Gerd Hoffmann1-11/+15
* Add SCSIBus. * Add SCSIDeviceInfo, move device callbacks here. * add qdev/scsi helper functions. * convert drivers. Adding scsi disks via -device works now, i.e. you can do: -drive id=sda,if=none,... -device lsi -device scsi-disk,drive=sda legacy command lines (-drive if=scsi,...) continue to work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann1-15/+30
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl1-3/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-03-05monitor: Rework modal password input (Jan Kiszka)aliguori1-2/+8
Currently, waiting for the user to type in some password blocks the whole VM because monitor_readline starts its own I/O loop. And this loop also screws up reading passwords from virtual console. Patch below fixes the shortcomings by using normal I/O processing also for waiting on a password. To keep to modal property for the monitor terminal, the command handler is temporarily replaced by a password handler and a callback infrastructure is established to process the result before switching back to command mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework early disk password inquiry (Jan Kiszka)aliguori1-3/+3
Reading the passwords for encrypted hard disks during early startup is broken (I guess for quiet a while now): - No monitor terminal is ready for input at this point - Forcing all mux'ed terminals into monitor mode can confuse other users of that channels To overcome these issues and to lay the ground for a clean decoupling of monitor terminals, this patch changes the initial password inquiry as follows: - Prevent autostart if there is some encrypted disk - Once the user tries to resume the VM, prompt for all missing passwords - Only resume if all passwords were accepted Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori1-2/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21Add image format option for USB mass-storage devicesaurel321-1/+30
(fix CVE-2008-1945) Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5059 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-10SCSI cleanup, by Laurent Vivier.ths1-8/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3797 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-1/+4
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths1-2/+2
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-6/+6
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-30Remove repeated code and enable encrypted SD cards and USB sticks images.balrog1-0/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2750 c046a42c-6fe2-441c-8c8c-71466251a162
2007-03-31Fix usb hid and mass-storage protocol revision, by Juergen Keil.ths1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2558 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-29SCSI TCQ support.pbrook1-57/+156
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2139 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-19delete block devicebellard1-1/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2126 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-12SCSI and USB async IO support.pbrook1-16/+52
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2107 c046a42c-6fe2-441c-8c8c-71466251a162
2006-07-19usb destroy API change (Lonnie Mendez)bellard1-6/+10
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2066 c046a42c-6fe2-441c-8c8c-71466251a162
2006-06-26display device identifier string for user with info usb (Lonnie Mendez)bellard1-0/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2029 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-26SCSI lun probing fix.pbrook1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1945 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-25Rearrange SCSI disk emulation code.pbrook1-0/+395
Add USB mass storage device emulation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1940 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.1 at 2024-12-29 18:56:05 +0000